Open hub for Inventory data

Experts,
We have a requirement where we need to push out Inventory data from BW to third party systems.
We have a daily cube and monthly snapshot cube implemented.
Now, there are fields that the third party systems require including Movement type. There are 500K movements everyday so putting this field in the cube would make the cube huge. Can we have another DSO loaded only by 2LIS_03_BF that supplies data to the third party systems via Open Hub in addition to the model we currently have?
Would this be a good design or rather would it work(in theory)??

Hi,
Yes you are thinking in correct direction. Adding movement type to cube will unneccessarily increase the data volume.
Cubes are not meant for detailed data.
I would suggest to go ahead with the DSO approach. The open hub will work with DSO.
Regards,
Geetanjali

Similar Messages

  • Open hub for PSA to Database Table...

    Hi
    My requirement is to use Open Hub for loading data from PSA (DataSource) --> to some BI table.
    Question is: Can i make Data Source as Source of Transformation for Open Hub?
    Once i try to do, i get an error of "Cannot connect DataSource to Open Hub Destination"
    If we can't use Data Source as source of transformation in Open Hub, could u pls. suggest another way to fulfil my requirement. I dont want to create Infoprovider from my DataSource for Source of my Open Hub.
    Thanks

    Hi Harpal,
    You can have data source as source of your transformation for Open Hub Destination.
    Just check if your data source is active in the system or not.
    Regards,
    Durgesh.

  • Open Hub For BPC Cubes

    Hi Gurus,
    I have an issue about the open hubs for BPC cubes. I have a need to take my transactional data from my BPC cube to a table.So  I want to create an open hub on my BPC planning cube.
    But when i create the open hub on BPC cube, it doesn't read the package. So, data cannot be read. But the open hubs work on my BW cubes.
    Is there anything i should do different for BPC cubes ? How can i make the open hub work?
    Thanks in advance..
    Fatih

    Hi Fatih,
    Glad you got this working, but a word of warning: As far as I am aware, customer SAP BW development linked to objects in the BPC namespace is not supported. It may very well work, but BPC may also delete and recreate BW objects at any time and without warning, which can leave you in a situation in your production environment that is very difficult to recover from without manual modification of the production BW environment.
    The recommended way to export data from BPC NW into a flat table is to use the BPC data manager Export package. You may want to try this option and see if you can meet your requirements this way.
    Ethan

  • Marker update for Inventory data sources

    Hi all,
    why we use marker update in Cube manage for inventory data sources at the time of loading?
    i heard that to avoid the keyfigures cumulation we do check that option ,is that correct/
    please clear my doubt
    thx

    HI
    (2LIS_03_BF Goods Movement From Inventory Management-------Unckeck the no marker update tab)
    (2LIS_03_BX Stock Initialization for Inventory Management--
    ---select the no marker update check box)
    2LIS_03_UM Revaluations -
    Unckeck the no marker update tab)
    in the infopackege of "collaps"
    Cheers

  • Opening stock for inventory cube for april 2011

    Hi all,
    I have loaded the issues and reciepts (material movements from 2li_03_bx) and it is working fine.
    How to obtain the opening balance for 04.2011
    I can see there is on key figure 0valstkvalue which is non cumulative key figure which stores the last value.
    if use the key figure and use an offset based upon the calendar year month i will obtain the closing balance of 03.2011 which is the opening balance of 04.2011.
    but then last month 03.2011 only contains issues and receipts and it doesnt contain the opening balance
    i will given an example
    opening balance 04.2011 ( to be obtained)   
    issues : 120
    receipts : 130
    closing without opening is 10
    month of 03.2011
    issues : 150
    receipts : 200
    closing is 50 without opening
    if i use the ovalstk value key figure i am getting only 50 as closing balance which is wrong as per the user
    can you pls advise how to get the correct opening balance for 04.2011
    thanks

    Hi murali,
    My earlier month thats is 03.2011
    will contain only
    issues and reciepts isnt it . and it doesnt contain opening balance isnt it???
    so only issues - receipts will give the closing balance 
    for eg 03.2011
    issues = 100
    receipts = 120
    closing balance = 20 but the users data is 40 is the closing balance since opening balance is 20 for 03.2011
    Can you pls let me know how to handle it geting closing balance 20 plus adding the opening balance of 03.2011 too
    which gives 40 as closing balance for 03.2011
    thanks

  • Process keys maintenance  for Inventory data

    Hi,
    Can any one suggets the Procedure for to maintain the Process keys at the time of extracting  Inventory data from Ecc6.0 to BI 7.0.
    Thanks,
    Chandra G

    Hi Reddy,
    first of all thanks for your quik Response.
    BI consultant need to maintain the process key(transaction keys) or MM consultant. when i see that path, already some transaction keys are maintaining for MM there like
    aplication component          application   operat    Description
    MM                                      02                   1          Purchase order/vendor
    MM                                      02                   2         Goods Receipt
    MM                                      02                   3         Invoice/Vendor
    is we need to do any other New Entries or Settings
    Regards,
    chandra G

  • Project cannot open: "Searching for Movie Data" in render file

    My feature-length project suddenly stopped loading today, pausing at 47% to complain that a bunch of render files are missing, and that "this movie cannot play without the file..." I've seen these error messages when trying to open Quicktimes that refer back to files that no longer exist, but not when trying to open an FCP project file. My autosaves are giving me the same problem. The render it lists is "Rough Cut" something or other, which refers back to sequences I haven't used in weeks.
    I've done the usual fixes: restarting, throwing out preferences. I ran FCPRescue. I opened a blank project and did a Render Manager dump. I did a Render Manager dump earlier today (as part of my workflow), but didn't have any problems at the time. I don't know how to get around this, and I don't know why those files are supposedly missing.
    There's an earlier post about the same problem, but he didn't find a solution. Thanks for any and all help!
    Quad G5 2.5GHz   Mac OS X (10.4.4)   2.5GB RAM, 2X250GB SATA internal, dual monitors

    It sounds like you used a reference quicktime in your project and the media that the quicktime referenced is deleted or that the system has some how or other lost track of it. This can be a tricky problem to fix. Andy's advice may get you up and running, but you will still be unable to work with the problem quicktime. I always try to export selfcontained qt's because of this potential problem.

  • How to get rid of zeros for the data which has been extracted with open hub

    Hi all
    I am trying to extract data from the cube thru an open hub, but the data which i have extracted, for a cost center i am able to see '0's which is expected to be an empty space, even in cube there is an empty space.
    Can anyone suggest me quickly, points will be rewarded
    thanks
    preethi......

    In the transformation of the Open Hub,use BAPI....
    Create a target structure with all fields as type characters,move data from source structure to target structure in the BAPI using ABAP codes.When there is no value in character fields it would not show up 0's.

  • Export data from BW to oralce with open hub service.

    Hi Dear all,
    When I tried to export data from BW to oralce with open hub service. There is no available RFC destination for this oracle system. That means i need to create a RFC destination for the oracle server.
    How can i achive this, in SM59? But U don't know much how to configure this. Is there any expert can help me there?
    Kevin

    Hi kevinhuang  ,
    RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
    or
    RSA1-->Source systems and then right click on Source system and Check
    To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
    Pls go thru this links,
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
    BI Open Hub Destination and data transfer process setup
    http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
    Hope this helps U.
    Regards
    Chandra Sekhar
    Edited by: Chandra  Sekhar T on Apr 21, 2009 3:36 PM

  • Open Hub in BW 3.1

    Hi,
    Can someone please clarify me about open hub steps in SAP BW version 3.1. I no more have access to 3.1 system as of now but has to put my views for a new development strategy. I am not sure whether it had something like InfoSpoke what we use in version 3.5 (I worked in 3.5 too).
    Also if you can throw some light on its licensing then it would be great. I am not sure license would be required or not when customer uses open hub to extract data from SAP BW 3.1 InfoProvide.
    Ritika Sharma

    I need to clarify if any of you have idea about SAP BW 3.1, whether it has InfoSpoke? And will our customer need to have license if data from InfoProviders has to be extracted?
    We have to use InfoSpoke as a one time activity to extract data from SAP BW InfoProviders.
    Any clarification on the same would be appreciated.
    Ritika Sharma

  • Open Hub does not work after upgrade

    We just upgraded our BW production system from 3.0b into 3.5 and we are running support package level 09. Now we are facing serious problems with Open Hub.
    After upgrade Open Hub delivering data from infocube into
    csv-files does not work. When running the InfoSpoke it
    will deliver 0 data records even though it should bring considerable amount of data.
    There is no error message or short dump, it just do not deliver any data. InfoCube has data in place and it is available for reportoing. Extraction is made in FULL-mode and there is no transformations. Funny thing is that extraction from ODS or InfoObject works perfectly fine.
    Has anyone idea how to solve this?
    Thanks in advance,
    JL

    We ran into the same issue as Jari Laine today.
    We just upgraded our BW sandbox environment from 3.0b into 3.5. We are running support package level 13, though. Now we are facing serious problems with Open Hub.
    After the upgrade, our Open Hub which delivers data from an info cube into CSV-files does not work any more.
    When running the Info Spoke it will deliver 0 data records even though it should bring a considerable amount of data.
    There is no error message or short dump, it just does not deliver any data. The Info Cube has data in place and it is available for reporting.
    The Extraction is made in FULL-mode and there are no transformations.
    Has anyone an idea how to solve this?
    Thanks in advance,
    Marc

  • Open Hub queries

    Hallo Experts,
    I would like to get some help on questions related to Open Hub for BW30.
    May I know:
    1. From the OpenHub Model (Execution-Time), the Data Packages are IN & OUT. Are these what are referred to as Structures /BIC/CY<> and /BIC/CZ<> ?
    2. What is the practical way commonly used to manage the flatfiles for Open Hub given that names cannot be changed.
    3. What situation will cause the fields of an infoprovider to not appear in the Selection tab of infospoke? I cannot see the fields nor set them there.
    4. Can DBConnect be used to transfer OpenHub table to external DW/Datamarts?
    regards,
    Mirella

    Hi, Michael -
    I apologize for taking so long to respond - I hadn't bothered to check if there was a response.  I believe your question is asking the difference between the solution to use literal filename vs. logical.  If this is the question, the difference is that the literal filename will open up the file name/path parameter on the infospoke screen and allow a user to directly specify a custom entry rather than the alternative to set it up using tables.  I originally started by implementing the logical filename/path;however, my client did not want to have to maintain the table which required user access.  I hope that answers your questions - feel free to contact me if you have further questions/comments Thanks!

  • Open Hub Extraction

    Hello
    I am doing a open hub and sending data to a file. Now in the file i want to maitain the header line(description of field) for the fields i am sending to the file.  How can i do that. Please can someone explain me a little bit in brief.
    thanks

    Hi,
    Once u run the Infospoke, it will generates two files, data file and schema file. The data file contains the data and the schema file contains the deader or the structure of the Infospoke. So if u want to maintain the header in the data file, u just copy the list of InfoObjects name and paste it on the header file.
    Thanks & Regards
    Ramakrishna Kamurthy

  • Importing table using Open Hub - (BODI - 1112339)

    Hi all
    We could connect to the open hub for SAP BW 7.0 hosted in a remote server . Then tried to import the tables created there. However it stops us with:
    " Error: Cannot import the metadata table xxxx.
    Parser detected an unknown data type. Please notify Customer Support. (BODI - 1112339)."
    Have you any idea why it's happening?
    Thank you.

    Hey guys
    thanks anyway iam using open hub to export data to other sources by creating a file and Ftp the same.
    some one responding to the question posted 2 yrs back..!
    anyway thanks this is resolved. Thank u
    Regards

  • Export Quanityfields with Open Hub

    Hi,
    i want to export an field (with type Quanity with fixed unit kg) with an Open Hub into a csv-file.
    All other fields (type currency and characteristics) are written into the csv-file. Only the quantity fields are blank.
    Do I have to use any conversion exit? Anything special in the Infoobject or transformation to care about?

    Hi kevinhuang  ,
    RFC connection.......... You can check in SM59 tcode...Double click on the the desired Source system
    or
    RSA1-->Source systems and then right click on Source system and Check
    To test RFC connection...RSA1 ....Source system....... Right click on desired source system >> Connection Parameter.....Test connection
    Pls go thru this links,
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
    BI Open Hub Destination and data transfer process setup
    http://www.ibm.com/developerworks/data/library/techarticle/dm-0802li/index.html
    Hope this helps U.
    Regards
    Chandra Sekhar
    Edited by: Chandra  Sekhar T on Apr 21, 2009 3:36 PM

Maybe you are looking for

  • Customer service complaint / Rude phone rep Rachel

    I am a 10+ year loyal Verizon Wireless customer.  I have long sung the praises of Verizon and convinced my family members to use Verizon..which they do.  I have had the occasional...I think 2 past minimal overages and have happily paid for those over

  • How do i change the format of a single page in pages 09?

    How do i change the format of a single page in pages 09? I want a page to be landscape within a portrait-format doc.

  • 3.1.2 Not working???

    I have had the problem where i wont be able to recieve any calls or texts etc. and was really hoping 3.1.2 would solve this but to much dismay my phone is still experiencing the exact same problems. Everyone looks like they have had success with the

  • Problem with loading data using SQL LOADER

    I am having following files with me when i run following command at command prompt sqlldr scott/tiger@genuat control =c:\emp.ctl then giving error as SQL Loader 500: unable to open file SQL Loader 553: file not found emp.dat file data 1111,sneha,CLER

  • SRM MDM Catalog -Service Item

    Hi guys, We got a standard SRM MDM catalog implementation with OCI configuration handling all the item mapping. I run into issues when I flag an item as a "Service Item" in MDM by using the default provided flag MDMSRM_SERVICE_ITEM. This flag, when s