Open Item List Report Display Branch Wise
Hi,
I want to restrict user from viewing Open Item List Report For All the Branch.If the user logged from One Location named Kolkata then he will be able to see the Open Item List Report For Kolkata Branch Only
not the data for all the Branch .How to do this authentication since it is required urgently on Open Item List Report .
Waiting For Reply ???...
Regards,
Amit Sharma
Hi,
One Database contains all the branches which is initialised in the Location Master Form .
I am using one database only
Regards,
Amit Sharma
Similar Messages
-
Error when opening open item list report
Hi Experts,
I was trying to open inventory open item list but I'm getting error. The user is a "super user".
Thanks,
JaniceHi,
It is an application error. Check SAP note:
2008925 - You cannot run the Open Item List report for Purchase
Requests
Thanks & Regards,
Nagarajan -
Print Layout Designer / Open Items List Report
When I open the Reports>Sales and Purchasing>Open Items List report - How can I associate a different Print Layout depending on which Document Type is then selected from the drop down list..
Eg. When I print a list of Open Purchase Orders I want to us a different print template than when I print a list of Open Sales Orders ?
Thanks for any pointers..
KarenHello ...
You must enter the LDP clicking the pencil icon that appears in the toolbar when the window is open open items list.
Once there, create 2 new text fields, one with the text "Orders" and another that says "Customer Orders". Both fields were identified as Field_XXX and Field_YYY (where XXX and YYY are numbers that appear in their fields)
There is a field of variable rate system, which is what lets you see the description of the type of document. (Orders, Customer Orders, etc.).. This field corresponds to variable 100 (check it that way), we assume that this field is the field F_ZZZ within the layout.
Create 2 fields of type formula, the formula to edit it (Field_XXX == Field_ZZZ) and (Field_YYY == Field_ZZZ) respectively.
Create 2 text fields (these are only to test the application, then to understand the functionality can not delete them or leave them visible). Set in one of these areas, the letter "A" in the second field and set the letter "B". both camps can put one over the other in the layout.
Now comes the application of the field ... "A" condicionelo one of the formula fields and country "B" condicionelo another formula field. The conditional mode is to set the formula field in the general tab LINK A. ..
Try then see a preview of both reports and can see that depending on the type of document you will see "A" or "B" as appropriate.
Apply the same logic as those fields that you will create and generate the difference between formats.
I hope this will be helpful
Best Regards, -
Dear Experts,
We are facing a problem in Open Item List Report. When we execute the report and try to give the filter for customer name it is listing only customer starting with "A" eventhough we have open item for other customers also.
How to solve this issue? How to list all the customer/vendor names in filterHi,
Here the content of the note:1012827
Filter table function displays up to 499 values
Symptom
Using the filter table causes only 499 values to be displayed under the
Value and Value To drop-down menus.
Other terms
Performance, limitation, 499, 500, values, filter, table, combo box.
Reason and Prerequisites
This behavior is to prevent a performance problem. A combo box that holds more than 499 values may cause poor performance. In addition, it is not convenient for the user.
Solution
This behavior conforms to the SAP Business One definition.
As a workaround export the result to excel then apply filter.
Hope this helpful -
Open items list, authorization
When I give authorization to a user under Authorizations>>Reports>>Sales Reports>>Open Items List - Full Authorization, the Open Items List does not show up in Reports (as it does for the super users).
We are using SAP B1, 2007 A, sp: 01 pl: 08.
Thank youHi Gordon,
Yes, this user has a professional license. Under Sales A/R, they can open the Docuemnts Draft Report, Sales Analysis, and Backorder report.
Another professional license user is also unable to see the Open Items List, even with Full Authorization in the Reports authorization. The only users that see the Open Items List report are the 2 we have set as superusers.
Thanks -
Closed base Document appears in the open item list
Hi all,
While we are fully copying a base document to a target document, the base document header and rows will be closed, but it will appear in the open item list report.
So the customer has created a Sales Order -> Delivery -> A/R Invoice.
The Sales Order document status gives 'Closed', but still appears in the Open Item list (Sales - AR --> Sales Reports --> Open Items List).
The customer using: SBO2005A PL22
Further i also have looked in the SAP Notes (Note 1083366) but i can't solved it.
Thanks in advance.Chief,
In open items list of sales order,
*select reqd. sales order,net amount,tax & total amount open in
sales order,
also open delivery document & compare with it,
there must be difference in tax total/total/they
must have changed quantity,unit price,date,changed payment terms/tax codes which causes delivery created without reference to sales order.
That's why sales order is open.
You can manaully close sales order by Data-->Close.
Jeyakanthan -
Hi,
Can we make UDF in Open item list report or Form/Batch number update form.Hi,
Are you referring below screen shots for adding UDF?
Thanks & Regards,
Nagarajan -
Grouping customers and view customer open items list - Group wise
Hi.
I have some requirement from my client.
He says that he want to view customer open items list group wise.
In FBL5N we can give the selection of multiple customers. But he wants to group the specific customers and then view the open items for this group.
For example: Client has 10 customers and out of these customers he wants to select and group 5 customers. And then he want to view open items list for this group.
Can anyone help me how to group these specific customers in the total customers list. Also request you to provide me the option to view open items for this group of customers.
Regards,
PadmavathiHi Padmavathi,
It is possible. use Worklist for Customers.
Go to OB55 and define a Worklist for Customers, and mention the list of Customers that you want to see under that Worklist.
After this, when you to to FBL5N, you will get an option to select Worklist to run the list of open items.. and it would show open items of all customers that you have defined in your worklist.
Also note that you will have to go to FB00, tab Line Items, and tick Worklists available. This is at User Level, so only that user will be able to see the worklist in his FBL5N transaction code.
Regards,
SAPFICO
Edited by: SAPFICO on Feb 10, 2011 11:43 AM -
Dear Expoerts,
Business One 2005A:
How to restore or rectify the 'missing item' on the Open Item List?
There is an item shows Commiited 10 however there is no corresponding Sales Orde.
Since there is no stock therefore data shows Available -10.
How can we purge this bug because we tried Goods Issue and Restore, neither methods can do anything about it.
Your advice will be very much appreciated.
Kunitomo
Tokyo, JapanDear Gordon,
Yes, i'm sure. When i test it, i copy Sales Order (eg. got 5 items - 4 of 5 item is 0 amt) to Delivery Order (got 5 items - 4 of 5 items is 0 amt). Then i delete the row of 4th & 5th item with 0 amt.
FROM Sales order:
Example: 1) Item A $1,000.00
2) Item B $0.00
3) Item C $0.00
4) Item D $0.00
5) Item E $0.00
To Delivery Note:
Example: 1) Item A $1,000.00
2) Item B $0.00
3) Item C $0.00
4) Item D $0.00 (Delete row in Delivery Order)
5) Item E $0.00 (Delete row in Delivery Order)
After i check the Open Item List - the amt, net & tax do not show the figure for this Sales Order. The Sales order just show $1,000.00 in "Original Amount" in Open Item List.
Please check for me, the SAP B1 system std is like that?
Thank you.
Regards,
Sheon -
Open Items List contains closed Document
Hi guys,
Hope you can assist? I have a client with a issue on the Open Items List, whenever she opens the report for A/P Down Payments - Not Yet Fully Applied and A/R Down Payments - Not Yet Fully Applied it brings up a list of Documents but when you view the document the status is Closed. Some of these transactions are dated back to 2005.
Have any of you seen this before?
Regards,
Desiré Janse van RensburgHi,
Please refer my last reply in this thread:
A/R Down Payment Full Applied - Open Item
Thanks & Regards,
Nagarajan -
Hi all,
Could you please advise if itu2019s possible to run a query in SAP based on the Open Items List in the reporting area that can detail the following;
Both AR Invoices and Credit Notes and show additional fields, taken from the AR invoice u2013 Account Manager, Item Group and Project Code?
The Project Code and Item Group can be taken from the Item Line however the Account Manager field is located below the item line area on the contents tab.
Would someone have a query which might enable us to do this or at least give us a directing to go in ?
Thank you,
MBHi Matthew,
You can try this one.
It will check if the document is open on document level. The query is written so that it will give a result for every line in the document so you might have a problem if there are many line per document. For the account manager I used Sales person, I am not sure if that is what you mean.
select
'AR Invoice'+' '+(convert(varchar (10), t0.docnum)) as 'Document',
(select t7.slpname from oslp t7 where t7.slpcode = t0.slpcode) as 'Account Manager',
(select itmsgrpnam from oitm t5 inner join oitb t6 on t5.itmsgrpcod = t6.itmsgrpcod
where t5.itemcode = t1.itemcode) as 'Item Group',
t1.project
from
oinv t0 inner join inv1 t1 on t0.docentry = t1.docentry
where t0.docstatus = 'o'
union
select
'AR Credit'+' '+(convert(varchar (10), t0.docnum)) as 'Document',
(select t7.slpname from oslp t7 where t7.slpcode = t0.slpcode) as 'Account Manager',
(select itmsgrpnam from oitm t5 inner join oitb t6 on t5.itmsgrpcod = t6.itmsgrpcod
where t5.itemcode = t1.itemcode) as 'Item Group',
t1.project
from
orin t0 inner join rin1 t1 on t0.docentry = t1.docentry
where t0.docstatus = 'o'
Let us know if it works out.
Jesper -
Aged open items revaluation report
I was wondering if anyone knows of a report that would give you the same information as the open items revaluation report only aged. The aging reports that are in the system are only point in time. We're looking for an historical aging report. Does anyone know if a report like that exists?
Thanks,
ToddHello ...
You must enter the LDP clicking the pencil icon that appears in the toolbar when the window is open open items list.
Once there, create 2 new text fields, one with the text "Orders" and another that says "Customer Orders". Both fields were identified as Field_XXX and Field_YYY (where XXX and YYY are numbers that appear in their fields)
There is a field of variable rate system, which is what lets you see the description of the type of document. (Orders, Customer Orders, etc.).. This field corresponds to variable 100 (check it that way), we assume that this field is the field F_ZZZ within the layout.
Create 2 fields of type formula, the formula to edit it (Field_XXX == Field_ZZZ) and (Field_YYY == Field_ZZZ) respectively.
Create 2 text fields (these are only to test the application, then to understand the functionality can not delete them or leave them visible). Set in one of these areas, the letter "A" in the second field and set the letter "B". both camps can put one over the other in the layout.
Now comes the application of the field ... "A" condicionelo one of the formula fields and country "B" condicionelo another formula field. The conditional mode is to set the formula field in the general tab LINK A. ..
Try then see a preview of both reports and can see that depending on the type of document you will see "A" or "B" as appropriate.
Apply the same logic as those fields that you will create and generate the difference between formats.
I hope this will be helpful
Best Regards, -
Open Items List- Missing Items
Dear all,
In the open items list there is an option in drop down for missing items. When we select the option some items and its details get listed. What is the information being communicated by this selection?
Thanks in advanceHi!
Select the option Missing Items to display a list of all items with available quantity lower than zero. -
HI Experts,
want to open items list with customer id,fiscal year,posdting date,document date,currency reference,amount and Gl accounts..
where i can find and download this..
i tried through fbl5n but not worked..
please anyone give me idea from where i can download thgis data into Excel sheet..
Regards
PTHi Rau,
I tried from se38 but it saying no such reports..
thansk for your reply.
as i am not a functional guy..one request came i have to do this.
Regards
PT -
Adding a button to the Open Items List
Hiya everyone, I am trying to add a button to the Open List Items form (formType - 152) which is located in Reports -> Sales & Purchasing -> Open Items List. When I attempt to add a button to that particular form it does not appear. The only form I seem to be be able to add a button to is on the main menu. I have added my code below:
Private Sub CreateMySimpleForm()
Dim oItem As SAPbouiCOM.Item
Dim oButton As SAPbouiCOM.Button
oForm = SBO_Application.Forms.ActiveForm
oItem = oForm.Items.Add("80", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oItem.Left = 6
oItem.Width = 65
oItem.Top = 51
oItem.Height = 19
oButton = oItem.Specific
oButton.Caption = "View Document"
End Sub
Has anyone got any ideas.....ThanksI have discovered that the button appears if the Open List Items window is open when I run my code so the button can actually appear on that form. However, how do I change this line :
oForm = SBO_Application.Forms.ActiveForm
so that it specifies that the button will appear only on the Open List Items form. When I change that line to:
oForm = SBO_Application.Forms.GetForm("152",1 ) ....it keeps on complaining that it cannot find that form.
I'm not sure what the Count is supposed to be in:
GetForm(Type As String, <b>Count</b> As Integer)
If anyone could help me out I would be grateful.....Thanks
Maybe you are looking for
-
Read Tilda separated file from Application Server
I have a requirement to read a tilda separated file from application server and write a tilda separeted output to application server. Please suggest how to to get data from tilda separated file to internal table ? and also How to create a tilda separ
-
Clip is tinted in green with DV pal QT
Two clips which are colour corrected in FCP appears fully green after exporting to Quicktime as a DV Pal anamorphic file. Same clips appear normal when I export them to a QT movie with the original DVC Pro HD settings. Any ideas what to do ? Thanks.
-
I am streaming music and photos from my Window Media Centre; all is fine until I close down iTunes and place the Apple TV in Standby. When I reopen iTunes and the Apple TV the photos cannot be found; it basically comes back with the message 'there ar
-
PhotoShop 7 crashes at startup with a fatal error in Leopard
I just installed Leopard and now I cannot use PhotoShop 7. Since I cannot afford the outragous upgrade to CS3 does this mean I am stuck with no photo editing ? I Love Leopard but I really need to work in PhotoShop, I am regretting the upgrade now Whe
-
Downloaded iPad update and now i can't get wifi for my personal hotspot
downloaded ipad update and now I cant seem to be able to use the wifi from my personal hotspot.