Open vi error for report generation toolkt

Originally it works fine.
Now I upgrade to win7, LV9 and office2010.
To open the old program by 8.6.1, I reinstalled LV 8.6.1 and report generation toolkit.
But still got the error as attached.
Any suggestion, thanks.
Attachments:
ss.png ‏184 KB

1. MS Office 2010 is not yet supported, since it's still just a beta. I believe there are couple of changes that Microsoft make, and it could cause a problem.
2. LabVIEW 8.6.1, and all its toolkit is not supported on Windows 7. This could cause a problkem also.
In conclusion, you should use LabVIEW 2009, Report Generation Toolkit 2009, Windows 7, and downgrade office to XP, 2003 or 2007.
More information: http://digital.ni.com/public.nsf/allkb/C9408B9F08D​711E786256F3300701D01

Similar Messages

  • Exe giving error for report generation and LV 8.6.1

    I have created and installed a labview application in a PC(windows XP) where labview is not installed.  (already included NI_Excel.lvclass)
    I have used a report(excel) generation to display the results.
    I am getting following error:
    Error Code: -2147352573
    Member not found in NI_Excel.lvclass:
    I am using MS office Excel 2007 SP1
    NI LabVIEW Run-Time Engine:8.6.1.
    Report generation toolkit version:1.1.3
    phani srikanth
    Solved!
    Go to Solution.
    Attachments:
    Error.JPG ‏10 KB

    search the ni website and a 30 day eval copy can be found. For use beyond this period you would have to buy a license (unless you have one of course)
    compatibility can be found on the following link
    http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01 
    hope it helps
    TD 
    Please remember to accept any solutions and give kudos, Thanks
    LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

  • Error in report generation-Load report failed

    I have installed crystal reports  for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
    This works fine in development and testing but when moved to production we are having issues.
    I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
    But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
    Please help.

    Hi Don,
    The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
    Does it mean that there is a problem in the connectivity?
    I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a  third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
    Is there any fix which can applied to the server to get this issue resolved?
    Cheers
    Nithya.

  • Stand alone exe errors using report generation vi's

    I have a stand alone application that uses some report generation vi's. I have added the _wordsub.llb as a support file. In the main program I have told the report generations vi's where to find the _wordsub.llb so it can load the dynamic vi's as needed. The problem is when I run the stand-alone executable I get an open refernce error for one of the dynamic vi's that says that vi is not executable. But when I reconfigure the executable and include that vi as a dymaically loaded vi in addition to the _wordsub.llb, the stand alone works error free. Any suggestions?

    It really depends on what version of office you are using. Some methods have different set of parameters or even different names, labview does not adjust them accordingly, even though the code might execute but it will fail during build process. You must reselect the methods manually in order to build the executable. Most time you need to build different executables for each office version.
    -Joe

  • LabView Exe Applicatio​n file not launch Excel applicatio​n for report generation

    Dear All,
    I created one LabVIEW application file for report generation (using Excel Template).
    While I run the program in programming mode it works well and create the report file in the specified path.
    After creation of the application file(exe), it gives the correct path of where the excel template is placed. The same path is given to New Report.vi, but it gives the error 'File Not Found'.
    Tell me, is any other configuration required for generating Excel reports? (During exe application mode)
    Give me the solution.
    Thank You
    Jegan.

    Hello,
    Most likely you are encountering a problem of stripping and/or building paths.  Probably the easiest thing to do is put a couple indicators on your front panel for the path or paths you care about, build your exe, and make sure you are really using the path you'd like.  If you always put the report at some deterministic place relative to the exe (that is, even it the exe is moved, it will go with the exe and remain in the same relative path location, then you can use the Current VIs Path funtion found in the ... File I/O -> File Constants palette as a start path (where you will want to strip at least the exe name off of course).
    I think this will bring some clarity to the issue!
    Best Regards,
    JLS
    Best,
    JLS
    Sixclear

  • BI Publisher 10.1.4.3 - To connect to AD for report generation

    Hi,
    I need to generate a report against an LDAP(Active directory) . I'm using  BIP 10.1.4.3. When i try to configure a datasource, the options present are
    1. JDBC
    2.JNDI
    3. File
    3.OLAP.
    Can any one guide on how to connect  to Active Directory in BI Publisher for report generation.
    Thanks in Advance.

    You have posted your question in the Oracle Portal forum. Please submit your question in the [url https://forums.oracle.com/forums/forum.jspa?forumID=47]Identity Management forum.
    Thanks,
    EJ

  • Open Enrollment error for US - No correct adjustment reason specified

    Hi,
    We are getting this error "Open Enrollment error for US - No correct adjustment reason specified". Please help if you know the resolution to this.
    Regards,
    Anand Jalan

    I have found the solution for this.
    Maintain the Open enrollment period dates in IMG->Personnel administartion -> Benefits ->Flexible administration->Define Administrative Parameters

  • Is ms office 2013 supported for report generation​? Error 41106

    Hi
    I have a copy of LV full development suite with the Excel and Word report generation toolkit added.
    I have recently changed to using Office 365 that includes offline versions of Excel and Word from Office '13.
    When using the report generation toolkit, I get an error 41106.
    I have reinstalled the toolkit - no effect.
    I sort of assume therefore that office 2013 is not supported?
    Any hints, tips, patches or workarounds please.
    Bill

    Bill_Shepherd wrote:
    Hi
    I have a copy of LV full development suite with the Excel and Word report generation toolkit added.
    I have recently changed to using Office 365 that includes offline versions of Excel and Word from Office '13.
    When using the report generation toolkit, I get an error 41106.
    I have reinstalled the toolkit - no effect.
    I sort of assume therefore that office 2013 is not supported?
    Any hints, tips, patches or workarounds please.
    Bill
    I've seen some issues when I upgraded to Office 2010. Note that it is possible that the route cause of your problem is totally different but in my case there was some ActiveX properties or Methods call that have been changed. I solved this issue by navigating to the property/method that caused the error, clicked on it and reselected the same property/method. You could probably find some older post that discuss that. Hope this help.
    Ben64

  • Error 7 report generation

    Good Day,
    I seem to be having a little trouble with the report generation tool.  I'm running Labview 7.1, have the MS Report Toolkit.  I have a construct that creates and formats an Excel Report.  It works fine when running it from the developement environment, but when I create an executable and run from the runtime environment, it errors right at the first stage of this sequence, at "New Report.vi".  To this VI I have an "Excel" constant tied to input "Report Type" with no other inputs.  The error that is caught is code 7 "Open VI Reference in New Report.vi->filename.vi" replacing filename with the name of my file (not to state the obvious).
    Is there a seperate runtime toolkit that needs to be installed?
    Any ideas?  Thanks a bunch.

    Hello,
    Please read the section in the User Guide for the Report Generation Toolkit on building an executable out of your VI.  There are many VIs that are called dynamically by the toolkit that must be handled in a special way (specifically, added as Dynamic VIs to your application) when you build your VI into an executable.
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Error involving Report Generation Toolkit and Labview Run Time Engine

    Developed an application using LabVIEW 6.1 and LabVIEW Report Generation Toolkit for Microsoft Office 1.0.1. From there, tried to build a shared application for use with the LabVIEW Run Time Engine. The Run Time version functions properly until "New Report.vi" is called and then an error is generated, code 7, calling out "Open VI Reference in New Report.vi" could not be found. When building the application, I did include the "NI Reports Support" in the advanced installer options. The machine used for original development and application build is running Windows XP Pro and Office XP. Any suggestions??

    I am having the exact same problem but with LV 6.1 and M/S WORD 2000. It appears that the "New Report.vi" is trying to open "C:\APP.DIR\Word_Open.vi" and "C:\APP.Dir\Word_Open_Document.vi" by reference. The "OFFICE 2000.TXT" says that "_exclsub.llb and _wordsub.llb must be added as support files when building an application or a dynamic link library with the application builder." I added them as Support Files and I copied them to the "C:\TESTER\" where the TESTER.EXE is and I still get ERROR 7 in "NEW REPORT.VI" at VI OPEN REFERENCE.
    Do I need to make a "C:\TESTER\DATA\" sub-dir and put the support files there?
    I am building on MY COMPUTER on F: Drive on a network and transporting files to the real Tester.
    I displayed my App.Property of APP.DI
    R at start up and it is C:\TESTER\ ! How would my application know that "Word_Open.vi" and "Word_Open_Document.vi" are actually inside the _wordsub.llb?
    Any ideas ?
    Greg Klocek

  • Problem for Report Generation Toolkit for excel 2000

    Hi all,
    Now I am Developing my program with Report Generation Toolkit 1.1.0 and Labview 7.1.
    In my computer I am using Excel XP, and there is not any problem. But when I build to
    a exe file, and use in a computer with Excel 2000, it didn't work.
    And I try to check the source file in this computer, I found that there any some connection
    error. And this is caused by the active X class. As I know Excel 2000 is using Microsoft Excel
    Object Library 9.0, but i cannot find it in the list of active x. So it is using Microsoft Excel Object
    Library with a very old verison. So in the property node there are missing functions, such as the
    UsedRange in _Worksheet in the Excel_Get_Range.vi. However, In VBA, I can find the 9.0 Library.
    Is it the problem of 9.0 library? How can I solve the problem? How can I upgrade the library to 10.0?
    Thanks.
    Regard,
    Ryan

    Hi Mike,
    Since my program is for all the staff in office, everyone may use it.
    I cannot call the whole office to upgrade the excel to XP.
    And I think Report Generation Toolkit is alway support Excel 2000,
    since the old version of it is not support for Excel XP.
    Regard,
    Ryan

  • Drill down Error in Report Generation

    Hi,
    I've a problem with a Report generation.
    The ERROR Message is the following one:
    Odbc driver returned an error (SQLExecDirectW).
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] Generic error. [nQSError: 27002] near <(>: syntax error [nQSError: 26012] . (HY000)
    SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Pivot xTD"."ID Report", "Pivot xTD"."Ordine Raggruppamento 1", "Pivot xTD"."Ordine Raggruppamento 2", "Pivot xTD"."Raggruppamento 1", "Pivot xTD".Valore, "Territorio"."Coda", "Territorio"."UT", DBO.FN_GET_PIVOT_LABEL_BI("Pivot xTD"."Label",TIMESTAMP ''2011-03-28 00:00:00.000'',TIMESTAMP ''2011-03-28 00:00:00.000'',"Calendario"."Max Giorno Pivot (formato data)",''Giornaliero''), EVALUATE(''DBO.FNC_GET_DATE_LABEL_BI(%1,%2,%3,%4)'' AS CHAR(500), TIMESTAMP''2011-03-28 00:00:00'', TIMESTAMP''2011-03-28 00:00:00'', Calendario."Max Giorno Pivot (formato data)", ''Giornaliero''), EVALUATE(''DBO.FN_GET_PIVOT_LABEL_BI(%1,%2,%3,%4,%5)'' AS CHAR(500), "Pivot xTD".Label, TIMESTAMP''2011-03-28 00:00:00'', TIMESTAMP''2011-03-28 00:00:00'', Calendario."Max Giorno Pivot (formato data)", ''Giornaliero''), Territorio.Coda, case "Pivot xTD"."ID KPI" when ''LAVORATO_BO_TOTALE'' THEN ''Totale'' when ''LAVORATO_BO_RECLAMI'' THEN ''di cui Reclami'' when ''LAVORATO_BO_AC'' THEN ''Di cui AC'' when ''LAVORATO_BO_CARTACEO'' THEN ''di cui Cartaceo'' when ''LAVORATO_BO_TELEFONICO'' THEN ''di cui Telefonico'' end FROM "Reportistica Predefinita"')}
    SQL Issued: SELECT "Pivot xTD"."ID Report", "Pivot xTD"."Ordine Raggruppamento 1", "Pivot xTD"."Ordine Raggruppamento 2", "Pivot xTD"."Raggruppamento 1", "Pivot xTD".Valore, "Territorio"."Coda", "Territorio"."UT", DBO.FN_GET_PIVOT_LABEL_BI("Pivot xTD"."Label",TIMESTAMP '2011-03-28 00:00:00.000',TIMESTAMP '2011-03-28 00:00:00.000',"Calendario"."Max Giorno Pivot (formato data)",'Giornaliero'), EVALUATE('DBO.FNC_GET_DATE_LABEL_BI(%1,%2,%3,%4)' AS CHAR(500), TIMESTAMP'2011-03-28 00:00:00', TIMESTAMP'2011-03-28 00:00:00', Calendario."Max Giorno Pivot (formato data)", 'Giornaliero'), EVALUATE('DBO.FN_GET_PIVOT_LABEL_BI(%1,%2,%3,%4,%5)' AS CHAR(500), "Pivot xTD".Label, TIMESTAMP'2011-03-28 00:00:00', TIMESTAMP'2011-03-28 00:00:00', Calendario."Max Giorno Pivot (formato data)", 'Giornaliero'), Territorio.Coda, case "Pivot xTD"."ID KPI" when 'LAVORATO_BO_TOTALE' THEN 'Totale' when 'LAVORATO_BO_RECLAMI' THEN 'di cui Reclami' when 'LAVORATO_BO_AC' THEN 'Di cui AC' when 'LAVORATO_BO_CARTACEO' THEN 'di cui Cartaceo' when 'LAVORATO_BO_TELEFONICO' THEN 'di cui Telefonico' end FROM "Reportistica Predefinita"
    Can someone help me?
    Thanks a lot.
    Edited by: user13313458 on 20-mag-2011 2.58
    Edited by: user13313458 on 20-mag-2011 3.01
    Edited by: user13313458 on 20-mag-2011 3.02
    Edited by: user13313458 on 20-mag-2011 3.02
    Edited by: user13313458 on 20-mag-2011 3.03
    Edited by: user13313458 on 20-mag-2011 3.05

    Thanks a lot for your answer.
    I tried to run the query in a SQL editor, and i've noticed that there's a function that lost its own parameters:
    EVALUATE('DBO.FNC_GET_DATE_LABEL_BI(%1,%2,%3,%4)' AS CHAR(500),
         TIMESTAMP'',
         TIMESTAMP'',
         Calendario."Max Giorno Pivot (formato data)",
    So i've tried to rune the function in this way:
    EVALUATE('DBO.FNC_GET_DATE_LABEL_BI(%1,%2,%3,%4)' AS CHAR(500),
         TIMESTAMP '2011-01-01 00:00:00.000',
         TIMESTAMP '2011-01-01 00:00:00.000',
         TIMESTAMP '2011-01-01 00:00:00.000',
         'string')
    but the error is the same.
    What can i do?
    Edited by: user13313458 on 23-mag-2011 3.02

  • Error 7, report generation toolkits do not work after building.

    Hallo guys:
    one problem. help!
    I tried to build my programs with application builder, unluckly builded exe application does no work well as before, i checked some similar post from this forum, and added that NIReprot.llb in my project and rebuild, the problem still takes place, my program append some text, tables, and charts into a word template with that Report Generation Toolkits, but it always gives out error 7 and 'NI_Word.lvclass:new report subVI.vi -> NI_report.lvclass:New Report.vi -> Creat New Report.vi ->...'error information.
    is there anyone can give me some clues about this annoying problem.
    thanks a lot!!!
    Solved!
    Go to Solution.

    When you say "attached all this library to my project", it is not clear whether you answered the question about including the dynamic VIs in your build specifications. See attached image. You will need to select the files in your project and set them to Always Included. Have you done this?
    Attachments:
    alwaysincluded.JPG ‏46 KB

  • Help needed for report generation using java technologies

    May i get some idea about report generation api available. some report generation tools that can be downloadble. can you please suggest how to use scheduling the printers or report generation by scheduling.

    e.g. for one of my school project which generate reconciliation report (banking project) we add in a letterheader and the rest of the information presented below.
    but there is some problem here.
    either you "catch" no. x row where the printing will be trancated then prevented it from trancated by formatting your pages such that data will not be printed in that region.

  • Using remote machines for report generation

    Since LabView does not have cross-platform openoffice support, I was looking at ways of generating reports from a LabView session (2010) running on a mac. The report generation VI contains a somewhat suggestive machine name input. Can one connect to a remote machine (which is windows XP and has microsoft word / excel installed) to generate reports from a mac running LabView ?

    m-s wrote:
    Since LabView does not have cross-platform openoffice support, I was looking at ways of generating reports from a LabView session (2010) running on a mac. The report generation VI contains a somewhat suggestive machine name input. Can one connect to a remote machine (which is windows XP and has microsoft word / excel installed) to generate reports from a mac running LabView ?
    With some work I think is is do-able.
    If the PC had an exe deployed and running that was served via VI Server the report could be run and generated on the PC when invoked from the Mac.
    So in theory yes!
    Edit:
    VI server is not required if the exe on the PC listens at a TCP/IP port and supports a protocol to accept the report "job".
    I'll watch to see (and in hopes of) a better solution form others.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for

  • Import an xml file into adobe designer field using javascript

    Adobe javascript experts ,please help me. I need to load the data from an xml file into a text field in designer using javascript and then go through each node in the loaded xml and compare that with form fields in designer and if matching fill the v

  • Table CUVV in 8.8

    Hi Experts, I want to know how this table being updated? 375     Send back to Dentist     0 378     BOX     0 378     CARTON     1 378     GRAMME     2 378     KILO     3 378     PACK     4 378     PIECE     5 391     11010300-AU-000-0000-0000     0

  • Customizing labels in Admin Console of OIM

    Hi, I had done some labels change in Advanced & Self Service console of OIM using OIMUI.jar. Now, i need to change the labels in Administration console. If I search for a user and select the user here, I can see whatever his Resources,Roles, Proxies

  • About Xcelsius

    Hi Guys, We have integrated BOXI R/3 enterprise version with SAP BI system . It's working fine. Now we want to install Xcelsius on same BOXI R/3 server . My question is will be there any problem to BO server . what all the steps i need to take care t

  • PDF plugin on Mac

    The "official" (or at least, recommended by your FAQ) PDF plugin on Mac isn't supported on FF4 (well, you can compile it to be ran on FF4, but it needs to be ran in 32 bit). Since development on this plugin has stalled, what will you do about it? Chr