Open TRs show in LL01 for Mvmt type 261, wrong SL on production order

Hi all,
I have the following issue
We have roughly 2000 open transfer requirements related to movement type 261 GI to order. They all show up as critical processes in LL01 (Warehouse Activity Monitor)
I have looked at the production orders being created and some of the components in those production orders show the wrong storage locations, which I am almost sure is the reason for the stranded TRs
But I cannot seem to find out where that list of wrong storage locations is getting populated from!! I have checked the material master and the storage types where these materials are stored in WM. In all these places the storage location is correct. Yet in the production orders some components show the right SL and some don't..
Does anyone know what could be the reason?

Hi,
What i have understood is Open requirement has created for wrong storage location which u donot trace.
U can see the that incorrect storage location at Component Overview of Production order.
The possible area from which the issue storage location can flow.
1.Issue storage location defined for Bom components at Header Material Bom.
2. if header material has production version , check wirh issue storage location at Pv.
3. Default supply area defined at workcenter related that component.
4.stock determination Group  at MRP view.
i hope this will help u to fix your problem
Pradeep

Similar Messages

  • Fld selectn for mvmt type 261 / acct 50000000 differs for CO/PP order (011)

    Dear all,
    We are posting goods issue against order in COGI and we are getting the following error.
    "Fld selectn for mvmt type 261 / acct 50000000 differs for CO/PP order (011)".
    We checked in the following settings
    Trx - FS00- check the field status group. And in OME9 we compared the attributes in both screens are same.
    We have activated Business area.
    Request to kindly do let us were have missed out in settings other than the field settings.
    regards,
    mahesh.

    execute report RM07CUFA, it will show you were the difference is

  • Fld selectn for mvmt type 261 / acct 404000 differs for Cost center (010)

    Hi Guru's,
    When trying to Post a stock from one valuation type to other valuation type in MB11 with reference to refurbishment order i am getting
    "Fld selectn for mvmt type 261 / acct 404000 differs for Cost center (010)".
    May I know the actual problem and please help on rectifying this.
    -balaji

    Hi,
    Please Run the below Program through transaction code SE38
    RM07CUFA
    Provide Movement type 261
    Company Code
    GL code    404000
    Find out the error message, there can be conflicts between movement type Filed status and GL field status group.
    Please change the GL field status group.
    Ravi polampalli

  • Fld selectn for mvmt type 543 / acct 6190030 differs for Asset retirement

    Dear All,
    I create a Subcontracting PO and issue goods to vender against that PO.
    Suppose i issue two materials with Qty 50 Each to vender.
    again Vender gave me back 10 Qty each becoze there is only 40 Qty is ussed for that material in subcontracting Scnerio.
    i take back that material to my inventory with movement type 542 against Sub PO.
    but again when i go to MIGO, then there is two problems
    1) System still show me BOM of 50 each but vender gave me back 10 each Qty.
    and i change that manually 40 Qty for Each.
    2) while Posting MIGO, system gave me this error 
    Fld selectn for mvmt type 543 / acct 6190030 differs for Asset retirement (016)
    please help me and give me direction if i have done any thing wrong.
    Regards,
    Pardeep malik

    Hi,
    Check the field status group in the create/bank/interest TAB of G/L Account 6190030
    in T.code: FS00.
    Also Use T.code: SE38 , Enter Program RM07CUFA
    Enter the Movement type 543 & enter G/L account 6190030
    Enter the company code
    Click on execute
    & update  & save.
    Now try ur transaction.
    Regards,
    Biju K

  • Fld selectoin for mvmt type 601/acct 895000 difrs 4 cust gds mvmt(015)

    Hi all gurus
    please help me out while I am doing pgi through vl01n system trrowing an erroe stating that (fld selection for mvmt type 601/acct 895000 differs for customer goods movement (015). your kind approach will be highly regarded
    thanking you in advance
    Edited by: Csaba Szommer on Oct 20, 2011 8:25 AM

    Hi
    For mvt type 601,in OMJJ, customer field is set as optional.
    You can check this in OMJJ - mvt type 601 - field selections - Material management.
    Check in FS00 - the field status group assigned to GL account - 40005900, then open the attributes of that field selection group in OBC4, check customer field is suprresed.
    You can change either (suggest to check with FI consultant to change in field status group).
    Alternatively you can run RM07CUFA program with variants to compare these two settings and make necessary changes.
    Thanks

  • Fld selectn for mvmt type 601 / acct 40005900 differs for Customer goods mo

    pls guide the correct path
    i done delivey document but while doing PGI
    i am getting this error
    "Fld selectn for mvmt type 601 / acct 40005900 differs for Customer goods movement (015)
    Message no. M7093
    Diagnosis
    Comparison of the field selection strings from movement type 601 and G/L account 40005900 has revealed that there is an incompatible field selection combination at one or more points
    pls help me out

    Hi
    For mvt type 601,in OMJJ, customer field is set as optional.
    You can check this in OMJJ - mvt type 601 - field selections - Material management.
    Check in FS00 - the field status group assigned to GL account - 40005900, then open the attributes of that field selection group in OBC4, check customer field is suprresed.
    You can change either (suggest to check with FI consultant to change in field status group).
    Alternatively you can run RM07CUFA program with variants to compare these two settings and make necessary changes.
    Thanks

  • Fld selectn for mvmt type 561 / acct 2005999 differs for Ext. GA amount in

    Dear Experts,
    When we are doing the initial stock upload we are getting the Error as "Fld selectn for mvmt type 561 / acct 2005999 differs for Ext. GA amount in LC (023)
    Message no. M7093"
    and when we compared the Feild status for that posting at Posting Key Level, Feild Status Group Level and the movement type level it is not showing any incosistancy can any one please help
    Best Regards
    Ravi Reddy

    Hi Ravi,
    Please go through SE38 T.code and give the Program RM07CUFA and check it
    Fields should be equal to Movement types. check it..
    Regards
    Madhu I

  • Fld selection for mvmt type-561/acc399999 differs for ext GA amount in lc

    Dear pp experties
    When i am doing MB1C mvmt type 561, in repetitave manufacturing, i am facing one error message,
    the error message is (fld selection for mvmt type-561/acc 399999 differs for ext.GA amount in LC(023),I already checked g/l acc(fs00), already creted in plant 1234.
    pls explain i am very thank full in adv
    devendra (pp)

    Hi there,
    I think you have mistaken the forum.
    can you please explain how the current error is connected to CAF and/or GP?
    Regards,
    George.

  • Fld selection for mvmt type 511/ acct 520302 differes from Profit center Er

    Dear Gurus,
    I got error Fld selection for mvmt type 511/ acct 520302 differes from Profit center (042), since we have scrapped so many times with same GL, why this issue comes.
    if i do in OBC4>>>>Field status group>>>G018>>scrapping>>Additional acct assginment>>Profit center changer from suppress to opt entry. Is this error goes.
    But previous we have done scrapping, no issues, but currently happening
    Please advice me
    Thanks
    RS

    Hi,
    go to FS02 put the account 520302.then go to create/bank/interest tab .
    here double click on field status group. go into the additional accounting data here make profitcenter as optional if it is supress.
    OR
    goto SPRO >MM> Inventory mgm >movt types > select the 511 movement type.go to its field selection .
    here goto addinal accounting data and make profit cesnter as otional if it is supress
    regards,
    sujit

  • Fld selectn for mvmt type 673 / acct 407300 differs for Business Area (033)

    Hi All,
    I am implementing the Inetrcompany return process for the client.
    1) I have created a intercompany Return PO (NB doc type) .
    2)  Created a delivery against this PO.
    3) when i am posting goods issue for this Return delivery , i am getting this error "Fld selectn for mvmt type 673 / acct 407300 differs for Business Area (033)"
    Am i doing the steps correctly or i need to handle intercompany return differently?
    thanks
    Akkshaya

    hi
    it will due to the cross field selections in movement type 637 and field selection for gl acct
    any one of it have entry as required and one might not have
    go tothat acct in FS00 check the create/bank tab here see what u havein Field status group
    now go to OBC4 here for ur co co de meke business area mandetory or optional for that Field status group
    also check OMJJ for movemnt 673
    hope it help

  • Fld selectn for mvmt type 543 / acct 41281100 differs for Asset retir

    Dear Experts,
    I face an error while doing MIGO for subcontracting scenario.The error is " Fld selectn for mvmt type 543/acct 41281100 differs for Asset retir.
    I have checked in OBC4 for G/L account field for Asset retir and OMBW for movement type .I have also checked SE38 and had run the program.Still the error persisits .what may be the problem.
    Thanks & Regards
    subhash kulkarni

    Go to FS00, input the G/L Account 41281100 and execute.  There go to tab Create/bank/interest and chech whether you have maintained any value against "Field status group" and also you have checked the box for "Post automatically only".
    This should be done in consultation with your FI consultants in case the issue is in production.
    thanks
    G. Lakshmipathi

  • Fld selectn for mvmt type 543 / acct 41301100 differs for Asset retirement

    Hi all!
    While i am doing GR for a sub-contracting PO i am getting an error as below,
    "Fld selectn for mvmt type 543 / acct 41301100 differs for Asset retirement".
    What is the reason for this. I followed the proceed in performance asistant but held up there..
    How to solve this error.
    Thx in advance,
    Raj.

    Hi, Check the field selection in SA38, RM07CUFA and enter the mov and G/l account you can found red mark indication where gl account field status vary with MM field status.
    change as per your requirement.
    Enter the Movemnt type 543 & enter G/L account 41301100 Enter the compnay code
    Click on execute
    Click on the Column of G/L account for Asset requirement
    Anothe rsecreen with Field Status Group overview will be displayed.
    Click on Additional account assignments
    Change the filed Selection of Asset requirement from mandatory to Optional & save.
    Thanks & Regards,
    Kiran

  • Fld selectn for mvmt type 501 / acct 520075 differs for Vendor goods moveme

    Hi,
    When i do goodreceipt through 501 movment , I am getting the below error.
    "Fld selectn for mvmt type 501 / acct 520075 differs for Vendor goods movement (014)"
    Can you suggest , how to correct this.
    Thanks and regards
    Karthikeyan

    hi,
    use mov type 561 .
    or need to check account GL is correct or not .
    regards,
    sabs

  • Field seection for mvmt type 702/acct 233000 differs for vendor goods movem

    Hai Gurus
                 iam posting physical inventory differences in T.code MI07 for Consignment stock.it is giving error
    "field seection for mvmt type 702/acct 233000 differs for vendor goods movement (014)".
    can u pl help to resolve this
    Thanks & regards
    chandra

    hi
    T.code SE38 Program RM07CUFA,Execute
    Enter movemnt type 702, Special stock indicator P - pipeline
    Company code
    G/L account - 233000
    Execute
    now here check the mismatched field selections
    refer following
    Stock posting...
    error in MB1a
    regards
    KI

  • Fld selectn for mvmt type 561 / acct 900040 differs for Cost center (010)

    hi all
    while uploading raw material i find " Fld selectn for mvmt type 561 / acct 900040 differs for Cost center (010)" this error. please help me to solve this error.
    thanks

    Hi,
    I do not have system now, but the above error happens due to wrong Field Selection of G/L & Movement type and not matching.
    Option-1: Check Field status group in the create/bank/interest TAB for G/L in FS00 & check its assignments in OBC4 & Field Selection for status of cost center like optional/required/suppress
    Use OMJJ t.code - 561 mvt - field selection and check additional account assignment (here cost center is optional/required/suppress.)
    Option-2: Can also run the programme RM07CUFA through SE38 to update.
    Regards,
    Biju K

Maybe you are looking for