Operation ' Change Attribute TSTATE ' could not be carried out for Request

hi,
i am unable to delete the request Id  from  DSO. and when i checked that, it says request is partially activated(error occured during the activation)
and when i checked the logs i got the following error messages:
Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '      361'
i even thought it was BASIS issue but it was not.
due to this error the process chain is failing daily
kindly help
regards
laksh

hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh

Similar Messages

  • Operation ' Change Attribute TSTATE ' could not be carried out

    Hi All,
    When I attempt to compress an infocube I get the following error messages:
    @5C\QError@     Operation ' Change Attribute TSTATE ' could not be carried out for Request 1114486
    @5C\QError@     Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '255'
    I checked the request 1114486 in infocube and saw that its status is green however the overall status in the load monitor was "deleted".
    How can I fix the problem with this request ?
    It is a very old request and it was already uploaded to several other targets.
    Thanks in advance..
    Berna

    hi,
    It can be due to large data volume which might require more system resources then usual, see if there is any dump related to this in ST22, Also check whether any request is currently running on cubefor data  loaded to cubeor getting load to further targets
    try compression for less requests say 3 or 4, see if it works or not
    hope it helps
    regards
    laksh

  • Operation ' Modify attribute TSTATE ' could not be carried out for Petition

    Hi Experts, when try compress a infocube appear this error
    Operation ' Modify attribute TSTATE ' could not be carried out for Petition xxxx
    The petition status is green.
    Any idea?
    Enrique.

    hi arvind,
    i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
    but the problem is still there
    regards
    Laksh

  • PAYMENT PROPOSAL COULD NOT BE CARRIED OUT

    I did payment run program for one vendor F110 i have 3 invoice. within this invoice one invoice i did payment block at the time of payment proposal in F110 , the remaining two i cleared and i got all result after some days according to the next payment run date i am trying to do payment run F110, At the time schedule proposal the error system showing "PAYMENT PROPOSAL COULD NOT BE CARRIED OUT". Now i need clear that invoice wht i do through F110.....
    Moderator: Please, use proper forum and don't post in CAPITAL letters

    Hi,
    Please go to Su01 enter your user ID click on  default Tab and in output Device field please enter Output device and then re-run the proposal again.
    Hope it helps.
    Br,Vivek

  • F110 - Message Payment proposal could not be carried out

    Hi All,
    Need help..
    In the F110 Payment proposal when executed is showingh error
    Payment proposal could not be carried out.
    The log says
    " Overlap with payment run 25.02.2009 DOREE     .... the execution of the payment program is terminated     .
    I checked the payment proposal for 26.02.2009 and for that no parameters have been entered and it shows status as " No parameters entered as yet ".
    But when I went to menu path , there is no option to delete this run.
    How do I getaway with this previous run which has problems..?
    Regards,
    Jaya

    Hi ,
    table "reguh" doesn't have any entries pertaining to this payment proposal.
    It is just that parameters are entered and proposal is being run.
    proposals are not yet created. I believe in the process it is hitting an error and then coming out saying
    proposal canot be carried out.
    Tried the previous solution by having the additional log parameters and all.
    But still log only shows :
    Log for proposal run for payment on 26.03.2009, identification DORE
    Overlap with payment run 25.02.2009 DOREE                         
    ... the execution of the payment program is terminated            
    End of log                                                        
    How to delete this payment run 25.02.2009 DOREE                         
    thanx
    Jaya

  • Paymen Proposal Could Not Be Carried Out

    Hi to all
    I am posting an expenditure transaction by using the t code RVND for yourself cheque creation with out vendor creation  and one entry is generating in background.
    the enry is
    Expense a/c                    DR
    clearing a/c for payment CR
    Then after i am running Payment Program.At that time i am getting the message as "Payment proposal could not be carried out"
    Can you help me.
    Thanks&Regards
    Raja

    Hi,
    F110 is meant fro the payments we are supposed to make if we know who the vendors is, otherwise to whom will the system pay money, how will the system under stand to whom it should be paid, more over all the credit purchases we have made from the vendors  or advance paynments from us to the vendors will be processed .
    Clearing account is not the payment made through bank, hence it is showing you the errors.
    Thanks,
    Shilpa.
    Edited by: ashilpa54 on Jan 12, 2011 4:55 AM

  • Results recording could not be carried out

    Hi all ,
    You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported .
    where can i find the setting in the material master so that i can make result recording .
    thanks
    ksr

    Hi
    Go to mm02>Qm view->sleect inspection type--->click on check char & Inpsect with task list
    then result recording from next lot will be possible
    Regards
    Sujit

  • TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

    Hi All,
    We have snapshot replication . Job is failing in between due to below error.
    Error messages:
    The process could not connect to Subscriber 'XX:SD'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20084)
    Get help: http://help/MSSQL_REPL20084
    TCP Provider: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. (Source: MSSQLServer, Error number: 10055)
    Get help: http://help/10055
    A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information
    see SQL Server Books Online. (Source: MSSQLServer, Error number: 10055)
    Get help: http://help/10055
    Login timeout expired (Source: MSSQLServer, Error number: HYT00)
    Get help: http://help/HYT00
    Please suggest

    Hi Khushi,
    According to your description, your snapshot replication job fails and you come across the error related to TCP Provider. Based on my research, the issue could occur as the following two situations.
    1. OS runs out of memory for TCP buffers. When people use the two switch: the /PAE switch in the c:\boot.ini file and the /3gb switch in the boot.ini file. If the applications require many OS resources, such as by opening many TCP connections, this can cause
    the OS to run out of memory for resources like TCP buffers.
    2.OS runs out of available TCP “ephemeral” ports. When the client machine is opening many TCP connections and is running Windows Server 2003, Windows XP, or any earlier version of Windows, it may run out of TCP “ephemeral” ports.
    To work around the issue, please follow the two solutions as below.
    1.Remove the /3gb switch from c:\boot.ini. The root problem in this case is memory pressure on the OS, so removing the /3gb switch will give more memory to the OS and will alleviate this problem.
    2.Make more ephemeral ports available following the steps in the article:
    http://support.microsoft.com/kb/196271
    For more information about the process, please refer to the article:
    http://blogs.msdn.com/b/sql_protocols/archive/2009/03/09/understanding-the-error-an-operation-on-a-socket-could-not-be-performed-because-the-system-lacked-sufficient-buffer-space-or-because-a-queue-was-full.aspx
    Regards,
    Michelle Li

  • Could not find binding output for operation getMessage

    Hi,
    I am getting a error while involking a service which is implemented using Axis2.
    The error is "[email protected]1 : Could not find binding output for operation getMessage".
    Please help me in solving the problem. The WSDL of the service looks like this...
    <wsdl:definitions xmlns:axis2="http://ws.fs.com" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:ns0="http://ws.fs.com/xsd" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:ns1="http://org.apache.axis2/xsd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://ws.fs.com">
    <wsdl:documentation>GetMessageService</wsdl:documentation><wsdl:types><xs:schema xmlns:ns="http://ws.fs.com/xsd" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://ws.fs.com/xsd">
    <xs:element name="getMessage">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="param0" nillable="true" type="xs:string" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    <xs:element name="getMessageResponse">
    <xs:complexType>
    <xs:sequence>
    <xs:element name="return" nillable="true" type="xs:string" />
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:schema></wsdl:types><wsdl:message name="getMessageMessage"><wsdl:part name="part1" element="ns0:getMessage" /></wsdl:message><wsdl:message name="getMessageResponse"><wsdl:part name="part1" element="ns0:getMessageResponse" /></wsdl:message><wsdl:portType name="GetMessageServicePortType"><wsdl:operation name="getMessage"><wsdl:input xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" message="axis2:getMessageMessage" wsaw:Action="urn:getMessage" /><wsdl:output message="axis2:getMessageResponse" /></wsdl:operation></wsdl:portType><wsdl:binding name="GetMessageServiceSOAP11Binding" type="axis2:GetMessageServicePortType"><soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" /><wsdl:operation name="getMessage"><soap:operation soapAction="urn:getMessage" style="document" /><wsdl:input><soap:body use="literal" /></wsdl:input><wsdl:output><soap:body use="literal" /></wsdl:output></wsdl:operation></wsdl:binding><wsdl:binding name="GetMessageServiceSOAP12Binding" type="axis2:GetMessageServicePortType"><soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" /><wsdl:operation name="getMessage"><soap12:operation soapAction="urn:getMessage" style="document" /><wsdl:input><soap12:body use="literal" /></wsdl:input><wsdl:output><soap12:body use="literal" /></wsdl:output></wsdl:operation></wsdl:binding><wsdl:binding name="GetMessageServiceHttpBinding" type="axis2:GetMessageServicePortType"><http:binding verb="POST" /><wsdl:operation name="getMessage"><http:operation location="getMessage" /><wsdl:input><mime:content type="text/xml" /></wsdl:input><wsdl:output><mime:content type="text/xml" /></wsdl:output></wsdl:operation></wsdl:binding><wsdl:service name="GetMessageService"><wsdl:port name="GetMessageServiceSOAP11port_http" binding="axis2:GetMessageServiceSOAP11Binding"><soap:address location="http://192.168.74.248:8080/axis2/services/GetMessageService" /></wsdl:port><wsdl:port name="GetMessageServiceSOAP12port_http" binding="axis2:GetMessageServiceSOAP12Binding"><soap12:address location="http://192.168.74.248:8080/axis2/services/GetMessageService" /></wsdl:port><wsdl:port name="GetMessageServiceHttpport" binding="axis2:GetMessageServiceHttpBinding"><http:address location="http://192.168.74.248:8080/axis2/services/GetMessageService" /></wsdl:port></wsdl:service></wsdl:definitions>
    Thanks in advance.
    Kiran

    Im having the exact same problem.
    Has anyone found out how to fix this? Ive removed any extra soap bindings generated by axis2 and fixed a few problems with the wsdl but to no avail.
    Any ideas?
    Thanks in advance,
    Ian Harrigan

  • Could not find binding output for operation ...

    Hi all !!!
    I have a big problem:
    [email protected]5 : Could not find binding output for operation getScore
    I invoke a web service called IPODShopService from my process BPEL.
    this is the WSDL:
    wsdl:definitions targetNamespace="http://service.integration.ipodshop.it">
    <wsdl:documentation>
              Please Type your service description here
         </wsdl:documentation>

         <wsdl:types>

         <xs:schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://service.integration.ipodshop.it/xsd">

         <xs:element name="getScore">

         <xs:complexType>

         <xs:sequence>
    <xs:element name="nome" nillable="true" type="xs:string"/>
    <xs:element name="cognome" nillable="true" type="xs:string"/>
    <xs:element name="email" nillable="true" type="xs:string"/>
    </xs:sequence>
    </xs:complexType>
    </xs:element>

         <xs:element name="getScoreResponse">

         <xs:complexType>

         <xs:sequence>
    <xs:element name="return" nillable="true" type="xs:int"/>
    </xs:sequence>
    </xs:complexType>
    </xs:element>

         <xs:element name="CreateOrder">

         <xs:complexType>

         <xs:sequence>
    <xs:element name="nome" nillable="true" type="xs:string"/>
    <xs:element name="cognome" nillable="true" type="xs:string"/>
    <xs:element name="email" nillable="true" type="xs:string"/>
    <xs:element name="list" nillable="true" type="xs:string"/>
    </xs:sequence>
    </xs:complexType>
    </xs:element>

         <xs:element name="CreateOrderResponse">

         <xs:complexType>

         <xs:sequence>
    <xs:element name="return" nillable="true" type="xs:string"/>
    </xs:sequence>
    </xs:complexType>
    </xs:element>
    </xs:schema>
    </wsdl:types>

         <wsdl:message name="CreateOrderMessage">
    <wsdl:part name="part1" element="ns0:CreateOrder"/>
    </wsdl:message>

         <wsdl:message name="CreateOrderResponse">
    <wsdl:part name="part1" element="ns0:CreateOrderResponse"/>
    </wsdl:message>

         <wsdl:message name="getScoreMessage">
    <wsdl:part name="part1" element="ns0:getScore"/>
    </wsdl:message>

         <wsdl:message name="getScoreResponse">
    <wsdl:part name="part1" element="ns0:getScoreResponse"/>
    </wsdl:message>

         <wsdl:portType name="IPODShopServicePortType">

         <wsdl:operation name="CreateOrder">
    <wsdl:input message="axis2:CreateOrderMessage" wsaw:Action="urn:CreateOrder"/>
    <wsdl:output message="axis2:CreateOrderResponse"/>
    </wsdl:operation>

         <wsdl:operation name="getScore">
    <wsdl:input message="axis2:getScoreMessage" wsaw:Action="urn:getScore"/>
    <wsdl:output message="axis2:getScoreResponse"/>
    </wsdl:operation>
    </wsdl:portType>

         <wsdl:binding name="IPODShopServiceSOAP11Binding" type="axis2:IPODShopServicePortType">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>

         <wsdl:operation name="CreateOrder">
    <soap:operation soapAction="urn:CreateOrder" style="document"/>

         <wsdl:input>
    <soap:body use="literal"/>
    </wsdl:input>

         <wsdl:output>
    <soap:body use="literal"/>
    </wsdl:output>
    </wsdl:operation>

         <wsdl:operation name="getScore">
    <soap:operation soapAction="urn:getScore" style="document"/>

         <wsdl:input>
    <soap:body use="literal"/>
    </wsdl:input>

         <wsdl:output>
    <soap:body use="literal"/>
    </wsdl:output>
    </wsdl:operation>
    </wsdl:binding>

         <wsdl:binding name="IPODShopServiceSOAP12Binding" type="axis2:IPODShopServicePortType">
    <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>

         <wsdl:operation name="CreateOrder">
    <soap12:operation soapAction="urn:CreateOrder" style="document"/>

         <wsdl:input>
    <soap12:body use="literal"/>
    </wsdl:input>

         <wsdl:output>
    <soap12:body use="literal"/>
    </wsdl:output>
    </wsdl:operation>

         <wsdl:operation name="getScore">
    <soap12:operation soapAction="urn:getScore" style="document"/>

         <wsdl:input>
    <soap12:body use="literal"/>
    </wsdl:input>

         <wsdl:output>
    <soap12:body use="literal"/>
    </wsdl:output>
    </wsdl:operation>
    </wsdl:binding>

         <wsdl:binding name="IPODShopServiceHttpBinding" type="axis2:IPODShopServicePortType">
    <http:binding verb="POST"/>

         <wsdl:operation name="CreateOrder">
    <http:operation location="CreateOrder"/>

         <wsdl:input>
    <mime:content type="text/xml"/>
    </wsdl:input>

         <wsdl:output>
    <mime:content type="text/xml"/>
    </wsdl:output>
    </wsdl:operation>

         <wsdl:operation name="getScore">
    <http:operation location="getScore"/>

         <wsdl:input>
    <mime:content type="text/xml"/>
    </wsdl:input>

         <wsdl:output>
    <mime:content type="text/xml"/>
    </wsdl:output>
    </wsdl:operation>
    </wsdl:binding>

         <wsdl:service name="IPODShopService">

         <wsdl:port name="IPODShopServiceSOAP11port_http" binding="axis2:IPODShopServiceSOAP11Binding">
    <soap:address location="http://192.168.0.4:8083/IPODv7/services/IPODShopService"/>
    </wsdl:port>

         <wsdl:port name="IPODShopServiceSOAP12port_http" binding="axis2:IPODShopServiceSOAP12Binding">
    <soap12:address location="http://192.168.0.4:8083/IPODv7/services/IPODShopService"/>
    </wsdl:port>

         <wsdl:port name="IPODShopServiceHttpport" binding="axis2:IPODShopServiceHttpBinding">
    <http:address location="http://192.168.0.4:8083/IPODv7/services/IPODShopService"/>
    </wsdl:port>
    </wsdl:service>
    </wsdl:definitions>
    and the bpel code:
    <partnerLink name="ServiceIPOD_v6.1"
    partnerRole="IPODShopServicePortType_Role"
    partnerLinkType="ns31:IPODShopServicePortType_PL"/>
    <invoke name="CustInfofromIPOD_v4" partnerLink="ServiceIPOD_v6.1"
    portType="ns31:IPODShopServicePortType" operation="getScore"
    inputVariable="CustInfofromIPOD_v1_getScore_InputVariable"
    outputVariable="CustInfofromIPOD_v1_getScore_OutputVariable"/>
    <definitions
    targetNamespace="http://service.integration.ipodshop.it"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
    xmlns:axis2="http://service.integration.ipodshop.it"
    xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    >
    <import namespace="http://service.integration.ipodshop.it" location="http://localhost:8083/IPODv7/services/IPODShopService?wsdl"/>
    <plnk:partnerLinkType name="IPODShopServicePortType_PL">
    <plnk:role name="IPODShopServicePortType_Role">
    <plnk:portType name="axis2:IPODShopServicePortType"/>
    </plnk:role>
    </plnk:partnerLinkType>
    </definitions>
    do have you any idea?
    please, help me!
    thanks
    Stefano

    Hi,
    Just in case someone runs into the same problem, I live here my solution:
    In may case the problem was the wsdl definition. I developed the web service in java and generated the wsdl with Maven. Automatically it generates the wsdl like this (I just copy the last section):
    <wsdl:service name="tso-ws">
    <wsdl:port name="tso-wsHttpSoap11Endpoint" binding="ns:tso-wsSoap11Binding">
    <soap:address location="http://localhost:8080/axis2/services/tso-ws"/>
    </wsdl:port>
    <wsdl:port name="tso-wsHttpSoap12Endpoint" binding="ns:tso-wsSoap12Binding">
    <soap12:address location="http://localhost:8080/axis2/services/tso-ws"/>
    </wsdl:port>
    <wsdl:port name="tso-wsHttpEndpoint" binding="ns:tso-wsHttpBinding">
    <http:address location="http://localhost:8080/axis2/services/tso-ws"/>
    </wsdl:port>
    </wsdl:service>
    The problem was the <wsdl:service name="tso-ws"> section. There were 3 port definitions with 3 different bindings but all of them have the same service location. So In the BPEL process I created the partner link using the service location.
    I guess BPEL was using the http binding, so I deleted two of the por definitions and just left this in the <wsdl:service name="tso-ws"> section of the wsdl
    <wsdl:service name="tso-ws">
    <wsdl:port name="tso-wsHttpSoap12Endpoint" binding="ns:tso-wsSoap12Binding">
    <soap12:address location="http://localhost:8080/axis2/services/tso-ws"/>
    </wsdl:port>
    By doing this, it works. I read in some forums that BPEL doesn't work with the http_post protocol so that's why I deleted that definition. And someone told me that it uses soap12 so that's why I deleted that definition also.
    That's the way I solved it. Hope this helps.
    Regards,
    Zaloa

  • Could not find schema information for the attribute 'filename'

    Can anyone help me.
    I download the VB.NET sample source and try to run the application and got this error.
    "Could not find schema information for the attribute 'filename'"
    and
    "Could not find schema information for the attribute 'url'"
    and
    "Custom tool warning:Schema validation warning:Schema item 'element' named 'AccountWS_AccountUpate_Input' from namespace 'urn:crmondemand/ws/account/' is invalid. Namespace 'urn:/crmondemand/xml/account' is not available to be referenced in this schema"
    Thanks
    Pitiporn

    Are these errors or warnings? If warnings, you should be able to just ignore them.

  • The error showing as Fiscal year change has not carried out for the coCd

    Hi all,
    I am facing a very critical situation. My client has the last closed fiscal year as 2006(from 2006 april to 2007 march).For the fiscal yr. 2007(2007april to 2008 march) they have already finalised and submitted the reports made from some parallel software.They now want to tally this report with SAP system and to adjust the SAP system entries as per this report.This work was running fine.But on 01.04.2009 none of the asset reports are running.The error it's throwing is as-
    Fiscal year change not yet made for company code PWAL
    Message no. AB059
    Diagnosis
    You have not yet carried out a fiscal year change for company code PWAL, although the current system date is in the new fiscal year.
    Procedure
    Carry out the fiscal year change for company code PWAL.
    Proceed
    The error is quite understandable.We have to close 2007 and then perform the fiscal year change.But the problem is that the adjustment for the year 2007 is not yet complete.Is it the only solution with me that I should close the yr.2007 and again open it after the fiscal yr. change? If that is done can I take care of the adjustment in the posted depreciation? Or is it possible that the system date can be made back to 31.03.2009(very stupid ask!). The real problem is that my client has mistakely created some assets in the year 2007(by AS91 after changing the take over date) those should have been shown in the next year and also some assets are creted in the year 2008 by the same strange method those should be shown in the year 2007.What I am doing now is deleting these legacy assets and creating the new assets in the correct year.And this process is not yet complete.If I close the year 2007, then the depreciation of these legacy assets will also be posted.Later how can I reverse the effect?Also without seeing the reports I can't make the adjustments.Please suggest/advice.
    Debabrata

    Hi Debabrata,
    You have to do all fiscal year closing steps for 2007. When you reopen it you can do a repeat run for 2007. (You can do the reapeat run only for the new/ changed assets.)
    Try first to test this in an actual test system (document it and do the same in production). Perhaps as you know when 2009 is open I want to close 2008 in one week.  All changes they make in the asset system (change depreciation keys, recalulating,...) can result in postings in 2007 / 2008 what they don't want and later fiscal year problems. You will found a lot off masages about this on the form.

  • Has anyone seen this before,? some import operations were not performed , could not copy the file to requested location

    some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?

    cormacc57361247 wrote:
    has anyone seen this or have a fix?
    Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions...

  • I want to change my region but it keeps saying "Could not complete the iTunes Store request. The store may be busy"

    I was studying in UK for the past 4 years but now I am back in my own country. I want to change the region but it keeps popping out "Could not complete the iTunes Store request. The store may be busy" for the past 3-4 days. Help?

    I've got exactly the same problem. I want to download a FREE app from the Hungary app store but my iTunes account is UK based. Very frustrating. Any help would be appreciated.
    http://itunes.apple.com/hu/app/hbo/id399598154?mt=8#

  • Attribute #MX_MSKEYVALUE_DN could not be found Self Service Password reset

    Hi,
    I use NetWeaver 7.02 and IDM 7.2
    I've just created the Self Service-Task Password Reset.
    If I call the page http://<host>:<port>/idm/pwdreset I get the following error message:
    Attribute #MX_MSKEYVALUE_DN could not be found
    DE: Attribut #MX_MSKEYVALUE_DN konnte nicht abgerufen werden
    The attribute MSKEYVALUE is available in my Identity Store.
    The Task for "Edit authentication questions" is available.

    Hi Chris,
    I use NetWeaver 7.00 SP14 and IDM 7.2 SPS 3 (tried IDM 7.1 before, but had same error) on Windows Server 2003 SP2 with an Oracle DB 10.2.0.1
    The IDM is working fine except the PwdReset Application. Maybe it has to do something with the Anonymous User?
    Executing SELECT * FROM MC_LANGUAGE_TRANSLATIONS WHERE LANGKEY = '#MX_MSKEYVALUE_DN'
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=AR
    LANGIDSTORE=1
    LANGVALUE=?????? ??????
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=BG
    LANGIDSTORE=1
    LANGVALUE=???????? ??
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=CA
    LANGIDSTORE=1
    LANGVALUE=Identificador unÌvoc
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=CS
    LANGIDSTORE=1
    LANGVALUE=JednoznacnÈ ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=DA
    LANGIDSTORE=1
    LANGVALUE=Entydig ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=DE
    LANGIDSTORE=1
    LANGVALUE=Eindeutige ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=EL
    LANGIDSTORE=1
    LANGVALUE=???ad??? ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=EN
    LANGIDSTORE=1
    LANGVALUE=Unique ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=ES
    LANGIDSTORE=1
    LANGVALUE=ID unÌvoco
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=FI
    LANGIDSTORE=1
    LANGVALUE=Yksiselitteinen tunnus
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=FR
    LANGIDSTORE=1
    LANGVALUE=ID unique
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=HE
    LANGIDSTORE=1
    LANGVALUE=????? ??????
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=HR
    LANGIDSTORE=1
    LANGVALUE=Jedinstveni ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=HU
    LANGIDSTORE=1
    LANGVALUE=EgyÈrtelmu ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=IT
    LANGIDSTORE=1
    LANGVALUE=ID univoco
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=JA
    LANGIDSTORE=1
    LANGVALUE=?? ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=KO
    LANGIDSTORE=1
    LANGVALUE=?? ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=MX
    LANGIDSTORE=1
    LANGVALUE=Unique ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=NL
    LANGIDSTORE=1
    LANGVALUE=Unique ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=NO
    LANGIDSTORE=1
    LANGVALUE=Entydig ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=PL
    LANGIDSTORE=1
    LANGVALUE=Jednoznaczny ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=PT
    LANGIDSTORE=1
    LANGVALUE=ID unÌvoco
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=RO
    LANGIDSTORE=1
    LANGVALUE=ID univoc
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=RU
    LANGIDSTORE=1
    LANGVALUE=??????????? ??.
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=SH
    LANGIDSTORE=1
    LANGVALUE=Jedinstveni ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=SK
    LANGIDSTORE=1
    LANGVALUE=JednoznacnÈ ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=SL
    LANGIDSTORE=1
    LANGVALUE=Enoznacen ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=SV
    LANGIDSTORE=1
    LANGVALUE=Entydig ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=TH
    LANGIDSTORE=1
    LANGVALUE=ID ?????????
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=TR
    LANGIDSTORE=1
    LANGVALUE=Benzersiz tanitici
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=UK
    LANGIDSTORE=1
    LANGVALUE=?????????? ?????????????
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=ZH_CN
    LANGIDSTORE=1
    LANGVALUE=????
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=ZH_HK
    LANGIDSTORE=1
    LANGVALUE=?? ID
    LANGKEY=#MX_MSKEYVALUE_DN
    LANGCODE=ZH_TW
    LANGIDSTORE=1
    LANGVALUE=?? ID
    Kind Regards,
    Tobias

Maybe you are looking for

  • How to prevent the direct execution of a Z T.Code

    Hello Friends, The scenario is like this : I am going to create an Z T.Code. I have to block this T.Code from direct execution(means executing it directly by calling from Command Field). But I must be able to execute the same T.Code from within a pro

  • ISE 1.2 load balancing and Jgroups

    Hi, I would like to loadbalance PSN nodes. Instead of using a loadbalancer I would like to use Jgroups which I have seen in release 1.2 presentations. However I am unable to find any information in configuration guides detailing how to design and con

  • Need insight for setting up permissions for sharing an external hd via OS X 10.6?

    Hello intelligent lifeforms, My supervisor and friend passed away a little over a year ago, and I am now trying to fill his shoes as the networking guru and could use some assistance.  I'm trying to share an external hard drive that is connected to m

  • Underclocked cpu can it be made to run faster

    hi i read somewhere n8 has 772 mhz cpu underclocked is it possible to utilize the full  power of cpu most importantly will it  improveteh n8 xperience??? how will it effect battery life? except for n8 requiring charging everyday post anaa   i have no

  • Re: Lock table overflow

    Guys, We have R/3 4.7 E system on oracle 9i. While we doing the archiving,we get enque error like lock table is overflown. Please advise Thanks, Susan