Open the WebI report from Xcelsius dashboard

Hi All,
I would like to know how to open the WebI report from the xcelsius dashboard.
Looking at the previous posts I followed the following steps to implement the same but that is not working.
Inserted the component URL button and used the folowing link:
http://servername/OpenDocument/opendoc/openDocument.jsp?sType=wid&sIDType=XXX
But this is givingerre: " Internet Explorer cannot display the webpage"
Also, tried the copying the reprot link, but that is opening the Infoview login page.
I want the report to opened when we click the URL button.
Could someone please provide me a solution.
Thanks in advance.
Regards
Sindhu

did you try passing the iDocID parameter? When prompted did you try to login to InfoView and check whether Report gets displayed?
Ideally the URL should be as below:
[http://<server>:<port>/OpenDocument/opendoc/openDocument.jsp?iDocID=<cuid_of_the_document>]
If you want to bypass the logon screen,you need to modify the OpenDocument.jsp to pass logon token to the above URL i.e.token=+token where the +token is being retrieved by sdk.

Similar Messages

  • Open a webi report from a Dashboard components

    Hi All,
    I have created a dashboard using Dashboards 4.0.It has a bar chart,line chart,combination chart.all these chart on X-Axis have month names as dimensions and y - axis shows different measures.
    So now the requirement is the user wants to select any month from any one of the chart at one particular point of time.then the dashboard should open a Detailed Webi report( created in BI Launch pad) for the selected month and display that month data in a new window.
    I know that we have to use the URL button in Dashboards for linking a webi document.
    However i would like to know how to pass the selected month from the dashboard by selecting a particular month from any of the graph component as a parameter to the respective Webi report in BI Launch pad.
    Hence any body how to implement this in Dashboards please let me know the step by step process.
    Thanking you,
    Regards,
    Naga Nanda Kishore.

    Hi Kishore,
                Month name should be prompt for the Detail  Webi Report, so when u clicked on bar its going to carry that Month as Well. And Syntax for adding Month will be like below.
    Suppose if it is Sample Open Doc:
    /BOE/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Fq0JoFNoywYADK0AAADHRQkAABVdEABC
    So u have to use this Syntax for Month
    lsSMonth=+ Map the Cell where month is capturing. (Note:In  lsSMonth Month is next of Prompt for month in Detailed Report.
    And final URL will be
    "/BOE/OpenDocument/opendoc/openDocument.jsp?mistype=CUID&iDocID=Fq0JoFNoywYADK0AAADHRQkAABVdEABC&lsSMonth=+Selected Month"
           (Open Doc)                                                                                                                                                          (Sending         (Selected                                                                                                                                                                                       Month)                 Month)
    And For trigger the URL button you have keep trigger URL when Month Value changes(Based on Selection), means you have map trigger cell to destination of Bar chart Month Destination.
    Thanks and Regards
    Sateesh

  • How to connect Already created WebI reports with Xcelsius Dashboards

    HI Experts,
    My requirement it to bring data from already in use WebI reports to a consolidated Dashboard. I am aware of connecting universe with Dashboard with the help of QaaWS.
    Is there is any other way that we can connect our dashboard?
    We are thinking to publish those dashboards on the SAP Enterprise BI Portal.
    Thanks in advance!!!
    Edited by: BIBO_Apprentice on Aug 13, 2011 7:40 AM

    Hi,
    One can connect WebI reports with Xcelsius dashboards in 3 ways:
    1. Using QaaWS : connects universe with Dashboard. Dashboard uses the WSDL link to get data that works on SOAP (that works on exchanging web structures).
    2. Using Live Office Connection: With the help of Live Office one can connect the WebI reports directly. One can take advantage of the scheduled instances of the WebI reports. So it is good for time consuming reports.
    3. Using BI Web Services: Here custom web services are created of intended report instances. Publication is done from CMS side.
    after that WSDL is used as any other web services.
    Get back if you need any further clarification.

  • Window.open function in java script used to open the BI report from APEX

    Hi,
    I have some oracle reports now which I converted to BI publisher and the reports are now in BI publisher.
    My question is
    To open the BI report from APEX using a button the following code i have written
    window.open
    ('http://bipubdvserver/xmlpserver/testreport/testreport.xdo?_xpf=&_xpt=1&p_dept_no=&deptno',"mywindow");
    I want to pass the parameter deptID dynamically to call the BI report.
    But when I click on the button it is showing the file open/save dialog box without accepting the parameter and finally showing the blank pdf.
    but I want to enter the parameter value dynamically that is when click on button it should allow me to enter the deptno eg. 10 then should show the data related to dept 10 in pdf..
    how to accomplish this could you please help me.
    thanks very much in advance.

    i got this please ignore the post.

  • Cannot open the webi reports

    hi guys,
    i have a problem opening a webi report.
    Actually, CMS and Bo are installed in different server. The reports which are connected to cms are not able to load where as the report connected to standalone are loading properly.
    I'm not getting any error when i open the reports which are under cms but it just hangs on loading the report.
    How could i solve this problem?
    regards
    sunil

    hi Rongliang,
    this is the trace log of webi
    kdgWICDZCore.cpp:3592:enum wicdzCore::WICDZCoreStatusCode __stdcall wicdzCore::dgWICDZCore::getCurrentDocToken(class bo_utf8string &): TraceLog message 1
    2010/05/19 04:53:43.122|>>|E| | 2384|5672| |||||||||||||||expression failed: m_curDocPtr
    kdgWICDZCore.cpp:3592:enum wicdzCore::WICDZCoreStatusCode __stdcall wicdzCore::dgWICDZCore::getCurrentDocToken(class bo_utf8string &): TraceLog message 2
    2010/05/19 04:53:43.200|>>|E| | 2384|3192| |||||||||||||||expression failed: m_curDocPtr
    kdgWICDZCore.cpp:3592:enum wicdzCore::WICDZCoreStatusCode __stdcall wicdzCore::dgWICDZCore::getCurrentDocToken(class bo_utf8string &): TraceLog message 3
    2010/05/19 04:53:43.294|>>|E| | 2384|3712| |||||||||||||||expression failed: m_curDocPtr
    d:\Mira_RTM\src\Framework\export\iface\sdk\common\scomobjectbase.h:65: TraceLog message 4
    2010/05/19 04:53:44.903|>>|A| | 2384|3720| |||||||||||||||assert failure: (d:\Mira_RTM\src\Framework\export\iface\sdk\common\scomobjectbase.h:65). (m_ObjectLocale!=0 : class ATL::CComObject<class CComEventObjects>).
    d:\Mira_RTM\src\Framework\export\iface\sdk\common\scomobjectbase.h:65: TraceLog message 5
    2010/05/19 04:53:44.903|>>|A| | 2384|3720| |||||||||||||||assert failure: (d:\Mira_RTM\src\Framework\export\iface\sdk\common\scomobjectbase.h:65). (m_ObjectLocale!=0 : class ATL::CComObject<class CComEventDetails>).
    regards
    sunil

  • Reg accessing the webi reports from visual C#

    Hi,
        I m using visual studio 2005 c#.Can some one throw lights on how to access the webi reports using this environment....
    Thanks & Regards
    Rakul Alagu.

    Thank you for you reply! So there is no way to access a Crystal Reports Server from an arbitrary application using URLs out of the box? I would have to implement this "automated access" feature inside the server by myself. Is this correct?
    If this is the case, I think I will do the whole report generation without a dedicated Crystal Reports Server. I have compared different alternatives for replacing the old RDC component of the C++ application described above. I think the best way would be to replace it via the JRC API of CR4E 2.0. In this case, I would have to access the Java API via JNI or by calling an external Java program, which generates and exports the reports.
    In both cases (CR Server vs. JRC API) I would have to implement new application logic. But a dedicated Crystal Reports Server needs to be maintained and administered... And I think the Crystal Reports Server would be a bit oversized for my purposes (generating and exporting reports)...
    If somebody has got other suggestions for replacing the RDC component (CR XI R2) inside a C++ application in order to use this application under Linux, I would be thankful .

  • Error when geeting the WebI report into Xcelsius using LiveOffice

    Hi All,
      I am using Xcelsius 2008 SP2 and Live Office. I run the report in the WebI and I am trying to get the report into Xcelsius using the live office. When I go to live office and select web intelligent I  am able to see the report it the InfoView but when I go to next step to insert into live office I am getting the below error "
    An error occurred when an object was selected in the report part viewer.(LO 02026)
    Maximum character output size limit reached. Contact your BOBJ administrator(Error: ERR_WIS_3072)".
    Could any one please help me.
    Thanks
    Muvva

    Hello Raghavendra,
    What is the size of the WebI report? There may be a limitation to the rows of data you can pull into Live Office.
    If this is the issue, you can avoid it through an alternative connection method called the [Xcelsius Web Intelligence Integration Suite.|http://antivia.com/products-xcelsius.stm]
    You can use this to connect Xcelsius directly to WebI, without the need for Live Office.

  • Opening a instance of a webi report from a dashboard

    Hi everyone.
    What's the syntax for opening a particular instance of a report in Infoview from a dashboard?. We have this daily report that gets generated everymorning and users want to be able to drilldown from our dashboard by selecting a date from the calendar. So if the user clicks ysterday's date, the instance of the report that was generated yesterday should be opened, not the latest one.
    Thanks.

    Hi Alden,
    Refer to page (66/82) of
    [Viewing Reports and Documents using URLs|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf] guide.
    One of the opendoc parameters you pass should be "sInstance" and your URL should look something like
    http //<servername>:<port>/OpenDocument/opendoc/openDocument.jsp?<parameter1>&<parameter2>&...&sInstance=(either Last/User/Param)
    Thanks,
    Subhodeep

  • Calling a webi query from xcelsius dashboard

    Hi Experts,
    I have created an xcelsius dashboard with a URL link to a detailed webi report.  I'm using open document to launch the webi query and with 1 parameter value to pass over from xcelsius to webi.
    The URL is http<server:8080/OpenDocument/opendoc/openDocument.jsp?mode=full&appKind=InfoView&isApplication=true&nbPrompts=1&sIDType=CUID&sRefresh=Y&iDocID=AbgeiGFRMSlGtxcmjJeCRJM&appKind=InfoView&service=%2FOpenDocumentls%lsSProject=$A2. 
    Cell $A2 contains the value of the project selected by the dashboard user.
    This URL does call the correct webi query but the webi query still prompts for the project.  The 'Project' prompt in my webi report is set as optional and I have ticked the 'Refresh on open' check-box before saving the webi query.
    How and what else do I need to do to by-pass the webi prompt for project?
    Please let me know.
    Thanks very much,
    Anthony

    Hi
    Place the url in one cell and your passing prompt in another cell.concatenate both the cells and pass that to your url button.
    eg:
    in cell I6: http://sever:8080/OpenDocument/opendoc/openDocument.jsp?sType=wid&iDocID=AaHo4EFB5rhPplDJTrHLM6o&sIDType=CUID&lsSPlant=
    in cell D5: 1002
    in cell I7: concatenate(I6,D5)
    Pass this cell to your Url button.
    Regards,
    Peri.

  • Error occured when try to open the BI report from words (template builder)

    Hi,
    After i LogOn into BI Publisher thru words, successful. But when choose a report to open, error returned as "Error occured. Please check the settings and try again."
    My team had do various of testing, try to reinstall the BI publisher desktop, but not able solve the problems. From the forum, someone comment is due to data loaded too large, so we try to put a query which only select single record from a small database, but still same error.
    then we suspect is due to the proxy setting, because once i reset to bypass the proxy, i able to open the report thru words without any error.
    i found this comment from online doc :
    Have set up the proxy parameters (to avoid any firewall problems with the Web Services and RSS data set reports) in the xmlpserverstart.bat file or the oc4j.cmd file as per your installation.
    Modify the following line, which defines JAVA_HOME. (Observe the proxy parameters in bold.):
    •     "%JAVA_HOME%\bin\java" %JVMARGS% -jar -Dhttp.proxyHost= <myproxy.mycompany.com> -Dhttp.proxyPort=<Port> "%OC4J_JAR%" %CMDARGS%
    Restart xmlpserver or oc4j as the case may be.
    but i can't found this xmlpserverstart.bat or oc4j.cmd from server.
    Please comment.
    Thanks
    Regards
    Eelyn

    hi,
    as per you query posted here, please chk ur sql statement what u had written...there may be some problem with that query that is y ur getting the below error.
    "error occured. please check the settings and try again BI publisher"
    regards
    Kanoj

  • Can't Launch the Web Report From Reports Builder

    Hi All: I just installed Oracle Reports 10g. I've used the product a lot an have never had a problem. This time when I press the "Run Web Layout" button, Reports works for several seconds and stops. THe Web page is not displayed in the Browser.
    If uninstalled Reports Builder and reinstalled. I'm at a loss as to what to look for.
    Any thoughts would be appreciated?
    John

    I'm in exactly the same position.
    Normally I just do some work, hit Ctrl+R to run it and get my output.
    Now it just sits there for a while, and then the web browser trys to go to this address :
    C:\Documents and Settings\hilliers\Local Settings\Temp\docroot\test report07602672.htm
    which is a blank page.
    I thought it was meant to run a reports servlet, but that could be just my memory.
    However - I've noticed that in this report, there is no + next to Web Source in the object navigator, which I think means there is no web layout. So the report actually is running, but has no output.
    Thats my guess anyway.

  • Encode & in Opendoc link to open a webi report

    Hello,
    We are trying to launch a webi reports from a dashboard  and we are using URL (opendoc command)
    One of the parameters is called the company name which has an & sign eg ( ABC & Associates).
    When we try to run the webi report it never populates the data because of the name containng an &.  We did try to convert the & to a %26. However this resulted in Xcelsius converting our % sign to a %25  giving us a final value of a %2526.
    Is there a function available to encode the URL to solve this issue
    AP

    Hi,
    Are you using Xcelsius 2008? Then the URL will be encoded automatically.
    If you are using Xcelsius 4.5, then you will have to write a simple jsp (using java.net.URLEncoder.encode), and then use "XML data" data connectivity to connect to this jsp.
    Hope this helps,
    Bobby

  • Error (IES10901) (WIS 10901) while refreshing the Webi report

    Hi Gurus,
    We have created webi reports using Universe design tool on top of BEX Query based on 0SD_C03 cube and now we are facing Database error: A runtime exception has occured. (Error loading cube 0sd_c03 (catalog : % 3). (IES 10901 ) (WIS 10901) while trying to refresh the Webi report from Data Access--> Edit--> Run Query while its running fine when I refresh the report using refresh button option in Webi.
    When I run the the query in rsrt its working absolutely fine.
    Note that we are using BOBJ 4.0 SP7 and this issue has come recently.
    Any idea or help on this would be appreciated.
    Regards,
    Monil

    Hello Monali,
    are you getting this error constantly or sometimes?
    what type of connection are you using for your Webi report
    Is it Specified user name/password OLAP connection or SSO Olap connection
    If your are using Specified user name/password OLAP then try with SSO connection because SAp recommendation is not to use  Specified user name/password OLAP connections..to resolve this kind of issues please restart DSL bridge..
    Regards,
    Naveen D

  • Report data ( value ... tag) missing in the Webi report retrieved through RestFul Webservice

    I am trying the below URL to get the WEBi report from SAP BO using the Rest Webservice support that is now available.
    http://{serverIP:serverPort}/biprws/raylight/v1/documents/{documentId}
    I am able to get the report but as I compare the same report response when using SAOP Webservice, there seems to be a mismatch in the response. Here is what I see in the SOAP response:
    </td><td c="1" ><cell  ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" sid="-10"><ct >Some arbitrary value</ct><value type="xs:string">Some arbitrary value</value></cell>
    But when I run it through REST, I am missing the <value ..> tag:
    </td><td c="1" ><cell  ref="1.E.4t" bid="14" h="26" w="231" pad="6,7" bt="1" sid="-10"><ct >Some arbitrary value</ct></cell>
    Apart from this right at the start of the xml response, I see some property mismatch as well.
    SOAP has this property extra:
    <property name="output.format.xml.valuemode">yes</property>
    While REST has these property extra:
    <property name="output.format.xml.option.style">1</property>
    <property name="output.format.xml.styledict.fontplatform">html</property>
    <property name="output.format.xml.td.bandinfo">yes</property>
    <property name="source.selected">data</property>
    <property name="xelement.xml.object">yes</property>
    <property name="xelement.xml.object.usemap">yes</property>
    <property name="xelement.xml.object.usersupportedformat">image/png</property>
    I am not sure if:
    the <value ...> tag miss is because of these missing/extra properties or
    current REST support has some issues
    For my application the value tag is a must and I can't do without this, but with REST it seems no way to obtain that.
    Any help or pointer(s) in this regard is appreciated!

    Hello Milind,
    According to our Product Owner Sam Polichouk, the solution should be available for you in 4.1 SP3, which is currently scheduled for release by the end of March 2014 (subject to change).  The product team recommends that you get the raw, unformatted data values from within the Dataset specific call.  This data contains a type to tell the end user what kind of data it is, so you can format it or use it properly.
    The updated documentation for the SDK will be available at SAP BusinessObjects Business Intelligence platform 4.1 – SAP Help Portal Page once the Support Pack is publicly released.

  • Open a crystal report from WAD with passing  the variables values

    Hi,
    I need to know is there any way to link SAP WAD to crystal reports (open a crystal report from WAD)and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
    Maybe we need to pass parameter by WAD URL but this is just my assumption and have no idea how to do this with passing variable values.
    right now I know the method of how Bex queries which are used as data source for crystal reports but in my current scenario we have the structure like this that bex queries link with WAD and then WAD is linked with crystal reports.
    No doubt that Crystal report is target option in RRI but there the source is Bex Query only but in current scenario we are looking  WAD (web template) as a source to crystal report or crystal report called in WAD.
    Please suggest something on same.
    Thanks
    Take care
    Vishal sharma

    Hello Vishal.
    Did you find a solution for this problem?
    I'm facing right now the same problem, I need a way to link SAP WAD to crystal reports (open a crystal report from WAD) and pass the values of the variables which are entered in the Web App. (e.g. Customer id,year) should be passed to the Crystal Report.
    Have found an answer to this issue? If yes, please kindly inform how have you solved this.
    Best Regars
    Armando Santos

Maybe you are looking for