Opening an image problem - with PSE11

Help...have been in chat room with various Adobe Tech guys...have tried all their suggestions and none have worked. CANNOT click on an image(any file type) in My Pictures and have it open directly ..WIN32 application error appears. Must go File/Open with/Picasa/click Adobe Photoshop Elemets. Also cannot go back and forth between any image programas now...used to be in Picasa, could click and open in PSE. VERY FRUSTRATING I downloaded this PSE11 to upgrade from my PSE8 in order to use my new D7000 which was not recognized by PSE11.

Hello, Nazaruda. This is the forum for Photoshop Elements, the consumer version of Photoshop. Since you have CS4, you would probably get better help in the Photoshop forum:
http://forums.adobe.com/community/photoshop/photoshop_windows
Good luck!

Similar Messages

Cannot open Raw images taken with a Nikon 5200 in photoshop cc

i am trying to open raw images taken with a Nikon 5200 in Photoshop cc but it says that camera model is not supported. I looked at the Raw plugin version. It is 7.0.0.0.3. In support it said the minimum version is 7.3. I have downloaded the DNG Converter with camera raw 7.3. But it is still say i have version 7.0.0.0.3. Anyone know what to do?

If the plug-in version is 7.something then you're running Photoshop CS6 since Photoshop CC ships with Camera Raw 8.0 out of the box. Latest version is Camera Raw 8.4.
The Nikon D5200 has been supported since Camera Raw 7.3 so you can either update CS6 to Camera Raw 7.4 (In Photoshop CS6, Help > Updates) or use Photoshop CC which supports the D5200 out of the box.

Reduce folders in Windows 7 for pictures without causeing problems with PSE11

I want to simplify my Windows 7 folders and reduce the number of the folders. Can you please advise me on the best way to do this so as not to cause problems with PSE11 finding the pictures? Thank you.

19441965 wrote:
I want to simplify my Windows 7 folders and reduce the number of the folders. Can you please advise me on the best way to do this so as not to cause problems with PSE11 finding the pictures? Thank you.
The only way to move files or folders/subfolders without causing problems, that is not creating 'missing files' is to do this from within the Organizer, not the OS (Win/Mac).
You can create folders and move pictures from the Organizer.
Note that if you are moving the files of several subfolders into a single one, you run the risk of wanting to move files with the same filename into the same folder ; your OS won't allow that. So the Organizer will rename pictures if needed.
If you want to do such a big reorganizing task, absolutely do a full backup before. There is no advantage for such a reorganizing from an Organizer point of view, but if you need it for some reason, it has to be done from within the organizer.

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns

Error-1074396120 Not an image, problem with IMAQ Learn multiple geometric patterns
Hi!
I've tried to modify the example of "multiple geometric patterns matching" , and just use two patterns, but when I run the VI this error appear and I doon't know how to solve it! , the error appears in the "IMAQ Learn multiple geometric patterns" block.
Running on:
- labview 32 bits
- windows 7 64 bits
- usb camera 2.0
Any sugestion would be helpful..... ! Regards
Attachments:
template_12.png ‏150 KB
template_11.png ‏123 KB
vision_multiple_pattern_matching.vi ‏127 KB

thanks all for your replies, the problem was on my template images, I had to give them information about the pattern matching, and I did it with NI Vision Template Editor, within Vision utilities, and I chose template with Feature Based.
Thank you again and Regards!

Having an image problem with Photoshop cs4.

Sorry if this is in the wrong place. Anyway, my problem is when i open CS4 and either open a picture or start a new image, the image has annoying black lines on it which distort anything i do, kinda like a broken touchscreen.
I have some images here to show what i mean.
http://i143.photobucket.com/albums/r130/Tsuikai/annoyingphotoshopproblem.jpg
http://i143.photobucket.com/albums/r130/Tsuikai/annoyingphotoshopproblem2.jpg
Now, i've tried updating my graphic drivers, resetting the tools and opening other image files, it's the same with anything i open, even if i start a new. I can't figure out what's wrong with it.
Anyone able to help?

Hello, Nazaruda. This is the forum for Photoshop Elements, the consumer version of Photoshop. Since you have CS4, you would probably get better help in the Photoshop forum:
http://forums.adobe.com/community/photoshop/photoshop_windows
Good luck!

Open Tiff image failed with imageio package

I'm trying to open tiff files with javax.imageio.ImageReader. When openning the image file, "bad.TIF" with the following codes, I got an error. However, I can open the image with "Windows Picture and Fax Viewer" (WPFV). After I opened/saved as File "good.TIF" with WPFX, I can open the image with the progarm. Would someone please help? Thanks.
Error position is 2
java.lang.ArrayIndexOutOfBoundsException: 2012
     at com.sun.media.imageioimpl.plugins.tiff.TIFFFaxDecompressor.nextNBits(TIFFFaxDecompressor.java:1503)
     at com.sun.media.imageioimpl.plugins.tiff.TIFFFaxDecompressor.decodeNextScanline(TIFFFaxDecompressor.java:792)
     at com.sun.media.imageioimpl.plugins.tiff.TIFFFaxDecompressor.decodeT4(TIFFFaxDecompressor.java:1040)
     at com.sun.media.imageioimpl.plugins.tiff.TIFFFaxDecompressor.decodeRaw(TIFFFaxDecompressor.java:677)
     at com.sun.media.imageio.plugins.tiff.TIFFDecompressor.decode(TIFFDecompressor.java:2514)
     at com.sun.media.imageioimpl.plugins.tiff.TIFFImageReader.decodeTile(TIFFImageReader.java:1137)
     at com.sun.media.imageioimpl.plugins.tiff.TIFFImageReader.read(TIFFImageReader.java:1417)
     at javax.imageio.ImageReader.readAll(ImageReader.java:1050)
     at com.rxamerica.image.LoadTiff.main(LoadTiff.java:35)
import java.io.File;
import java.io.IOException;
import java.util.Iterator;
import javax.imageio.IIOImage;
import javax.imageio.ImageIO;
import javax.imageio.ImageReader;
import javax.imageio.stream.ImageInputStream;
public class LoadTiff {
public static void main(String[] args)
String myDir = "./";
String testFile1 = myDir + "good.TIF";
String testFile2 = myDir + "bad.TIF";
int errorPos = 0;
ImageInputStream tiffStream = null;
ImageReader reader;
try {
reader = getReader("TIFF");
IIOImage tiffImage = null;
errorPos = 1;
File file = new File(testFile1);
tiffStream = ImageIO.createImageInputStream(file);
reader.setInput(tiffStream);
tiffImage = reader.readAll(0, reader.getDefaultReadParam());
errorPos = 2;
file = new File(testFile2);
tiffStream = ImageIO.createImageInputStream(file);
reader.setInput(tiffStream);
tiffImage = reader.readAll(0, reader.getDefaultReadParam());
catch (Exception e) {
System.out.println("Error position is " + errorPos);
e.printStackTrace();
public static ImageReader getReader(String suffix) throws IOException {
Iterator readers = ImageIO.getImageReadersBySuffix(suffix);
if (readers.hasNext())
return (ImageReader) readers.next();
else
throw new IOException("No readers for suffix: " + suffix);
}

Can you upload the bad tiff to an [image hosting site|http://www.imagehosting.com/]?
In general, when you set the input stream on a reader for a second time, it's a good idea to call reset.
errorPos = 2;
file = new File(testFile2);
tiffStream = ImageIO.createImageInputStream(file);
reader.reset(); <----- this line
reader.setInput(tiffStream);
tiffImage = reader.readAll(0, reader.getDefaultReadParam());I don't think that's the source of your problems though. You can add an IIOReadUpdateListener and a IIOReadWarningListener to the reader to see just how far it gets just before the exception is thrown. It may very well just be a badly saved tiff, or it could be a tiff image reader bug.
Edited by: Maxideon on Jan 19, 2009 7:07 PM
BTW, which version of JAI-ImageIO are you using?

Image problems with my 6D...diagonal line

Hello, my name is Lindy and I'm new to this forum. I've been having a problem with my Canon 6D which results in some of my images appearing with a dark diagonal line across the upper left hand corner. I've seen this problem with both my 100mm L lens and my 16-35mm lens. Has anyone had this problem before or have any idea of what may be wrong?
Thanks!!
Solved!
Go to Solution.

Hi Lindy. You've got a bit of "dust" on your sensor (only in your case it looks like a tiny hair).
It's easily fixed.
See page 279 of your owner's manual which describges how to clean the sensor.
I do, however, recommend that before doing an automatic cleaning cycle, you remove the lens and point it at the ground -- that way this little hair has someplace to go when it falls... other than finding itself another location inside your camera.
After cleaning, poing the camera a plain white wall (or ceiling) and snap a photo (it doesn't even have to be in focus). The dust shows up better at high f-stops (it'll be fuzzier at low f-stops).
Sometimes automatic cleaning is not enough and you have to do something further. If that's the case, then see page 283 for "manual sensor cleaning". This simply causes the camera to power down the sensor, but open the shutter (and hold it open) so that you can inspect and clean it. If you look inside, what you're REALLY seeing are the two filters in front of the sensor. The front filter is the one that vibrates (using a piezoelectric effect) to "shake" dust loose.
I use a variety of techniques... the simplest and safest is to use a simple hand-squeeze (bulb) blower such as a Giottos Rocket Blower. I recommend you not use cans of compressed air because the liquid propellant in the cans can spray out if the can is either shaken or not held perfectly level and that leaves a residue on the filter (and the only way to get that off is to wet-clean the filter). Even air-compressors spray water and oil. A hand-squeezed blower is the safest option.
If that doesn't work, I use an extremely soft small paintbrush. They actually do make brushes that plug in to release any static charge so that if something is sticking because of static cling it will hopefully release.
If that doesn't work, I use a sensor scope to inspect my sensor and get a better understanding of why it still wont come free (because generally it would have by now) and then wet-clean the sensor using Photographic Solutions brand "Sensor Swabs" and "Eclipse" cleaning solution. The solution is nearly pure methenol which means it evaporates very quickly and leaves no residue behind.
My guess is a simple manual cleaning (with camera pointing at the ground) -or- a hand-squeezed blower will likely do the trick. If you do resort to a brush, give that brush a couple of good solid whacks on the edge of a desk or table to throw off any dust that could be on the brush -- as you don't want to add dust on to the sensor as you are trying to brush that hair away.
Most "real" camera stores (stores in business primarily to sell and service camera gear -- not big box stores that also happen to sell cameras) offer sensor cleaning, but usually there's a charge associated with that. It's fairly easy to learn to clean the sensor (which is why Canon has a section in the owner's manual) and it's something photographers have to do.... just occasionally.
Tim Campbell
5D II, 5D III, 60Da

10.4.10 image problem with Firefox and Photoshop on Intel and OD AFP server

We are working on a new client image (perfect client image to deploy with Netboot) and our Intel machines, new and old, are throwing errors in CS2 Photoshop and refusing to launch Firefox when we log in to home folders from the OSXserver, local accounts run OK. The Intel Mac Pros we got last year ran Photoshop fine using last years image. Power Macs are running OK logged in on the server and local. The biggest variable is we are now running 10.4.10, the last image was 10.4.9. Anyone seen this, any thoughts, I have tried everything I can think of.
Thanks!

I haven't had any problems with 10.4 and solaris 10. At some point Apple upgraded to some version of OpenSSH that required the addition of the -Y switch to make things work well.

ITunes won't open due to problem with audio configuration

Out of the clear blue iTunes will not open any longer. I get a gray message screen that says iTunes can't open due to
an audio configuration problem. Any answers for this???

iTunes can't open due to an audio configuration problem.
That one is most commonly caused by a problem with your QuickTime. (iTunes uses QuickTime for audio and video playback.)
The following document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

Image problems with keynote dropbox

We are having massive problems with images not appearing correctly in our Keynote when saved via dropbox. Images appear swaped with other images, or at times, completely missing all together. This has completely crippled the work flow at our business and we are at all but a loss other on how we can continue to properly work in Keynote 6. What can be done to remedy this problem?

This is a MASSIVE problem. Keynote autosaves every single small change. With multiple team members on multiple locations it's virtually impossible to know if someone even does 1 tiny change in the presentation, while someone else is doing the same. The autosave makes this almost a certainty to happen.
We had to do multiple reworks this weekend, because of this. It makes working with dropbox and Keynote virtually impossible. I asked around and all Agencies I know, having the same issue.
One change on two locations, even by accident means:
- Broken images
- Broken videos
- Mixed images turning on different locaties
- Mixed videos turning on different locaties
- Keynote versioning broke.
- No dropbox versioning because of the new file format,
Only thing that can save you is a local backup.....OMG!!
It feels like a viral outbreak, and nobody is realising it yet....

JAI(Java Advanced Imaging) Problem with splitting TIFF images

Hi
I am getting problem with height when I use this program to split TIFF images
ImageDecoder decImage = ImageCodec.createImageDecoder("tiff", inStr,
null);
Then it creates RenderedImage page by page and encodes them to file:
String outFileName = "";
OutputStream outStr;
TIFFEncodeParam encParam = new TIFFEncodeParam();
encParam.setCompression(TIFFEncodeParam.COMPRESSION_PACKBITS);
for (int i=0,n=this.getPageCount(); i < n; i++)
outImage = this.decImage.decodeAsRenderedImage(i);
outFileName = "C:\\Temp\\Split" + i + ".tif";
outStr = new FileOutputStream(outFileName);
BufferedOutputStream bOutStr = new BufferedOutputStream(outStr);
encImage = ImageCodec.createImageEncoder("tiff",bOutStr,encParam);
encImage.encode(outImage);
bOutStr.flush();
bOutStr.close();
}The images are shrinking when I split . I need a solution to this problem.
Thanks for any help in advance
Sudheer.

Hi
Did you get a solution for your problem. I am also trying to split a TIFF file.
Thanks in advance
Antony

Image problem with my palm (J2ME Wireless Toolkit)

Hi,
I did a basic application. I just show an image and it works perfectly with the J2ME Wireless ToolKit.
However, when I create the package, convert it and send it on my palm, everything is ok, except the image. It won't appair.
I get an exception that the image couldn't be found, but when I use the emulator, everything is ok !!!
The image is in the "res" directory, like it was asked in the manual.
I tought that everything is encoded (text file or image file) when you create the package. If it's working with the emulator, why is it not working on my palm?

I had a same problem with my nokia 3650 in J2me the image appears but not on the phone, I think that that is a bug and fixed it this way:
when you make a jar package, unpack package with winRAR or some archive program in some temp directory and in that directory make a res directory an put the image in it, then repack theese files again including the res directory in a new jar file. It works for me. It looks that J2ME in compiling doesn't change the path, to root but leaves the res directory.

Opening D610 raw files with PSE11

Hello, I am not able to open my d610 raw files with PSE11. I need camera raw 8.3 but PSE 11 doesn't give me a way to upload it. Where can I find it? on Adobe web site I only find dngconverter and not camera raw 8.3.
Thanks for your help.
Olivier

When Adobe releases a new version of Elements they stop updating the old one. PSE12 was the current version when ACR 8.3 was released so you need PSE12 to have ACR 8.3.
Charging for new versions of PSE every year is how Adobe generates revenue to pay their employees and other expenses.

Open Create Replace problems with saving file patterns

Hello, I got a problem with open/replace/create function. Could you please clarify each function how it works? As you can see in my file, I try to save into the specified file path. The values appear in the text file but when I change some values in the data mainstream, it replaces the old value it has been. I want to have the whole data in one file till I close it and open another file for the operation.
How can I do it??
Thank you
Solved!
Go to Solution.
Attachments:
Values Measurement 1-main.vi ‏34 KB

Hi,
I can't see your VI as it is in a newer version of LabVIEW than I have, so if you want any more specific help you'll need to save the VI as a previous version. (File -> Save as previous version) I have LabView 2009.
However, I have made a quick little example you could use. You don't need to use Set File Position if you use Shift Registers, as shown in the attached picture.
David.
Attachments:
WritetoFile-simple.png ‏21 KB

Signed applet to open local file problem with IE6 / Firefox

Hello
I have a signed applet to open a local file, with this code :
try{
   URL destination=null;
   File f=new File(adresse);
   destination=f.toURL();
   AppletContext ac=applet.getAppletContext();
   ac.showDocument(destination,"_blank");
catch (MalformedURLException e)
   System.out.println(e.toString());
...It works perfectly with Netscape 7.01 and IE 5.5, but not with IE6.0 or Firefox 1.0...
(using SUN JVM 1.4.2_04), and there is no trace/error message
With a http link, it works for all browsers...
try{
   URL destination=new URL("http://my.site/mypage.htm");
   AppletContext ac=applet.getAppletContext();
   ac.showDocument(destination,"_blank");
catch (MalformedURLException e)
   System.out.println(e.toString());
...Any idea ??
Thanks

Hello again
There's something I don't undestand...
java applet code
import java.applet.*;
import java.net.*;
public class test extends Applet {
     public void init() {
          try {
               String path = "file:/C:/Temp/";
               URL destination = new URL(new URL(path) ,"test.jpg");
               System.out.println("URL is now: " + destination.getPath() );
               AppletContext ac = this.getAppletContext();
               ac.showDocument(destination, "_blank");
          } catch (Exception e) {
               e.printStackTrace();
html code
<html>
<head>
<title>test</title>
</head>
<body>
<applet CODE = "test.class" ARCHIVE = "sTest.jar" width=350 height=200></applet>
</body>
</html>
Signature
javac -classpath ".;D:\Program Files\Java\j2re1.4.2_04\lib\plugin.jar" test.java
keytool -genkey -keystore mag -keyalg rsa -alias harm -validity 3600 -keypass password -storepass password
jar cf0 test.jar *.class
jarsigner -keystore mag -storepass password -keypass password -signedjar sTest.jar test.jar harm With a debug the signature looks good in the logs (translation by google, not sure of the correct words...)
The checking of the certificate using the certificates CA root failed
Piled up method
Unstacked method
Selected user: 0
The user granted the rights of access to the code for this session only
Addition of the certificate in the storage section of the certificates of session JPI
Certificate added in the storage section of the certificates of session JPI
Recording of the certificates in the storage section of the certificates of session JPI
Certificates recorded in the storage section of the certificates of session JPI
URL is now: /C:/Temp/test.jpg
Javascript: Activated UniversalBrowserRead
Javascript: Activated UniversalJavaPermission
What are the 2 last line ?? (appears only in firefox, not in IE55...don't have another browser yet 'cause my graphic card and motherboard are out of order :-(
Why in firefox, in the javascript console, there is a "message" (again translation by google...) but everything is alright in the java console ??
Error of safety: the contents located at http://www.distantserver.com/Demo/test/test.html cannot charge of data or establish a bond towards file:///C:/Temp/test.jpg.
Thanks in advance (and sorry if I only don't understand something from your link because of my english level...)

Opening an image problem - with PSE11

Similar Messages

Maybe you are looking for