Open PIR quantity, unconverted Pld orders and open Prod/ STO orders

Dear all,
How to deal with open PIR quantity, unconverted planned orders and open production/ STO orders in the next MRP run? Do we need to delete/ reduce them manually?
Thanks and Regards,
Raghu

Hi Shiva,
Thanks for your immediate response. I have still some confusion.
Last month, I have material A with Production order quantity of 30000.
'A' has a component 'B' which is an in-house produced material. Three planned orders each of 10000 were generated for B. Of these two planned orders were converted to production orders. One is still in planned order form.
This month I am not going to use this planned order of B. I get new requirement for A. So during MRP run I get the planned orders for B also.
For the last month requirement, as I have not converted one planned order of B to prod order, there will an open quantity of A prod order in this plant and open STO quantity in another plant. Again the PIR will also be not reduced to the same extent. If I reduce the PIR manually or through some reorganization, what about the open quantity of prod order and STO
I think I can TECO the prod order of A. Is there any such thing for STO also?
Thanks and Regards,
Raghu

Similar Messages

Open sales orders and open deliveries and open billing doc to sap from legesy

Dear all
i have some open sales orders and open deliveries and open billing doc are there in the legesy system
so i want to know how to transfer the doc to sap by using lsmw plz tell me

Hi Amith,
it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
http://scn.sap.com/thread/1012472
there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
Pls practice this in your sand box or quality system before working it in the client requirement.
Hope this helps to you
Regards
Sundar

Open order and Open delivery in Credit Exposure FD32

Hello Guys,
I am now trying to include Open order and Open delivery values in Credit Exposure FD32. I have configured the following settings, but the Open order and Open delivery values still cannot show in Sales value under Credit Exposure FD32. Can anyone here advise me what i missed?
1) In OVA8 --> 01 Credit Group for Sales Order, I have selected Static Checks and includes Open Orders and Open deliveries.
2) In V/08 --> Pricing Procedure --> Control , I also put "A" in PR00 Sub Total field.
3) In OB45 --> Credit Control Area, I put Update = 000012.
4) In OMO1 --> S066 , Period Split = Day and Updating = "Synchronous update (1)".
Thank you,
Benny

Hello Mrunal and GSL,
Thanks for your paticipation. I found my configurations are correct. I just haven't trigger the update program to update the S066 (Sales value in FD32). To trigger the update program I need to try to create delivery. If I just create a Sales Order and press Save, the PR00 value will not go to S066.
Hope that can help someone else .
Benny

Archiving open maintenance order and open PR

Dear sir,
what are steps to archiving open maintenance order and open PR .pls help
Regards,
P.Jeevanantham

Not possible to archive REL status orders. Order should have CLSD status.
There is no relation between closing the order & period lock. What is the error you are getting while closing the order?? Post that error.
Hope, confirmations or goods movements might have been done for those PM orders. As settlement have not been done, Closing of order might have given the error.
If so, open FICO periods as per the order periods & do the settlement. Then close the order. Then try archival.
Note: As much as information you give, as fast as you will get proper responses. Keep more information in your thread always.

When I click on a web page link, it creates a bookmark does not open page, need to right click and open new page or tab

When I click on a web page link, it creates a bookmark does not open page, need to right click and open new page or tab

My own problem not a system one

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full scree

I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen

I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11.

My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe

My device some times untel i update to ios7 when i open the device donot open untile i close all device and open agein and when i make call i recive massege and the device donot close by itselfe

LadySarah
You cannot upgrade from v6 to v7 without purchasing iLife 08.
Can you give more details about your crashing issue. Make of camera etc.,
You can start with the troubleshooting basics:
1. Repair Permissions using Disk Utility
2. Delete the com.apple.iPhoto.plist file from the home / library / preferences folder. You'll need to reset your User options afterwards.
3. Create a new account (systempreferences -> accounts), create an iPhoto library there and see if the problem is repeated. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD
Regards
TD

Display artists in alphabetical order and albums in chronological order.

I have my iTunes library set to display artists in alphabetical order and albums in chronological order. This is the sorting option preferred by every person I've ever spoken to about it. The touble is nobody I've ever spoken to can tell me how to get my device (4S64, 5.1.1) to follow suit. iTunes on my phone insists on listing albums alphabetically. Since I (we) already know all the letters of the alphabet and in which order they occur this kind of sorting is of no benefit. Somebody please put me (us) out of our misery and reveal whichever secret soft switch must be flipped to make this happen. Also, if possible, I would rather do the alphabetical "Artist" sorting by last name rather than first but I have not seen an option for that either.
Thank you in advance.

There is no secret soft switch for Album by Artist by Year on iOS.
If you want your artists sorted by last name first then edit the corresponding sort values.
tt2

Difference between snp planned order and pp/ds planned order

Hi to all,
can any one please explain the difference between snp planned order and pp/ds planned order. I am relatively new to this area

The primary differences are as below.
1. The master data for SNP Planned Order is SNP PPM/PDS where the minimum duration for an operation is a day. So it is used for rough cut capacity planning.
The master data for PPDS Planned Order is a PPDS PPM/PDS where operations are down to minute and second level. Moreover sequence dependent operation planning is possible in PPDS Planned Orders. It is for detailed capacity planning.
2. SNP Planned Orders are created in SNP while PPDS Planned Orders are created in PPDS or when transferred from ERP to APO.
3. SNP Planned Order need to be converted to a PPDS Planned Order before it can be used in the Execution System (ERP) for further processing - like conversion to Production Order. Moreover the category types of the orders are different in APO (EE for SNP and AI for PPDS).
Hope this helps.
Somnath

How to find open orders and open quantity

Hi abap gurus,
i want to find the open orders with the quantity means those orders for which we don't have goods issues(and partial deliverys is also possible). i get this scenario but i don't know how to start.
i think i should go to VBUP table and get all the orders
which have overall status GBSTA = 'A' OR 'B'.
So from this i will get all the open orders but i need to find open quantity also .
please tell me how can i find out and which table do i need to use.

You need to check between delivery line item table as well sales order line item table.
Sales order Line item table : VBAP
Delivery line item table : LIPS
if order qty and delivery qty are same then there is no open qty if not then there is open qty.
Thanks
Seshu

Open Purchase Orders and Open Sales Orders

Hi,
Please let me know the table names for open purchase orders and sales orders.
Regards,
Prii

HI Priti,
EKPO-ELIKZ "Delivery completed" indicator, This tell if the given PO line items has any open quantity or not.
Logic to find out if a given PO has Open Quantity or not is do the following:
    " select the PO Qunatity.
    SELECT SINGLE MENGE FROM EKPO INTO PO_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP.
    " select the GR qunatity which has been received.
    SELECT SUM( MENGE ) FROM EKBE INTO GR_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP AND
    BWART = '101'.
    " select GR Quantity which has been reversed.
    SELECT SUM( MENGE ) FROM EKBE INTO GR_REV_QTY WHERE
    EBELN = ITAB_PO_LN-EBELN AND
    EBELP = ITAB_PO_LN-EBELP AND
    BWART = '102'.
    POSTED_QTY =   GR_QTY - GR_REV_QTY .
    OPEN_QTY = PO_QTY - POSTED_QTY.
Regards,
-Venkat.

Getting the open sales orders and open deliveries valies

Hi SDNs,
I have a requirement that i need to get the all sales orders open values and delivery values. I need to build a logic for this scenario. could you please provide the logic for getting the open sales order values for respective customer.
Please provide logic instead of standard reports. That would be very useful
Thanks in advance
Regards,
K

Please provide logic instead of standard reports.
Really surprising !!!!!!!!!
But still I would like you to have a look at VA05 where both open quantity and open order value will flow. If you still feel to get the related tables, you can consider VBBE where you can get open order quantity
thanks
G. Lakshmipathi

Report with open Purchase orders and open Goods Receipt (without invoices)

Dear All,
We require a report in purchasing which will show:
1. open purchase orders
2. open goods receipts
We do not want POs and GRs that have been created into invoices to be included in the report.
At the moment we tried ME2N with RECHNUNG in selection parameters but it includes invoices. We have tried other selection parameters and reports but the results are not helpful.
I have also checked SDN but there is no correct answer. Most of them specify the ME2N with RECHNUNG as a solution but this does not work for us.
Any help would be appreciated.
G.

Hi,
Try ME2N, Select WE101....Also Select ALV
go to next screen....Go to change layout
Select to be deliverd(Qty) and Value, also to be invoice(Qty) & Value.
Hope Help U!
Regards,
Pardeep Malik

Calculation of open orders and shipped not billed orders amount

Hi All,
I have a requirement to arrive at the values of Open Order and Shipped not billed .
This is an interface program and the output will be sent to a target server.
Input : Company code, Customer Code , Document date.
Output Fields are:
Customer Code
Sum of all open orders value
Sum of all shipped not billed orders value
To give an example
A Customer has 50 orders and the number of line items are 200 .
Overall order amount for 200 line items is 10,000.
70 line items have been delivered (amounting to 5,000) and
30 line items among the 70 delivered have been invoiced. (amounting to 3,000).
I need to know the best way to get to:
(1) Total "Open order" amount for the customer which is 5,000 in this example.
(2) Total "Shipped not billed" amount for the customer which is 2,000 in this example.
(3) Total "Invoiced" amount for the customer which is 3,000 in this example.
We are looking for the tables to access and the sequence of access
Since the interface is to be executed more than once in a day ,
the execution time should be optimum
Please suggest
Thanks
Venu

check table VBUK
GBSTK ne 'C' "over all processing status
and FKSTK ne 'C' "open billing orders
at header level
and
for item level check
Vbup tbale
make a join on Vbrk and VBuk in the where condition in addition to the selection criteria add the above two conditions and check the same.
once you have all the open orders enable the items and do the subtotalling and grand total on the item loop.
regards,
vijay

Function module for open sales order and open PO

hi all,
can anyone please tell me that is there any function module to get open sale order and also for open purchase order?
regards saurabh.

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

Open PIR quantity, unconverted Pld orders and open Prod/ STO orders

Similar Messages

Maybe you are looking for