Open link in object link for calling sap R/3 Transaction.

Hi all,
Can anyone help with the steps to be done in order to call an SAP Transaction in cProjects via services to Object Links. We succeeded to get the object links from R/3, we are  able  to see the 'open' link under 'Application' in the Object Link Tab for  some of the object type like Routing, Inspection Plan .
1. But some of the Object Types like Documents from DMS Etc can be selected and linked but does not have any 'Open'  link(blank).
2. But some of the object types are not searchable. (The search provided no results; Choose other search criteria ) Message is appearing even though we give the correct search criteria.
Pls guide me to solve the issue
Thank you,
Ramesh.

Hi Dev,
as this thread has been closed in the meantime (the original poster seemed to have found the solution by himself), I'd suggest you post your question as new one.
Or you check the material you can find at [service.sap.com] at the SAP Support Portal. E.g. Release & Upgrade Info >  Installation & Upgrade Guides  > SAP Business Suite Applications > SAP PLM using cProject Suite 4.5 > cProjects: Guide for Implementing Object Links
I think inside this document you can find all the information you need.
Best regards,
Thomas

Similar Messages

  • Linked Wordpad Object in Asynchronous call

    Hi everyone,
    I detect an issue when loading reports in asynchronous mode:
    1: I have a linked Ole object to a wordpad document saved in disk.
    2: When calling report.load in normal(synchronous) way it loads the report just fine.
    3: When calling report.load in an asynchronous thread (server side), the thread just enters in a 'limbo' state and i can't debug it anymore. Worse, somehow it launches 3 winword processes that steels 100% cpu usage. I have to kill the winword processes before i get a message to get rid of cpu memory space.
    I know its weird but have someone experienced the same problem before?
    Can anyone help me with this?
    Thanx

    Well, I solved the problem... it had nothing to do with being sync or async...
    The problem was in the report. Having a specified default printer when opening the report at design, if the operating system doesn't find the printer, it gives a warning message.
    When doing report.Load at runtime, the system freaks out and has the problem specified at first post.
    If the report doesn't have a default printer it works fine with no problem.
    Hope this helps someone

  • Save status when adding cARC link under Object Links Tab

    Hi Experts,
    I want to know how to save status for cARC or SAP spec links added as Object links under the object Links tab.
    Even though I maintain the status it is not saved except for WBS elements.
    Best Regards,
    Arti.

    Do you mean that you have multiple object link types?
    I am having the same problem.
    For object link type A, I can set and save the status (severity) correctly, but for object link types B and C, it does not work. The status can be set, and it is shown on the UI, but it is not saved correctly, so that the status is gone when I reload the project.
    Maybe somebody can help here?

  • Object Link Concept in SAP PM

    Hi,
        I know about Object Links. I need some clarification on that. As per SAP help, link from & link to will not consider the from equipment & to equipment throu which medium will pass. Then how the system will know the hierarchy.
    I am looking forward a reply.
    Regards,
    Maheswaran.

    Andrew,
       Thanks for your reply. I am not having this scenario in my project. I am throwing some general example. Actually my question is that, in the object link there is called link from & link to where we can select different equipments to link together.
           For example, cutting machine & drilling machine are going to be linked throu object link. In the physical assembly, first cutting will be done & then we will go drilling for any of the products in the particular process. In this case, I am giving link from as drilling machine & link to as cutting m/c, it will accept.
          As the system, it doesnt know the flow of the process. But there should be some provision to show the actual flow of the machines.
    Then how we can give the actual equipment flow.
    I think I have a clarity. Please ask me if you want more information.
    Thanks,
    Maheswaran.

  • Add ESSR Object in a DMS Object Link

    Hi everybody,
    i am trying to create an object link to Service Entry Sheet. (tcode: ML81N, ESSR-LBLNI)
    by sap instructions i did this step:
    "You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130."
    and this step:
    Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
    I have done above step .
    I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
    I created Function Module OBJECT_CHECK_ESSR.
    After this What I have to do for displaying ESSR object in DMS as Object Link.
    Please Guide me as soon as possible.
    Thanks
    Pranesh

    Hey Pranesh
    Go to IMG -> Cross-Application Components -> Document Management ->  Control Data -> Maintain Screen for Object Link
    Add the SAP objec and Screen
    Go to IMG -> Cross-Application Components -> Document Management ->  Control Data -> Define Document Types
    Choose the document type you want to add the object link
    Define object link
    and add object and screen number
    BR/Håkan

  • RE-FX Object link is not working

    Hi Gurus
    I have added the object VICNCN (Screen Number: 500) in DC10 for a document type. Now i can link Real Estate Contract with a DIR in Object Link tab. When i double click the Real Estate Contract number in Object Link tab then the system will open the transaction RECN. So i hope the DIR is attached to that number.
    But when go to transaction RECN and select the menu Extras--> Document Management then the system prompts a message to create a New Record.  Suppose if click "Yes" then it shows a error "Model Not Found". Actually the Real Contract Number has already been linked in Object Link Tab in CV01N. But it is not working properly.
    Can anyone please help me to fix this issue.
    Regards
    Vasim Raja. R

    HI Nayeem,
    Please maintain Authorization group 1 in Maintain screen for Object Link :
    Maintain 1 in Auth. field. Then go to RECN, Extras, Document Management there u will find Creation of document from RECN.
    Regards
    Jayanth

  • Object link after Document release

    Dear all
    Can we restrict user to link the DIR before it is released?
    I mean user should not be able to link document to any of the sap object until it is having released status.
    Regards
    Sandeep

    I think the above method can be used to restrict user to create object link.
    i would like to know weather it is possible to configure such that
    user must at least enter one object link.if object link is not entered the system should not, allow the user to save DIR.

  • Mass deletion of Object link of IN05 transaction

    Hi Guys,
    We have a possibility to mark an object link for deletion via transaction IN05. Do we have any possibility to do the same in mass and not object link by object link??
    Please help me, if any one have idea of this.

    I dont think there is any standard transaction to do this in mass.You may have to develop some custom program to accomplsih this.
    Thanks
    Narasimhan

  • Object ID for landed cost

    Hi Experts
    Can any one tell me, what is the object id for landed cost?
    thanx in advance
    Regards
    Kamlesh

    It is 69.
    Check this SAP Note that gives more information about object codes in B1
    SAP Note: 902807     Transaction Codes in SAP B1     
    [https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=902807]

  • Calling an SAP Transaction in cProjects Object Links

    Hi all,
    Can anyone help with the steps to be done in order to call an SAP Transaction in cProjects via services to Object Links. We succeeded to get the object links from R/3, but we are not able yet to see the 'open' link under 'Application' in the Object Link Tab. I read some documentation, it seems that an ITS server is required... Has anyone succeeded to do the right setting?
    Thank you,
    Lacramioara

    Hi Lacramioara,
    You have to enter the ITS Web server name in the Web Server field (IMG activity “Make Settings for Calling an SAP Transaction"). The server is required if you want to call a Web application for processing a linked object.
    Regards
    Deepak

  • How to create Object Links For non standard SAP Objects?

    Hi all,
             I need to create an object link in cvo1n for a non standard SAP object (inspection characteristics) . we have two ways to do this
    1. Create a screen for the rquirement by taking the standard screens as reference.
    2. Implement badi document_obj.
    I need a step by step process to perform both the steps. Sample codes will be helpful.
    One more thing is that i need a link in the standard screens of inspection characteristics also. How to get a two way link both in cv01n and in the standard inspection char screen.

    hi
    Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
    Process
    Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    also you can attach the document to PRT also. but it will not show you in dms. This type of attachment is only from otherside.
    thanks
    nitin
    award point if useful

  • Object link navigation for opening a document using the document id

    Hi All,
    I am facing a problem with setting up the object link for the transaction id field. My requirement is when i click on the order id, it should open up the particular order.
    For example this kind of scenario is done in application CRMD_BUS2000120. here in the result list we get the list of transaction ids and on click of the id it opens the particular order. Can anyone tell me how to implement the same.
    Thanks & Regards,
    Anuradha

    Hi,
    In the result list to open the property they wud ve used is Internal Link. For the order to open from some other link you have to mention your link details.
    Say, for opening any account form some other screen you have to give the details as follows in the propetied of the particular field,
    object Type : AccountCRM
    Method : Application
    Field -> Object Key : NAV_OBJECT_KEY.
    Hope it helps.
    Regards,
    Purush.

  • Open as linked smart object

    Hello,
    iam looking for a solution to open files in a folder
    and copy then into a document.
    Its working good, but i need the files to be linked smart object.
    Anyone knows a solution ?
    Here my Code so far:
    See in line 33. Convert to smart object: ?
    var file = new File('C:/User_MY PATH.PSD'),
    docRef = open(file);
    // Use the path to the application and append the samples folder
    var samplesFolder = Folder('C:/USERS_MY FOLDER');
    //Get all the files in the folder
    var fileList = samplesFolder.getFiles()
      // open each file
      for (var i = 0; i < fileList.length; i++)
      // The fileList is folders and files so open only files
      if (fileList[i]instanceof File)
      open(fileList[i])
      // use the document name for the layer name in the merged document
      var activeDocName = app.activeDocument.name;
      var targetDocName = activeDocName.substring(0, activeDocName.lastIndexOf("."));
      // Copy the Document
      app.activeDocument.selection.selectAll()
      //convertToSmartObject(); THIS ISNT WORKING - CONVERT IT ?
      app.activeDocument.selection.copy()
      // don’t save anything we did
      app.activeDocument.close(SaveOptions.DONOTSAVECHANGES)
      //Select specific layer to paste the copy, this is to make sure the layers are in a specific position
      var doc = app.activeDocument;
      doc.activeLayer = doc.artLayers.getByName("bgr");
      //Paste Document
      app.activeDocument.paste()
      app.activeDocument.activeLayer.name = targetDocName

    Use scriptlistener:
    var idPlc = charIDToTypeID( "Plc " );
        var desc2 = new ActionDescriptor();
        var idnull = charIDToTypeID( "null" );
        desc2.putPath( idnull, new File( "C:\\Photos\\myPhoto.psd" ) );
        var idLnkd = charIDToTypeID( "Lnkd" );
        desc2.putBoolean( idLnkd, true );
        var idFTcs = charIDToTypeID( "FTcs" );
        var idQCSt = charIDToTypeID( "QCSt" );
        var idQcsa = charIDToTypeID( "Qcsa" );
        desc2.putEnumerated( idFTcs, idQCSt, idQcsa );
        var idOfst = charIDToTypeID( "Ofst" );
            var desc3 = new ActionDescriptor();
            var idHrzn = charIDToTypeID( "Hrzn" );
            var idPxl = charIDToTypeID( "#Pxl" );
            desc3.putUnitDouble( idHrzn, idPxl, 0.000000 );
            var idVrtc = charIDToTypeID( "Vrtc" );
            var idPxl = charIDToTypeID( "#Pxl" );
            desc3.putUnitDouble( idVrtc, idPxl, 0.000000 );
        var idOfst = charIDToTypeID( "Ofst" );
        desc2.putObject( idOfst, idOfst, desc3 );
    executeAction( idPlc, desc2, DialogModes.NO );

  • Opening a new window when clicking on object links

    Hi,
      I have installed business package for crm and configured the object links, but when i click on object links, it is opening a new window, but i want it to be opened in the same window form which that link was activated.
    could you please help me in this regard
    Thank you

    Hello Koduru,
    you should have a look at the work protect modus settings of the user.
    Regards
    Gregor

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

Maybe you are looking for