"open new windows in a new tab instead" does not seem to work properly. Why?
Just installed FF4. Expected differences, worked around them. BUT. I started using the web as I normally do, and sites are popping up new windows - FF4 should be converting those to new tabs; the option is checked in preferences. However, FF4 is NOT doing that.
Thanks for the responses and sorry for taking a while to get back. I have been looking around but not sure where is the "about: config page." When I click on Firefox "about" there is nothing to configure. What do I click on? TIA
Similar Messages
-
With Windows 7 I upgraded itunes to 11. Now in my itunes library, when I click on a song "original file could not be found" comes up. This happens with over 2000 songs, but it seems to be ones I recorded from cd's. Locate does not seem to work. Has anyone else had this problem?
Highlight a song that is supposedly missing, press CTRL+I to Get Info, say no when asked to locate the file, then look at the summary tab. Where does iTunes "think" the file should be? Where is it really? You may need to give a configuration file a minor tweak.
tt2 -
My mac is becoming too slow. It takes long to open word documents, pdf files or excel documents or even safari. Can anybody suggest something? I have tried to reduce the number of open applications, but does not seem to work.
Hi ...
Checked to see how much free space there is on the startup disk lately?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac GuidesFreeing Up Hard Disk Space - Mac Guides
If disk space is not the issue, booting in Safe Mode deletes system caches that may help.
A Safe Mode boot takes longer then a normal boot so be patient.
Once you see the Desktop, click the Apple menu icon top left corner of the screen.
From the drop down menu click Restart.
See if that makes a difference ... -
I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.
If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
HELP- New VI function does not seem to work in Built Application
My Application is designed to coordinate several (16) separate test stations from one control. The test stations can run independently. I have a Test Manager application that launches independently running Test Runner VIs when the user has selected a test to run and the conditions to run it with. There can be 0 to 16 Test Runner VIs running at any given time. Each Test Runner VI uses the same template Test Runner.VI code but is given a unique Name based on a randomly generated GUID. I use a sequence of the New VI function, VI.FP.Open and VI.Run VI to create the VI based upon the template, give it a unique name and then launch it to run independently. See JPG fragment attached.
This design works perfectly well when used in the LabView 2010 development environment. But it does not work when I build the Test Manager as an EXE application. There are no errors generated, but the new VI is not launched and I think that one of the functions in the sequence never returns. I am not sure if the New VI is created or not.
Does anyone know how to modify this so that New VIs can be created, uniquely named and launched, that will work properly no matter whether the creating VI is running in either development (for debugging) or as a built application?
Does the sequence New VI function, VI.FP.Open and VI.Run VI work when used in a Built application? Is there some other method that will work to serve this need?
Is there a function in LabView that will launch an exe file like WinExec does? Perhaps I can use that.
THANKS MUCH for any advice.
Solved!
Go to Solution.
Attachments:
New VI launch.jpg 38 KBAre you using any paths in your VI?
I do see the Application Directory in the image you posted. Do you have other paths?
Do you use the same computer that you developed with to run the executable?
You can create indicators for the paths and confirm that they are okay. Do you automatically close the front panel when closing the application?
If so, you can disable that portion of the code, re-build the code and look at the paths and any error message.
dbaechtel wrote:
My Application is designed to coordinate several (16) separate test stations from one control. The test stations can run independently. I have a Test Manager application that launches independently running Test Runner VIs when the user has selected a test to run and the conditions to run it with. There can be 0 to 16 Test Runner VIs running at any given time. Each Test Runner VI uses the same template Test Runner.VI code but is given a unique Name based on a randomly generated GUID. I use a sequence of the New VI function, VI.FP.Open and VI.Run VI to create the VI based upon the template, give it a unique name and then launch it to run independently. See JPG fragment attached.
This design works perfectly well when used in the LabView 2010 development environment. But it does not work when I build the Test Manager as an EXE application. There are no errors generated, but the new VI is not launched and I think that one of the functions in the sequence never returns. I am not sure if the New VI is created or not.
Does anyone know how to modify this so that New VIs can be created, uniquely named and launched, that will work properly no matter whether the creating VI is running in either development (for debugging) or as a built application? You can query if it is running as an application or as development.
Does the sequence New VI function, VI.FP.Open and VI.Run VI work when used in a Built application? Is there some other method that will work to serve this need? Yes they should
Is there a function in LabView that will launch an exe file like WinExec does? Perhaps I can use that. Building an executable should be fine. It's most likely something silly and you'll end up saying D'Oh! -
i would like the option ´open new window in new tab instead´ working properly so no new windows will be opened except when I command them to..
as said, many websites have popups (most are blocked, still some come through) who open in a new window.Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''' type '''browser.link.open_newwindow'''
* Right click the preference '''browser.link.open_newwindow''' and click '''Modify'''
* change the value to '''3'''
* click OK
-> In the '''Filter bar''' type '''browser.link.open_newwindow.restriction'''
* Right click the preference '''browser.link.open_newwindow.restriction''' and click '''Modify'''
* change the value to '''0''' (zero)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
Check and tell if its working. -
I have gone to Safari preferences and have made the selection in TABS to open links in TABS instead of Windows. I have chosen "Always".
The setting has not stuck. I tried logging out then logging back in however it still does not work. Am I missing something?I did not have any extensions and reset Safari. I have the most update versions as per screenshot
I downloaded youe app and below are the results;
Hardware Information:
iMac (27-inch, Mid 2010)
iMac - model: iMac11,3
1 3.2 GHz Intel Core i3 CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 5670 - VRAM: 512 MB
System Software:
OS X 10.8.4 (12E55) - Uptime: 0 days 1:23:37
Disk Information:
ST31000528AS disk0 : (1 TB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 993.77 GB (937.7 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 5.57 GB (5.56 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.sophos.kext.sav (8.0.4)
com.trusteer.driver.gakl_driver_2 (1)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.sophos.autoupdate.plist
[loaded] com.sophos.intercheck.plist
[loaded] com.sophos.notification.plist
[loaded] com.trusteer.rooks.rooksd.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.hp.devicemonitor.plist
[loaded] com.hp.messagecenter.launcher.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] com.sophos.uiserver.plist
[loaded] com.trusteer.rapport.rapportd.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
User Login Items:
Cobook
Officejet Pro 8500 A910 [2DB56A]
Mail
Dropbox
AdobeResourceSynchronizer
TomTomHOMERunner
BlackBerry Device Manager
3rd Party Preference Panes:
Flash Player
Flip4Mac WMV
Rapport
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Unity Web Player.plugin
Bad Fonts:
None
Top Processes by CPU:
2% WindowServer
2% WebProcess
2% EtreCheck
0% Safari
0% InterCheck
0% mds
0% fontd
0% Microsoft Excel
0% rapportd
0% BBLaunchAgent
Top Processes by Memory:
242 MB WebProcess
152 MB InterCheck
143 MB Finder
131 MB Safari
127 MB Microsoft Excel
106 MB Mail
94 MB WindowServer
70 MB mds
66 MB Dropbox
49 MB Dock
Virtual Memory Statistics
79 MB Free RAM
1.71 GB Active RAM
1.76 GB Inactive RAM
461 MB Wired RAM
289 MB Page-ins
0 B Page-outs -
Officejet 4622, new printer today. black does not seem to work at all but all the colors do.
I print a test page through diagnostic tool and black square is blank. I cannot tell if the alignment prints properly as I have no example of what it should look like to ensure it is correct since the alignment fails to detect the alignment page. Scans work fine. I tried cleaning the print heads and still don't seem to get black to work correctly. This is a new printer purchased today 9.30.2012.
just in case anyone else encounters this problem, heres whats really going on and heres how to fix this annoying issue. its relatively easy to do and more efficient than wasting money on a new printer or having it repaired like most people end up doing.
whats going on? the ink has clogged the printing heads and has solidified shut. the "clean print heads" feature the printer came with does not have the ability to fix this. that feature is to clean up dirty heads, not clogged heads. why hp decided to make this model without a simple to remove cradle is beyond me, but fortunately the cradle DOES come out and can be cleaned with hot water.
theres a few items you will need to make this happen the easy way or you could just break out the tree limb loppers, like i did, and vent your frustrations.
what you will need: a pair of needle nosed pliers, a T9 torx screwdriver head ( auto parts stores sell them for a couple bucks), some paper towels and an area to work (its easiest to do this in a corner of a room, on a small table or the floor). keep in mind you are dealing with ink, so change out of your good clothes just in case and also grab a paper plate or a few sheets of printing paper to set the ink cartridges on as you work.
1) ok. lets get started. !!!FIRST UNPLUG THE PRINTER RIGHT NOW, SO YOU DONT ACCIDENTALLY DIE BY ELECTROCUTION!!! i forgot and when i began unscrewing the first 6 screws, the chime kept going off and im like **bleep**? i was impressed by the safety measures hp took while engineering this model.
2) the printer is now unplugged and then go to your corner work area and place the printer so there is a wall or barrier on its left and also a wall or barrier behind it. do this while facing it as if you were about to use it.
3) now, what you have to do is open the printer like you are going to change the ink and on the right side there is a plastic guide that prevents the top from opening all the way. look on the side and you will notice it could pop off with your fingers. pop it off and open it all the way open so you could get at the screws the lid would have prevented you from accessing.
4) lean the scanner portion and top portion against the back wall.
5) all screws you will be removing are size T9H torx screws. there are ten total. there are 2 black screws in the front top and then 4 black screws in the back top. remove them and put them on your paper plate.
6) next is 1 short silver colored screw located under the control panel, use your finger and feel around beneath the * button. unscrew it, put it on the paper plate.
7) next you are going to remove the face/control panel to get at the last 3 screws so locate the little illustrations on the top of the printer, there are 2 on the bottom left and 5 on the bottom right (1 and 2 on the left explain paper jam removals and then 1-5 on the right explain changing ink cartridges). then about half an inch south of the number 5 illustration, on the lip, is a plastic bracket. six inches to the left is another one then 6 more inches to the left, under the illustration number 2 (paper jam removal) is a third bracket. undo them using your fingernails. and just flip it up like car hood and then lay it down on the main top portion of the printer, minding the flat wire which is connected into the circuit board of the control panel (if the flat wire popped out because you got too rowdy on it, then simply insert it back in when you reassemble).
8) next, unscrew the 3 longer silver screws which are located under the panel you just popped off. there is 1 on the left and 2 on the rightish side. toss em on the paper plate.
9) now that all the screws are removed, take the face panel and partially pop it back together.
10) then take the whole top ( the part with the little illustrations and lift it like a car hood, ONLY THIS TIME OPEN IT TO THE LEFT and balance it on the edge of the printer, leaning it towards the wall or barrier on your left. BE CAREFUL NOT TO YANK ON THE FRUIT STRIPE COLORED WIRES ON THE LEFT AND ALSO THE BLACK FLAT WIRE THAT CONNECTS THE SCANNING PORTION TO THE MAIN PORTION OF THE PRINTER.
11) next grab the needle nose pliers and remove the 2 silver colored tension springs located behind the printer cartridges. pay attention where they were attached so you remember where they go during assembly. take a pic with your phone if you have to or simply re-figure it out like i did. toss em on the paper plate.
12) then disconnect the 2 large flat wires and 1 small flatwire attached to the back of the ink carriage. take a picture or remember like i did. i imagine bad things may occur if you reverse them on re-assembly. grab the phone and take a quik pic to be sure.
13) now remove the ink carriage, cartridges and all, by lifting the front first. be careful of the little transparent ribbon in there that moves the carriage left to right and vice versa. you dont want to damage that little guy. now take the carriage to your paper plate. dont drip any ink or accidentally get it on your fingers without knowing or you will make a mess.
14) remove the ink cartridges and set them on the paper plate, ink side up to avoid a mess, these things sometimes drip. set the plate off to the side. its time to clean the print heads.
15) then go to the sink, with the empty ink carriage and turn the water on hot and then just let the empty ink carriage sit there with the water mainly going through the screen of the clogged color (inspect and make sure there isnt a little rubber gasket surrounding the little screen if there is dont lose it. i didnt look too closely and i dont think hp has them but i know some other printers do). it wont stain the sink but wash down any ink as it comes out to be sure. also notice there is a small circuit board attached to it. dont bang it up but getting it wet doesnt matter.
16) keep doing this until the water runs clear.
17) then use your finger and rub the screen gently with your finger and then rinse it, washing away the ink until the water runs clear. continue this until there is no more ink and the screens are clean. do it to all the colors just for good measures. the problem color that wouldnt print, you will notice takes longer to clean than the other colors.
18) now look on the bottom side of the carriage. those wierd looking things are the heads. rinse them with hot water and wipe them with paper towels. then flip it over and blast the screen side again. also in between the screenside and the heads (on the side of the carriage) is an opening that is also probably gunked up. blast it with water too. then flip it over and wipe the heads again. repeat this step until nothing wipes away or until you are sick and tired.
19) shake off then use paper towels to dry the entire unit. make sure the unit is dry. especially inside the female plugs. blow in it or break out the hair dryer and gently dry it. dont sit there and melt it though with the blow dryer. but the sooner it dries the less likely your ink cartridges sitting on the paper plate will dry out. the ink wont dry out fast just dont take a nap or go out on a date until you are reassembled with the ink portion.
20) now you have completed the cleaning of the heads and probably wont need to do this again for the length of time it was since you bought the printer. and just like a roadtrip you used a map to navigate, you will use these instructions in reverse for re-assembly. but keep in mind when re-inserting the 3 flatwires you disconnected from the back of the ink carriage, make sure you have the little metal contact points on the flatwires (male side) inserted so they touch the little metal contact points on the carriage plugs (female side). ALSO BE EXTRA CAREFUL NOT TO DAMAGE THE BLACK FLATWIRE CONNECTING THE SCANNER PORTION TO THE MAIN PRINTER PORTION. THERE IS A LITTLE GROOVE IN THE PLASTIC WHERE IT CAN BE SEATED TO GUARANTEE NO CRIMPAGE. USE IT. also make sure the 2 hinges of the scanner portion/lid are seated properly before fastening the the top with the 6 black screws.
now re-assemble the printer and reinstall the ink cartridges. and then plug in the unit, and turn it on. if you get any notifications on the control panel saying the carriage wont move, then open the hood and take out the ink cartridges, push around and make sure the carriage is seated properly and that the tensioner springs are in place properly. repeat if neccesary until notifications go away or just do a test print and disregard the notification if you messed with it already a few times. thats what happened to me and the notification went away on its own. once its online, open the hp utilities and press the "clean the heads" button. do it 2x in a row and you will be back in style, with extremely rich and bold colors and yes, raven black print.
p.s.
you can always take your aggressions out with the tree limb loppers or the tin snips like i did and snip out the center plastic that prevents you from taking the carriage directly out. this eliminates disassembly and re-assembly entirely. just make sure you DO NOT CUT THE TRANSPARENT RIBBON THAT MOVES THE CARRIAGE BACK AND FORTH. this way the next time it happens it only takes you 10 minutes before you are up and printing.
enjoy! - Porf -
this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage
The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites -
Align New objects to pixel grid does not seem to work - Windows 7
Here is another issue I've been struggling with for a while.
Scenario:
1. Working on a web UI, so want to use pixel grid, which is handy. So I create a new document, web profile and making sure 'Align New Objects to Pixel Grid' is selected:
2. Yay! We have a nice and clean new document, cannot wait to start drawing rectangles! But let's double-check if everything is hunky dory:
3. Right! Let's go and start making rectangles!
4. And NOOOOOOOO!!!! As you can see in the image above, the rectangle is not aligned to pixel grid (look at the values), and it's "Align to pixel grid" option is not selected. Let's triple-check our options:
So yeah, there you go. It's all lies! You have to check the check box AFTER you create the shapes FOR EACH SHAPE!
Illustrator why you do this?! What am I missing here?!
Windows 7 Ultimate
AI 18.1.1 (64-bit)kaanungur,
I am afraid you have come across the Live Rectangle bug sorry feature where it refuses to align to the Pixel Grid.
To get round it in each case, it is possible to Expand the Live Rectangles to get normal old fashioned rectangles, or to Pathfinder>Unite, or to use the Scale Tool or the Free Transform Tool.
A more permanent way round that is to create normal old fashioned rectangles, after running the free script created by Pawel, see this thread with download link:
https://forums.adobe.com/thread/1587587 -
I tried to register my ipad thru the Apple website but it won't let me register because I do not have the exact purchase date. This was a gift and I do not know the exact date. So frustrating because I am excited and anxious to use my new ipad!
Try making up a date. something relatively recent. See if that allows you to go forward
-
I bought my daughter a new MacbookPro 13" for grad school and selected the HP Envy 100 printer from the Apple Store website. When I just tried to install the printer, it said that that the software was not compatable with Lion. Any suggestions as to how to get it to work?
Sorry, but the response just takes you to the HP site which is of all possible assistance short of actual help!!
HP (and Apple?) need to fess up and tell all the people who have HP printers when they will "just work" with their machines and OS X Lion.... because for many of us, they just don't! It isn't rocket science guys.... blithely telling us that downloading S/W updates from Apple doesn't help.... because they don't solve the problems! -
My points above lay out the problem and I get messages telling me it can't find the files....Why is it not working when it did just fine right up until you came out with version 4???
Any suggestions? I may have to go to another browser, but I have always like your product best.You are welcome. There has never been a need to move that one before, but try it since you can always put it back.
If the same, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite -
Photoshop elements does not seem to work with Windows 8. What photoshop will work?
I just bought a computer with windows 8 and tried to install photoshop but it messes up some of my other programs. What photoshop will will work with Windows 8.
PSE11 is known to work. You can try it out free for 30 days:
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us -
I just purchased a new to me ibook g4. I have all the disks but they do not seem to work properly. When I restart holding the C key they just spit out of the drive. I wanted to reset everything back to factory and start over but no go. Most everything works anyway except my address book application. It seems to be missing. How can I download and reinstall a new address book App. Thanks, John
iBook G4/1.33 12-Inch (Mid-2005 - Op)
1.33 GHz PowerPC 7447a (G4)
Intro Date:
July 26, 2005
Disc Date:
May 16, 2006
Order No:
M9846LL/A
Model No:
A1133 (EMC N/A)
Subfamily:
iBook G4 - Mid-2005
Model ID:
PowerBook6,7
Std. RAM:
512 MB
Std. VRAM:
32 MB
Std. HD:
40 GB (4200 RPM)
Std. Optical:
8X "Combo Drive"
Complete iBook G4/1.33 12-Inch (Mid-2005 - Op) Specs
The problem with accessing the content of the disks is the CD Drive does not seem to access them. It also has a heck of a time ejecting them. Other disks seem to read. The unit came with imovie disks and I can use them. The disks look perfectly good no scratches but they just don't work, I was hoping I could just get a online copy of the address book to replace the one that seems to be missing. Or find it somewhere on my drive. Have no clue where to look though.
Maybe you are looking for
-
New Macbook Pro. wont connect to wireless network once it has had a update
hi bought a new macbook pro last week, when you first start it up it connects fine to a wireless network, but once the software update is compltete it says that there is an error trying to jion network. there is already a powerbook g4 connected to th
-
Has anyone ever run into this? I have iTunes on three machines - my home PC, my work PC, and a laptop. I use an external hard drive to hold my library and all audio files so I can listen to whatever I want any time. The last week or so, on my work PC
-
Set Status of next document in CHARM
Hi Solman experts, I would like to automatically set the status of a "next document" in CHARM. For example if i set a close state for a SDCR i would also like the attached "next documents" to also move to a close state (SDHF etc....). I know this is
-
I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tr
-
Auscompgeek: Firefox 3.6.6 works, but 3.6.7 and 3.6.8 bring up a cannot connect issue
Firefox 3.6.7 and 3.6.8 do not connect to the internet. I've been on Mozilla support, and no luck. I have tried everything that I can, it's left to the dev team to fix the problem for 3.6.9 else I just won't be able to use it ever again. 4.0b1 works