Open raw files in pse 10

why can't I open raw(orf) file in pse 10

Try answering my questions in your other thread
http://forums.adobe.com/message/6099595#6099595

Similar Messages

  • Help opening raw files in PSE 13

    Hello,
    I upgraded PSE 13 from PSE 9. I was using PSE 9 with my Nikon 600 (because I couldn't open the 600 raw files in PSE 9) by using the Adobe DNG converter. This was working fine. Since upgrading I can't open any Nikon 600 raw files in PSE 13 nor can I open the converted DNG files. It only recognizes jpeg files. The "Open in Camera Raw" option in the File drop down menu is also grayed out and can't be selected. I've tried the "updates" option from the Help menu and ran the updates, shut down PSE13 and also shut down computer and it still isn't working.  Wondering if I need to download a new ACR but can't find any that support the Nikon 600. Any help would be appreciated!

    Thank you for your help.
    When I do the "Help" drop down menu there isn't an option for "adobe plug-in" just "about plug-in" which doesn't list any options that seem to help when clicking on and none that say Camera raw.
    I read the manual instructions for downloading and am currently downloading the zip file; it is about 70% done. Will this help?
    This is what I'm referencing:
    These instructions were originally written to install ACR 8.2 for PSE11, but have been updated to install ACR 8.3 with PSE12.  While ACR 8.3 RC would work with PSE11, ACR 8.3 final will not.  Only PSE12 will host ACR 8.3.
    ACR 8.3 will work with PSE12 to open 70D files, but on an older Windows OS like Vista or XP  there is no compatible installer, so a manual install is the only option.  I should also say that the process outlined below does work on my Windows 7 64-bit computer, but I also have PS-CS6 and PS-CC installed on it, so it is possible that ACR 8.3 is dependent on something that wouldn't exist on a computer with only PSE installed on it, but someone else will have to confirm that.
    I was able to get 70D files to open in ACR 8.3 on PSE12 by doing the following:
    Download the ACR 8.3 for Windows update for PS-CC via the direct download link on the Adobe Blog - in the future this link will likely contain links to only newer versions of ACR but the process would be similar:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected
    Unzip this downloaded setup.zip to a folder somewhere.
    Inside the files from that zip is a folder called payloads \ AdobeCameraRaw8.0All-031213015928. 
    (Note that for future versions of PS and ACR the folder name will be different at the end, but the general format shold be similiar, and the important thing is that this is the folder without x64 in the path, because at this point PSE is a 32-bit program so we need the 32-bit version of the plug-in.  At some point in the future, PSExx may be 64-bit and the approporiate file or files could be the 64-bit version for the 64-bit version of PSE.  This zip file is for Photoshop which has both 32-bit and 64-bit versions so there are both versions of the plug-in as well.)
    Inside that folder is another ZIP called Assets1_1.zip so unzip it somewhere.
    Inside Assets1_1.zip there is a file called 1003.  This is the largest or perhaps only file in that zip and is the plug-in you need.
    Copy this 1003 file into the existing PSE12 camera raw plug-in folder:
    C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 12\File Formats or for a 32-bit Windows OS, into:  C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 12\File Formats
    Rename the existing Camera Raw.8bi to Camera Raw_8bi_80 (in case something doesn't work and you need to rename it back, later).
    Rename 1003 to Camera Raw.8bi
    After these steps you have the ACR 8.3 plug-in installed in PSE12 but not the camera and lens profiles, so install those by downloading and installing the DNG Converter 8.3:
    http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows

  • Problems opening raw files in pse 8, using a canon 7D

    Hi I am having trouble opening cr2 files in pse 8 using a canon 7D, it keeps giving me a error msg, "saying it can't read file" it open them fine from my 1000D same format etc. Has anyone got a solution?
    Tahnks R.

    Most likely you need to update your camera raw plugin to version 6.2
    windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807
    mac (6.2 only works in the elements editor and not bridge, 5.7 for bridge)
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4806
    MTSTUNER

  • How can I open RAW files with PSE 12 from Olympus o-md e-m 10?

    How cam I open RAW files ? I use PSE 12, the Olympus om-d em 10 and windows 7.

    Photoshop Elements 12 should be able to recognise raw files from the OM-D E-M10.
    Check which camera raw you currently have by loading the editor, going to the Help menu and selecting About plug-in -> Camera Raw
    If it not at version 8.5 then go to the Help menu and select Updates
    Brian

  • Can't Open NEF RAW files in PSE 6

    I cannot open NEF RAW files in PSE 6. I downloaded the plugin but that didn't fix it. Any suggestions?

    There is another choice.
    You can download the free Adobe DNG Converter, then convert your RAWs to DNG, and then open them in the PSE6 Adobe Camera Raw editor. This doesn't require you updating your software to PSE9, or purchasing anything.

  • I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    I can't open RAW files from new Sony Alpha a6000 camera in PSE 11 camera raw editor. Is there an update that will allow me to do this or do I need to always use DNG convertor?

    You would need to update to PSE 12, or just keep using the DNG converter. Your camera requires ACR 8.4, which isn't compatible with PSE 11. It's also not compatible with PSE 12 if you are running Vista or XP.

  • .NEF RAW file in PSE 11 will directly open in the edit modus

    When I open a .NEF RAW file in PSE 11 it will directly open in the edit modus and skip the RAW editing window what is what I do not want. How to affoid this?

    Are you on a computer that has a very small screen size?
    What is the resolution of your computer screen, in pixels, width and height?

  • How to open Nikon D5300 Raw files in PSE 11? [was:Help Please]

    With My old Nikon D90 Elements 8 would open raw files OK I now have a new Nikon D5300 and when trying to open a raw file it tells me that it is the wrong type of file Help Please
    Andy

    There isn't a generic nikon raw. Each camera has its own raw format and the camera raw plugin has to be updated every time a new camera comes out. The D5300 requires ACR 8.3, which is only compatible with PSE 12. So you have three options:
    1. Upgrade to PSE 12.
    2. Use the nikon software to convert the files and send the converted images to PSE for any further editing.
    3. Download the free Adobe DNG converter and use that to create dng files that your version of camera raw can understand.

  • Photoshop Elements 9 and cannot open Raw files from my Canon EOS 1000D camera.

    I am using Photoshop Elements 9 on a Windows 7 based PC and would like to know why I cannot open Raw files produced by my Canon EOS 1000D camera.
    I have checked the version of the plug in as 6.5 for raw files which is supposed to open .cr2 files and should be compatible according to Adobe site info.
    any ideas for next move.
    Mick

    Hi,
    According to all of Adobe's charts, the Canon 1000D should be supported by the basic PSE 9 even without updates. When you said you checked the camera raw version in PSE, did you do that by going to the Help menu and selecting About plugins -> Camera raw?
    The Canon 1200D requires ACR 8.4 which is only compatible with PSE 12 - so for PSE 10 your brother would need the DNG converter.
    I can't find a sample raw file to try (I do have PSE 9). If you want to upload a sample file to dropbox and give me access, I could try it on my system.
    Have you tried opening one of your files on your brothers system?
    Nrian

  • Can't open raw files in 32 bit CS4

    Am using Vista 64 bit OS and because I recently purchased Nik Software's Complete Ed was necessary to change from initial set up of PS CS4 64 bit to 32 for their usage compatability. Had Camera Raw 5.0 on 64 bit version, copied camera raw 8bi plug in file format and placed in correct file format folder for the 32 bit version of PS. ...sounds easy enough...but when I attempt to open a raw file in PS or bridge it will not open and get message - Could not complete your request because of a program error.  Camera raw does show up and only once under the About Plug In submenu. Have tried Purge Cache option. Can still open raw files as always in 64 bit version, save and reopen 32bit version to continue but hoping for solution to eleminate that hassle. Thanks for your needed advice!  

    Plugin's have to be rewritten for a 64-bit environment so copying the 64-bit ACR to the 32-bit folder won't work.  You need the 32-bit version of ACR in the 32-bit CS4 folder.
    I'm not sure if the ACR 5.6 updater will work to update both versions, or if you need to download and install the plugin's manually. 
    You can get to the manual install ZIP by following the PSE link near the top of the regular ACR 5.6 page linked on the updates page:
    http://www.adobe.com/downloads/updates/

  • How do I upgrade elements 10 to open raw files from my Canon 70d?

    How do I upgrade elements 10 to open raw files from my canon 70d?

    Normally, if there are any updates for your version of PSE then they should be offered to you automatically.  However, you can also check if there are any new updates by going to:
    Help >> Updates
    If your camera is relatively new then even by getting the updates you may not be able to edit raw files from the new camera because old versions of PSE are normally not updated as soon as the new version hits the market.  We are currently at version 13 so version 10 was stopped long time ago.  However, you can see a workaround at this link where I posted a video to get things moving:
    <Why can't I open my RAW files from my Nikon D7000 ?? I can open RAW files from my old Nikon D70's but not my D7000...>
    Hope this helps.

  • Opening RAW files in Bridge

    According to p. 235 of "Photoshop Elements 8 for Mac", you are supposed to be able to right click on a RAW file in Bridge, and then you will presented with a pop up menu displaying the menu item "Open in Camera Raw".  Clicking on "Open in Camera Raw" in Bridge is supposed to give you access to the full set of ACR features that Photoshop CS4 users enjoy.  On the other hand, using PSE 8 to open RAW files results in a stripped down set of features in ACR.
    Unfortunately, I am unable to open NEF files (Nikon's RAW files) in Bridge. When I right click on a NEF file in Bridge, there is no menu item which says "Open in Camera Raw". However, if I right click on a .jpg file in Bridge, then I do see the "Open in Camera Raw" menu item.
    I am able to open NEF files in PSE 8 and edit them with ACR using the stripped down feature set.   My PSE 8 came with ACR 5.5.  I installed ACR 5.6 to see if that would help, but I get the same results.
    osx 10.4.11, PSE 8 for mac, ACR 5.6

    Hmmm. Works for me -- when I right-click on a NEF file in Bridge (or select and then click on the "open in RAW" icon in Bridge's top menu bar), it works fine for me. I see the full-featured ACR. I use ACR 5.6, PSE Mac 8, and OS X 10.6.2.
    When you installed ACR 5.6, you followed the PSE-specific instructions, right? In Preferences, you've got NEF associated with PSE? And you're not trying to mix-and-match Bridge and iPhoto simultaneously?
    So far, the only difference is I'm using Snow Leopard. And i've never installed NX2 et. al. Not that it should matter, but which camera are you using?

  • I can not open raw files in elements 12 any help please?

    I can not open raw files from my Nikon D610 in elements 12. (I have already downloaded raw converter 8.3 but to no avail) any help please would be appreciated.

    Hi,
    Can you confirm which Camera Raw PSE 12 is actually using by loading the editor and going to Help -> About Plug-in -> Camera Raw.
    If you do Help -> Updates it may install the latest camera raw of 8.4 - not on XP or Vista systems.
    Do you use any Nikon software to download the images? The older versions have been known to corrupt the files.
    See the following for more info.
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html
    Brian

  • Can't open any files in PSE 11

    What is "NEF is not a valid win32 application when" when I attempt to open a Nikon NEF (raw) file in PSE 11
    Also happens with JPEG.

    Check on the PSE forum http://forums.adobe.com/community/photoshop_elements

  • Can't open RAW files from a Canon 70D

    Can't open RAW files from a Canon 70D with Photoshop Elements 12.  Is there an upgrade / download available.  Current RAW plug in is version 8.0.0.137

    What operating system are you using?
    The newest version of camera raw for pse 12 is version 8.4, which should open the canon 70D files.
    Have you tried Help>Updates from within the pse 12 editor?

Maybe you are looking for

  • How to get ScreenInsets in JDK1.3

    Hi, Do anybody know how to get the size of windows taskbar (basically ToolKit.getScreenIInsets() that is in 1.4) in jdk1.3. Or atleast is there anyway to know that where the taskbar is present? (at left/right/top/bottom). Or anybody have any workarou

  • HT4623 HOW TO KNOW MY I PAD MODULE

    i buy a new i pad and i want to know what`s my module ?

  • Gnome Login Manager??

    I have installed gnome extras and cant find the package with Login Manager. How do i changed themes and edit it so i dont have to enter password each time i log on? I have gnome-system-tools installed. Is there another package that contains the Login

  • Warning: Solaris 10 x86 jumpstart (grub) from Solaris 8 server

    Hi all, I'm just posting this here in case someone comes across the same problem I did. When trying to do a custom jumpstart installation on x86 boxes from a Solaris 8 SPARC server, Grub was failing to do TFTP of the "multiboot" and "x86.miniroot" fi

  • Dynamic Host Name -- Roadrunner

    I have a linux box that I would like to install Oracle 8i on for development purposes. I use this PC from home connecting to the internet using Roadrunner. The problem comes in that Roadrunner assigns me a dynamic server name/address each time I log