Open Project and it needs to be re rendered

Win 7,  Premier Pro CS4
5 tracks of Video
5 tracks of Audio
Time line lenght 44 min.
Problem:  With the project rendered (all Green, NO red) and saved, project closed and Premier shut down, When it is opened again some segments only a few are red and need to be re rendered.
Q:  Why is this happening???

Geoff,
That takes the externals and the networked drives out of the mix. They often contribute to such issues.
Thanks, two down, and one to go!
Good luck,
Hunt

Similar Messages

  • Why premiere CS% crashes opening project and in encore

    I have 12gb ram- CPU-I-7, NVIDIA 5000 plus graphics card, asus 58P motherboard.
    I have a 2 hour project on my time line. When I open the project, the system crashes and about 5 minutes later works fine. I now want to export the timeline to Encore to make a dvd menu. Encore imports(dynamic Link) the sequence and at the 50% mark, crashes.but does not want to open. I have no idea why systems are crashing. I have not rendered the sequence in premiere pro as I don't know if I need to when going to encore. Comments would be appreciated.
    Leo.

    The symptoms you decribe, white screen, the beachball, the not-responding message and the media pending message all are indicative of a Windows problem. Probably you will encounter the same problem when for instance you have 5 large (2+ MB) .HTML files open in Dreamweaver and those files have been modified enternally and need to be reloaded, especially in split mode.
    It boils down to the fact that when opening your project, PR needs to get all those files from disk, or at least the indexed and conformed files into memory, as well as the .PEK files and while it is waiting for that to happen, it shows the media pending message. Windows itself is usually in a hurry to show the not-responding message, while it is waiting to finish a requested task, even when it is responding, albeit slowly.
    My guess is that you haven't tuned your system yet, see Adobe Forums: Guide for installing and tuning a Vista... which also applies to Win7 and your disk setup may be lacking the necessary speed. After following the tuning steps, you can try to delete the media cache and then reopen your project. It will index and conform your clips again, so be a little bit patient for that process to finish.
    Also have a look here: Adobe Forums: Generic Guideline for Disk Setup

  • When I try to open my iphoto, I get a notice saying the computer can't open it and it needs to be rebuilt, what does this mean?

    When I tried to open my iphoto program yesterday and a box popped up saying ( iphoto is unable to open this library, the library has issues that require rebuilding to correct) Does this mean I have lost all my photos? And how do I rebuild it? I don't understand, It was working fine the last time I used it. Need help!!

    It just needs to rebuild the database. You do have your iPhoto library backed up to an external source just in case?
    And how do I rebuild it?
    Hold down the Option + Command keys then launch iPhoto.
    Select the first option.
    iPhoto 9.0 Help (iPhoto '11): Back up your iPhoto library

  • Not opening projects and grey thumbnail

    Hi, I've done about 5 different movies using iMovie. The projects are done (I didn't export them yet) but for some reason I cannot open them anymore. And the thumbnail is gray, not showing the movie's frame.

    Hi Lolgag,
    I deleted iMovie from my Mac and installed it again using the original installation CD. It solved my problem.
    Hope it solves your problem too!

  • Firfox does not open up and I need to save my bookmarks before I uninstall it

    I recently upgraded to firefox 3.6.8 (the latest version) and since then its not opening up. I click on firefox icon, the window opens up but does not load anything, it freezes eventually and I have to close it down. I can not click on anything in firefox such as bookmarks or tools or file options since it freezes. so I want to save my bookmarks before uninstalling the firefox. Plz help me. Or is there a solution without uninstalling it? I have tried the safe mode but it doesn't work. Plz help me.

    If you have just added an address to your account then it will be an alternate email address - a rescue email address can only be added by answering 2 of your questions. You will need to contact iTunes Support or Apple to get the questions reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use, or you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Open project and NOT have it added to 'open recent' menu?

    It would be great to be able to browse thru several projects without affecting the 'open recent' menu.
    Is this possible with 3.0.2?

    I'm afraid this is not an option. However, you can request it in a future version here:
    http://www.apple.com/feedback/motion.html

  • Im doing a project and I need to know how to make it appear as though a mouth is gone using fcp

    Doing a movie tralier for my final exam (i am a high school student) I tried the layering and the shape but it doesnt look like the mouth disappeared. I want it to look like Neo's mouth from the matrix.
    Thanks

    In Final Cut Pro, go to the menu Final Cut Pro > About Final Cut Pro and it will show a screen with the version number.
    MtD

  • Fire FTP is not working with firefox 4 and i need it badly. how do i do to make it work in the new version?

    sinds i upgrade firefox to the new version 4, fire FTP it's not working. i cannot open it. and i need it badly to work everyday. so i would like to know how to make it work in this new version. what do i do? how i can open it?

    Which version of Fire FTP do you have installed? <br />
    Version 1.99.# is needed for Firefox 4.0+ <br />
    https://addons.mozilla.org/en-US/firefox/addon/fireftp/versions/

  • Netbeans Projects and JRE's

    I have an application that I have developed with Netbeans. I currently use Java 1.5, however I know that many people still use 1.4 and 1.3. So as a service to the end user I used Netbeans to create separate jar files for all three releases - that way the user can select the proper one for the java environment that they have. In Netbeans, this is done by right-clicking on the open project and selecting properties. Once the dialog box opens, there is a field near the bottom that allows you to select which version of java to use - 1.2, 1.3, 1.4, or 1.5. So like I said before I make three different projects, one for 1.3, 1.4 and 1.5. The problem is that all three can only run on Java 1.5. If I try to use an earlier jre such as 1.3 or 1.4 then I receive an unsupported major.minor version error. Has anyone else seen this issue with Netbeans? By the way I just upgraded to Netbeans 5.0, and I say that because Netbeans 4.1 worked correctly.

    I figured out the problem. It turns out that when I change the setting to 1.3 or 1.4 I was only recompiling without first 'cleaning' the project. So the proper steps would be to right click on the project name and select properties. Then choose the target platform from the dropdown box - then hit ok. Now right click on the project again and choose 'clean and rebuild'. This does the trick.

  • Open file and jump to slide

    So now that we have CP4 (well... I have the trial version) is
    it possible to:
    Click on a button to open another project AND jump to a slide
    within this newly opened project.
    I was hoping that using multiple actions I could specify
    "Open Project" and then "Jump to slide"... but no luck so far.
    Cheers,
    K

    Hi KerryWilson
    I'm not sure about the "Almighty" part.
    Although my perspective of God is quite different
    than most. But I digress...
    Since nobody else has jumped on your post, I'll give it a
    shot. I figured Steve or one of the others that are more
    comfortable with the new scripting features of Captivate 4 might
    have a solution. Not sure if the silence means they are busy with
    other things or if it simply means it can't be done.
    So there might be something you can do using scripting and
    variables to accomplish it. Jury is still out on that one.
    oddrhythm has posted their question in many places. Different
    threads in these forum categories as well as in the new community
    help. In one post I did actually offer a possible workaround by
    combining JavaScript and variables to accomplish what they wanted.
    Seems possible but they are wanting something quite different to
    what you asked about.
    Cheers... Rick

  • I just tried to open an indesign project and was told my trial has expired. why is this i need to open this project NOW !!!! also i noticed you're offering creative cloud for 29.99 us, i'm paying 45.00 canadian, why is this?

    i just tried to open an indesign project and was told my trial has expired. why is this i need to open this project NOW !!!! also i noticed you're offering creative cloud for 29.99 us, i'm paying 45.00 canadian, why is this?

    Heathervillistus if your membership is not able to be validated then it is due to a connection error between the computer and our activation servers.  Please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to solve the connection error.
    If you have questions regarding the pricing of your plan then please contact our support team directly at Contact Customer Care.

  • My imovie seems to have completely crashed... and I'm hoping someone can help me. I have moved all my projects and events to a folder on my desktop. I've deleted all the plist files I can find and I still cannot get it to open.

    Please help... it seems all is lost as all I kind find on this subject seem to lead to nowhere. My engagement was on imovie, a school project, several videos of our son. You will have to hold my hand through this process... as I am not very good at this type of thing. I believe I have deleted all the necessary plist files and moved my projects and events to a folder on my desktop. imovie has been upgraded to version 9.0.9... Whenever I open it I just get the beachball and then I have to force quit and I get the following report:
    Date/Time:  
    2013-08-02 23:48:24 -0500
    OS Version: 
    10.7.5 (Build 11G63b)
    Architecture:
    x86_64
    Report Version:  9
    Command:    
    iMovie
    Path:       
    /Applications/iMovie.app/Contents/MacOS/iMovie
    Version:    
    9.0.9 (1795)
    Build Version:   2
    Project Name:
    iMovieApp
    Source Version:  1795000000000000
    App Item ID:
    408981434
    App External ID: 15340117
    Parent:     
    launchd [120]
    PID:        
    1184
    Event:      
    hang
    Duration:   
    2.60s
    Steps:      
    27 (100ms sampling interval)
    Pageins:    
    0
    Pageouts:   
    0
    Process:    
    iMovie [1184]
    Path:       
    /Applications/iMovie.app/Contents/MacOS/iMovie
    Architecture:
    i386
    UID:        
    504
      Thread 0x3dd6 
      User stack:
    27 ??? (in iMovie) [0xf9c95]
    27 ??? (in iMovie) [0xfa12a]
    27 NSApplicationMain + 1054 (in AppKit) [0x92d8fac5]
    27 -[NSApplication run] + 911 (in AppKit) [0x92afeac1]
    27 ??? (in iMovie) [0x1485be]
    27 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113 (in AppKit) [0x92b02752]
    27 _DPSNextEvent + 678 (in AppKit) [0x92b02ee8]
    27 BlockUntilNextEventMatchingListInMode + 88 (in HIToolbox) [0x9c85671a]
    27 ReceiveNextEventCommon + 381 (in HIToolbox) [0x9c8568ab]
    27 RunCurrentEventLoopInMode + 318 (in HIToolbox) [0x9c84f543]
    27 CFRunLoopRunInMode + 120 (in CoreFoundation) [0x9ad10088]
    27 CFRunLoopRunSpecific + 332 (in CoreFoundation) [0x9ad101dc]
    27 __CFRunLoopRun + 1112 (in CoreFoundation) [0x9ad109c8]
    27 __CFRunLoopDoSources0 + 246 (in CoreFoundation) [0x9ace6af6]
    27 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15 (in CoreFoundation) [0x9ace713f]
    27 __NSThreadPerformPerform + 503 (in Foundation) [0x95e5fe0c]
    27 -[NSObject performSelector:withObject:] + 65 (in CoreFoundation) [0x9ad6fd11]
    27 -[ILMediaGroupsTreeController _reloadFinished:] + 715 (in iLifeMediaBrowser) [0x94ff72a0]
    27 -[ILMediaGroupsTreeController setAllGroups:] + 180 (in iLifeMediaBrowser) [0x94ff8dee]
    27 -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 131 (in Foundation) [0x95e2316d]
    27 NSKeyValueDidChange + 279 (in Foundation) [0x95e7bbf1]
    27 NSKeyValueNotifyObserver + 387 (in Foundation) [0x95e59194]
    27 -[ILMediaObjectsViewController observeValueForKeyPath:ofObject:change:context:] + 1217 (in iLifeMediaBrowser) [0x9500538b]
    27 -[ILMediaObjectsViewController syncTreeNodeSelections] + 419 (in iLifeMediaBrowser) [0x9501179d]
    27 -[ILMediaObjectsViewController groupSelectionChanged:] + 233 (in iLifeMediaBrowser) [0x95007225]
    27 -[ILMediaObjectsViewController updateMediaObjectsViewToSelectedGroups:] + 2002 (in iLifeMediaBrowser) [0x9501035f]
    27 -[NSArrayController setContent:] + 858 (in AppKit) [0x92d97f3f]
    27 -[NSArrayController _arrangeObjectsWithSelectedObjects:avoidsEmptySelection:operationsMask:useBasis :] + 856 (in AppKit) [0x92d95aa0]
    27 -[NSArrayController didChangeValuesForArrangedKeys:objectKeys:indexKeys:] + 53 (in AppKit) [0x92d96231]
    27 -[NSController didChangeValueForKey:] + 48 (in AppKit) [0x92b18430]
    27 -[NSController _notifyObserversForKeyPath:change:] + 238 (in AppKit) [0x92b18526]
    27 -[NSObject(NSKeyValueObservingPrivate) _notifyObserversForKeyPath:change:] + 1026 (in Foundation) [0x95e52f44]
    27 NSKeyValueNotifyObserver + 387 (in Foundation) [0x95e59194]
    27 -[ILMediaObjectsViewController observeValueForKeyPath:ofObject:change:context:] + 299 (in iLifeMediaBrowser) [0x95004ff5]
    27 -[IKImageBrowserView(ImageBrowserDatasource) reloadData] + 368 (in ImageKit) [0x9b96ba12]
    27 -[IKImageBrowserView(ImageBrowserLayout) updateLayoutOfCells] + 100 (in ImageKit) [0x9b978e18]
    27 -[IKImageBrowserView(ImageBrowserLayout) updateLayoutOfCellsAtIndexes:] + 174 (in ImageKit) [0x9b978d52]
    27 -[IKImageBrowserView(ImageBrowserScrolling) adjustDocumentSize] + 49 (in ImageKit) [0x9b98170c]
    27 -[IKImageBrowserLayoutManager contentSize] + 100 (in ImageKit) [0x9b9d6fbc]
    27 -[IKImageBrowserLayoutManager updateIfNeeded] + 44 (in ImageKit) [0x9b9d4a9d]
    27 -[IKImageBrowserLayoutManager update] + 213 (in ImageKit) [0x9b9d4a46]
    27 -[IKImageBrowserSubsetLayoutManager updateLayout] + 60 (in ImageKit) [0x9ba0451a]
    27 -[IKImageBrowserGrid computeContentSize] + 399 (in ImageKit) [0x9b941329]
    27 -[IKImageBrowserGrid translationRatioAtRow:] + 63 (in ImageKit) [0x9b94095e]
    27 -[IKImageBrowserGrid validateRowsTranslationsToRowIndex:] + 621 (in ImageKit) [0x9b941015]
    27 -[IKImageBrowserCell aspectRatio] + 44 (in ImageKit) [0x9b94950e]
    27 -[IKImageBrowserCell _computeAspectRatio] + 36 (in ImageKit) [0x9b949585]
    27 -[IKImageCell validateDatasource] + 1118 (in ImageKit) [0x9ba2af82]
    27 -[NSObject(IKImageBrowserItemOptional) IKImageRepresentationWithType:] + 33 (in ImageKit) [0x9ba26f8f]
    27 -[ILMediaObject imageRepresentation] + 533 (in iLifeMediaBrowser) [0x94feffd4]
    27 -[ILMediaObject thumbnailPath] + 86 (in iLifeMediaBrowser) [0x94ff43b5]
    27 -[ILMediaObject _internal_thumbnailPath] + 52 (in iLifeMediaBrowser) [0x94ff4453]
    27 -[ILMediaObject refreshThumbnailCacheInfo] + 62 (in iLifeMediaBrowser) [0x94ff0199]
    27 -[ILMediaBrowserImageManager loadCachedAttributesForMediaObject:] + 48 (in iLifeMediaBrowser) [0x94ffa93d]
    22 -[ILMediaBrowserImageManager loadCachedAttributesForMediaObject:updateIfNotFound:] + 466 (in iLifeMediaBrowser) [0x94ffab14]
    22 -[ILMediaBrowserImageManager updateThumbnailDataXmlForPath:info:] + 116 (in iLifeMediaBrowser) [0x94ffa906]
    15 -[NSDictionary(NSDictionary) writeToFile:atomically:] + 236 (in Foundation) [0x95e2a2fe]
    15 CFPropertyListCreateXMLData + 32 (in CoreFoundation) [0x9ad44640]
    15 _CFPropertyListCreateXMLData + 203 (in CoreFoundation) [0x9ad4471b]
    7 _CFAppendXML0 + 3261 (in CoreFoundation) [0x9ad4561d]
    2 _CFAppendXML0 + 3261 (in CoreFoundation) [0x9ad4561d]
    1 _CFAppendXML0 + 290 (in CoreFoundation) [0x9ad44a82]
    1 _appendEscapedString + 602 (in CoreFoundation) [0x9ad461ea]
    1 _plistAppendCharacters + 80 (in CoreFoundation) [0x9ad44850]
    1 _CFAppendXML0 + 5210 (in CoreFoundation) [0x9ad45dba]
    1 __CFNumberCreateFormattingDescriptionAsFloat64 + 181 (in CoreFoundation) [0x9ad61df5]
    1 CFStringCreateWithFormat + 110 (in CoreFoundation) [0x9ace102e]
    1 __CFStringAppendFormatCore + 6588 (in CoreFoundation) [0x9acdad9c]
    1 _CFAppendXML0 + 2847 (in CoreFoundation) [0x9ad4547f]
    1 CFRelease + 169 (in CoreFoundation) [0x9acde039]
    1 _objc_rootRelease + 47 (in libobjc.A.dylib) [0x99b0854e]
    1 -[__NSArrayM dealloc] + 394 (in CoreFoundation) [0x9ad084da]
    1 -[NSObject dealloc] + 107 (in CoreFoundation) [0x9ad0855b]
    1 _object_dispose + 78 (in libobjc.A.dylib) [0x99b11dc0]
    1 szone_size + 0 (in libsystem_c.dylib) [0x98b64cd1]
    1 _CFAppendXML0 + 2616 (in CoreFoundation) [0x9ad45398]
    1 CFDictionaryGetKeysAndValues + 455 (in CoreFoundation) [0x9aceb567]
    1 CFBasicHashGetElements + 207 (in CoreFoundation) [0x9aceb63f]
    1 _CFAppendXML0 + 3128 (in CoreFoundation) [0x9ad45598]
    1 _appendEscapedString + 653 (in CoreFoundation) [0x9ad4621d]
    1 _plistAppendCharacters + 80 (in CoreFoundation) [0x9ad44850]
    1 _CFAppendXML0 + 2778 (in CoreFoundation) [0x9ad4543a]
    1 CFArraySortValues + 1183 (in CoreFoundation) [0x9ace86ef]
    1 CFQSortArray + 231 (in CoreFoundation) [0x9ace8927]
    1 CFSortIndexes + 1494 (in CoreFoundation) [0x9ad18466]
    1 __CFSimpleMergeSort + 124 (in CoreFoundation) [0x9ad1850c]
    1 __CFQSortArray_block_invoke_1 + 47 (in CoreFoundation) [0x9ad186ef]
    1 __CFArrayCompareValues + 36 (in CoreFoundation) [0x9ad18724]
    1 CFStringCompare + 60 (in CoreFoundation) [0x9acf4c8c]
    1 CFStringCompareWithOptionsAndLocale + 35 (in CoreFoundation) [0x9acf4cc3]
    1 CFStringGetLength + 108 (in CoreFoundation) [0x9acdc97c]
    1 _CFAppendXML0 + 2722 (in CoreFoundation) [0x9ad45402]
    1 CFArrayReplaceValues + 135 (in CoreFoundation) [0x9ace8ac7]
    1 -[NSMutableArray replaceObjectsInRange:withObjects:count:] + 979 (in CoreFoundation) [0x9ad27e93]
    4 _CFAppendXML0 + 3128 (in CoreFoundation) [0x9ad45598]
    2 _appendEscapedString + 340 (in CoreFoundation) [0x9ad460e4]
    1 CFStringGetCharacters + 143 (in CoreFoundation) [0x9aced27f]
    1 CFStringGetCharacters + 20 (in CoreFoundation) [0x9aced204]
    2 _appendEscapedString + 602 (in CoreFoundation) [0x9ad461ea]
    2 _plistAppendCharacters + 150 (in CoreFoundation) [0x9ad44896]
    2 CFDataAppendBytes + 163 (in CoreFoundation) [0x9aceb793]
    1 CFDataReplaceBytes + 487 (in CoreFoundation) [0x9ace9857]
    1 __CFDataGrow + 354 (in CoreFoundation) [0x9acec362]
    1 realloc + 175 (in libsystem_c.dylib) [0x98ba56f6]
    1 malloc_zone_realloc + 84 (in libsystem_c.dylib) [0x98ba47c0]
    1 szone_realloc + 2552 (in libsystem_c.dylib) [0x98b6f6f4]
    1 vm_copy + 167 (in libsystem_kernel.dylib) [0x9a73fa6c]
    1 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x9a741c22]
    1 CFDataReplaceBytes + 727 (in CoreFoundation) [0x9ace9947]
    1 memmove$VARIANT$sse42 + 39 (in libsystem_c.dylib) [0x98b279e4]
    2 _CFAppendXML0 + 3239 (in CoreFoundation) [0x9ad45607]
    2 CFDictionaryGetValue + 135 (in CoreFoundation) [0x9acd6a87]
    1 CFBasicHashFindBucket + 1844 (in CoreFoundation) [0x9acd71d4]
    1 __CFDictionaryStandardEquateKeys + 46 (in CoreFoundation) [0x9ace422e]
    1 CFEqual + 91 (in CoreFoundation) [0x9ace429b]
    1 CFBasicHashFindBucket + 1679 (in CoreFoundation) [0x9acd712f]
    1 __CFDictionaryStandardHashKey + 32 (in CoreFoundation) [0x9acd7700]
    1 __CFStringHash + 125 (in CoreFoundation) [0x9ace0a4d]
    2 _CFAppendXML0 + 2778 (in CoreFoundation) [0x9ad4543a]
    2 CFArraySortValues + 1183 (in CoreFoundation) [0x9ace86ef]
    2 CFQSortArray + 231 (in CoreFoundation) [0x9ace8927]
    2 CFSortIndexes + 1494 (in CoreFoundation) [0x9ad18466]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 259 (in CoreFoundation) [0x9ad18593]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 400 (in CoreFoundation) [0x9ad18620]
    1 __CFQSortArray_block_invoke_1 + 47 (in CoreFoundation) [0x9ad186ef]
    1 __CFArrayCompareValues + 36 (in CoreFoundation) [0x9ad18724]
    1 CFStringCompare + 60 (in CoreFoundation) [0x9acf4c8c]
    1 bcmp + 153 (in libsystem_c.dylib) [0x98b9f1b9]
    1 __CFSimpleMergeSort + 259 (in CoreFoundation) [0x9ad18593]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 259 (in CoreFoundation) [0x9ad18593]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 289 (in CoreFoundation) [0x9ad185b1]
    1 __CFSimpleMergeSort + 259 (in CoreFoundation) [0x9ad18593]
    1 __CFSimpleMergeSort + 400 (in CoreFoundation) [0x9ad18620]
    1 __CFQSortArray_block_invoke_1 + 47 (in CoreFoundation) [0x9ad186ef]
    1 __CFArrayCompareValues + 36 (in CoreFoundation) [0x9ad18724]
    1 CFStringCompare + 60 (in CoreFoundation) [0x9acf4c8c]
    1 bcmp + 132 (in libsystem_c.dylib) [0x98b9f1a4]
    5 -[NSDictionary(NSDictionary) writeToFile:atomically:] + 287 (in Foundation) [0x95e2a331]
    5 -[NSData(NSData) writeToFile:atomically:] + 103 (in Foundation) [0x95e2a51e]
    5 _NSWriteBytesToFile + 60 (in Foundation) [0x95e2a565]
    4 __fsync + 10 (in libsystem_kernel.dylib) [0x9a7445fa]
    1 _NSWriteBytesToFileWithExtendedAttributes + 1253 (in Foundation) [0x95e2aa52]
    1 __rename + 10 (in libsystem_kernel.dylib) [0x9a743b0a]
    2 -[NSDictionary(NSDictionary) writeToFile:atomically:] + 61 (in Foundation) [0x95e2a24f]
    1 _NSIsPList + 793 (in Foundation) [0x95e28608]
    1 _NSIsPList + 659 (in Foundation) [0x95e28582]
    1 -[__NSCFDictionary keyEnumerator] + 97 (in CoreFoundation) [0x9ad5e271]
    1 -[__NSCFDictionary retain] + 25 (in CoreFoundation) [0x9ad3bec9]
    1 _NSIsPList + 770 (in Foundation) [0x95e285f1]
    1 -[__NSCFDictionary objectForKey:] + 28 (in CoreFoundation) [0x9ad3897c]
    1 CFDictionaryGetValue + 135 (in CoreFoundation) [0x9acd6a87]
    1 CFBasicHashFindBucket + 1844 (in CoreFoundation) [0x9acd71d4]
    1 __CFDictionaryStandardEquateKeys + 46 (in CoreFoundation) [0x9ace422e]
    1 CFEqual + 261 (in CoreFoundation) [0x9ace4345]
    1 bcmp + 128 (in libsystem_c.dylib) [0x98b9f1a0]
    5 -[ILMediaBrowserImageManager loadCachedAttributesForMediaObject:updateIfNotFound:] + 411 (in iLifeMediaBrowser) [0x94ffaadd]
    5 -[ILMediaBrowserImageManager loadAttributes:forMediaObject:atPath:] + 79 (in iLifeMediaBrowser) [0x94ffab80]
    5 -[ILMediaBrowserImageManager loadAttributes:forImageMediaObject:atPath:] + 720 (in iLifeMediaBrowser) [0x94ffd6ca]
    3 -[IKImageWrapper saveAsTIFFAtPath:] + 69 (in ImageKit) [0x9b91df81]
    3 -[NSData(NSData) writeToFile:atomically:] + 103 (in Foundation) [0x95e2a51e]
    3 _NSWriteBytesToFile + 60 (in Foundation) [0x95e2a565]
    3 __fsync + 10 (in libsystem_kernel.dylib) [0x9a7445fa]
    2 -[IKImageWrapper saveAsTIFFAtPath:] + 36 (in ImageKit) [0x9b91df60]
    1 -[IKImageWrapper TIFFRepresentation] + 82 (in ImageKit) [0x9b91eb1c]
    1 -[NSImage TIFFRepresentation] + 49 (in AppKit) [0x92d505e3]
    1 -[NSImage TIFFRepresentationUsingCompression:factor:] + 806 (in AppKit) [0x92d50911]
    1 +[NSBitmapImageRep TIFFRepresentationOfImageRepsInArray:] + 56 (in AppKit) [0x92d50dd9]
    1 +[NSBitmapImageRep(NSBitmapImageFileTypeExtensions) representationOfImageRepsInArray:usingType:properties:] + 2439 (in AppKit) [0x92d51768]
    1 CGImageDestinationFinalize + 158 (in ImageIO) [0x961dc693]
    1 _CGImagePluginWriteTIFF + 3885 (in ImageIO) [0x961dd5e9]
    1 CGAccessSessionGetBytes + 164 (in CoreGraphics) [0x99202dbc]
    1 memmove$VARIANT$sse42 + 136 (in libsystem_c.dylib) [0x98b27a45]
    1 -[IKImageWrapper TIFFRepresentation] + 64 (in ImageKit) [0x9b91eb0a]
    1 -[IKImageWrapper nsImage:] + 53 (in ImageKit) [0x9b92139b]
    1 -[IKImageWrapper _nsImage] + 261 (in ImageKit) [0x9b921519]
    1 IKCGImageFromIconRef + 309 (in ImageKit) [0x9b924834]
    1 PlotIconRefInContext + 403 (in HIServices) [0x93b65a15]
    1 PlotISImageRefInContext + 2063 (in HIServices) [0x93b63375]
    1 CGContextDrawImage + 457 (in CoreGraphics) [0x992b0855]
    1 ripc_DrawImage + 951 (in libRIP.A.dylib) [0x9ce94e6f]
    1 ripc_AcquireImage + 1901 (in libRIP.A.dylib) [0x9ce9661d]
    1 CGSImageDataLock + 165 (in CoreGraphics) [0x992b0c5c]
    1 img_data_lock + 8151 (in CoreGraphics) [0x9922867d]
                                                          

    Hi
    Yes this can be many things - and I can only guess/suggest.
    A. a very common origin to make the Mac un-happy is to - PANIC-HALT - when the round multicolored thing appear.
    So much can go wrong by doing this - and if done often problem builds up that can result in a real disaster.
    B. NEVER - move or alter any folder named - iMovie Event's resp. iMovie Project's - as iMovie has no search function - moving them results in that iMovie get's 100% lost.
    One can move them - but this HAS TO BE done within the iMovie application (as it is up and running)
    C. preference files - there are TWO or more Libraries on Your Mac. First and easy to find is the one You see when opening Your Start-Up Hard Disk window = Root Library == the WRONG ONE
    What we need to find is the one in Your User-Account folder (icon as a house) - and this is in Mac OS X.7, X.8 and X.9 HIDDEN. To see it do:
    ( It can be done like this: Open Terminal, then enter:
    chflags nohidden ~/Library
    Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
    or - do like this. 
    On the Finder window at the top left of the screen,
    Hold down the Option key and clicked on Go. 
    This allowed You to see the Library folder and select it. 
    Then keep the Option button pressed down in order to see and select the Library folder. 
    Once found it, You are able to navigate to the iMovie preferences file and move it to the trash.  iMovie then start’s up fine! 
    Now here in Your User Library - find Preferences and trash
    com.apple.iMovie.plist
    com.apple.iMovie3.plist
    com.apple.iMovie7.plist
    com.apple.iMovie8.plist
    com.apple.iMovie9.plist
    com.apple.iMovieApp.plist
    and find
    com.apple.iApps.plist
    While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
    Now restart iMovie.
    I Prefere another way to find out if this is the problem.
    (after all folders (iMovie Event/Projects are moved into original place)
    • go up to Apple Menu
    • Down to System Pref's
    • Select Accounts - Create a new User
    • Go down the Apple menu - Log OUT
    • Log into as the new User
    Now try iMovie
    Does it work at all ? (Yes You don't see Events or Projects in Your original Account just now)
    If so - Then we know that there is a corrupted pref file to be trashed.
    Else - the problem are much more severe.
    D. After Panic Halt / Forced Quit - I always do -. to keep disasters on arms length.
    • Repair Permissions (Apple Disk Util tool)
    • Start from other HD or DVD - then run Repair Hard Disk (Apple Disk Util tool)
    Yours trying to be of help - Bengt W

  • Going back and forth with open projects

    Using Motion 4, is there a quick way to toggle quickly between open projects?
    (aside from going to window menu, and switching there)

    Kinda works? I use Command-~ all the time, does it not work for you? The only thing you need to be aware of is that it also changes focus between the Utility pane and the Canvas of the current project (which is itself quite handy) so you have to press it two times to get to another open project.

  • I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

    I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • HT4591 I have a project that I made in Motion 5.0.1.  I have updated to Motion 5.0.4 since, but the project will no longer open.  Is there a way to revert to Motion Version 5.0.1 at least temporarily so that I can access the project and add a few polishes

    It seems that the 5.0.1 project file has become corrupt.  It was generated on an older MacBook Pro Model (2008) and occasionally acted unpredictably.  We have since upgraded hardware and are working on a much more robust machine, but we need to access this project file to make some final tweaks for the client.
    Is there a way I could revert to Motion 5.0.1 and access this file for the final tweaks?  After these, that project will be laid to rest and I will no longer need an older version of the program.
    Thank you so much for your help guys!  We love Motion.  This is the only issue we've ever run into with the program.
    Best,
    Konstantin

    I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
    In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
    Ross Hunter

Maybe you are looking for