Operation could not be completed because you dont have access to some files

Hi guys,
Recently since an update not long ago ever since i have been trying to copy stuff into my NAS (Thecus N5200) it comes up with a problem saying
"Operation could not be completed because you do not have access to some files"
I have read some places who say that this is due to some permission errors or some of the files get locked somehow and means you cant copy it properly however i have checked these files and it is not the case. I have looked online and even called up Apple to see what they could tell me but even they said that they havent had any calls regarding this problem before. The person from Apple suggested i try doing a Disk Permissions repair and for a while it works...but 5 minutes later it happens again.
What can i do to fix it? I will be extremely unhappy if i have to keep doing this every time i copy something. Sometimes Repair Disk Permissions wont change a **** thing. This is ******** because its never happened before and only started recently

sorry for the long correspondance. I sort of "forgot" about this thread and was using usb to transfer files (which is quite annoying).
AFP is enabled which means i believe it is connecting to the server through AFP. The funny thing is that it copies pretty much all the way to the end and then says "operation could not be completed because you dont have access to some files" . Im not sure what it has to do with disk permissions but sometimes it helps and sometimes it doesnt.
Thanks for the link Barney, looks like im not the only one suffering from these issues. I was connecting via smb://server before, i just tried mounting it via afp://xxx.xxx.x.xx . i will see how it goes but some people say its slower? for documents i dont mind but i hope apple comes up with a solution. i dont want to be copying large tv show files to the server at anything less than what i was getting before
edit: i just looked at the logs of previous connections with servers on the mac and i found there was a difference between how i mounted this server recently and it a while back. recently i had been trying to connect using smb://n5200 and in the past before snowleopard it had been smb://N5200. I tried once again to connect using smb://N5200 and it works flawlessly (for the moment). im going to keep trying to copy different files to see if its "fixed". perhaps the introduction of snowleopard made the OS more picky about capitals.
i shall keep you informed
Message was edited by: nairdajun

Similar Messages

ITunes error massage:Your iTunes library could not be saved because you dont have enough premission.

I clicked ok.a week later i opened itunes and my whole library gone.there was nothing in itunes.i opened my videos and songs again with itunes.it happened to me 3 times.What do i have to do?i also use itunes 10.3.4.help please

please help.I need a help quick

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

Hi Friends...
I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

Sorry, I am very confused. I asked the following question....
Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
The answer that you gave was....
This is the only one
Now you are saying that....
But I have lots of other files on Time Capsule! The back up file is only one of them.
Can you clarify, please?

The operation could not be completed because an item with the name xyz already exists

I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?

If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities

The operation could not be completed because there is not enough space on the destination disk

I have 124Gig of space left on my HD, when I try to export my movie i get this error "The operation could not be completed because there is not enough space on the destination disk" I have read some of the threads went in and deleted the iMovie Preference file but no luck.. any Ideas? Thanks!

You need the System DVDs that originally came w/the computer in order to troubleshoot. All Macs prior to & including ML came w/System DVDs.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

The operation could not be completed because an error occurred when creating frame 6105 (error -1).

I am trying to share a project and after the 3% of sharing the project it appears this message.
The operation could not be completed because an error occurred when creating frame 6105 (error -1).
What can I do?? I need some help please!!

You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.

Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help

Double post…

The operation cant be completed because you dont have permission to access some of the items

First of all sorry if my gammar isnt the best, as I suffer for Dylexia and spell and gammar check isnt that good yet!
Has anyone ran into the same issue when copying files to a network share or removable drive where you have full access over and you get a good old error message
"operation cant be completed because you dont have permission to access some of the items" or and apple random number code that you need to good (so much for a good gui with having to google for the number codes!)
It really annoyes me as no matter what operating system you use it never outputs a reports to inform what "items" it has issues with and there locations so you can copy them manually.
its not too bad when its a few items but when it is 50 or so items in several folders you are copying and the os decedes it doesnt like you and makes up an poor error message such as the one above I really want to throw it out the window...
I have check for premissions on the destination and all are ok .
i have also check and none of the files are locked or read only.
I am sure I am not the only one who want the OS to explain what file and its location caused the issue.
Does anyone know the fix or uses tools that bypass the os annoying errors.
As the folder I have been trying to copy has only copied 348 of the 1591 files across.
Thanks for the help!

that1coolkid,
which Terminal “trick” have you already tried?

I have a pop up window that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61). What does that mean?

I am using a portable USB storage drive connected to my laptop. I am trying to delete a file from the USB drive but it is not working. A pop up window appears that says "Sorry the operation could not be completed because an unexpected error occured (Error code -61)". What does that mean and how do I fix it? Thank you.

All I can tell you is that is a write permissions error. How is this drive formatted? Check the file's permissions. You can try:
Open the Terminal application in the Utilities folder. At the prompt enter:
sudo rm -rf
Leave a space after "-rf" and drag the file into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?

https://discussions.apple.com/thread/6219522

The operation could not be completed because an error occurred when creating frame 19788 (error -1).

When attempting to build a quicktime movie from my video project on final cut pro I got this message "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

Kathy ...
Better to post your topic in the Final Cut Pro community here.

The operation could not be completed because an error occurred when creating frame 570 (error -1)

Hi everybody,just started with FCPX and the following occured:
The operation could not be completed because an error occurred when creating frame 570 (error -1)
Result is that i can not share to my hard disk.
If anybody could help me out here....?

CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.

The operation could not be completed because an error occurred when creating frame 2829 (error -1)

I'm getting this error code in Final Cut Pro. The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it? This code comes up when exporting.

Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

The operation could not be completed because an error occurred when creating frame 30256 (error -1).

When trying to export a project from FCPX, I get this error
The operation could not be completed because an error occurred when creating frame 30256 (error -1).
Has anyone any ideas?
Many Thanks

Switch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.

Operation could not be completed because you dont have access to some files

Similar Messages

Maybe you are looking for