Operating System on MSI GT 70 0ND - Windows 8 32 bit??

Greetings!
I'm new on the forum so I hope I didn't mess with the forum section...
However as in subject I'm here seeking some information about the OS installed on the Laptop I own:
due to the hardware configuration (i7 processor and 12 Gb Ram) I assumed it should have a 64bit operating system (win8 or win7),
however I bought an MSI GT 70 0ND-444 on May 2013 and once I turned it on I read with horror that it has Windows 8 32 bit... Is it there for some unknown purpose or was it just a simple mistake? In this last case what should I do to solve this annoying problem?
I already tried to contact MSI Support, but no one answered my call :(
Thanks for your help

It should be Windows 8 64 bit.....
That's very strange. I would contact MSI Support via email.
If that doesn't work, I'd return it for a new one. I'm not sure why they would put 32-bit onto it instead of 64 bit though. That doesn't make any sense.

Similar Messages

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7.

How do I transfer all my Firefox saved passwords to my new hard drive and operating system? Going from xp to windows 7. I have the old hard drive hooked up as drive f. Can I copy and paste from old drive directory to new drive directory?

You need to copy 2 files, key3.db and signons.sqlite, from the old [[profiles|profile folder]] to the profile folder on the new computer.

MSI GT70-0NC Notebook Windows 8 64-bit driver support?

Is there any MSI GT70-0NC Notebook Windows 8 64-bit driver support out yet?

Quote from: 3dfuzion on 25-August-12, 02:47:30
Still looking for the following driver, PC Simple Communications Controller? Any suggestions?
It's Intel Management Engine, but i don't see Win8 driver for it yet, so you have to wait for this.
Dunno if driver from win7 can works. But better don't try it as a mess can occur

HT1420 I recently got a new operating system on my two-year old windows computer, but itunes says that I need to authorize my computer and I already have authorized five computers. I think I should deauthorize all but does that deauthorize my ipad and ip

I recently had a new operating system installed on my two-year old windows computer. iTunes wants me to authorize my computer (again) and then says that I already have five computers authorized. Should I deauthorize all? Would that affect my iPad and iPhone? I may have old, non-functioning computers that are still authorized and should be removed.

Your past purchases are not on the computer. By choosing download all, those purchases will download to the computer.
Once authorized to your iTunes account you can control the computer.
When syncing the iPad the first time you will get the warning " this iPad is synced with another computer, syncing will erase all contents and replace with the contents of this computer"
Say yes, this is what you wan to do.

Adding a Linux Operating System To the HP computeers with Windows 8.1

In Feb this year, I purchased an HP Envy 700-216 computer which came with Windows 8.1 installed. As everyone is now finally realizing, even Microsoft, Windows 8 and 8.1 sucks and is shortly going to be replaced and made obsolete!! I knew this when I purchased the computer, but no one could tell me how to add a Linux operating system to it, including the technicians at Ofice depot and the ones at HP support. We could get the HDD partitioned, but the BIOS always reset when the computer was rebooted. .
I finally figured it out on my own which required quite a bit of research. This information ought to be available via HP support (It was not!!!).
Briefly, I had to go into the BIOS and then download my Linux distro of choice (Linux Mint Debian Edition) which provides a very easy to operate partitioning system. I allowed only 500 Gigs of space for the Windows OS leaving the rest of the 2 TiB drive for my Linux Distro. . Then I downloaded and installed reFind, a freebie which allows the easy selection and setting of the preferred operating system.
If anyone else would like to know how to do this, please contact me and I'll try to walk you through it.
H.R. Parker

Never mind, I think I hacked up my own solution to the question:
USE [VirtualManagerDB]
GO
INSERT INTO [dbo].[tbl_IL_OS]
([OSId]
,[Name]
,[Description]
,[Architecture]
,[OSFlags]
,[VMWareGuestId]
,[OSType])
VALUES
('EBAB54C0-A9FA-4A3F-A21C-94775B96A6E5' /* Generate UUID */
,'Debian GNU/Linux 6 (64-bit)' /* Limited to 64 Chars */
,'Debian GNU/Linux 6 (64-bit)' /* Longer description of Linux Distro */
,'amd64' /* Use x86 for i386, amd64 for x86_64 */
,'28' /* This remains constant */
,'otherLinux64Guest' /* This is meant for VMware, go lookup the VMX spec files for this value */
,'1') /* Leave this at one, that's what the other OSes looked like */
GO
All posted advice may not be all that accurate. As always, test it in a lab before you try my advice! Best of all, the documentation is your friend.

Hi, I have an issue with my Mac Book Pro 15 Inch Mid 2010. I have installed Windows 8.1 operating system during week end and only windows is opening when I log in the mac. I don't know how to switch back to apple OS. Can some one please help?

Windows 8.1 installed on my Mac and now I am not able to open Apple OS. Mac is opening straight windows with out an option to open Apple OS. My Mac is running on the latest Yosemite OS.

Please also see Boot Camp: Set the default operating system.

Can I Deploy Operating System in Client Machine by using Windows Intune

I want to know can operating system like windows 8.1 can be deployed by windows intune in client computer. and if it is possible what are the steps i have to perform

Unfortunately Intune currently doesn't provide Operating System Deployment functionality.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

** Lenovo Active Protection System V1.0.0.21 Causing Windows 7 64-bit to randomly lock up **

Hi everyone,
We supplied 4 x Lenovo ThinkCentre M93P Tiny Desktops (Model: 10AB003SAU) to a business customer earlier in the year.
They are all running Windows 7 64-bit with 500GB 7000RPM SATA drives.
Late last week to early this week (approx 17 April 2015 to 20 April 2015) an update came through Lenovo System Update for Lenovo Active System Protection V1.0.0.21 which the customer installed on all four of their systems.
Since then, all four systems have been hanging & locking up during use & then require a hard reset for the systems to be usable again until the problem reoccurs next time then the same thing over & over.
I spent a heap of time going over the systems trying to work out the cause of this issue which has cost me an absolute fortune in lost productivity & lost revenue.
It also lost the customer a lot of time & renenue due to the systems being problematic over a number of days.
Thanks very much Lenovo! Won't get any of that time or lost labour back!
Customer is furious with both us & Lenovo over this matter, we will likely lose future business due to this.
Hoping this may save someone else a major headache if they see this post early enough as I assume problem would be relatively widespread if people are using Lenovo Update.
If anyone else has or had this issue recently then please comment.
Very disappointed with this problem due to an update which appears to be not fully tested!
I wonder how likely it will be that we will continue to supply Lenovo systems to other customers after this in the future......

Thanks very much for keeping this issue alive.
Let me restate the issue:
We have a AIR 2.0.4.13090 sidecar application. Installing the application for the very first time seems to work. Any uninstall or update after that runs into issues on the problematic Windows 7 64 bit machine. The installer logs all point the finger to Windows Installer having problems writing to the temp directory.
We've gone through many, many things trying to resolve this, including resetting administrative access to the temp directory and flushing the temp directory out entirely. I'm reporting this news secondhand, so it's not possible for me to directly relate the exact measures taken, step-by-step. The ONLY thing that reliably worked for running and installing updates on this AIR application was the following:
1) Create a new administrative level user.
2) Log in with that user.
3) Disable firewalls.
4) Run the updater.
5) Log back in as normal user, delete temporary user.
if the user account created in step 1 is not deleted in step 5 and is used to attempt a further update or uninstall, it will fail. This seems to tell me that AIR is able to utilize the temp folder via Windows Installer correctly only once. After that, it dirties this directory somehow and is unable to use/write to it, and subsequent uninstalls/updates fail with error 0.
Again, the failure all show msi issues writing to the temp directory. They result in an "Error 0" alert dialog in AIR.

Weblogic 11g Operating System Tuning (Linux Tuning Parameters and Windows)

Hello,
Linux and Windows systems the following parameters and parameter should be the windows.
Linux
/sbin/ifconfig lo mtu
kernel.msgmni
kernel.sem
fs.file-max
kernel.shmmax
net.ipv4.tcp_max_syn_backlog
Windows ?

WLS Performance and Tuning Guide at http://docs.oracle.com/cd/E21764_01/web.1111/e13814/toc.htm - this has a section on OS tuning......

How do I install firefox on a desktop without internet with a different operating system to my laptop (XP to Windows 7)?

I have a Windows 7 desktop where the internet is working but internet explorer will not work so I need to install firefox. I have tried downloading it to my external hard drive via my Windows XP laptop but cannot get it to install on my desktop.

Download the Firefox installer for Windows and save that file to an USB stick (or CD/DVD) and copy that file to the other computer.
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html

Operating system. We have Premier Pro CS6 and 32-bit Windows 7. It will not install

Dell Laptop Latitude 6420
Windows 7 Professional
8GB Ram
A user in Public Relations needs to use Adobe Premier Pro CS6. However when we tried to install it the program is grayed out and has a caution icon. If I hover over it there is a message that says it prefers 64-bit. Prefers does not mean will not work in my opinion. However it will not install.
I read that Premier Pro is 64-bit only on another web site. Is this true? There has to be a solution.
On the Adobe site I saw that installing CS4 Premier was the work around but you have to purchase a license key. We have already purchased Premier Pro and do not have money in the budget to purchase an older product when this one should work.
Please help. I am under a lot of pressure to resolve this
James

Premiere Pro CS6 is 64 bit software and will only install on a 64 bit computer. There is no way around that.
64-bit Windows required | After Effects and Premiere Pro CS5.5 and CS6

What is the best way to get iTunes running on my Windows 7 64 bit system without installing it on my Windows 7 64 bit system?

I had iTunes installed on XP before upgrading my system and with all the install and uninstall issues I don't want to go through the same thing with Windows 7.
So, I'm looking for a way to get iTunes running on my system without installing it (like maybe in a Virtual OS on VirtualBox or VMWare.)
Something that I can easily restore and/or repair (Windows 7 Restore Points/backup options are not viable because they restore EVERYTHING to the state they were in when they were created.)
TYIA
Any suggestions will help as to the best way of doing this.

LOL Yeah, right, that's very funny...
I did that on XP so I know better now!
Here is just 1 example of many:
On XP the uninstall wouldn't work so I coudn't upgrade iTunes. In order to fix this without Re-Installing XP, I had to delete iTunes and then manually remove it from the registry and from Add/Remove programs before I could Install the new version. Eventualy it did work after 1 and a half days of repairs...
I'm not going through the same type of problems on Windows 7 that just simply waste my time!

Script Issue for Windows 2012 R2 or 2012 Operating Systems

I have this login script that works on older operating systems but fails to run under Window 2012 R2 for users when the login; its setup as a active directory domain user logon policy: Im not much with scripts ..any help you could provide would be great
Option Explicit
Dim objFSO, objFolder, strDirectory, WshS, WSHSell, strDriveLetter, intRunError, objShell, strUser
Dim objNetwork, usrProfile, strProfilepath, usrName
Set WshS = WScript.CreateObject("WScript.Shell")
'Expand Environment
'Create const's to spare time and place
usrProfile = WshS.ExpandEnvironmentStrings("%UserProfile%")
usrName = WshS.ExpandEnvironmentStrings("%UserName%")
' Message to prove my string contains the path to my profile
strProfilepath = usrProfile
' CREATE FOLDERS ON USER SHARE IF IT DOES NOT EXIST AND ASSIGN RIGHTS
strDirectory = "\\hadfs1.pmhadley.com\users\" & usrName
' Create folder in share.
Set objFSO = CreateObject("Scripting.FileSystemObject")
If Not objFSO.FolderExists(strDirectory) Then
Set objFolder = objFSO.CreateFolder(strDirectory)
' Grant permissions to user in the folder.
Set objShell = CreateObject("Wscript.Shell")
intRunError = objShell.Run("%COMSPEC% /c Echo Y| cacls " & strDirectory & " /t /c /g " & usrName & ":C ""Domain Admins"":F", 2, True)
strDriveLetter = "U:"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.MapNetworkDrive strDriveLetter, strDirectory
ELSE IF objFSO.FolderExists(strDirectory) Then
strDriveLetter = "U:"
Set objNetwork = CreateObject("WScript.Network")
objNetwork.MapNetworkDrive strDriveLetter, strDirectory
END IF
END IF
It works if I run the script on the server from command prompt; but Remote Desktop sessions dont show the mapping created

Hi,
Get rid of the script and set up your user's home folder like so:
https://support.microsoft.com/en-us/kb/320043/
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Operating System on MSI GT 70 0ND - Windows 8 32 bit??

Similar Messages

Maybe you are looking for