Operation logs

Hi,
a question for you, experts.
The system saves logs of all operations that the users execute on SAP?
And where I can find this logs?
Thanks, regards.

Oh yes. There is a protocol mechanism they call "Aenderungsbelege" in German. But i' m not very familiar with it.
All I know is: There is a global profile parameter rec/client which is the main switch to record the changes. Every table has a property bit for recording. If it is on, the changes are recorded for this table.
Not familiar with reporting on the recorded data.
Kind regards, Rudi

Similar Messages

  • Missing boot events on the Diagnostic performance operational log (event-id 100)

    I noticed that event (100) is not always reported or not reported at all on several machines and I would like to understand how can I force reporting it.
    In addition I would appreciate if you can explain regarding the keys under:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
    Things I've already tested on win7:
    1. Verified that the diagnostic performance > operational log is enabled
    2. Services: ‘Diagnostic Policy Service’ (auto) and ‘Diagnostic service host’ (manual) were running
    3. Verified that GPO is not disabled for:
    - Computer Configuration\Administrative Templates\System\Troubleshooting
    - Diagnostics\Windows Boot Performance Diagnostics Computer Configuration\Administrative Templates\System\Troubleshooting and Diagnostics\Diagnostics: Configuration scenario executing level
    Thanks,

    For keys under [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Diagnostics\Performance\Boot]
    Please take a look of discussions in this link(reply posted by David J)
    Diagnostics-Performance log Event 100 - Critical, Error, or Warning - when and why?
    http://social.technet.microsoft.com/Forums/windows/en-US/48005f5d-5f66-439a-af51-3a2ebb894e31/diagnosticsperformance-log-event-100-critical-error-or-warning-when-and-why?forum=w7itproperf
    My understanding to this issue—“event (100) is not always reported or not reported at all on several machines”
    is that : this kind event log occurs when an time parameter during the boot process reaches a threshold in the registry key, then a warning, critical or error message will appear in the event viewer. If it doesn’t reach the threshold, then there will be
    no report.
    Regards
    Yolanda
    TechNet Community Support

  • Nokia C2-01 How to Active Operator logs?

    I'm Sudip from Silchar
    I want to active Operator logs in My Nokia C2-01
    How to active Operator Logs? Tell Me Quickly.
    Solved!
    Go to Solution.

    Look in display settings if its there and greyed out its not possible this way,or you can google OPERATOR LOGO and your phone plenty of help there.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Exporting Operations Log to file

    Hi,
    We have a requirement to retain the Management Operations logs i.e. who created what, and when. Can anyone point a noob in the right direction please?

    Have you seen any sample apps on the web?  I don't have too much time to code something, so wondering if there is anything like a client app to download logged events with a GUI similar to the web site, where I can plug in a subscription and get logs.
    Thanks, Jason
    Didn't get enough help here? Submit a case with the Microsoft Customer Support teams for deeper investigation - Azure service support: https://manage.windowsazure.com/?getsupport=true For on Premise software support go here instead: http://support.microsoft.com/select/default.aspx?target=assistance

  • Stats in Cube Operation Log

    Hello,
    Does anyone know what does the 'STAT_COMP_TIME' operation that is logged in the Cube_Operations_log table mean?
    The 'TOTAL_TIME' stats in the Cube_Operations_log table for one of my queries is about 6 secs but 'STAT_COMP_TIME' is around 7 secs.
    Thanks

    Thanks
    One of the reasons why I am asking these questions is that there seem to be quite a big overhead querying the dimension/cube views through SQL
    For e.g
    select dim_key from time_view where level_name = 'YEAR'; takes around ~ 4sec on my current hardware and database configuration
    But same query in the OLAP Worksheet using DML e.g. limit TIME to (inlist('YEAR' TIME_LEVELREL)) and report TIME returns almost instantly.
    Another e.g. querying a cube view takes roughly around 5 secs (using Cube_Table, and ensuring LOOP Optimized is on)
    select sales from sales_cube_view where customer = 'ALL' and time = '2010' and location = 'ALL'
    But same query in the OLAP Worksheet using DML
    limit SALES_CUBE_MEASURE_DIM to 'SALES'
    limit customer to 'ALL'
    limit location to 'ALL'
    limit time to '2010'
    report sales_cube_stored
    The data is returned almost instantly
    I'm on version 11.2.0.2. It will be good to understand what is the additional overhead that's taking quite a significant portion of the time.
    Thanks

  • How can I test the log in state from in side the Operator Interface code.

    From inside LabVIEW Full OI, I want to test if the operator logged in after the IApplicationMgr Start.
    Right after the IApplicationMgr ‘Start’ I have a loop that tests the IApplicationMgr ‘LoginLogoutRunning’ state and waits until the LoginLogout call back is done.
    I want to exit if the program if operator canceled the login and did not log in.
    I have tried “GetEngine” ref. From there get the “CurrentUser” ref but seems not to contain any information about the Current User.
    How can I test from my Operator Interface code logged in state of the application?
    Thanks
    Jim D.

    Try Engine.CurrentUserHasPrivilege
    For the string parameter 'privilegeName' enter Priv_UserLoggedIn or the string value "*".
    "Priv_UserLoggedIn–(Value: "*") Use this value with the Engine.CurrentUserHasPrivilege method to determine whether a user is logged in."
    Option 2: You could also setup a callback on application manager for UserChanged Event.  If the User is null then the login was canceled.  (see a copy of the help further down)
    From the teststand help for Engine.CurrentUserHasPrivilege method below...
    CurrentUserHasPrivilege Method
    Syntax
    Engine.CurrentUserHasPrivilege ( privilegeName)
    Return Value
    Boolean
    True if the current user has the privilege.
    Purpose
    Confirms whether the current user or any user group that the user is a member of has a specific privilege.
    Remarks
    Returns True when the privilege property is True, when the privilege property of any group that contains the privilege is True, or when privilege checking is disabled, StationOptions.EnableUserPrivilegeChecking is False. If privilege checking is disabled but StationOptions.RequireUserLogin is True, this function returns True only if there is a user currently logged on.
    Parameters
    privilegeName As String
    [In] Specifies the name of the privilege to check. You can specify the name of any privilege property. You can specify the full privilege path in the user privileges property tree, for example, Debug.RunSelectedSteps, or you can specify the base privilege name, RunSelectedSteps. If you specify only the base privilege name and more than one instance of the base privilege name exists, then the method returns the value of the first base privilege it finds with that name. Refer to UserPrivileges for more information.
    Teststand callback for UserChanged Event...
    UserChanged Event
    Syntax
    ControlName_UserChanged ( user)
    Applies To
    ApplicationMgr
    Purpose
    Occurs when the current user logged in changes.
    Remarks
    Use this event to update the parts of your user interface that depend on user permissions when the current user logged in changes.
    Parameters
    user As User
    [In] Current user. If this parameter is NULL, there is no user logged in.

  • NC Logging/Disposition with SFC QTY 1, not able to Log Second NC on SFC

    Hi,
    i ran into a problem with the NC Logging / Disposition functionality while trying to log NCs for SFCs with a Quantity>1
    Scenario:
    Released SFC with Quantity = 10
    NC_DATA_ENTRY Activity Rule ALLOW_PARTIAL set to YES
    NC_DATA_ENTRY Activity Rule AUTO_SPLIT set to NEVER (ASK and ALWAYS don't make a difference)
    Data Field Assignment Maintenance: Attached Data Field DEFECT_COUNT to Data Type attached to my NC Codes
    NC Code Maintenance: Set Maximum NC Limit (SFC) to 0
    Material Maintenance: Qty Restriction set to Whole Number (tried Any Number as well, no difference)
    Started SFC QTY 1 at first Operation
    Logged NC for QTY1, QTY1 automatically Dispositioned and Scrapped
    Now the issue:
    If i start a second QTY 1 in the POD, and try to Log a NC, the NC Selection appears and i can choose a NC Code,
    but the "Log NC" button stays greyed out.
    The same thing happens on different Operations as well, so somehow the the system doesn't allow a second NC to be logged against the SFC.
    Is there an additional configuration i have to execute to get this working as expected?
    Thanks in advance.

    Hi!
    I've tried your scenario. In my system, "Log NC" button in NC Selection plugin gets activated each time when NC Data Entry plugin is closed and I select a row in Available NC Codes column of NC Selection plugin.
    If NC Data Entry plugin is open, the button is grayed out always.
    Regards,
    Sergiy

  • Scenario execution with log level Zero

    I am executing the scenarios with log level zero, but it purges the operator logs on successful execution. With log level Zero, is it possible to stop the automatic purge of the operator logs on successful execution?

    I just get "SnpSession does not exist" error on this, this error is generated if we don't have an entry for that scenario in SNP_Session table. However, ODI if is provided with log level 0 deletes corresponding entries from SNP_Session table on successful completion of a scenario. Which is also happening in my case and entries are being deleted from table for Scen B and Scen C, but since Scen fails it remains in the table. Again, Once I have gotten the log_level in a variable in Scen A i am just making use of that variable in the subsequent scenarios. Also, when executed with log level 1, 2, 3, 4, 5 it works jolly good.

  • Scenario execution errors not logged

    Hi,
    in production environment, we start our scenarios by means of startscen.bat.
    Sometimes, when an error occurs, startscen.bat returns an error which does not appear in the operator log (scenario seems to be still running).
    Has someone been faced to such a behaviour? What can the problem come from?
    Thanks in advance for your tips.
    Fredd.
    Edited by: fredd2 on Feb 16, 2009 12:19 PM

    Hi Bhabani,
    Thanks for the reply.
    I am afraid that this is a major issue for me, I do not want to re-query the source table for each target table, but on the other hand I cannot fail the process for each invalid record and I need the logging.
    Can you think of a workaround for my use case?
    Thank you!

  • Scenario session log

    I am using ODi 10.1.3.6.0 I have unique issue for logging details in operator, When I run the same scenaro it delets previous log detail and all the lower level of deatils about each step, only the highest level of log entry stay in operator log. I am executing my scenario each time with log level of 5.
    Thanks
    Kaashi

    I know that it could be a stupid question but have you got some filters? Are you checking "yesterday" list?
    Check Odi session number. They are a sequence followed by 3digit (id repo). For example if you have got a repo with id 123 you should have
    *000001*123
    *000002*123
    *000003*123
    *000004*123
    and so on..
    have you got any gap?

  • Biometrics Log-In For HP Envy Laptops Should be at the BIOS Level

    The Biomentrics Login for the HP Envy Laptop is Implemented in Windows 8.1 and is Effective only for Login Security to the Windows 8.1 OS --
    If we have a Multi-Boot System ... anyone can break in still into your Laptop or System by simply Rebooting the System and accessing one of the other Partitions -- 
    It would perhaps be a better security mechanism if this Biometrics Login feature was also implemented at the BIOS
    Level with the additional Flag to enable or Disable for the User if so desires !!
    Cheers !!

    Hi,
    Have we tried the
    printer troubleshooter?
    Meanwhile, please enable the Operational log of the PrintService, follow the below steps:
    1.   Open 
    Event Viewer
    2.   Expand
    Application and Services Logs\Microsoft\Windows\PrintService.
    3.   Right-click
    Operational and choose Enable Log.
    Note: The PrintService Operational Log will log a great number of events on a busy print server and should only be enabled for troubleshooting purposes. Disable the log once troubleshooting is completed.
    You can increase the log file size if necessary to accommodate the amount of data you need to collect to troubleshoot your situation.
    For more troubleshooting information, we might take a look at the following TechNet blog(The method could also be used in Windows 8):
    Troubleshooting printing
    Hope this may help here.
    Best regards
    Michael Shao
    TechNet Community Support

  • How to filter logs

    Hi guys,
    How can i filter logs on username in EventViewer? When i put username or computers name in filter, it doesn't work.
    How to determine why user is locked? i know it is due to group policy, but can i see it in logs?
    Thanks

    Hi,
    Since you have mentioned that it is related to Group Policy. Did you checked the Group Policy operational log? If not, you can follow the following steps to view the Group Policy operational log:             
    Start the Event Viewer.
    Click the arrow next to Applications and Services Logs.
    Click the arrow next to Microsoft, and then Windows, and then
    Group Policy.
    Click Operational.
    Click Filter Current Log, enter the user account in Users
    and click OK.
    Best regards,
    Susie

  • How to active Operator Logo?

    Hi,
    How to Active Operator Logo In My Nokia C2-01.
    Someone tell me please.

    question answered already here: http://discussions.nokia.com/t5/Xseries/Nokia-C2-0​1-How-to-Active-Operator-logs/td-p/1697264

  • Inspiron 5548 logs out every time I add/remove a second monitor

    I have a new Dell Inspiron 5548 running Windows 8.1, and I noticed every time I change the monitor configuration the system logs me out. This happens if I connect a new monitor and change the configuration from "duplicate" to "extend" or if I connect or disconnect a monitor that I'm using as a second display. Any thoughts? Maybe a graphics card issue?
    The system has Intel HD Graphics 5500 and an AMD Radeon R7 M270 card (4 GB).

    Awesome!  This worked for me as well.  My steps to get this Intel driver:
    1) Open Device Manager, select Display adapters, double click Intel HD Graphics 5500, go to Driver tab, click on Uninstall.  I did not click the "remove driver" option.  This operation logged me out.
    2) Login.  Open Device Manager and get to Display adapters as above.  Now I saw a Microsoft basic driver instead of the Intel HD5500 driver.  Double click it.  Select the "Update Driver" button.  Select the "Search automatically..." option.  It went out and found Intel HD Graphics 5500, v10.18.14.4156, 3/3/2015 and installed it.
    What's frustrating is that if you simply go to the Display adapters and select "Update Driver" for the installed (and problematic) 2014 version of HD5500 driver, it tells you it is already up to date!  If you go to Intel site directly and download and run their Intel Driver Update Utility, it also doesn't indicate that a newer HD5500 driver exists.
    Such a time waste.
    Oh, and that support ticket I filed last week?  Dell hasn't even assigned it yet.  Way to go Dell, thanks (not) for the assistance.

  • DBCC SHRINKFILE with NOTRUNCATE has any performance impact in log shipping?

    Hi All,
    To procure space I'm suggested to use below command on primary database in log shipping and I just want
    to clarify whether it has any performance impact on primary database in log shipping and also is it a recommended practice to use the below command
    in regular intervals in
    case the log is using much space of the drive. Please suggest on this. Thank You.
    "DBCC
    SHRINKFILE ('CommonDB_LoadTest_log', 2048, NOTRUNCATE)"
    Regards,
    Kalyan
    ----Learners Curiosity Never Ends----

    Hi Kalyan \ Shanky
    I was not clear in linked conversation so adding some thing :
    As per http://msdn.microsoft.com/en-us//library/ms189493.aspx
    ----->TRUNCATEONLY is applicable only to data files. 
    BUT
    As per : http://technet.microsoft.com/en-us/library/ms190488.aspx
    TRUNCATEONLY affects the log file.
    And i also tried , it does works.
    Now Truncateonly : Releases all free space at the end of the file to the operating system but does not perform any page movement inside the file. The data file is shrunk only to the last allocated extent. target_percent is ignored if specified
    with TRUNCATEONLY.
    So
    1. if i am removing non used space it will not effect log shiping or no log chain will broke.
    2. If you clear unsued space it will not touch existing data. no performance issue
    3. If you clear space and then due to other operation log file will auto grow it will put unnecessary pressure on database to allocate disk every time. So once you find the max growth of log file let it be as any how again it will grow to same size.
    4. Shrinking log file is not recommeded if its again and again reaching to same size . Until unless you have space crunch
    Thanks Saurabh Sinha
    http://saurabhsinhainblogs.blogspot.in/
    Please click the Mark as answer button and vote as helpful
    if this reply solves your problem

Maybe you are looking for