Opening a TDM project in a native setup...?

I have a Logic project that was created in Logic 7 on a mac using a ProTools HD2 setup. I need to open this project on my Macbook using a NI KORE controller as soundcard. The project opens fine, but there is no sound.. The KORE controller is selected as core audio device in prefs/audio. Does anyone know how to do this?!??

Thanks, i couldn't change this in the arrange window, but I could in the environment. So now I'm one step closer. However, since all the stereo files in the TDM project are split, I end up with two tracks for each file, which in itself is no problem as the files are linked like they were on the TDM system, but Logic makes the first track a stereo and the second one a mono, and plays them both. I have to manually either mute the mono track or set it to no output. Is there a way around this? Thanks

Similar Messages

  • Unable to open the TDMS project.

    Hi All,
    I'm the midst of running a TDMS project. during the activities, after the deletion of data at receiver. try to reopen the project. It hangs.
    Any idea, have check no dump, tablespace ok and the solman has been set no archive logs mode.
    any idea.
    Regards
    Harziel

    hi sandeep,
    i;m still new in TDMS. Where should i check the logs for tdms. any how to update the db stats for that table.
    My solman is running windows /oracle. my sender & receiver running on Unix/oracle
    thanks in avdance.
    Harziel

  • How can I open a tdms file and replace a subset of data then save that change without re-writing the entire file again?

    Hi all,
    Is it possible to open a tdms file and make a small change an an array subset then save the file without having to save the whole dataset as a different file with a new name? That is to say, is there something similar to "Save" in MS Word rather than "Save As"... I only want to change a 1D array of four data points in a file of 7M data points.
    I am not sure if this make sense? Any help is apreciated.
    Thanks,
    Jack

    You can use either one, but for your application, I would use the synchronous.  It requires far less setup.  When you open the file, set both enable asynchronous and disable buffering to FALSE to enable you to use synchronous with arbitrary data sizes.
    Attached code is LabVIEW 2011.
    This account is no longer active. Contact ShadesOfGray for current posts and information.
    Attachments:
    UpdateTDMS.zip ‏20 KB

  • Opening Balances for Project Costing in R12

    Hi All,
    What are the Open transactions should be migrated as Opening Balance in Project Costing (R12) for Projects and Tasks. Here at client place cost will come from Inv, PO, AP and OTL to Project costing (R12). Can you please explain in detail (Opening Balances & Historical Cost - How to Migrate)?
    Waiting for replies...

    Hi
    Usually on implementation of Projects, people are migrating total historical costs per project.
    Depend on your current system, you may convert the historical data summarized by project, task, expenditure organization and expenditure type. There is an option to summarize costs into the latest period, just before starting the future transactions import into Projects. Otherwise, consider summarizing cost data per period, per quarter or per year.
    The summarized data may be loaded as miscellaneous expenditures into Projects.
    Be aware that for converted expenditures you should setup a Transaction Source which is costed and accounted.
    Dina

  • Final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support.  Have tried reinstalling

    final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed.  Have tried reinstalling, default settings etc
    Appreciate suggestion, working on deadline. Thanks.  

    Here is the start of the crash report:
    Process:         Final Cut Pro [20568]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCut
    Version:         10.0.1 (185673)
    Build Info:      ProEditor-185670300~1
    App Item ID:     424389933
    App External ID: 4138831
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [102]
    Date/Time:       2011-11-11 20:41:32.201 -0800
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Interval Since Last Report:          192058 sec
    Crashes Since Last Report:           14
    Per-App Interval Since Last Report:  157161 sec
    Per-App Crashes Since Last Report:   14
    Anonymous UUID:                      DD542B2F-58A0-482E-AAFA-ECADEC76F562
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
    VM Regions Near 0x280000003:
        CG shared images       00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM 
    -->
        STACK GUARD            00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL  stack guard for thread 0
    Application Specific Information:
    objc[20568]: garbage collection is OFF

  • Will iMovie HD open iMovie 08 Project?

    Based on what I've read, I can't see iMovie 08 replacing iMovie HD, but I could see it being useful in just the sort of circumstances it seems intended for -- a quickie movie that can be shared right away.
    I could also, however, see myself wanting to fine-tune a quickie project created in iMovie 08 by using iMovie HD.
    Will iMovie HD open iMovie 08 projects? If not, can anyone suggest a way to, in effect, have the best of both worlds?
    Thanks

    Projects cannot be shared between iMovie '06 and iMovie '08. '08 can import '06 projects with some documented limitations. There is no quality loss going in that direction. To go from '08 to '06, you have to export your project as a movie file. Your best choise is using the Quicktime DV Stream format, as that is the native format for iMovie '06. Then import your movie into a new project in iMovie '06. You will get one long clip in iMovie '06, will all effects, transitions, and titles rendered. There is a slight quality loss in the process, as iMovie '08 is not a DV editing application, and re-encodes your clips, even if they were in DV format originally.

  • COPA reporting with open and closed projects

    Dear All,
    I am designing a COPA solution for an infrastructure providing company using project systems and posting to/settling out of projects on a monthly basis. Projects run for long periods and continually incurr costs and earn revenue untill they are closed. The requirement is to report by common characteristics (say customer group) and separately for open and closed projects. My issue is how to separate the line items of projects where status changed to closed (having posted with the status REL previously), from the open ones, without entering the projects individually in the selections screen.
    Any ideas will be greatly appreciated.
    Thanks,
    Maddy

    Dear Satya,
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee0bbd55c811d189900000e8322d00/content.htm
    An item of a purchase requisition is only regarded as Closed if the requested order quantity has been included in a purchase order.
    You can also set an item to Closed manually. <b>This item will then not be taken into account by the materials planning and control system.</b>
    You can set the Closed indicator manually at the following points (it can later be cancelled if necessary):
    When changing a purchase requisition, on the item detail screen
    When creating a purchase order referencing a requisition, on the item detail screen of the PO
    You can still create purchase orders by referencing a requisition if this indicator has been set in the requisition concerned.
    The indicator can also be set in the case of automatic PO generation from purchase requisitions. On the initial screen of the requisition, you can specify that the requisition is to count as closed as soon as an associated purchase order has been generated, even if the complete quantity requested has not been ordered, for example (Set reqs. to "closed" indicator).
    Analyses of Purchase Requisitions:
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm (visit section under Reporting in Purchasing)
    Hope this will help.
    Regards,
    Naveen.

  • Error while opening a new project

    Hello,
         Our team has been working on RoboHelp 7 for some time now. I recently joined the team and they had asked me to work on RoboHelp 8 and give them a presentation on the same. I downloaded a trail version of RoboHelp 8 and installed it.
    Problem:
         When I open RoboHelp 8 and select Application Help or Blank Project, I start getting errors (I have tried all other options too with no luck).
    Process:
    Open RoboHelp 8
    Select "Application Help" under "Create New"
    On Clicking "Finish"
    The following errors occur
    And so on... It continues with a lot of other errors.
    Any suggestion on how to open a new project with out these errors will be very much appreciated.
    Thanks in advance
    Calcasmy.

    You wouldn't necessarily be aware of the problems when installing. Have you specifically checked with your IT that they do not store your profile on the network. That bit is important.
    Then try http://www.grainge.org/pages/authoring/installing/installing.htm and see the Problem Installations section. One link helps with installs that have failed and the other removes installations more deeply than the programs own uninstall routine. You may need to install again for RevoUninstaller to work.
    I suggest you work with IT using either of the links.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Open Captivate 6 projects with Captivate 7 error - loading video

    Hi!
    I have several projects created by Captivate 6 and now we upgrade to captivate 7.
    When I tried to open it with Captivate 7 a Loading video window appears several times, the project is opened but I cannot to do anything because these loading videos are still in process. But nothing happens.
    Can you help me?
    Thanks!
    videos format: .flv

    Hello ,
    Can you tell me where have you saved your projects ? make sure they must be opened from local computer not from any network location.
    Please open a blank project and check are you able to add any video in it .
    Can you tell me the eaxct version of Adobe Captivate 7 you are using (Go to Help > About Adobe Captivate)
    Thanks and Regards
    Himanshu Satija

  • Trouble opening Premiere Elements project in Premiere Pro

    Hi All,
    Just bought Production Premium CS6. I've been working on a project in Premiere Elements 9, and I'd like to continue working on it in the new snazzy Premiere Pro CS6. But when I try to open the project file I get the following error:
    "The project could not be loaded, it may be damaged or contain outdated elements."
    I can still open the project in PrE, though, and I can even open other PrE projects in PrPro.
    I've tried opening autosave versions, but always get the same error.
    Any thoughts on what else to try? I really hate the idea of dropping so much money on PrPro and having to continue editing in PrE.
    Thanks!
    Martin

    So long as the versions of PrE and PrPro are contemporary, the PREL (PrE Project file) should open, or Import, with some caveats:
    There are many 3rd party Effects and Transitions, that are in PrE, that do not exist in PrPro - hence their use can cause issues. An example would be the NewBlue FX Effects/Transitions.
    There are features in PrE, that do not exist in PrPro, and these can cause problems. An example would be Themes/Instant Movie.
    PrE has a tiny subset of the Sonic AuthorCore modules (a larger subset makes up the basis of Encore) used for DVD/BD authoring, and if one has done any authoring in PrE, such as Create Menus, or the application of Chapter, or Menu Markers. Those authoring aspects can cause problems.
    First, I would attempt to Import (not Open) the PREL into PrPro.
    If that does not work, go back into PrE, and check for 3rd party Effect/Transitions, and remove any. Check for Menu or Chapter Markers, or Menus, and remove those. Same for Themes, or Instant Movies - remove all. Try again.
    Now, PrE 9 and CS6 are not really contemporary. PrE 9 came out during the run of CS5 (not CS6), and PrE 10 (changes made in the program) is closer to CS5.5, and perhaps CS6. There could well be just enough difference, as to create problems there, and a PrE 9 PREL just might be far enough back, as to preclude CS6 being able to either Open, or Import it.
    Good luck,
    Hunt

  • Project Professional 2010 and pwa hangs when opening a linked project from PWA on Project Server 2010

    When I open a linked project in Project Professional 2010 from PWA, Project Professional 2010 hangs with the "Links Between Projects ..." dialog box open.  Unable to move or close the dialog box.  Unable to move or close Project Professional
    2010.  The PWA tab on internet explorere is frozen and unable to access although other tabs in IE are accessible.  End up having to reboot to close down project or force the process to end.  I suspect a hidden dialog box is the culprit maybe
    the scheduling conflict dialog box but am unable to access or switch and cannot confirm that there is another dialog box.
    Has anybody else experienced this problem?
    Thanks,
    Julie

    I have seen it hang when trying to open a project schedule even with no external links.
    Project 2013 Pro, Link to schedule is on a PWA on a Project 2007 server.
    If Project 2013 is open before clicking on the link, there is a long delay and the project schedule opens up in the web tab where the link was selected. If Project 2013 is not open, it just hangs and has to be shut down via the task manager.
    No idea why. I can create a link to the shared volume and that works OK. But if I actually try to open MS Project by clicking on the link to a .mpp file it never opens in MS Project.
    Mike

  • Error 6 occurred at TDMS Open in TDMS

    Hi,
    I have a application that is using the TDMS VI's to generate a Logfile. 
    The application ran correctly for 12 days. (Each errors, and some parameters - every hours - was correctly written to my TDMS file).
    Then, the following error occured : 
    Error 6 occurred at TDMS Open in TDMS - Write data SubVI V1.2.vi->D2XX MultiTester V1.5.vi
    Possible reason(s):
    LabVIEW:  Generic file I/O error.
    =========================
    NI-488:  I/O operation aborted.
    I join my VI that manage the TDMS file. 
    The error seems to come from the VI "TDMS OPEN". The corresponding TDMS file is effectively at the specified path, and its content is OK (all expected infos are present). The file is called LogFile_0_1.TDMS. 
    Depending on the TDMS file size, the application automatically creates a new file. I tried to force that to get a new TDMS file (assuming that the active file was corrupted or blocked). A new TDMS file was created (LogFile_0_2.TDMS.) but only the first tab (root) was created. Then the same "Error 6 " was still present, exactly like before. 
    Do you think this problem can come from Windows?
    Or does it come from my application? What is not optimal, is that this "TDMS - Write data SubVI V1.2.vi" is called about every second, and the "TDMS OPEN" function is called unconditionally (even if no modification on the TDMS file are needed).
    How can we explain that this bug appears after about 12 days only? 
    I also join you the LogFile_0_1.TDMS that I converted to an Excel file, and the LogFile_0_2.TDMS that was not correctly created.
    Thank you in advance for your support.
    Michael 
    Solved!
    Go to Solution.
    Attachments:
    LogFile_0_1.xlsx ‏560 KB

    MarcoMauri wrote:
    My guess is that you forgot to close the TDMS file and each time your VI is called a reference is created.
    It could be that after a week the maximum possible number of references was reached, and you got the error.
    Regards,
    Marco
    Marco,
    That's not just a guess, that is a very real possibility.  And lets not forget the memory leaks from not closing references.
    ALWAYS close ANY references you create.  If you open a reference to a file, make sure you close it.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Open commitments of Project PO needs to be cleared

    Hi All,
    User wants to have the Purchase Order commitments cleared.
    The issue is related to open commitments for project Purchase Order. The user needs to have the commitments cleared so she can put a final close to the charge code.
    We tried option to tick the Final Inv indicator in Purchase Order Delivery Tab, for which SAP system is giving an error u201CValuation area needs to be assigned to plantu201D. We also identified that Table related to Plant Valuation Area is not showing any value related to Plant.
    Can any one suggest and solution. This Company code is in inactive mode?
    Regards,
    Pradeep

    Hi Ahmed,
    When I am trying to save after check Deliv. Compl. check box, system is giving me an error,
    Valuation area  not defined
    Message no. ME059
    Diagnosis
    The valuation area defined for the plant is not defined in table T001K.
    Procedure
    Check the assignment plant -> valuation area in table T001W.
    How can we rectify this problem? Waiting for reply
    Regards,
    Pradeep

  • Logic crashes when trying to open a Garageband project file

    Hey guys,
    Since discovering that software instrument apple loops (SIAL) do NOT include the effects/sends when they are imported into logic, a discussion on here mentioned that when opened in Garageband, the effects are included. The suggestion was that by opening a garageband project in logic, the effects/sends would all be imported into logic from garage band.
    This worked fine for a couple of software instruments such as '80's Dance Bass Synth' but strangely every time i try to open a garageband project file in logic with any of the software instrument loops 'Classic Rock Steel' or 'Southern Rock Guitar' logic crashes trying to open it. It usually loads up until an effect such as channel eq, platinumverb, or ducker and then stops loading and freezes.
    It is really odd that it seems to be related to those guitar loops. So i was wondering if anyone has a fix, or if someone could spare a minute of their time and make a garageband project with a 'Southern Rock Guitar 2' software loop and try to open this project file in Logic - just to see if it is a problem with my logic, or if it is the same for everybody.
    Any help would be greatly appreciated. Thanks guys.
    Nick.

    Hey guys,
    Since discovering that software instrument apple loops (SIAL) do NOT include the effects/sends when they are imported into logic, a discussion on here mentioned that when opened in Garageband, the effects are included. The suggestion was that by opening a garageband project in logic, the effects/sends would all be imported into logic from garage band.
    This worked fine for a couple of software instruments such as '80's Dance Bass Synth' but strangely every time i try to open a garageband project file in logic with any of the software instrument loops 'Classic Rock Steel' or 'Southern Rock Guitar' logic crashes trying to open it. It usually loads up until an effect such as channel eq, platinumverb, or ducker and then stops loading and freezes.
    It is really odd that it seems to be related to those guitar loops. So i was wondering if anyone has a fix, or if someone could spare a minute of their time and make a garageband project with a 'Southern Rock Guitar 2' software loop and try to open this project file in Logic - just to see if it is a problem with my logic, or if it is the same for everybody.
    Any help would be greatly appreciated. Thanks guys.
    Nick.

  • AE CS6 crashes while trying to open CS5.5 project

    Just downloaded the demo of CS6, but am having a nightmare trying to open my CS5.5 project. I get the following error message
    After Effects error: crash occurred while invoking effect plug-in "Shadow/Highlight".
    I tried opening a different project, and a similar error occurs, but with a different plugin. This time it's the Paint plugin.
    After Effects error: crash occurred while invoking effect plug-in "Paint".
    Any suggestions?

    Okay.
    Using After Effects CS6 trying to open a project that was created in AE CS5.5
    Running Mac OS X 10.7.4 on a Mac Pro with an ATI Radeon HD 5870 1024 MB graphics card
    2 x 2.4 GHz Quad-Core Intel Xeon
    24 GB 1066 MHz DDR3 ECC
    Source footage is mostly DPX files, some ProRes quicktimes and PSD files as well. It's a rather large project. The project file weighs in at 328 MB
    Not running any other software. still crashes.
    I do have Flip4Mac installed... The project also references missing plug-ins. See screencap. These plugins are in the project but are not turned on...
    Thats the error.
    I disabled render frames simultaneously. I tried enabling caps lock, still crashes. One thing to note is the project pieces start showing up before it crashes, so it is loading most if not all of the project before it crashes... Anything else that might be important to figuring this out?

Maybe you are looking for