Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Similar Messages

Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

Hi,
   Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
   What could be the reason ?
   Pls help.
Regrds,
Binayak
Message was edited by:
        Binayak Ghosh
Message was edited by:
        Binayak Ghosh

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Open sales orders value not updating currectly in sales value of CM

Hi SAP experts,
I have an issue some of customers credit exposure value showing worng value.We are using static credit limit check.
customers credit limit RM20000,
open sales order valueRM6,073.77
open delivery=0
open billing =0
open items(recievables)=3,464.39
Credit exposure =9,538.16.
But i have checked in VA05 its showing 13,001.10 value, i have checked all areas didnt get any solution.
I have run the reports RVKRED09 and RVKRED77 , RVKRED88 also no updates in the credit management.
is there any other areas i need to check, advise me.
Regards,
Nooka

The only thing you really need to check is RVKRED88.
It is not the correct procedure to compare the open sales order value with the sum net value of VA05.
In VA05 open documents are displayed indifferent whether they are already part-delivered or not. That's why the open values from the VA05 are not directly comparable with the values in RVKRED77.
As described in OSS note 716141; reports RVKRED88/77 shows the correct value which should be in your system.
If you need to know more let me know.
Thanks,
Gerard

Sales Order Text not getting copied after configed with tcode VOTNX

Hi All ,
We have configed one of sales order texts to be copied from customer master text at sales org level .
It works fine for some sales org , But for some it does not and says "Text could not be structured " in log .
I tried to debug while creating sales order , But unable to reach the point where the texts are copied .
Any help would be appriciated .
Thanks
Vinay

Wanted to add more thing ,
The log Says that the error is recogized by the sapscript FM INIT_TEXT.
Thanks
Vinay kolla

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Not Updating Open Sales Orders Value for CreditManagement

Hi Frendz,
This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value is 10th.
Let me know Where i have missd settings.
Hari Prasad

hello,
it is maintained against the cr control area in ent structure.
one needs to change there.
r u in prd system or development?
becoz if prd, then this change will effect a lot of ongoing docs.
rgs,
AK

Update open sales order values. - Update rule.

Hi
In library below information given for the updation of open sales order value in infostructure. Can any one please explaing how can we configure below two rules.
An update rule describes the set up of the open sales order value, i.e., the open sales order quantity. The second update rule describes the reduction of open sales order value, i.e., the open sales order quantity by the corresponding deliveries.
http://help.sap.com/saphelp_47x200/helpdata/en/96/dfec3410b5f563e10000009b38f83b/frameset.htm
Path: LIS - SIS - How the key figures are calculated - open sales order value.
Thanks in advance.
Raj.

Any inputs please.....

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

How to Avoid Open Sales Order Value from Credit Check

Hello Everyone,
We have a problem with Credit Management, When my user run the execute credit master sheet, system is considering open sales order value under Credit limit used. My user do not want consider open sales order value, they want only Open delivery and Open Billing value need to appear in Credit limit used.
Is it possible to avoid open sales order values, if yes what setting i need to do....please help me.
Thanks
Sudheer

Sudheer,
You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
In the credit controal settings, you need to have settings for the credit check at the delivery level.
Hope this will solve your issue.
Regards,
Chetan
Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

Where is Open Sales Order Value coming in Credit Master sheet?

We have a customer whose credit exposure is below credit limit. I'm in Customer Credit Management overview screen and I ran Credit Master sheet report (for this CMR) under Environment -> Reporting -> Credit Master Sheet.
I see value in Receivables and Open Sales Order Value which sums up to Credit Exposure Value. I'm wondering which sales orders are considered to calculate open sales order value?
I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value.
I manually compared Open Sales orders based on Horizon date, the value that I'm arriving is kind of close of Open Sales Order Value in Credit master sheet report.
Update rule used is 000012 in automatic credit control screen.
Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
Appreciate any help!

. I'm wondering which sales orders are considered to calculate open sales order value?
Those customer orders which are relevant for credit limit. Please let me know if you are talking about something different?
I ran different order reports like VA05 and some custom reports available, but I could not find a direct report that matches the open sales order value
.You can not compare the VA05 open sales order report with FD32 open sales order report.
You can find out the open order values of Credit manangement(FD32) in S066 table.
Please let me know if there is an easiest way to find data behind Open Sales Order Value in Credit master sheet report.
For open sales order you can find out in S066 table and sales values in KNKK table

When MSKA (Sales Order Stock) table get updated?

Hi,
May I know when MSKA(Sales Order Stock) table get updated?
Regards,
thiyagu

suppose a sales order has been created of 10 MTS and Production Person give me 5 MTS against the sales order by creating Planned Order& Production Order wrt Sales Order,then 5 MTS will be updated into Unrestricted - Use.
If suppose Material is Return Delivery ,then after MIGO , it goes to Quality Inspection,then this Quantity will Updated in to Stock in Quality Inspection .
Hope ,it will help you.
Best Regards,
Ankur

SQL Open Sales Orders Value using today's currency rates

Hi experts,
I am creating a report for displaying the open sales order values (and other fields) using current currency rate (where applicable). I developed the below query. The only problem with this query is that it ignores the order rows in which the currency field is blank (Don't understand why this happens in SAP). Do you have other ideas?
Thanks & Regards,
IC
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name", T1.ItemCode,
T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM', T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered", T1.OpenQty as 'Bal Qty', T1.Price*T1.Quantity/T4.Rate AS "Ord Value (GBP)", T1.Price*T1.OpenQty/T4.Rate AS "Open Qty Val (GBP)", T1.Price/T4.Rate AS "Price (GBP)", T1.Price*T1.OpenQty as "Ord Value (BP Currency)", T1.Price as 'Price (BP Curr)', T1.Currency as 'Cur Ind', T4.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod, ORTT T4 WHERE T0.DocCur <> 'GBP' AND T1.Currency=T4.Currency AND T4.[RateDate] = [%0] AND T1.OpenQty > 0
UNION ALL
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name", T1.ItemCode, T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM', T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered", T1.OpenQty as 'Bal Qty', T1.LineTotal AS "Ord Value (GBP)", T1.LineTotal/T1.Quantity*T1.OpenQty AS "Open Qty Val (GBP)", T1.LineTotal/T1.Quantity AS "Price (GBP)", T1.Price*T1.OpenQty as "Ord Value (BP Currency)",T1.Price as 'Price (BP Curr)', T1.Currency as 'Cur Ind', T1.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod WHERE T0.DocCur = 'GBP' AND T1.OpenQty > 0 ORDER BY 2,1

Hi,
Try:
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name",
T1.ItemCode, T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM',
T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered",
T1.OpenQty as 'Bal Qty', T1.Price*T1.Quantity/T4.Rate AS "Ord Value (GBP)",
T1.Price*T1.OpenQty/T4.Rate AS "Open Qty Val (GBP)", T1.Price/T4.Rate AS "Price (GBP)",
T1.Price*T1.OpenQty as "Ord Value (BP Currency)", T1.Price as 'Price (BP Curr)',
T1.Currency as 'Cur Ind', T4.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
LEFT JOIN ORTT T4 ON T1.Currency=T4.Currency AND T4.[RateDate] = [%0] AND T4.Rate != 0
WHERE T0.DocCur != 'GBP' AND AND T1.OpenQty > 0
Thanks,
Gordon

The pricing procedure in Sales order is not getting copied into invoice

The pricing procedure in Sales order is not getting copied into invoice.
I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

Hi
Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
Regards
Srinath

Consumption values not getting updated on the material mastere

HI Gurus,
can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
Thanks
Anushga

Dear ,
Use tcode - OMJJ and then do the following setting -
for movement - 261,262, 201 and 202
Statistically relev. - 2
Consumption posting - R
for movement - 701 and 702
Statistically relev. - 2
Abhinay
Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

Stock not getting updated after confirmation of order

dear all
In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solution

Hi
1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR" enabled.
While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
Regards
Krishna
Regards
Krishna

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Similar Messages

Maybe you are looking for