Opening an Excel file configures MSO Pro 2007

Using Win7 & MSO Pro 2007.
When I try to open an Excel file two unusual things happen after the splash window opens
1> A message box opens and says stdole32.tlb. When dismissed by clicking
[OK]...
2> A window opens and starts to configure MSO Pro 2007 which takes 20-40 seconds to complete
Taking a clue from KB 2528748 ..
3> I looked in the registry at:  HKCU\Software\Microsoft\Office\12.0\Excel\Options and
      found no NoReReg Key, so
4> I executed , in the RUN BOX..
   reg add HKCU\Software\Microsoft\Office\12.0\Excel\Options /v NoReReg /t REG_DWORD /d 1
The registry now contains the appropriate noReReg key BUT the the behavior remains unchanged.
Is this likely due to the unclear message about stdole32.tlb at
1>?
Could some one help me unravel and fix this nuisance problem?
Thanx
Arvin

Hi,
Please try the following method and check if it is helpful:
Right Click the Excel>Properties>Compatibility>Choose Run this program in compatibility mode and Run this program as administrator
Copy/paste a new stdole32.tlb from installation copy or other pc
More similar issue:
http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/stdole32tlb-file-missing/ba3e940d-d628-4334-ac89-5e8ac9878093
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28171576.html
http://andyjwilliams.co.uk/technology/vista-office-2007-installation-problems-stdole32tlb/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • After upgrade to 10.9.1 office for mac 2011 will not open most excel files.

    After upgrade to 10.9.1 office for mac will not open most excel files. The files will open in open office. I have tried re-saving as excel file, no joy.
    I have repaired permissions, no joy.
    below are the results of EtreCheck scan.
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 512 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 5 days 3:45:14
    Disk Information:
              Hitachi HTS545032B9A302 disk0 : (320.07 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 319.21 GB (64.84 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5970H 
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              org.virtualbox.kext.VBoxDrv          (4.1.2)
              org.virtualbox.kext.VBoxUSB          (4.1.2)
              com.logmein.driver.LogMeInSoundDriver          (1.0.3 - SDK 10.5)
    Startup Items:
              VirtualBox: Path: /Library/StartupItems/VirtualBox
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.logmein.logmeinblanker.plist 3rd-Party support link
              [System] com.logmein.logmeinserver.plist 3rd-Party support link
              [System] com.logmein.raupdate.plist 3rd-Party support link
              [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
              [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
              [System] com.sharpcast.xfsmond.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
              [System] com.zeobit.MacKeeper.AntiVirus.plist 3rd-Party support link
              [System] org.macosforge.xquartz.privileged_startx.plist 3rd-Party support link
    Launch Agents:
              [System] com.logmein.LMILaunchAgentFixer.plist 3rd-Party support link
              [System] com.logmein.logmeingui.plist 3rd-Party support link
              [System] com.logmein.logmeinguiagent.plist 3rd-Party support link
              [System] com.logmein.logmeinguiagentatlogin.plist 3rd-Party support link
              [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer.plist 3rd-Party support link
              [System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
              [System] org.macosforge.xquartz.startx.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] .dat0157.000 (hidden)/Users/fboyd3/Library/Application Support/Spotify/SpotifyWebHelper
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.google.keystone.agent.plist 3rd-Party support link
              [not loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist 3rd-Party support link
              [not loaded] com.spotify.webhelper.plist 3rd-Party support link
              [not loaded] com.zeobit.MacKeeper.Helper.plist 3rd-Party support link
              [not loaded] org.virtualbox.vboxwebsrv.plist 3rd-Party support link
    User Login Items:
              iTunesHelper
              GrowlHelperApp
              Alarm Clock
              Canon IJ Network Scanner Selector2
              Microsoft Database Daemon
              SugarSync Manager
              Neat
              LogMeIn
              Dropbox
              Spotify
              Spotify
              AdobeResourceSynchronizer
    Internet Plug-ins:
              LogMeInSafari64: Version: 1.0.730 3rd-Party support link
              OVSHelper: Version: 1.0 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 3rd-Party support link
              AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 3rd-Party support link
              AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 3rd-Party support link
              FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              DivXBrowserPlugin: Version: 2.1 3rd-Party support link
              LogMeIn: Version: 1.0.730 3rd-Party support link
              Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              LogMeInSafari32: Version: 1.0.730 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              AdobePDFViewer: Version: 11.0.03 - SDK 10.6 3rd-Party support link
              SharePointBrowserPlugin: Version: 14.3.4 - SDK 10.6 3rd-Party support link
              Silverlight: Version: 5.1.20125.0 - SDK 10.6 3rd-Party support link
              EPPEX Plugin: Version: 3.0.0.0 3rd-Party support link
              WidevineMediaTransformer: Version: (null) 3rd-Party support link
              JavaAppletPlugin: Version: Java 7 Update 25 Outdated! Update
    Safari Extensions:
              DivX Plus Web Player HTML5 <video>: Version: 2.1.0.900
              Open in Internet Explorer: Version: 1.0
              ClickToPlugin: Version: 2.5.3
              DivX HiQ: Version: 2.1.0.900
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
              Move-Media-Player: Version: npmnqmp 071705000010 3rd-Party support link
              WebEx64: Version: 1.0 - SDK 10.6 3rd-Party support link
    3rd Party Preference Panes:
              DivX  3rd-Party support link
              Flash Player  3rd-Party support link
              Flip4Mac WMV  3rd-Party support link
              Growl  3rd-Party support link
              Java  3rd-Party support link
    Old Applications:
              Microsoft Language Register:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              /Users/[redacted]/Library/Application Support/WebEx Folder/1326
                        Cisco WebEx Event Center:          Version: 1304.07.2811.0 - SDK 10.5 3rd-Party support link
                        convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
                        asannotation2:          Version: 1206.25.2804.0 - SDK 10.5 3rd-Party support link
              Neat ADF Scanner 2008 10_5:          Version: 1.0.0.15 - SDK 10.5 3rd-Party support link
                        /Library/Image Capture/Devices/Neat ADF Scanner 2008 10_5.app
              SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              /Users/[redacted]/Library/Application Support/WebEx Folder/1324
                        convertpdf:          Version: 1.2 - SDK 10.5 3rd-Party support link
                        Cisco WebEx Meeting Center:          Version: 1304.23.2811.0 - SDK 10.5 3rd-Party support link
                        asannotation2:          Version: 1206.25.2804.0 - SDK 10.5 3rd-Party support link
                        atmsupload:          Version: 1209.12.2806.0 - SDK 10.5 3rd-Party support link
              Amazon MP3 Downloader:          Version: INFO_PLIST_VERSION - SDK 10.4 3rd-Party support link
              /Applications/Microsoft Office 2011
                        Microsoft PowerPoint:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Excel:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Outlook:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Word:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Document Connection:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
              Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              /Applications/Microsoft Office 2011/Office
                        Microsoft Graph:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Database Utility:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Office Reminders:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Upload Center:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        My Day:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        SyncServicesAgent:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Open XML for Excel:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Alerts Daemon:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Database Daemon:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Chart Converter:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
                        Microsoft Clip Gallery:          Version: 14.3.4 - SDK 10.5 3rd-Party support link
              /Applications/iWork '09
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              /Users/[redacted]/Downloads
                        Install Spotify 7:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        Install Spotify 3:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        Install Spotify:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        Install Spotify 2:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        Install Spotify 4:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        Install Spotify 5:          Version: 1.0 - SDK 10.5 3rd-Party support link
                        Install Spotify 6:          Version: 1.0 - SDK 10.5 3rd-Party support link
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  97%          Microsoft Outlook
                  16%          Google Chrome
                   5%          WindowServer
                   3%          Finder
                   2%          EtreCheck
    Top Processes by Memory:
              180 MB          Finder
              164 MB          soffice
              156 MB          mds_stores
              147 MB          Google Chrome
              131 MB          Numbers
    Virtual Memory Information:
              928 MB          Free RAM
              2.59 GB          Active RAM
              1.22 GB          Inactive RAM
              1.57 GB          Wired RAM
              31.52 GB          Page-ins
              1.33 GB          Page-outs

    Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper (v 2.8). Earlier versions than the one released in 2012 require more extensive work to uninstall all its components.
    The effects of having actually used MacKeeper to do anything are a completely different matter. The fastest way to take an exquisitely designed and painstakingly engineered Mac and make it run like a steaming pile of dung is to install and use such ill-conceived "cleaning" or "security" products. This is just one example of a broad category of time- and money-wasters capable of causing damage that can only be rectified by reinstalling OS X, restoring from a backup, or completely erasing your system and rebuilding it from the ground up. Never install such junk on a Mac.
    If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
    Quit the MacKeeper app if it is running.
    Open your Applications folder: Using the Finder's Go menu, select Applications.
    Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
    You will be asked to authenticate (twice):
    You do not need to provide a reason for uninstalling it:
    Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
    After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.

  • Microsoft Forms and Microsoft Visual Basic while opening the Excel file

    Hello,
    I have issues with 2010 64 bit Office Pro Plus Excel. Whenever I open an Excel file (97-2003 worksheet) which has macros then I get below 2 errors in sequence.
    Please note that all macro settings are enabled and below are my system configs.
    Win 7 Ultimate 64 bit,
    MS Office Pro Plus 2010 64 bit with SP2.
    Googled all and tried but in vein and also note that I dont have any .exd files under ../forms to delete. Please help.
    Please note that for others with same system config/office versions and same 97-2003 worksheet it works so issues is only in my system.
    First Error
    Microsoft Forms
    Could not load an object because it is not available on this machine.
    Second Error
    Microsoft Visual Basic for Applications
    Compile error in hidden module:  MainUtilities2.
    This error commonly occurs when code is incompatible with the version, platform, or architecture of this application.  Click "Help" for information on how to correct this error.
    Thanks.

    Your macro's will not run in a Office 64 environment only in a 32bit environment. The 64bit environment has a whole different setup and macro's created in an earlier 32 bit environment will stop working.
    So if you want to use them in a 64 Office environment you have to rewrite the macro's.
    have a look here:
    http://msdn.microsoft.com/en-us/library/gg264421.aspx
    Maurice

  • How to Open Two Excel Files in Multiple Monitors in Windows 7

    How to open two excel files in two excel windows using multiple monitors in Windows 7.
    Currently it opens multiple files on top of each other on the same one monitor.
    I found this article in a blog it says
    "The snap feature that you are looking for will not work unless you open two instances of Excel. This is because Excel Unlike Word is not a True SDI Application. Microsoft is aware of the Issue however there is no resolution to the problem but the workaround"

    If you are working almost the entire day in front of your computer at your office with lots of Excel Sheets and Word, then probably you might be working with a
    dual monitor or may be even more than that. Studies have shown that having an additional monitor increases the productivity by 20 to 30 percent (Source: NY Times)
    But some applications like MS Office Excel, even though you open multiple files, they are all from the same instance of the application. So if you want to compare two
    Excel
    files, then you may not be able to have it in two
    separate monitors as the files are loaded using the same instance of Excel. If you move one
    Excel
    file to the other window, the other Excel files are also moved to the other window.
    So how to have two separate Excel files or other application side by side in dual monitors?
    Option A:
    In Excel 2003, go to Tools -> Options ->
    General tab.
    Make sure the option, ‘Ignore other applications’ is checked. Now all the Excel files will be opened as separate instance and you can move the Excel files individually across the monitors.
    In Excel 2007, Click the Office button ->
    Excel Options -> Advanced.
    Under General, check ‘Ignore other applications that use Dynamic Data Exchange’.
    or
    As this method forces each Excel file as a separate instance, the memory consumption will be more. If you don’t want too many memory consumption then you can open only two instances (see
    Option B) and manage wisely to view in both the monitors.
    Note: If you are having issues like Excel opens without displaying a workbook, then you may have to
    uncheck this option. (See Microsoft Help for more details on this). You can use option B in this case. I have this option checked and I have not faced any issue yet.
    Option B:
    They key here is, the application has to be loaded as separate instances. Lets say you have opened an Excel file in
    Monitor 1 and you want to open the next excel file in Monitor 2. You can usually open another instance of Excel by browsing through the
    Start Menu -> Programs -> Microsoft Office ->
    Excel. Make sure this newly opened Excel file is the last Excel file you had viewed and then double click on the Excel file that you wanted to open. This will force the Excel to
    open
    in the second instance of Excel. Now you can move these
    two excel files separately across windows or monitors.
    This may be little cumbersome way to open new instances of Excel every time. The easy solution would be to keep these links in the
    quick links near the Start button. So, every time you want to open a new instance of the application, you can just use those quick links.
    hope work thanks
    http://www.lytebyte.com/2008/05/13/how-to-open-two-excel-files-side-by-side-in-separate-monitors/

  • Can't open any Excel files.

    When I double click on an Excel icon to open a spreadsheet, Excel open to a blank page.
    Once I have Excel open, I can search for the file from within the programme and it opens fine. If I then do a "save as", and try to re-open the file from the desktop location, it still will not open.
    This has happened since installing Office 365
    What do I do now??

    Hi ErickWB,
    I agree with Michiel’s suggestion, and we can also try the methods below.
    1. Try uncheck the Ignore Other Applications that use Dynamic Data Exchange (DDE).
    Click File > Options > Advanced > General Section > Tick the option "Ignore other application that use Dynamic Data Exchange"
    http://support.microsoft.com/kb/211494/
    2. Choose Run and enter Excel.exe /regserver
    This will cause Excel to start up, re-register all of its registry keys, then quit. Now, try opening your Excel files.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Opening an Excel file takes over a minute

    Anyone else notice that it takes forever to open an Excel file? I know Numbers has to import it, but it takes over a minute on a Mac Pro?
    I really don't want to install Excel on my machine.

    Bryan,
    How large is the file? If you will be frequently opening and working with large Excel files, you may as well accept that you need Office or NeoOffice or OpenOffice on your Mac. Many of us came to Numbers to escape the grip of MS, but you have to do what makes the most sense. Remember that you can still use Numbers for non-collaborative work.
    Jerry

  • Why does TDM Importer start up when I open an Excel file in LabVIEW, and how can I stop it?

    I have a new application using LabVIEW 2012 SP1.  I open an Excel file using the Report Generation toolkit and when I do so, a small TDM Importer window pops up on top of the Excel file.  
    How can I prevent this?

    Hi Steve,
    The TDM Importer pops up because the report generated in LabVIEW is in the TDMS file format.  TDMS is a binary file that requires an importer to make sense of the binary data and translate it into an Excel spreadsheet.  As per this white paper, the appearance of the floating toolbar is expected behavior:  http://www.ni.com/white-paper/5874/en/
    To the best of my knowledge, you cannot get rid of the floating toolbar unless you uninstall the add-in, in which case you probably would not be able to open your LabVIEW-generated reports.  However, as of Excel 2007, the toolbar is embedded in the "Add-Ins" tab instead of floating on your spreadsheet.  You can see how the toolbar looks as of Excel 2007 in step 6 of this white paper:  http://www.ni.com/white-paper/5885/en/
    If there is a way to embed the toolbar in Excel 2003, it would be the exact same way you would embed any other floating customer toolbar in Excel.  In other words, I don't think this has anything to do with the fact that it's NI's add-in.  This is just the way Excel 2003 and earlier treats add-in toolbars.  Someone on these forums may well know a way to embed it (perhaps a macro?), but you may have better luck contacting Microsoft.  I'm not sure whether it's even possible for a user to embed the toolbar.
    David R
    Applications Engineer
    National Instruments

  • Opening new excel file from available Template-Urgent

    Hi Friends,
    I have the functionality like this. I have one excel template. In that i am getting two text files(header and row values) and filling it on the excel file. After that i am doing operation on it. These things i have succeded already. The problem is i am opening the excel file like this
    Process pro = Runtime.getRuntime().exec(strExcelPath+" "+"..\\std\\app\\client\\resource\\SkillReport.xlt");
    when i am opening like this it is opening the tempalte for editing in stead of getting new instance from it. Can any one help me to get a new instance in stead of opening the template itself.

    Thanks guys. I've found another way of doing the same.

  • Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app,  any help?

    Hi, i'm new using numbers, and when I try to open a excel file don't let me do it, instead appears a box whit a error and close app,  any help?

    What does the error say?
    A couple of thoughts: the file is corrupted or is password-protected. Corruption is more likely to cause Numbers to crash & Numbers cannot open password-protected Excel files. Try using one of the free Office clones & see what happens.

  • Intermittent Error 41106 Error when trying to open an Excel file.

    I am having an intermittent problem while opening an Excel file.  The problem only occurs occasionally during execution of my program.  My program has a cluster of buttons each button opens a sub VI that is part of a calibration process.  The first VI generates an EXCEL filename that is used to save all calibration data.  A template is opened, data is placed in this template, and then it is saved under the generated filename.  Most of the time this seems to work fine, but every once in a while I receive a -41106 error indicating that Microsoft EXCEL did not open.  As far as I can tell when I run each sub VI independently they work fine and no errors are generated.  Does anyone know why this might be happening?  I would appreciate any help.
    Thanks 

    What version of LabVIEW and the Report Generation Toolkit are you using?  I remember adding some code in the 1.1 version of the toolkit to attempt to avoid some Microsoft Excel latencies with opening/closing the application repeatedly, but it was by no means fool proof, since Excel sometimes takes its sweet time leaving memory when the application exits.  Without knowing any more specifics, my best suggestion is for you to add a small delay between successive operations regarding opening/closing Excel and see if that helps.  Also, if you could post a simple VI that demonstrates the behavior, that would be extra helpful.
    Oh yeah, and another suggestion would be to open one report reference at the beginning of your program, and use this reference through the whole thing...I understand that this might not be possible, though, if you're opening different worksheets throughout the course of your application running.
    Good luck,
    -D
    P.S. - For those of you reading this wondering why I would automatically assume MegaMan is using the Report Generation Toolkit, he cites error -41106, which is an error specific to this toolkit.
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • Office 2013 can't open word, excel files from the network after upgrade to 8.1

    Hello,
    Recently, I upgraded all PCs from WIN 8 to Win 8.1. After the upgrade I noticed that I can't open any word documents and excel files. Before the upgraded I have no problem opened any files. All PCs have over 500GB free space on hard drive. Other PCs that
    run Win 7 have no problem open them only the one with Win 8.1. This is what I got:
    I right click--> property and there is no unblocked. All files resided on the network server.
    Please help.
    Jimmy

    Hi Jimmy,
    Did you get any error message when you try to open an Excel file/Word document?
    If so, you can post the error message and  event log here.Also ,if you had antivirus software installed, try to disable them to test this issue.
    In addition, what happens if you add the network server location as a trusted location?
    Wind Zhang
    TechNet Community Support

  • How to open adobe reader file in adobe pro xl?

    how to open adobe reader file in adobe pro xl?Downloading, Installing, Setting Up

    Moving this discussion to the Acrobat Installation & Update Issues forum.

  • Opening an excel file from a button. square brackets in filename

    Internet explorer 6. Apex 3.1
    When I open an excel file (via a button) , it has the filename as follows:
    production_report[1].csv
    The prompt to save or open has the name as production_report.csv
    This prevents people saving the opened file as square brackets are not allowed in the file name.
    Is this an apex issue (ie a problem with the way I specify the filename) or a browser issue, and is there a solution?
    I am passing the filename in to my excel download page using the items/values settings.
    eg
    ITEM P12_FILENAME
    ITEM VALUE production_report.csv

    Yes, It works on firefox. It is only an issue with Internet Explorer.
    However our web based application has to use IE and therefore when it calls apex it is in an IE browser.
    I am really just producing a csv file, and opening it in excel. If this was fixed (or customisable in some way in IE that would help)

  • How to stop prompt while opening an excel file in new window

    hi all
    i made one table in jsf and i am having two icons corresponding to each row one for open and one for save. on the click of open i am calling web services getting the excel file and opening it but it is happening only . when i choose to open option from the prompt which comes when i click on the link. how to remove that prompt so that on click of the open it should directly open the excel file. plzzzzzzzzz hepl

    in the url of the new page that you are opening add --> &RetainAM=Y at the end.
    Following points should be useful :
    Suppose ,you have to open a new window from your page by clicking on a link or a button and after opening, when you click on any button in the parent page, if you are getting a session out error… try the following solutions:
    1.     Add retainAM=Y in the destination URI of the button or link
    2.     If you have the back button handling in your code, ensure that…
    if (!pageContext.isBackNavigationFired(true)) is written instead of
    if (!pageContext.isBackNavigationFired(false))
    3.     Also ensure that the trasaction name is exactly same in both startTransactionUnit and end TransactionUnit
    TransactionUnitHelper.startTransactionUnit(pageContext, "sameName");
    TransactionUnitHelper.endTransactionUnit(pageContext, " sameName ");

  • Opening an excel file in jsp

    how do you open an excel file in my jsp and target it to a table?

    can't it be done using the file class?
    i just want to open the excel file, that's all--
    Open means what ?
    See if this is useful
    String myDB =  "jdbc:odbc:Driver={Microsoft Excel Driver (*.xls)};DBQ=c:/book.xls;"
        + "DriverID=22;READONLY=false";
    //con=DriverManager.getConnection("jdbc:odbc:myExcel");
    con=DriverManager.getConnection(myDB,"","");
    dbmd=con.getMetaData();
    stat=con.createStatement();
    rs=stat.executeQuery("Select * from `Sheet1$`");//[Sheet1$]--
    I think it is not possible with File class. and if it is so
    then how you are going to handle the data ?

Maybe you are looking for

  • Single/ Consolidated  GR/IR entry for a PO having multiple line items

    Hi, In a PO there are couple of line items for materials of similar type and class. While making the Goods Receipt, the Accounting Document is making two no of line items for GR/IR accounts as credit and two no of inventory accounts as debit. Same is

  • Creating debit/credit memo in AP with Payables Interface

    Hello guys, I am able to create an invoice using the payables interface table AP_INVOICES_INTERFACE and running the Payables Open Interface concurrent program. My question is, is it possible to create a debit/credit memo in AP as well through the int

  • Excell chart in a word document

    Hi, How do I open an excell chart that is in a worddocument on my iPad?

  • How to suppress-urgent

    Hi, I want to in active and suppress  picking field in my delivery document what is the flow of configuration for this change.

  • Displaying header with data binded to the R/3 system

    hi I have developed an application which uses Interactive form to generate the Invoice PDF by getting data from back end system R/3. Now my problem is that the Header which I need to display contains some data binded with the back end system and that