Open nat type for xbox 360 with wrt160n?

How can I open my nat type on the xbox 360 with my wrt160n?
Currently it is on moderate..........

I had this same problem, I had to enable three things. enable UPnP, enable Allow users to make congiguration changes, enable Allow users to disable internet access. You most likely have the first two I mentioned enabled but the last one is the one I didn't have enabled and once I enabled then I had open NAT

Similar Messages

  • Amazon Q&A - E3200 - Default Nat Type for xbox 360 and ps3

    Date: Sep 5, 2012 4:08:21 PM PDT
    Linksys E3200 High-Performance Simultaneous Dual-Band Wireless-N Router
    the nat type for xbox 360 and ps3, what is it when you set the router up out of the box? are the nat types open moderate or strict

    Hi there. It actually depends if the gaming consoles ports are not blocked by your ISP. Moderate NAT type limits your connection playing online games, Strict does not allow you any connection at all while Open allows you to play with everyone online. Have you had a router before with Open NAT on the gaming consoles? Try to check without the router by going directly to the modem and see if your NAT type is open or strict or moderate. If ever modem is fine and it is the router not working right you can port forward ports on the router. I found these usual ports online, for XBOX live:TCP and UDP ports:  80-88, 3074-3074, 4267-4269. For PS380, 443, 3478, 3479, 3480, 5223, 8080 and UDP: 3478, 3479.
    Setting up port range forwarding on Linksys wireless-N routers and gateways
    Resolving NAT type issues with gaming consoles through a Linksys router
    PS3
    Setting up an Xbox 360® behind a Linksys Wireless-N router

  • E3200 Opening NAT settings for Xbox 360/Live help

    Hello everyone, I have just purchased a E3200 today and my nat type is strict on Xbox live, that's what it says when I'm in the lobby in Modern Warfare 3. How do I get a Open NAT type? Any help please? THANKS!

    This is a volunteer forum, not a 24/7 hotline. Who's your ISP and what is the model number of your internet modem?
    I don't work for Cisco. I'm just here to help.

  • Opening NAT settings for Xbox

    So recently I tried opening NAT settings so I could use my Xbox Live more efficiently. Unfortunately, I know nothing about computer networking. Is there anything I can do to get this up and working?

    Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
    The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
    Option 1 - Create a DMZ
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
    Enable default host at: <Enter the IP Address for the XBox>
    Option 2 - Configure Port Mapping
    The following ports must be available for Xbox Live to operate correctly:
    UDP 88
    UDP 3074
    TCP 3074
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the Xbox 360.
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
    Click the "+" (Add) button to enter DHCP Reservations.
    Description: <enter the desired description of the host device>
    Reserve address by: MAC Address
    Click Continue.
    MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
    IPv4 Address: <enter the desired Private IP address>
    Click Done.
    2. Setup Port Mapping on the AEBSn.
    AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
    Click the "+" (Add) button
    Service: <choose the appropriate service from the Service pop-up menu>
    Public UDP Port(s): 88, 3074
    Public TCP Port(s): 3074
    Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
    Private UDP Port(s): 88, 3074
    Private TCP Port(s): 3074
    Click "Continue"

  • Trying to change NAT connection from moderate NAT connection to an open NAT connection for XBOX LIVE

    Hi, I have a Linksys Wireless-N Broadband Router/WRT160Nv2 and I have been trying to change my NAT connection from a moderate NAT connection to a open NAT connection for my Xbox Live on my Xbox 360. I can sign into my Xbox Live account but it is working on a moderate NAT connection. I have already enabled the UPnP and put in the proper port numbers. After doing that I signed into my Xbox Live on my Xbox 360 and tested my Xbox Live connection and still it says that I a moderate NAT connection. I do not know what elso to do and I would greatly appreciate step by step help from anybody who knows what they are doing. PLEASE HELP ME AS SOON AS POSSIBLE!!!!
    Thank you

    A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time.  Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa.  It adds security to the network by keeping the private IP addresses hidden from the outside world.
    Here is the link, which will you in resolving the concern:  http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

  • Open NAT Type for three xbox 360s on E3000?

    I have three xbox 360s (mine plus my son and my daughter)...I have my settings set to where when myself and my son are on our 360s our NAT type is open...but as soon as my daughter gets on hers the whole thing goes to strict....

    Just a question though:
    Are you experiencing this when you are playing the same game in the same network with your son and daughter?  what are the settings of the other router? 
    have you tried these steps?
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=22385
    "Don't fix it if it ain't broken."

  • WRT160N V1 Open Nat on 3 Xbox 360(s) Possible for Call of Duty Modern Warfare 2?

    All connected wireless.
    Possible?  If so please assist or direct me to a router that would work.
    I'm using the Motorolla SB5101 connected to Cable at about 25 Mbps.

    So you need to Open NAT on all your 3 XBOX's. Well i don't think its possible, never tried to make the NAT open on 3 XBOX. Yes but 2 XBOX can work with your Router and the NAT will be open on your Router.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter... Leave Username blank & in Password use admin in lower case...
    On the set-up tab change the MTU Size to 1365 and click Save Settings...
    Click on "Administration" tab and disable the option UPnP and click Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox , IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox, Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
    On you need to Assign a Static IP on your 2nd XBOX. the IP address should be 192.168.1.30, Subnet , Default Gateway, and the DNS should be the same as of your 1st XBOX. 
    On your Router page, under the Application and Gaming tab  you need to click on the Sub tab "DMZ" and you need to Enable DMZ and input the IP address of your 2nd XBOX and click on Save Settings... 
    For your 3rd XBOX you can try to Enable Port Triggering and open the same ports : 53 to 3074 and click on Save Settings... 
    Now you need to restart your all the 3 XBOX's and check if the NAT is Open.

  • WRT54GS V7 NAT TO OPEN, HOW? For xbox 360 live

    I recently got a new modem DSL modem so I had to re start my wireless Linksys router settings to factory default. I use AT&T DSL.
    I got my network all set up again and can connect to Xbox Live fine. My desktop has the DSL modem and router plugged into it. Thats in another room. Im in my room on my laptop, with my Xbox 360 next to me. I used to plug the ethernet cable from the 360 to my laptop, and I could get online fine.
    But once I connected today, it said my NAT was set to Strict.
    How can I set my NAT to open, or even Moderate. Because as of right now, I cant really join ANY games online at all. (I tried with Call of Duty Modern Warfare 2)
    Thanks 

    As you have DSL modem,you need to convert the modem into the bridge mode to make your X-Box working.

  • Linksys e2000 router Open NAT troubleshooting multiple xbox 360's

    Hello,
    I've been searching for about 4 hours now how to fix my NAT problems. I thought it had it working on one xbox in my bedroom, as it said OPEN NAT. But, when I looked at my Xbox in the living room, it said MODERATE NAT. How can I get these both to say OPEN NAT? Any help is appreciated. Thank you!

    If you're attempting to game with multiple 360s, port triggering would be your best option.
    You might succeed in getting open NAT on both but the issue would be if you'd be able to play the same game on both consoles simultaenously. Since both consoles will use the same Internet port, the game packets will only be sent to one local IP address. Some games support this and some don't so if you're unable to get open NAT on both game consoles, call your ISP and request for another IP address. That should solve everything.

  • Open NAT to New Xbox 360

    I just replaced a brand new Xbox 360 arcade with an Xbox 360 Elite.
    When the Arcade Console was hooked up it showed the NAT on my WRT54GS version 1.51.0 router as "OPEN".
    After I replaced it with the Elite console it shows the NAT on my WRT54GS version 1.51.0 router as "Moderate".
    To host games it needs to be open.
    So can anyone help me get it to "OPEN"?

    Do you have the ports forwarded for your XBOX on router?

  • Cant get open nat type for PS3, it use to be but wont go back

    im on Fios with the verizon router. I had the DMZ set to an ip with the PS3 also on it. the nat type was open and all was ok. I dont know how long its been this way (guessing not long because I have sucked at COD this week!) but I noticed im not at moderate. I checked the DMZ and the ip was still there. looked at PS3 and it was empty for some reason, so I put the ip back. ive restarted and tried other IPs andit will not go back to open. ive looked at youtube tutorials to be sure that im not missing anything but the vids seem tobe older because I have more options on the router settings than what the vids show, guess I have newer firmware. Any suggestions?

    actually, Open is what you want. you have a lot better preformance online when dealing with fast paced games like COD. you will really notice a difference. generally you just designate an IP in the DMZ settings of the router, then tell the PS3 to only use that IP, and thats it. just seems now on my end thats no longer the case and cant get it to go 

  • Turtle Beach DX11s for Xbox 360 with warranty?

    I bought the headset last October with a full year's warranty but I haven't been using it recently partially because I lost the audio processor that came with the headset. I was wondering, would warranty be able to cover this and replace my processor? The headset seems to work fine with my computer but it won't work on my xbox without the missing component. 

    No it would not.
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • Should I get a new router to get open NAT type?

    Whenever I play COD Black ops 2 on my xbox 360 my NAT type is strict. I have a centurylink 660 series modem and that is working to its full potential of the bundle we bought from them. I also have an airport extreme (2009). I Know theres all these port forwarding stuff, but whenever I try to do that, my whole network crashes and I have to factory default all of my stuff. So would getting a new router help me? also, I have my airport extreme in bridge mode because It said I have a double NAT and DCHP. So what would be the best solution for getting an open NAT type for Call of Duty on Xbox 360? I also have a MacBook pro (2009).

    Yes, that is what I am doing.  I don't know the setup details for what you want to do, but I am running a MacBook Pro (late 2008), iPad, and a couple of iPhones on wifi through my Airport Extreme base station.  I also run backups to a Time Capsule. 
    The base station is set up to "Create a wireless network" and runs in "DHCP and NAT" mode.  The Time Capsule and two Airport Expresses are set up to "Join a wireless network".  My cable modem (Ubee DVW3201b) runs in bridge mode, connected by cable to the WAN port on the base station.  I have the wifi capability of the modem disabled.  It took me some trial and error to get the cable modem set up properly, but there is a lot of information out on the net. 

  • Open NAT type on PS3 from moderate?

    Hey,
    Ive been wanting to get an open NAT type for a while, ive been unable to would anyone be able to help me?,
    i have a BT Infinity Hub 3, im currently on Moderate NAT type
    Many Thanks,
                         Sean

    Hi Matt,
    Welcome to the forum and thanks for posting. Take a look here for some information on port forwarding. I've also found this whcih you might find useful. Let me know if it helps.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Need help opening NAT type to OPEN on a model WRT54GS router for xbox 360

    I have tried from other people's advice and when i test Xbox Live i always get a Moderate NAT type. I am becoming frustrated with how it is not working and I am hoping someone can help me. Please leave advice/suggestions and thank you for your time.

    Open the setup page of the router using 192.168.1.1 by putting the password as admin with username as blank & click the Administration tab & on the same page you will see UPNP.You need to select it as disable in order to help opening NAT type to OPEN.

Maybe you are looking for

  • Lost all my music after iOS 8 update

    Anyone else had this issue? I did the update yesterday with 4.6GB of free space and today I have 44.5GB of free space... everything else looks fine, but all my music is gone. All I see when I go in the Music app is the stuff I purchased on iTunes ove

  • How to debug a program which is running in background (Job)

    Hi, I have a program which can be run only in background. I have to debug that program. Could you please let me know, how can I do that? Thanks, Sandeep

  • How to create a new role : Need to send notifications to multiple users.

    Hi All, I have a requirement where in I need to send notifications to multiple users and no. of users in the list is not fixed.i.e. this builds up dynamically. Kindly let me know how do I achieve this. Also wanted to know where form the Workflow role

  • Report unrecoverable

    After taking full database backup I issued RMAN> report unrecoverable; Report of files that need backup due to unrecoverable operations File Type of Backup Required Name 5 full or incremental /u06/oradata/WRHS/data01.dbf 7 full or incremental /u06/or

  • Why is the MP3 that is purchased from Amazon different when it is imported?

    I purchased several MP3's from Amazon. They are automatically imported into iTunes by the Amazon MP3 Downloader. However I noticed that though the file sizes are the same the MP3's that are saved in the iTunes Media folder are different. Does anyone