Openings at VI Automation Pune, India

VI Automation is based in pune, India.
We are one of the fastest growing channel partner of Ni Systems, Bangalore.
We are maily working on PC based Systems, Vision, PLC and SCADA.
We need LabvIEW Developers and Marketing Engineers.
Please find out the company and apportunities at VIAPL on
http://www.viapl.com/
http://www.viapl.com/careers.htm
Kaustubh
Managing Director
VI Automation (P) Limited, Pune
Mb: +91 99606 44455

Hello sir,
I have completed my M.Tech in Measurement and Instrumentation at IIT Roorkee in the year 2008.
My Dissertation topic is "Automation of Guest House Building".In my work i have used LabVIEW as Main tool for monitoring and control of various parameters.I have worked on LabVIEW around 9 Months.
I am interested to settle my career in Instrumentation field.
I have attached my resume.
Regards,
G.Santosh,
+919177423642
Attachments:
Santosh_cv.doc ‏43 KB

Similar Messages

Job Openings At Kimaya Automation, Pune

Kimaya Automation, Pune is looking for Two (2) Sr. LabVIEW Engineers
Job description:
Must Skills:
Candidate should have 1-2 years of experience in LabVIEW Should be familiar with cRIO.
Should be familiar with NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
Must be able to work on site globaly.
Ability to work independently for coding, testing, Installation & support
Should have good communication skills, presentation skills and interpersonal skills.
NI Certification exams (CLAD / CLD / CLA) Must
Added Advantage:
Immediate Joining ( 1 September 2013)
If you meet these requirements, please drop an email with your resume - [email protected]
Regards
Kaustubh

Hi sir,
Please find my attached resume.
I am working as a labview design engineer at TMCS Pvt Ltd for last 3 yeays and 6 months.
I have varied experiance on NI hardware and LabVIEW.
I am currently looking for a jb change.
Hoping for a quick responce.
Regards,
Hrishikesh Kelkar
Attachments:
Hrishikesh Kelkar.docx ‏33 KB

LabVIEW & Vision Position, Pune, India

VI Automation, Pune is looking for a LabVIEW (6+ months) and Vision (6+ months) programmer.
The right individual will be responsible for the following:
- Design and develop LabVIEW and Vision programs
- Adding to a library of reusable modules
- Be a diligent user and promoter of Source Code Control
- Assist troubleshooting HW/SW interaction
- Be an integral part of the team but work with minimal supervision.
The Job Details are as follows:
Job Title: Labview and Vision Programmer
Locations: Pune, India
Salary/Wage: Industry standard
Status: Full Time, Employee
Relevant Work Experience: 6+ Months
Career Level: Intermediate to Experienced (Non-Manager)
Education Level: Bachelor's Degree
Required
Proficiency in LabVIEW 8.X and above
Familiarity with NI Vision
Familiarity with National Instruments Hardware interfacing (NI DAQ – IMAQ etc)
Experience in Design and Implementation of Test Software including integration
Experience in ATE usage and development
Requirements generation and review experience
Experience in Taking Part in Technical Teams throughout All Phases of Project Lifecycle
Experience in Interfacing with Sub-vendors and Customers
Ability to Multitask
Comfortable Working on Various Team Sizes
Excellent Communication Skills In English Desired
Experience executing verification and validation for projects
If interested please send your resume and contact information to:
[email protected]
www.viapl.com

Hi,
My name is Dinesh; I am a B.E Graduate in
Electronics and Communication working in Labview platform
      My current profile includes
overall 18 months experience in Labview+ MATLAB.
      I have 15 Months of
experience in Labview using various National Instruments Hardware such as SCXI,
DAQ cards & software such Labview 8.2/8.5&8.6, Measurement &
Automation Studio, NI Vision Assistant, Labview Report Generating Toolkit etc.
      Please go through my resume as in attached
file and kindly revert back if my profile matches with your requirements.
     Please contact me at [email protected] or 9941537378 for further details.
Thanks
Regards,
Dinesh
Mobile: 9941537378
Mail: [email protected]
Attachments:
Dinesh Resume.doc ‏74 KB

Hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india . My phone Accidentally fall in water tub. And now is not working . For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me

hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india .
My phone Accidentally fall in water tub. And now is not working .
For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they are not ready to replace my phone .
I also tried contacting local apple employee named " RATI KALE " , but didn’t got any positive response.
I provided them apple invoice, passport, visa details, my air ticket details. but still they are not ready to help me . My phone details are as below :
Serial No:C8*******T9Y , IMEI : 01*************995
Please help me in replacing my phone.
<Personal Information Edited by Host>

Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.

PUNE:INDIA:: people trying hands on Oracle 11i apps in Pune , India

(Not very sure if this is a valid post in OTN but any way will give a try )
Are there any people who are trying to learn/share about 11i
in Pune India
Pls post in this thread
Sunil

Hi Sunil
I am in Pune, India and am trying to install Ora Apps 11i but getting error "The process tried to write to a nonexistent pipe" just before end of stage 2 (RDBMS install).
Logged this problem yesterday in this forum.
Ashfaque

Job Openings At Honeywell Automation India Ltd., Pune

Honeywell India Automation Ltd, Pune is currently looking for Sr. LabVIEW Engineers on a Permanent basis.
Job description is as follows:
Required Skills:
•Candidate should have 4+ years of experience in LabVIEW. Should be familiar with various NI toolkits and add-on modules.
•Candidate should have implemented various protocols such as RS-232, GPIB, MODBUS, Ethernet, Device net using LabVIEW language.
•Should be familiar with functional test development experience using various NI hardware modules (PCI, PXI, DAQ, cDAQ etc)
•Must be able to work with our global clients.
•Ability to work independently with our clients
•Should be good in debugging exciting code.
•Candidate should have good communication skills, presentation skills and interpersonal skills.
Niche Skills:
•Knowledge of Project Development Life Cycle
•Successfully completed various NI Certification exams (CLAD / CLD / CLA)
Added Advantage:
•Ready valid passport / VISA will be a plus point. Candidate may have to travel abroad depending on project requirements.
•Shorter joining period.
If you think you meet these requirements, please drop me an email with your resume,Current CTC, Expected CTC and Notice Period and contact information to: [email protected], [email protected]
Thanks,
Avni Vyas

TO
HR Manager
I have an enough knowledge about my core subject and skills to secure the job.
I completed B.tech in discipline of Electronics and Communication Engineering.
I completed my PG Diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN.
I trained concepts on LAB-VIEW, SCADA DCS RS-232 ,Fieldbuses And all plc programming (ab,abb,Siemens)
Please find the attached RESUME
I look forward to hearing from you soon.
Sincerely
Thanking you
DANDUPROLU YASWANTH ANIL
Attachments:
RESUME_YASWANTHANIL D.doc ‏41 KB
RESUME_YASWANTHANIL D.doc ‏41 KB

LabVIEW Developers-0-1 Yrs Experience, VI automation, Pune

VI Automation Pvt. Ltd., a Alliance Partner of National Instruments, specializes in the design and development of custom automated test, control and acquisition systems for R&D, design validation and production testing.
VIAPL is looking Electrical/Electronics/Instrumentation Engineers with LabVIEW experience 0-1 Yrs. In addition to excellent package, we also sponsor our employees for certifications and training from National Instruments.
Please visit the careers section of our website www.viapl.com for more details and send your resumes to [email protected]

Hello,
I am Shubhlaxmi
Chandrikapure working in CC Engineer Private Limited,Pune.I have total
1 year and 7 months of experience in Labview.Knowledge of PC based
Data Aquisition,Rs232 Communication.I have done 3 projects.
Currently working On "ABSOLUTE BLOCK SYSTEM" Project which is design
for railway signals.Application describes how to change aspect of
signals with the help of excel sheet through Rs232 communication which
has 104 inputs and 600 outputs.The whole track is of 40fit with 6
stations.
Attachments:
Latest Resume.doc ‏79 KB

Required a freelance Labview Developer for a small project for our company preferably from Pune, India, Maharashtra.

Hi This Is Rajesh,
We require a freelance Labview person or company preferablt from Pune Area, for a image grabing and processing project. Please contact with your credintials / resumes or earlier projects on [email protected] if you are interested.
Thanks
Rajesh N,

I completed PG diploma in INDUSTRIAL AUTOMATION AND SYSTEM DESIGN,I trained 6 months in LABVIEW.
I will attach my resume
I hope I will hear from you soon
Attachments:
YASWANTH ANIL D.pdf ‏25 KB

LabVIEW openings with Captronic System, Pune location

We have urgent openings with our organization.
Experience : 2-4yrs
Mandatory Skills:
Technically sound, Handled atleast 3 LabVIEW based project, exposure to NI HW
CLAD certification atleast.
CLD Preffered
Experience in configuring system - ( Selecting appropriate hardware, estimating man days for software, integration, installation & Commissioning)
Candidate should be comfortable in travelling.
Industries to cater - Defense, Aerospace, Automotive, Manufacturing, Nuclear.
Company: Captronic Systems.
Job Location : Pune.
Job Role: Engineer
Job type: permanent
If Interested send your updated resume to [email protected] With your current CTC, expected CTC and Notice period. or feel free to call on 09738427980

Dear Sir/ Madam,
I am writing in response to your job notification for LABVIEW
I am a B.E ECE with an aggregate of 7.73% marks.
- I have good knowledge of programming languages like C, C++, Embedded C,Assembly and Basics of LABVIEW.
- I’m compatible on working various operating systems like Linux, windows, etc.
- I have also done 6 months internship from Electro System Associates(ESA) Bangalore.
Also I have an Experience in the Field of Testing and Measuring Instruments.
I am from Electronics background .Please provide me an opportunity .
Some of my personal qualities which you may find useful for this role are:
- Ability to learn quickly coupled with innovative ideas for problem solving
- Ability to work in a team with strong communication skills
- Hardworking and sincere towards work with an ability to take directions
Please find my detailed CV for your consideration. If you need any more details, please let me know.
Thanking you for your time and looking forward to hear from you.
Sincerely
Gopinath.s
Ph:9535569115

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

How to get the macbook air by students discount in pune , maharashtra india

I want to buy macbook air 2013 128 gb i5 13 inch by student discount
please tell me how to get the discount in pune , india.

There is some information regarding this topic at Apple (india) pages.
http://www.apple.com/in/buy/
•Are Educational discounts available?
Education
To get discounts for Education, call Sales on 1800 425 4646 (toll free)
or 080 2574 4646, SMS "SALES" to 54646 or email [email protected]
Hopefully this helps you...
Good luck & happy computing!

3 yrs of Exp in Embedded test tool Development and Application Testing\LabVIEW\India

Looking forward to work for a reputed organization.
Over 3+ years of LabView 8.2/8.5 experience in design and development
of customized PC based Embedded software's, automation tool for audio
and vision validation, Audio and Telematics Validation Test Cases
design and Automation,Data acquisition and Control Systems using
LABVIEW 8.0/8.2/8.5 and NI DAQ Cards in the automotive and consumer
electronics industries.
Experience with GPIB Interface, VISA and Serial I/O Interface, Call
Library Function nodes to interface with third party and custom Dlls,
Image processing, Software Triggering, Analysis of acquired data with
mathematical algorithms, Controlling and Monitoring applications, UART
communication programming on PC side programming.
Experience in developing customized applications in areas like VB
and C, with good customer interaction. Experience automating vision
Validation tests with customized Test Sequences.
Ability to maintain large LabVIEW applications (> 250 Sub-VI's)
Ability to Write programs and applications to support our measurement and control hardware.
Presently working in an MNC Company.
CLA 2014
CCVID 2014
Attachments:
Puneet.Kapoor.doc ‏78 KB

If your profile matches with requirement and willing to work in Pune(India), then send your resume to [email protected]
Regards,
Rajendra Gaikwad

IBook G4 14.1 Keyboard shipping to India

Hi All,
I need to replace my iBook G4 14.1 keyboard (not under warranty or AppleCare) since almost all the keys were meticulously pulled out by my 2.5 yrs old son (i still wonder how he did it with such patience).
However iam at present in Pune, India and the Apple Support center here says the price is twice of the original USD price.
Where on Web can i purchase a keyboard and ship it to India safely?
Amazon's BrilliantStore provides but they shop standard (meaning not FedEx).
Any other web stores you recommend that ship on FedEx Air Freight/UPS 2-day Air?
Thanks
CP

Well, that's such a nice story about how the keys were removed from the
keyboard of your iBookG4 14" computer! I'm wondering if you have all of
those parts still, and if so, did you see about getting an estimate of how
much you'd be charged to put the old keys and spring bars back on the board?
For any missing ones, they can get the parts; this may add up however.
There are smaller companies who specialize in the US (and elsewhere) in
only repairing iBook, PowerBook and MacBook portable Apple computers.
Some of these will not ship outside of the US and Canada; and with some
good reason in some cases where intent to defraud was involved. That
said, you could try emailing some companies listed in the Apple support
service search page(s) in Europe who would have access to an English
(UK/US/AU) keyboard for your machine. Also, you could contact some
of the smaller but excellent companies to state your situation and see if
they are in a position to do business with you (and if you can provide a
form of satisfactory payment) and if the shipping would be a deal breaker
you may be better off doing business with a company in India. The
air and second-day shipping can be very costly. You'd pay this; or you'd
be waiting a long time for delivery. The US Postal Service does offer
Global delivery services, however. If a reseller would use them.
To pay an extreme mark-up over retail in US dollars of double seems
out of line. Refurbished or remanufactured boards should be available
for a used computer for less than a new one cost. Figure $100 or so for
a keyboard; unless you do an online auction and try your luck with a
seller who has a "buy now" link to a daily price online store, not auction.
I see in the US wegenermedia.com has listings for iBookG4 keyboards.
I have no specific suggestions, and hope you can find a reasonable
local supplier of service and parts; oh, there is a DIY support page
for replacing the keyboard in Apple Support online. The keyboard info
also applies to some extent to those upgrading the RAM slot beneath
the keyboard; that's one step short of replacing the keyboard.
Best of luck! [In the interrim, are you using an external USB keyboard?]

SAP Certification from Pune.

Hi Experts,
I've SAP domain experience of about 6 years in MM module and wish to enroll for SAP Certification course. Can I know which of these institutes (Genovate or Delphi Computech) from Pune - India are best from both training as well as placement point of view. Interested in Faculty training program.
Also need to know if my academic qualification will hamper my placements after course completion as I'm Diploma Holder in Electrical Engg.
Thanks in advance
Regards,
Mohsin

Hi,
Have you already worked on SAP as a enduser / coreuser ? or you just want to do the certification to come in SAP ?
Because if you already working in SAP with any of above role then it can make big difference in matter of Salary & Position if you want to switch to other company or if you just have domain experience and want to do SAP Certification then don't depend on any job assistant or job guarantee program just focus on study and clear the certification because you are good at your domain so you can do better at SAP as well but go for faculty program only.
You can consider doing at Genovate because they have both Instructor as well as online based program and having good experience then any other certified institute in Pune.
Thanks,
Saleem

Remote office in India

I am currently working with a consulting company in India on setting up a new office in Pune India and I am running into some issues with the local rules and regulations in regard to where we can and can not terminate PSTN. The consultanting company is saying that we can not terminate PSTN to our router and that we have to have two phones on each desk (one IP phone for internal calls and the other phone is for PSTN calls). This is my first remote office outside of North America and don't know much about the local laws in India.
has anybody had any experience in India ?
Any response will be highly appreciated !
Danny

Danny, this may help.
http://www.cisco.com/web/about/ciscoitatwork/case_studies/ipcommunications_dl10.html
Sankar
PS: please remember to rate posts@!

Openings at VI Automation Pune, India

Similar Messages

Maybe you are looking for