Opmn fails with connection refused

Hi all,
I've successfully installed Oracle Application Server 10g AS R2.
After installation I could successfull login and access both Infra and Middle Tier using OEM, which were configured under a single Farm.
But unfortunately, after and when the server is restarted... opmnctl startall hangs with ons.log contents as below
08/06/23 16:25:14 [4] ONS server initiated
08/06/23 16:53:15 [4] Logging disabled
08/06/23 16:57:43 [4] ONS server initiated
08/06/23 16:57:43 [4] Connection 1,192.168.6.183,6201 connect (Connection refused)
08/06/23 16:59:42 [4] Connection 1,192.168.6.183,6201 connect (Connection refused)
08/06/23 17:01:41 [4] Connection 1,192.168.6.183,6201 connect (Connection refused)
08/06/23 17:03:40 [4] Connection 1,192.168.6.183,6201 connect (Connection refused)08/06/23 17:04:00 [4] Logging disabled
As a workaround I verified /etc/hosts file... it is as below
127.0.0.1 localhost.localdomain localhost
192.168.6.183 oravis.dsrc2.com oravis
I'm performing the start-up & shutdown in the following order
START DB Tier
Start Database as
Make sure your are in DB Home
$ sqlplus "/as sysdba"
SQL> startup
Start DB Listener as
Make sure your are in DB Home
$ lsnrctl start RETEK
Startup 10gAS Server
Start Middle Tier iAS Console
Make sure your are in Middle Tier Home
cd $ORACLE_HOME/bin
emctl start iasconsole
Start Infra iAS Console
Make sure your are in Infra Home
cd $ORACLE_HOME/bin
emctl start iasconsole
Start Infra listener as
$ lsnrctl start
Start Infra Database as -
$sqlplus "/as sysdba"
SQL> startup
Start Infra OC4J Services as
Make sure your are in Infra Home
$./opmnctl startall
Start Middle Tier OC4J Services as
Make sure your are in Middle Tier Home
$./opmnctl startall
Shutdown 10gAS Server
Stop Middle Tier Services as
Make sure your are in Middle Tier Home
cd $ORACLE_HOME/opmn/bin
$./opmnctl stopall
Stop Infrastructure Services as
Make sure your are in Infra Home
$ ./opmnctl stopall
Stop Infra Listener as
Make sure your are in Infra Home
$ lsnrctl stop [listener_name]
Stop Infra Database as
Make sure your are in Infra Home
$ sqlplus "/as sysdba"
SQL> shutdown immediate
Stop Infra iAS Console
Make sure your are in Infra Home
cd $ORACLE_HOME/bin
emctl stop iasconsole
Stop Middle Tier iAS Console
Make sure your are in Middle Tier Home
cd $ORACLE_HOME/bin
emctl stop iasconsole
Stop DB Tier
Stop Listener as
Make sure your are in DB Home
$ lsnrctl stop [listener_name]
Stop Database as
Make sure your are in DB Home
$ sqlplus "/as sysdba"
SQL> shutdown immediate
Now... I'm able to access the Infra & Middle tier throgh OEM but the status is Unavailable. Moreover now they not under the Farm (Which they were earlier in).
Also it is giving error connecting to repository database.
Please anybody, who have come across this kind of problem, kindly guide me, where actually I'm missing.
-Mahesh

Hi Adith,
Thanx a lot for the updates and correcting me. I've gone through the documents and corrected the way by which I was starting the services.
But... when I try to do opmnctl startall, now I again got struck up with this strange error in ons.log
08/06/24 10:26:02 [4] ONS server initiated
08/06/24 10:47:51 [2] Connection 1,192.168.6.183,1521 SSL handshake failed
08/06/24 10:47:51 [2] Handshake for 1,192.168.6.183,1521: nz error = 28864 interval = 0 (180 max)
08/06/24 10:49:50 [2] Connection 1,192.168.6.183,1521 SSL handshake failed
08/06/24 10:49:50 [2] Handshake for 1,192.168.6.183,1521: nz error = 28864 interval = 0 (180 max)
08/06/24 10:51:49 [2] Connection 1,192.168.6.183,1521 SSL handshake failed
08/06/24 10:51:49 [2] Handshake for 1,192.168.6.183,1521: nz error = 28864 interval = 0 (180 max)
I've gone through metalink and found out that this is a problem with SSL Authentication which been stated as a bug.
Can anybody answer my following queries...
1. Is it mandatory to enable SSL in 10g AS? Can we run server without SSL?
2. If not mandatory, then how to disable SSL?
3. If the handshake error is a bug, how to fix? Do I need to apply any patch for this?
Looking forward for immediate response,
Regards
-Mahesh

Similar Messages

  • Decision Service calls failing with connection refused

    Hi All,
    Breifing of the bpel process - Async bpel process XX_BPEL_ASYNC_002 calls decision services and a sync bpel process XX_BPEL_SYNC_001.
    We have moved to cluster 10.1.3.5.0 from 10.1.3.3.0 and the deployement of the bpel process and the decision service done on two nodes i.e., node51 and node55.
    But the bpel process is able to call the decision service only when the node 51 is UP and running, but if node 51 is down and node 55 is up and running it is failing with connection refused error. It is also working when 55 is DOWN and 051 is UP.
    the exact error is:
    exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection refused.
    We are using file based repository.
    It is failing when it tries to call particular url:
    http://loadbalancerurl:7777/orabpel/domain001/XX_BPEL_ASYNC_002/1.0/decisionservices.decs
    Can anyone please help me or advice me for finding some solution.
    Thanks
    Sreejit

    Hi Fatsah,
    It has been a while since we resolved this problem. But these were  the basic steps that we had taken.
    The receiver was configured a File adatpter with FTP:
    Port: 10021
    Connection security : FTPS (FTP using SSL/TLS) for Control and Data Connection
    Command Order: AUTH TLS,USER,PASS,PBSZ,PROT
    Problem: The message was blocked in our firewall.
    FTPS in this case used 10021 as the control port and the firewall allowed to pass the control request.
    Once the connection was accepted at the control level, it generated a random port number  to pass data on the channel.
    This random port number was blocked in the firewall.
    We monitored the data port numbers generated at firewall. Then we configured the firewall to open any port number  between the specific IP addresses of the sender and the receiver. That resolved the problem.
    Hope this helps!
    Please give points if this is helpful.
    Thank you.
    Dharmasiri Amith

  • Sccheck fails with connection refused

    I have a 2 node cluster that was just upgraded from SC3.0 to SC3.1u4 (8/05). sccheck passes on node aemhrsDV1 and fails with the following message on aemhrsDV2:
    [email protected] # sccheck -b -v2 -h aemhrsDV2
    sccheck: Requesting explorer data and node report from aemhrsDV2.
    sccheck: aemhrsDV2 error: Connection refused
    sccheck: Unable to run checks on: aemhrsDV2All SC3.1 patches have been applied. All availble agents were updated using 'scinstall -u update -s all' and re-registered. Test ip addresses were supplied during 'scinstall -u update -S interact'.
    Both nodes come up fine individually in cluster (through step 10) but together the log /var/cluster/ucmm/ucmm_reconf.log shows:
    Thu Aug  9 21:47:04 EST 2007 SUNWscucm.ucmm_reconf udlm started in cmmstep2
    Thu Aug  9 21:48:44 EST 2007 SUNWscucm.ucmm_reconf udlm completed successfully in cmmstep2
    Thu Aug  9 21:48:44 EST 2007 SUNWscucm.ucmm_reconf cvm started in cmmstep2
    Thu Aug  9 21:48:45 EST 2007 SUNWscucm.ucmm_reconf cvm completed successfully in cmmstep2
    Thu Aug  9 21:48:45 EST 2007 SUNWscucm.ucmm_reconf ucmm reconfiguration step 2 completed
    Thu Aug  9 21:48:45 EST 2007 SUNWscucm.ucmm_reconf Step: cmmreturn CURRNODES=0 1Running scstat -i hangs forever at IPMP Groups with both nodes in cluster but separately displays the adapters and status.
    Node 1
    [email protected] # ifconfig -a
    lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
            inet 127.0.0.1 netmask ff000000
    ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet 192.168.100.30 netmask ffffff00 broadcast 192.168.100.255
            ether 0:3:ba:39:f5:62
    ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet 192.168.101.30 netmask ffffff00 broadcast 192.168.101.255
    ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
            inet 192.168.251.30 netmask ffffff00 broadcast 192.168.251.255
            ether 0:3:ba:39:f5:ef
    ge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
            inet 10.10.3.30 netmask ffffff00 broadcast 10.10.3.255
            groupname nafo0
            ether 0:3:ba:b:e:8
    ge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 4
            inet 10.10.3.31 netmask ffffff00 broadcast 10.10.3.255
    qfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
            inet 10.10.3.33 netmask ffffff00 broadcast 10.10.3.255
            groupname nafo0
            ether 0:3:ba:17:97:d5
    qfe0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 5
            inet 10.10.3.32 netmask ffffff00 broadcast 10.10.3.255
    qfe2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 6
            inet 192.168.2.112 netmask ffffff00 broadcast 192.168.2.255
            ether 0:3:ba:17:97:d7
    qfe7: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
            inet 172.16.1.1 netmask ffffff80 broadcast 172.16.1.127
            ether 0:3:ba:17:98:68
    qfe3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 8
            inet 172.16.0.129 netmask ffffff80 broadcast 172.16.0.255
            ether 0:3:ba:17:97:d8
    clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1486 index 9
            inet 172.16.193.1 netmask ffffff00 broadcast 172.16.193.255
            ether 0:0:0:0:0:1Node 2
    [email protected] # ifconfig -a
    lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
            inet 127.0.0.1 netmask ff000000
    ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet 192.168.100.40 netmask ffffff00 broadcast 192.168.100.255
            ether 0:3:ba:39:f5:50
    ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
            inet 192.168.101.40 netmask ffffff00 broadcast 192.168.101.255
    ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
            inet 192.168.251.40 netmask ffffff00 broadcast 192.168.251.255
            ether 0:3:ba:39:f5:20
    ge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
            inet 10.10.3.40 netmask ffffff00 broadcast 10.10.3.255
            groupname nafo0
            ether 0:3:ba:b:41:22
    ge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 4
            inet 10.10.3.41 netmask ffffff00 broadcast 10.10.3.255
    qfe0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 5
            inet 10.10.3.43 netmask ffffff00 broadcast 10.10.3.255
            groupname nafo0
            ether 0:3:ba:17:96:2d
    qfe0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 5
            inet 10.10.3.42 netmask ffffff00 broadcast 10.10.3.255
    qfe0:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 5
            inet 10.10.3.35 netmask ffffff00 broadcast 10.10.3.255
    qfe7: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 6
            inet 172.16.1.2 netmask ffffff80 broadcast 172.16.1.127
            ether 0:3:ba:17:97:18
    qfe3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
            inet 172.16.0.130 netmask ffffff80 broadcast 172.16.0.255
            ether 0:3:ba:17:96:30
    clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1486 index 8
            inet 172.16.193.2 netmask ffffff00 broadcast 172.16.193.255
            ether 0:0:0:0:0:2
    [email protected] # scstat
    -- Cluster Nodes --
                        Node name           Status
      Cluster node:     aemhrsDV1           Online
      Cluster node:     aemhrsDV2           Online
    -- Cluster Transport Paths --
                        Endpoint               Endpoint               Status
      Transport path:   aemhrsDV1:qfe7         aemhrsDV2:qfe7         Path online
      Transport path:   aemhrsDV1:qfe3         aemhrsDV2:qfe3         Path online
    -- Quorum Summary --
      Quorum votes possible:      3
      Quorum votes needed:        2
      Quorum votes present:       3
    -- Quorum Votes by Node --
                        Node Name           Present Possible Status
      Node votes:       aemhrsDV1           1        1       Online
      Node votes:       aemhrsDV2           1        1       Online
    -- Quorum Votes by Device --
                        Device Name         Present Possible Status
      Device votes:     /dev/did/rdsk/d3s2  1        1       Online
    -- Device Group Servers --
                             Device Group        Primary             Secondary
      Device group servers:  rmt/1               -                   -
      Device group servers:  rmt/2               -                   -
    -- Device Group Status --
                                  Device Group        Status
      Device group status:        rmt/1               Offline
      Device group status:        rmt/2               Offline
    -- Multi-owner Device Groups --
                                  Device Group        Online Status
    -- Resource Groups and Resources --
                Group Name          Resources
    Resources: nfs-test            aemhrsDVlh
    Resources: hastp-aemhrsDV1-rg  -
    Resources: hastp-aemhrsDV2-rg  -
    Resources: rac-framework-rg    rac_framework rac_udlm rac_cvm
    -- Resource Groups --
                Group Name          Node Name           State
         Group: nfs-test            aemhrsDV1           Offline
         Group: nfs-test            aemhrsDV2           Online
         Group: hastp-aemhrsDV1-rg  aemhrsDV1           Online
         Group: hastp-aemhrsDV2-rg  aemhrsDV2           Online
         Group: rac-framework-rg    aemhrsDV1           Pending online
         Group: rac-framework-rg    aemhrsDV2           Online
    -- Resources --
                Resource Name       Node Name           State     Status Message
      Resource: aemhrsDVlh          aemhrsDV1           Offline   Offline
      Resource: aemhrsDVlh          aemhrsDV2           Online    Online - LogicalHostname online.
      Resource: rac_framework       aemhrsDV1           Starting  Degraded - reconfiguration in progress
      Resource: rac_framework       aemhrsDV2           Online    Online
      Resource: rac_udlm            aemhrsDV1           Offline   Offline
      Resource: rac_udlm            aemhrsDV2           Online    Online
      Resource: rac_cvm             aemhrsDV1           Offline   Offline
      Resource: rac_cvm             aemhrsDV2           Online    Online
    -- IPMP Groups --
                  Node Name           Group   Status         Adapter   Status
                  ---------           -----   ------         -------   ------I believe the reconfig is coming from aemhrsDV2 since sccheck will not run.
    Suggestions?

    Also the output from the sccheck commad using 'ksh -x' shows where the error is occurring and exiting with a status of 107.
    The line executed is 765 of the script.
    # echo "CLASSPATH: ${CLASSPATH}"
    ${JAVA} -classpath ${CLASSPATH} ${JDEFINES_LIST} ${JAVA_CLIENT} &
    JVM_PID=$!
    + JVM_PID=13881
    # now wait for java to exit
    wait $JVM_PID
    + wait 13881
    + /usr/java/bin/java -classpath /usr/cluster/lib/sccheck:/usr/cluster/lib/sccheck/sccheck.jar:/usr/cluster/lib/sccheck/k
    ae/kae.jar:/usr/cluster/lib/sccheck/kae/kae-libs.jar:/usr/cluster/lib/sccheck/kae/eras-common.jar:/usr/cluster/lib/scche
    ck/kae/common-libs.jar:/usr/cluster/lib/sccheck/kae/eras-parsers.jar:/usr/cluster/lib/sccheck/kae/explorer-input-source.
    jar:/usr/cluster/lib/sccheck/kae/resources:/var/cluster/sccheck/tmp/client.0 -Dcom.sun.eras.common.logging4.config.file=
    /usr/cluster/lib/sccheck/sccheck.logging4.properties -Dke.client.log=/var/cluster/logs/sccheck/ke-client.log.0 -Dke.clie
    nt.xsldir=/var/cluster/sccheck/tmp/client.0 -Dsccheck.clustername=aemhrsDV -Dsccheck.clustermode=true -Dsccheck.localnam
    e=aemhrsDV2 -Dsccheck.privatelocalname=clusternode2-priv -Dsccheck.publicnodenames=aemhrsDV1,aemhrsDV2 -Dsccheck.private
    nodenames=clusternode1-priv,clusternode2-priv -Dsccheck.clientnumber=0 -Dsccheck.explorersgzDir=/var/cluster/sccheck/exp
    lorers-gz -Dsccheck.explorersUnpackDir=/var/cluster/sccheck/explorers.0 -Dsccheck.gunzip=/usr/bin/gunzip -Dsccheck.tar=/
    usr/bin/tar -Dsccheck.brief=true -Dsccheck.vverbose=true -Dsccheck.hostlist=aemhrsDV2 -Dsccheck.outputDir=/var/cluster/s
    ccheck/reports.2007-08-10.09:19:37 com.sun.cluster.sccheck.SccheckClient
    sccheck: Requesting explorer data and node report from aemhrsDV2.
    sccheck: aemhrsDV2 error: Connection refused
    sccheck: Unable to run checks on: aemhrsDV2
    typeset -i exitstatus=$?
    + typeset -i exitstatus=107
    # constuct closing message if reports were created
    if ((${exitstatus} > 0)) && ((${exitstatus} < 100)); then
        typeset severity=""
        printf ""
        case "${exitstatus}" in
            1)      severity=$(gettext '1 (LOW)');;
            2)      severity=$(gettext '2 (MODERATE)');;
            3)      severity=$(gettext '3 (HIGH)');;
            4)      severity=$(gettext '4 (CRITICAL)');;
        esac
        printf "$(gettext '%s: One or more checks failed.')\n" ${PROG}
        printf "$(gettext '%s: The greatest severity of all check failures was %s.')\n" ${PROG} "${severity}"
        printf "$(gettext '%s: Reports are in %s.')\n" ${PROG} ${OUTPUTDIR}
    fi
    + (( 107 > 0 ))
    + (( 107 < 100 ))
    cleanup
    + cleanup
    exit ${exitstatus}
    + exit 107

  • Calling a WebServices From Java Stored Proc fails with Connection refused

    I have followed the example in Note:220662.1 on Metalink step by step.
    I am using two windows machines (2000 SP4). I have Oracle 9.2.0.5 EE on one of them and OC4J 9.0.4 standalone on the other(running on JVM 1.4.2_05-b04). The 2 servers "see" each other over the network.
    I can execute the stub from the database machine:
    C:\WebServices\HelloWorld>java HelloWorldImplWSStub
    Hello World - The current time is Sat Aug 21 11:56:20 EDT 2004When running it from the database, I get:
    SQL> select ws_hello_world from dual;
    select ws_hello_world from dual
    ERROR at line 1:
    ORA-29532: Java call terminated by uncaught Java exception: [SOAPException:
    faultCode=SOAP-ENV:IOException; msg=Connection refused;
    targetException=java.net.ConnectException: Connection refused]
    Elapsed: 00:00:21.02The trace file generated on the database server machine looks like:
    [SOAPException: faultCode=SOAP-ENV:IOException; msg=Connection refused; targetException=java.net.ConnectException: Connection refused]
      at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:765)
      at org.apache.soap.rpc.Call.invoke(Call.java:261)
      at HelloWorldImplWSStub.sayHelloWorld(HelloWorldImplWSStub.java:52)Here is the stub code generated using JDeveloper 9.0.5.1:
    import oracle.soap.transport.http.OracleSOAPHTTPConnection;
    import org.apache.soap.encoding.SOAPMappingRegistry;
    import java.net.URL;
    import org.apache.soap.rpc.Call;
    import org.apache.soap.Constants;
    import java.util.Vector;
    import org.apache.soap.rpc.Response;
    import org.apache.soap.rpc.Parameter;
    import org.apache.soap.Fault;
    import org.apache.soap.SOAPException;
    import java.util.Properties;
    public class HelloWorldImplWSStub  {
      public HelloWorldImplWSStub() {
        m_httpConnection = new OracleSOAPHTTPConnection();
        m_smr = new SOAPMappingRegistry();
      public static String endpoint = "http://oc4jsrv:8888/MyWorkarea-OC4J-context-root/HelloWorldImplWS";
      public String getEndpoint() {
        return _endpoint;
      public void setEndpoint(String endpoint) {
        _endpoint = endpoint;
      private static OracleSOAPHTTPConnection m_httpConnection = null;
      private static SOAPMappingRegistry m_smr = null;
      public static String sayHelloWorld() throws Exception {
        String returnVal = null;
        URL endpointURL = new URL(_endpoint);
        Call call = new Call();
        call.setSOAPTransport(m_httpConnection);
        call.setTargetObjectURI("HelloWorldImplWS");
        call.setMethodName("sayHelloWorld");
        call.setEncodingStyleURI(Constants.NS_URI_SOAP_ENC);
        Vector params = new Vector();
        call.setParams(params);
        call.setSOAPMappingRegistry(m_smr);
        Response response = call.invoke(endpointURL, "");
        if (!response.generatedFault()) {
          Parameter result = response.getReturnValue();
          returnVal = (String)result.getValue();
        else {
          Fault fault = response.getFault();
          throw new SOAPException(fault.getFaultCode(), fault.getFaultString());
        return returnVal;
      public void setMaintainSession(boolean maintainSession) {
        m_httpConnection.setMaintainSession(maintainSession);
      public boolean getMaintainSession() {
        return m_httpConnection.getMaintainSession();
      public void setTransportProperties(Properties props) {
        m_httpConnection.setProperties(props);
      public Properties getTransportProperties() {
        return m_httpConnection.getProperties();
       public static void main(String[] argv) throws Exception   {    
        HelloWorldImplWSStub hstub = new HelloWorldImplWSStub();    
        System.out.println(hstub.sayHelloWorld());  
    }The PL/SQL function code:
    CREATE OR REPLACE FUNCTION ws_hello_world RETURN VARCHAR2
    AS LANGUAGE JAVA
    NAME 'HelloWorldImplWSStub.sayHelloWorld() return java.lang.String';Any help would be greatly appreciated.

    Hello,I have the same problem. Did you find any solution to it?
    Thanks. Diego (Argentina)

  • SMD agent not starting correctly FAIL: NIECONN_REFUSED (Connection refused)

    I am getting the following message when I start the agent.  I don't see any errors except for this, and when I try to connect it in agent_adminstration, it never connects.  Just eventually times out after 30 mins.
    FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
    cat jvm_SMDAgent.out
    LoadBalanceRestricted=no
    P4ClassLoad=P4Connection
    SAPDBHOST=
    SAPINFO=SMD_98_server
    SAPMYNAME=ssmsap_SMD_98
    SAPSTARTUP=1
    SAPSYSTEM=98
    SAPSYSTEMNAME=SMD
    application.home=/usr/sap/SMD/exe
    com.ibm.cpu.endian=little
    com.ibm.oti.configuration=scar
    com.ibm.oti.jcl.build=20080922_1143
    com.ibm.oti.vm.bootstrap.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin
    com.ibm.oti.vm.library.version=23
    com.ibm.util.extralibs.properties=
    com.ibm.vm.bitmode=64
    file.encoding=UTF-8
    file.separator=/
    ibm.signalhandling.rs=false
    ibm.signalhandling.sigchain=true
    ibm.signalhandling.sigint=true
    ibm.system.encoding=UTF-8
    j2ee.dbhost=
    java.assistive=ON
    java.awt.fonts=
    java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
    java.awt.printerjob=sun.print.PSPrinterJob
    java.class.path=/usr/sap/SMD/J98/../exe/jstartup.jar:/usr/sap/SMD/J98/../exe/jvmx.jar:../../exe/jstartupapi.jar:../../exe/jstartupimpl.jar:lib/patch_7.01.3.0.20090224123938/launcher/smdagentlauncher.jar
    java.class.version=48.0
    java.compiler=j9jit23
    java.ext.dirs=/opt/IBMJava2-amd64-142/jre/lib/ext
    java.fullversion=J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    J9VM - 20080922_23329_LHdSMr
    JIT  - 20080815_1845_r8
    GC   - 200809_04
    java.home=/opt/IBMJava2-amd64-142/jre
    java.io.tmpdir=/tmp
    java.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/classic:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SMD/exe:/usr/lib:/usr/sap/SMD/exe:/usr/sap/SMD/exe
    java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
    java.runtime.version=2.3
    java.specification.name=Java Platform API Specification
    java.specification.vendor=Sun Microsystems Inc.
    java.specification.version=1.4
    java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
    java.vendor=IBM Corporation
    java.vendor.url=http://www.ibm.com/
    java.version=1.4.2
    java.vm.info=J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    J9VM - 20080922_23329_LHdSMr
    JIT  - 20080815_1845_r8
    GC   - 200809_04
    java.vm.name=IBM J9 VM
    java.vm.specification.name=Java Virtual Machine Specification
    java.vm.specification.vendor=Sun Microsystems Inc.
    java.vm.specification.version=1.0
    java.vm.vendor=IBM Corporation
    java.vm.version=2.3
    jstartup.debuggable=yes
    jstartup.mode=JCONTROL
    jstartup.ownHardwareId=F2143454721
    jstartup.ownProcessId=17393
    jstartup.whoami=server
    jxe.current.romimage.version=9
    jxe.lowest.romimage.version=9
    line.separator=
    memory.manager=256M
    os.arch=amd64
    os.name=Linux
    os.version=2.6.9-89.ELsmp
    path.separator=:
    sun.boot.class.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm/jclSC14/classes.zip:/opt/IBMJava2-amd64-142/jre/lib/core.jar:/opt/IBMJava2-amd64-142/jre/lib/charsets.jar:/opt/IBMJava2-amd64-142/jre/lib/graphics.jar:/opt/IBMJava2-amd64-142/jre/lib/security.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmpkcs.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmorb.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmorbapi.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjcefw.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjssefips.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjgssprovider.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjsseprovider.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjaaslm.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmcertpathprovider.jar:/opt/IBMJava2-amd64-142/jre/lib/server.jar:/opt/IBMJava2-amd64-142/jre/lib/xml.jar
    sun.boot.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin
    sun.io.unicode.encoding=UnicodeLittle
    sun.java2d.fontpath=
    sys.global.dir=/usr/sap/SMD/SYS/global
    user.country=US
    user.dir=/usr/sap/SMD/J98/SMDAgent
    user.home=/home/smdadm
    user.language=en
    user.name=smdadm
    user.timezone=
    user.variant=
    Running SMD Agent ...
    [p4://ssmsap:50004] Agent ready.
    Initialization done.
    cat jvm_SMDAgent.out
    LoadBalanceRestricted=no
    P4ClassLoad=P4Connection
    SAPDBHOST=
    SAPINFO=SMD_98_server
    SAPMYNAME=ssmsap_SMD_98
    SAPSTARTUP=1
    SAPSYSTEM=98
    SAPSYSTEMNAME=SMD
    application.home=/usr/sap/SMD/exe
    com.ibm.cpu.endian=little
    com.ibm.oti.configuration=scar
    com.ibm.oti.jcl.build=20080922_1143
    com.ibm.oti.vm.bootstrap.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin
    com.ibm.oti.vm.library.version=23
    com.ibm.util.extralibs.properties=
    com.ibm.vm.bitmode=64
    file.encoding=UTF-8
    file.separator=/
    ibm.signalhandling.rs=false
    ibm.signalhandling.sigchain=true
    ibm.signalhandling.sigint=true
    ibm.system.encoding=UTF-8
    j2ee.dbhost=
    java.assistive=ON
    java.awt.fonts=
    java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
    java.awt.printerjob=sun.print.PSPrinterJob
    java.class.path=/usr/sap/SMD/J98/../exe/jstartup.jar:/usr/sap/SMD/J98/../exe/jvmx.jar:../../exe/jstartupapi.jar:../../exe/jstartupimpl.jar:lib/patch_7.01.3.0.20090224123938/launcher/smdagentlauncher.jar
    java.class.version=48.0
    java.compiler=j9jit23
    java.ext.dirs=/opt/IBMJava2-amd64-142/jre/lib/ext
    java.fullversion=J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    J9VM - 20080922_23329_LHdSMr
    JIT  - 20080815_1845_r8
    GC   - 200809_04
    java.home=/opt/IBMJava2-amd64-142/jre
    java.io.tmpdir=/tmp
    java.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/classic:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SMD/exe:/usr/lib:/usr/sap/SMD/exe:/usr/sap/SMD/exe
    java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
    java.runtime.version=2.3
    java.specification.name=Java Platform API Specification
    java.specification.vendor=Sun Microsystems Inc.
    java.specification.version=1.4
    java.util.prefs.PreferencesFactory=java.util.prefs.FileSystemPreferencesFactory
    java.vendor=IBM Corporation
    java.vendor.url=http://www.ibm.com/
    java.version=1.4.2
    java.vm.info=J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    J9VM - 20080922_23329_LHdSMr
    JIT  - 20080815_1845_r8
    GC   - 200809_04
    java.vm.name=IBM J9 VM
    java.vm.specification.name=Java Virtual Machine Specification
    java.vm.specification.vendor=Sun Microsystems Inc.
    java.vm.specification.version=1.0
    java.vm.vendor=IBM Corporation
    java.vm.version=2.3
    jstartup.debuggable=yes
    jstartup.mode=JCONTROL
    jstartup.ownHardwareId=F2143454721
    jstartup.ownProcessId=17393
    jstartup.whoami=server
    jxe.current.romimage.version=9
    jxe.lowest.romimage.version=9
    line.separator=
    memory.manager=256M
    os.arch=amd64
    os.name=Linux
    os.version=2.6.9-89.ELsmp
    path.separator=:
    sun.boot.class.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm/jclSC14/classes.zip:/opt/IBMJava2-amd64-142/jre/lib/core.jar:/opt/IBMJava2-amd64-142/jre/lib/charsets.jar:/opt/IBMJava2-amd64-142/jre/lib/graphics.jar:/opt/IBMJava2-amd64-142/jre/lib/security.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmpkcs.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmorb.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmorbapi.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjcefw.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjssefips.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjgssprovider.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjsseprovider.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmjaaslm.jar:/opt/IBMJava2-amd64-142/jre/lib/ibmcertpathprovider.jar:/opt/IBMJava2-amd64-142/jre/lib/server.jar:/opt/IBMJava2-amd64-142/jre/lib/xml.jar
    sun.boot.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin
    sun.io.unicode.encoding=UnicodeLittle
    sun.java2d.fontpath=
    sys.global.dir=/usr/sap/SMD/SYS/global
    user.country=US
    user.dir=/usr/sap/SMD/J98/SMDAgent
    user.home=/home/smdadm
    user.language=en
    user.name=smdadm
    user.timezone=
    user.variant=
    Running SMD Agent ...
    [p4://ssmsap:50004] Agent ready.
    Initialization done.

    cat dev_SMDAgent
    trc file: "/usr/sap/SMD/J98/work/dev_SMDAgent", trc level: 1, release: "701"
    node name   : smdagent
    pid         : 17393
    system name : SMD
    system nr.  : 98
    started at  : Wed Oct  7 08:56:32 2009
    arguments         :
              arg[00] : /usr/sap/SMD/J98/../exe/jlaunch
              arg[01] : pf=/usr/sap/SMD/J98/../SYS/profile/SMD_J98_ssmsap
              arg[02] : -DSAPINFO=SMD_98_server
              arg[03] : pf=/usr/sap/SMD/J98/../SYS/profile/SMD_J98_ssmsap
    JStartupReadInstanceProperties: read instance properties [/usr/sap/SMD/J98/profile/smd.properties]
    -> ms host    :
    -> ms port    : 36
    -> OS libs    : /usr/sap/SMD/exe
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/SMD/J98/profile/smd.properties
    Instance properties
    -> ms host    :
    -> ms port    : 36
    -> os libs    : /usr/sap/SMD/exe
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    Worker nodes
    -> [00] smdagent             : /usr/sap/SMD/J98/profile/smd.properties
    [Thr 182894174624] Wed Oct  7 08:56:32 2009
    [Thr 182894174624] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 182894174624] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 1074792800] JLaunchRequestFunc: Thread 1074792800 started as listener thread for np messages.
    [Thr 1085282656] WaitSyncSemThread: Thread 1085282656 started as semaphore monitor thread.
    [Thr 182894174624] SigISetDefaultAction : default handling for signal 17
    [Thr 182894174624] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
    [Thr 182894174624] CPIC (version=701.2009.01.26)
    [Thr 182894174624] [Node: SMDAgent] java home is set by profile parameter
            Java Home: /opt/IBMJava2-amd64-142
    [Thr 182894174624] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/SMD/J98/../exe/jvmx.jar
    JStartupIReadSection: read node properties [smdagent]
    -> node name          : SMDAgent
    -> node type          : server
    -> node id            : 1
    -> node execute       : yes
    -> java path          : /opt/IBMJava2-amd64-142
    -> java parameters    : -DP4ClassLoad=P4Connection -Xj9 -Xmn50m -Xgcpolicy:gencon
    -> java vm version    : J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    -> java vm vendor     : IBM J9 VM (IBM Corporation)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 256M
    -> init heap size     : 256M
    -> root path          : ../SMDAgent
    -> class path         : ../../exe/jstartupapi.jar:../../exe/jstartupimpl.jar:lib/patch_7.01.3.0.20090224123938/launcher/smdagentlauncher.jar
    -> OS libs path       : /usr/sap/SMD/exe
    -> main class         : com.sap.smd.agent.launcher.SMDAgentLauncher
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : /usr/sap/SMD/J98/../exe/jstartup.jar:/usr/sap/SMD/J98/../exe/jvmx.jar
    -> parameters         : run jcontrol
    -> debuggable         : yes
    -> debug mode         : no
    -> debug port         : 58981
    -> shutdown timeout   : 20000
    [Thr 182894174624] JLaunchISetDebugMode: set debug mode [no]
    [Thr 1086335328] JLaunchIStartFunc: Thread 1086335328 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
    -> stack   : 1048576 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -DP4ClassLoad=P4Connection
    -> arg[  4]: -Xj9
    -> arg[  5]: -Xmn50m
    -> arg[  6]: -Xgcpolicy:gencon
    -> arg[  7]: -Dsys.global.dir=/usr/sap/SMD/SYS/global
    -> arg[  8]: -Dapplication.home=/usr/sap/SMD/exe
    -> arg[  9]: -Djava.class.path=/usr/sap/SMD/J98/../exe/jstartup.jar:/usr/sap/SMD/J98/../exe/jvmx.jar:../../exe/jstartupapi.jar:../../exe/jstartupimpl.jar:lib/patch_7.01.3.0.20090224123938/launcher/smdagentlauncher.jar
    -> arg[ 10]: -Djava.library.path=/opt/IBMJava2-amd64-142/jre/bin/j9vm:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin:/opt/IBMJava2-amd64-142/jre/bin/classic:/opt/IBMJava2-amd64-142/jre/bin:/usr/sap/SMD/exe:/usr/lib:/usr/sap/SMD/exe:/usr/sap/SMD/exe
    -> arg[ 11]: -Dmemory.manager=256M
    -> arg[ 12]: -Xmx256M
    -> arg[ 13]: -Xms256M
    -> arg[ 14]: -DLoadBalanceRestricted=no
    -> arg[ 15]: -Djstartup.mode=JCONTROL
    -> arg[ 16]: -Djstartup.ownProcessId=17393
    -> arg[ 17]: -Djstartup.ownHardwareId=F2143454721
    -> arg[ 18]: -Djstartup.whoami=server
    -> arg[ 19]: -Djstartup.debuggable=yes
    -> arg[ 20]: -DSAPINFO=SMD_98_server
    -> arg[ 21]: -DSAPSTARTUP=1
    -> arg[ 22]: -DSAPSYSTEM=98
    -> arg[ 23]: -DSAPSYSTEMNAME=SMD
    -> arg[ 24]: -DSAPMYNAME=ssmsap_SMD_98
    -> arg[ 25]: -DSAPDBHOST=
    -> arg[ 26]: -Dj2ee.dbhost=
    [Thr 1086335328] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
    -> arg[  0]: run
    -> arg[  1]: jcontrol
    [Thr 1086335328] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 1086335328] Wed Oct  7 08:56:35 2009
    [Thr 1086335328] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
    [Thr 1086335328] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 1086335328] Wed Oct  7 08:56:38 2009
    [Thr 1086335328] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    [Thr 1086335328] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
    [Thr 1101334880] Wed Oct  7 08:56:43 2009
    [Thr 1101334880] JLaunchISetState: change state from [Running (3)] to [Starting applications (10)]
    [Thr 1101334880] Wed Oct  7 08:56:48 2009
    [Thr 1101334880] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]

  • BIPCatalogUtil extraction always fails with "Connection timed out"

    BIPCatalogUtil extraction always fails with "Connection timed out".
    Any suggestions on what could be the issue?

    One thought was that perhaps it was timing out going out some unused port (e.g., the Airport port), but a list shows only the Ethernet port is enabled:
    admin$ sudo networksetup -listallnetworkservices
    An asterisk (*) denotes that a network service is disabled.
    Built-in Ethernet
    *AirPort
    *Built-in FireWire
    *Bluetooth

  • Connect to message server host failed;WSAECONNREFUSED: Connection refused

    Hi All,
    I am getting the following error when I tried to test the system connectivity from the portal to NSP instance.
    Connection failed. Make sure that Single Sign-On is configured correctly
    I found the following entry in the logs
    Error> occured  >Wed Feb 03 22:43:49,875<   
    RfcException:
        message: Connect to message server host failed
    Connect_PM  TYPE=B MSHOST=abchome.abcsap.local GROUP=SPACE R3NAME=NSP MSSERV=sapmsNSP PCS=1
    ERROR       partner '192.xxx.xxx.123:sapmsNSP' not reached
    TIME        Wed Feb 03 22:43:49 2010
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2823
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       10061
    ERRNO TEXT  WSAECONNREFUSED: Connection refused
    COUNTER     1
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    Both NSP and J2E instances are on the same server. OS - win2k3.
    I checked the services file and have the sapmsNSP entry.
    I am able to launch an SAP transaction from System Administration -> Support
    RZ70 from NSP also fails JCo error. SLD_UC RFC itself works fine and the JCo RFC provider SLD_UC program is running
    WEB AS & ITS connections work fine.
    User authentication is from backend, NSP.
    I think I have gone thru all the logs but could not resolve the issue.
    I appreciate any help on this,
    Victor

    I tried to go thru the thread. I did not find any clue as why only server connectivity is failing. ABAP trial version is running fine and the NW trial version is working fine too. These run without crashing. I did a lot of customizing on the portal but dont see any issues except the System Connectivity. Like I mentioned I did UME configuration to point to NSP ABAP instance and I can log into the portal with user credentials that I use to login to ABAP.  I can launch webgui etc without any issues.

  • Netbean Oracle : Problem with connection refused

    Hi, Im currently using Netbean to develop a system in JSP. I already succeed to connect to Oracle 11g. However, I'm facing problem connection refused. It always happen.
    For the server, I using GlassFish Server 3.1
    Any one have idea to solve this problem? Thanks in advances.
    Detail of the error:
    WARNING: StandardWrapperValve[jsp]: PWC1406: Servlet.service() for servlet jsp threw exception
    java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=186646784)(ERR=12519)(ERROR_STACK=(ERROR=(CODE=12519)(EMFI=4))))
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:333)
         at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:404)
         at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
         at java.sql.DriverManager.getConnection(DriverManager.java:579)
         at java.sql.DriverManager.getConnection(DriverManager.java:221)
         at dbConnection.dbConnection.connectEasy(dbConnection.java:66)
         at org.apache.jsp.Boundary.insertStudForm_jsp._jspService(insertStudForm_jsp.java:783)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:403)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:492)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:378)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
         at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1539)
         at org.apache.catalina.core.ApplicationDispatcher.doInvoke(ApplicationDispatcher.java:787)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:649)
         at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:604)
         at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:534)
         at org.apache.jasper.runtime.JspRuntimeLibrary.include(JspRuntimeLibrary.java:1015)
         at org.apache.jsp.index_jsp._jspService(index_jsp.java:462)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:403)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:492)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:378)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
         at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1539)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:281)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:655)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:595)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:98)
         at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:91)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:162)
         at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:330)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:231)
         at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:174)
         at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:828)
         at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:725)
         at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1019)
         at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:225)
         at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)
         at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)
         at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)
         at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)
         at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)
         at com.sun.grizzly.ContextTask.run(ContextTask.java:71)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:532)
         at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:513)
         at java.lang.Thread.run(Thread.java:722)

    user8963384 wrote:
    I already run the sql that you ask, this is the result
    RESOURCE_NAME     CURRENT_UTILIZATION     MAX_UTILIZATION     INITIAL_ALLOCATION     LIMIT_VALUE
    processes     26     150     150     150
    sessions     30     154     248     248
    This my function I use to connect to database
    public class dbConnection {
    public Connection conn=null;
    public String id="Se";
    public String password="See";
    public dbConnection(){
    public dbConnection (String id, String password){
    this.id=id;
    this.password=password;
    public void connect(){
    try{
    //load driver
    String driverName="oracle.jdbc.driver.OracleDriver";
    Class.forName(driverName);
    //Create connection
    String serverName = "localhost";
    Is it the same server on which db is running. Better put servername or IP for serverName above.
    String portNumber = "1521";
    String sid = "DEGREE";
    String url = "jdbc:oracle:thin:@" + serverName + ":" + portNumber + ":" + sid;
    System.out.println("url: " + url);
    conn = DriverManager.getConnection(url,id,password);
    }Can you try id/[email protected](DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = DEGREE))) from sql prompt and post the result.
    catch(ClassNotFoundException e){
    System.out.println("ClassNotFoundException: " + e.getMessage());
    catch(SQLException e){
    System.out.println("SQLException: " + e.getMessage());
    while((e = e.getNextException()) != null)
    System.out.println(e.getMessage());
    }Everything goes OK, then download latest driver from oracle corporation and try again. A code sample can be found at http://www.orafaq.com/wiki/JDBC.
    Regards
    Virendra
    Edited by: Virendra.k.Yadav on Oct 18, 2011 11:26 PM

  • Restore default isolation level fails with connection in pool

    Hi,
    I am developing an application that needs to set the TransactionIsolation to SERIALIZE for a transaction. Setting the TransactionIsolation is not the problem. After this transaction is committed or rolled back, i set the isolation level back to the default i saved before.
    The code gets executed and throws no exception. The connection i used is released into the pool. The next time i get this connection from the pool the isolation level is already SERIALIZE. This is not what i wanted to achieve.
    It has to be possible to change the isolation level for transaction, isn´t it?
    Here is the code, that i use. The ConnectionManager gets the connection from a connection pool i configured in the jdbc connector service. Excep for this issue any other operation works fine.
                    ConnectionManager connectionManager = new ConnectionManager();
              Connection con = null;
              int transactionIsolationLevel = 0;
              Queue queue = null;
              List list = null;
              try {
                   con = connectionManager.getConnection();
                   transactionIsolationLevel = con.getTransactionIsolation();
                   if( logger.isInfoEnabled())
                        logger.info(LOGLOC + "ISOLATION_LEVEL default: " + transactionIsolationLevel);
                   // auskommentiert für RE
                   con.setTransactionIsolation( Connection.TRANSACTION_SERIALIZABLE );
                   con.setAutoCommit( false );
              QueueManager queueManager = new QueueManager();
              list = queueManager.GetQueueEntriesBySizeGroups( con, small, medium, large, serverNode );
              con.commit();
              } catch (ClassNotFoundException cnfe) {
                   logger.error(LOGLOC + "Exception setting up transaction context for queue service!", cnfe);
                   handleExceptions(queue, cnfe);
                   try {
                        con.rollback();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception rolling back transaction!", e);               
              } catch (SQLException sqle) {
                   logger.error(LOGLOC + "Exception setting up transaction context for queue service!", sqle);
                   handleExceptions(queue, sqle);
                   try {
                        con.rollback();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception rolling back transaction!", e);               
              } catch (QueueManagerException qme) {
                   logger.error(LOGLOC + "Exception executing queue manager!", qme);
                   handleExceptions(queue, qme);
                   try {
                        con.rollback();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception rolling back transaction!", e);               
              } finally {
                   try {
                        con.setAutoCommit(true);
                        if( logger.isInfoEnabled())
                             logger.info(LOGLOC + "ISOLATION_LEVEL before setting default: " + con.getTransactionIsolation() + " now setting: " + transactionIsolationLevel );
                        // Auskommentiert für RE
                        con.setTransactionIsolation( transactionIsolationLevel );
                        con.close();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception setting up transaction context for queue service!", e);               
    The datasource is a simple jdbc1.x Oracle Datasource with no special settings.
    In a remote debugging session i saw, that the wrapped Connection from the datasource sets the txLevel successfully, But the underlying T4Connection does not get this isolation level. Could this be a bug?
    Any hints, solutions?

    Hi,
    I am developing an application that needs to set the TransactionIsolation to SERIALIZE for a transaction. Setting the TransactionIsolation is not the problem. After this transaction is committed or rolled back, i set the isolation level back to the default i saved before.
    The code gets executed and throws no exception. The connection i used is released into the pool. The next time i get this connection from the pool the isolation level is already SERIALIZE. This is not what i wanted to achieve.
    It has to be possible to change the isolation level for transaction, isn´t it?
    Here is the code, that i use. The ConnectionManager gets the connection from a connection pool i configured in the jdbc connector service. Excep for this issue any other operation works fine.
                    ConnectionManager connectionManager = new ConnectionManager();
              Connection con = null;
              int transactionIsolationLevel = 0;
              Queue queue = null;
              List list = null;
              try {
                   con = connectionManager.getConnection();
                   transactionIsolationLevel = con.getTransactionIsolation();
                   if( logger.isInfoEnabled())
                        logger.info(LOGLOC + "ISOLATION_LEVEL default: " + transactionIsolationLevel);
                   // auskommentiert für RE
                   con.setTransactionIsolation( Connection.TRANSACTION_SERIALIZABLE );
                   con.setAutoCommit( false );
              QueueManager queueManager = new QueueManager();
              list = queueManager.GetQueueEntriesBySizeGroups( con, small, medium, large, serverNode );
              con.commit();
              } catch (ClassNotFoundException cnfe) {
                   logger.error(LOGLOC + "Exception setting up transaction context for queue service!", cnfe);
                   handleExceptions(queue, cnfe);
                   try {
                        con.rollback();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception rolling back transaction!", e);               
              } catch (SQLException sqle) {
                   logger.error(LOGLOC + "Exception setting up transaction context for queue service!", sqle);
                   handleExceptions(queue, sqle);
                   try {
                        con.rollback();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception rolling back transaction!", e);               
              } catch (QueueManagerException qme) {
                   logger.error(LOGLOC + "Exception executing queue manager!", qme);
                   handleExceptions(queue, qme);
                   try {
                        con.rollback();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception rolling back transaction!", e);               
              } finally {
                   try {
                        con.setAutoCommit(true);
                        if( logger.isInfoEnabled())
                             logger.info(LOGLOC + "ISOLATION_LEVEL before setting default: " + con.getTransactionIsolation() + " now setting: " + transactionIsolationLevel );
                        // Auskommentiert für RE
                        con.setTransactionIsolation( transactionIsolationLevel );
                        con.close();
                   } catch (SQLException e) {
                        logger.error(LOGLOC + "Exception setting up transaction context for queue service!", e);               
    The datasource is a simple jdbc1.x Oracle Datasource with no special settings.
    In a remote debugging session i saw, that the wrapped Connection from the datasource sets the txLevel successfully, But the underlying T4Connection does not get this isolation level. Could this be a bug?
    Any hints, solutions?

  • Uploading app package keeps on failing with : Connection interrupted, trying to reconnect

    For almost a week now I have suffered this error.
    The package is rather large (12MB) yet, I successfully uploaded larger files to youtube yesterday so, it can't be my internet connection.
    Any solutions ?
    Can we upload packages another way ? through dropbox for example and then import it ?

    Hey Mostafa,
    Thank you for the question. The only was to submit an app for certification is through your developer dashboard, so the dropbox idea is not feasible. I believe this could stem from your internet provider, or your system itself, but I could not guess beyond
    that as it is all system/case specific. 
    If possible, try the steps below and let us know what your results are. 
    Attempt the upload from a different internet connection
    Attempt the upload from a different system.
    Make sure your are using Internet Explorer 9 or higher.(It is not required, but our tools are designed for that browser)
    Clear your system cache, and restart
    I am sorry you are having problems with the upload. No system concerns on our end, so I hope these steps prove fruitful for you. Thanks again for the post!
    - Robert

  • Connection refused error running JSP on Jdev 10.1.3.0.3.3412 with MySL 5.0

    Hello,
    I'm using Jdeveloper 10.1.3.0.3.3412 on a Mac with a MySQL database. In Jdeveloper i can make a connection to the database and create adf business components
    I've made a JSP page with ADF on a single table. No errors when compiling. When I try to run the JSP Page using Embedded OC4J (on Mac OSX Tiger) I get the error:
    5/12/09 00:45:50 java.net.ConnectException: Connection refused
    05/12/09 00:45:50      at java.net.PlainSocketImpl.socketConnect(Native Method)
    05/12/09 00:45:50      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    05/12/09 00:45:50      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    05/12/09 00:45:50      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    05/12/09 00:45:50      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:428)
    05/12/09 00:45:50      at java.net.Socket.connect(Socket.java:507)
    05/12/09 00:45:50      at java.net.Socket.connect(Socket.java:457)
    05/12/09 00:45:50      at java.net.Socket.<init>(Socket.java:365)
    05/12/09 00:45:50      at java.net.Socket.<init>(Socket.java:207)
    05/12/09 00:45:50      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.sendMessage(Oc4jNotifier.java:98)
    05/12/09 00:45:50      at oracle.jdevimpl.runner.oc4j.Oc4jNotifier.postInitApplicationServer(Oc4jNotifier.java:55)
    05/12/09 00:45:50      at com.evermind.server.ApplicationServer.serverExtensionPostInit(ApplicationServer.java:1041)
    05/12/09 00:45:50      at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:927)
    05/12/09 00:45:50      at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:98)
    05/12/09 00:45:50      at java.lang.Thread.run(Thread.java:613)
    What am I doing wrong? The embedded OC4J library is added to the project. I've tried to use the javac compiler. It looks like the OC4J instance cannot make a connection to the db.
    Thanks,
    Martin

    Hello
    I've added the connection to the web.xml, but still get the same error.
    When I go to embedded OC4J preferences and change the JNDI-names of the datasources (global and current-workspace) to the same name (this was default), i get this error message:
    9-dec-2005 9:30:09 com.evermind.server.ApplicationStateRunning initNativeDataSource
    SEVERE: Error creating native data source. The location 'jdbc/MySQLConnectionCoreDS' is already in use.
    05/12/09 09:30:09 Application: current-workspace-app is in state FAILED
    05/12/09 09:30:09 Error instantiating application 'current-workspace-app' at file:/Users/martinsuijs/jdevhome/mywork/myWorldApp/myWorldApp-oc4j-app.xml: Error creating native data source. The location 'jdbc/MySQLConnectionCoreDS' is already in use.
    05/12/09 09:30:14 java.net.ConnectException: Connection refused
    grtz
    Martin

  • RFC logon failed with message: Failed: Connect to SAP  gateway failed

    I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could  be the reason for this. Is there any fix or workaround to continue the install.
    INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
              CAbRfcImpl::setRfcConnectParam
    RFC parameter ASHOST set to value hostSAP.
    INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
              CAbRfcImpl::setRfcConnectParam
    RFC parameter SYSNR set to value 09.
    INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
              CAbRfcImpl::checkConnectInfo
    RFC connection information checked successfully.
    ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
              CAbRfcImpl::openRfcConn
    FRF-00007  Unable to open RFC connection.
    ERROR      2006-09-16 01:13:02
              CJSlibModule::writeError_impl()
    FRF-00063  RFC logon failed with message: Failed: Connect to SAP  gateway failed
    Connect_PM  GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner not reached (host hostSAP, service 3309)
    TIME        Sat Sep 16 01:13:02 2006
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -10
    MODULE      nixxi_r_mt.cpp
    LINE        8528
    DETAIL      NiPConnect
    SYSTEM CALL connect
    ERRNO       146
    ERRNO TEXT  Connection refused
    COUNTER     4
    Thanks,
    Ram

    at the end of the database instance installation SAPInst is doing some RFCs to the CI.
    The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
    Please check if you have started the central instance on this machine.
    peter

  • Grid installtion failing with error  Cannot connect to Node Manager. : Conf

    I am trying to install Grid, however its failing with following error
    I installed Weblogic server 10.3.4 and 11g R2 database
    ==============================================================
    Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
    Use dumpStack() to view the full stacktrace
    Thu Mar 03 21:49:03 IST 2011
    <traceback object at 1>
    Connecting to Node Manager ...
    This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
    Thu Mar 03 21:49:03 IST 2011
    SEVERE: Exception: during stop of admin server
    Thu Mar 03 21:49:03 IST 2011
    Name of Exception: main.WLSTException
    Thu Mar 03 21:49:03 IST 2011
    Code of Exception: Error occured while performing nmConnect : Cannot connect to Node Manager. : Configuration error while reading domain directory
    Use dumpStack() to view the full stacktrace
    Thu Mar 03 21:49:03 IST 2011
    <traceback object at 2>
    Connecting to Node Manager ...
    This Exception occurred at Thu Mar 03 21:49:03 IST 2011.
    Thu Mar 03 21:49:03 IST 2011
    Node Manager is not running
    Mar 3, 2011 9:49:03 PM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
    INFO: error messages of the command :
    weblogic.nodemanager.NMException: Configuration error while reading domain directory
    at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:301)
    at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
    at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:249)
    at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:200)
    at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:206)
    at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:53)
    at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:179)
    at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:173)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(Unknown Source)
    at org.python.core.PyMethod.__call__(Unknown Source)
    at org.python.core.PyObject.__call__(Unknown Source)
    at org.python.core.PyObject.invoke(Unknown Source)
    at org.python.pycode._pyx2.nmConnect$3(<iostream>:118)
    at org.python.pycode._pyx2.call_function(<iostream>)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyFunction.__call__(Unknown Source)
    at org.python.core.PyObject.__call__(Unknown Source)
    at org.python.pycode._pyx41.stopManagedServer$6(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py:142)
    at org.python.pycode._pyx41.call_function(/u02/oracle/Oracle/Middleware/oms11g/sysman/omsca/scripts/wls/start_server.py)
    at org.python.core.PyTableCode.call(Unknown Source)

    I am still getting error, even after installing Weblogic server 10.3.2
    ar 4, 2011 10:44:42 AM oracle.sysman.omsca.util.CoreOMSConfigAssistantUtil execCommand
    INFO: error messages of the command :
    weblogic.nodemanager.NMConnectException: Connection refused. Could not connect to NodeManager. Check that it is running at node1.slksoft.com:7,403.
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    at java.net.Socket.connect(Socket.java:525)
    at weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38)
    at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227)
    at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
    at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
    at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
    at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
    at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(Unknown Source)
    at org.python.core.PyMethod.__call__(Unknown Source)
    at org.python.core.PyObject.__call__(Unknown Source)
    at org.python.core.PyObject.invoke(Unknown Source)
    and also i am getting below error.
    [email protected] grid]$ export ORACLE_SID=prod
    [[email protected] grid]$ emctl status agent
    EM Configuration issue. /u01/oracle/product/11.2.0/db_1/node1.soft.com_prod not found.
    [[email protected] grid]$

  • Connection refused: proxy: HTTP: attempt to connect to failed [error] ap_proxy_connect_backend disabling worker

    Hi all,
    I'm investigating cause of a wedged wiki this morning. The MacMini (10.7.5) was working well for the last year but we're not sure when it gave up the ghost.
    I've already applied the fixes detailed at Mac OS X v10.5, Mac OS X Server v10.5: Web, Mail, Wiki, Personal Web Sharing, Parental Controls services may not start after restoring a Time Machine backup but it has't helped.
    The error we see when we visit the top level of the server is:
    Service Temporarily Unavailable
    The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
    Apache/2.2.22 (Unix) PHP/5.3.15 with Suhosin-Patch mod_ssl/2.2.22 OpenSSL/0.9.8r DAV/2 Server at sacmini.local Port 80
    The message in the httpd error logs is:
    Connection refused: proxy: HTTP: attempt to connect to failed [error] ap_proxy_connect_backend disabling worker
    Let me know if you have any ideas.  Thank you.
    --Athonia

    Thanks for the reply.
    So, there were some Ruby related log file entries. Do these have any meaning to you?  I'm checking to see what collabcored2 does exactly.
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /usr/share/collabd/coreclient/config/environment.rb:11
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `gem_original_require'
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rubygem s/custom_require.rb:31:in `require'
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /usr/share/collabd/coreclient/config.ru:13
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /Library/Ruby/Gems/1.8/gems/rack-1.2.1/lib/rack/builder.rb:46:in `instance_eval'
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /Library/Ruby/Gems/1.8/gems/rack-1.2.1/lib/rack/builder.rb:46:in `initialize'
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /usr/share/collabd/coreclient/config.ru:1:in `new'
    May  7 14:22:33 sacmini com.apple.collabcored2[22106]:
    from /usr/share/collabd/coreclient/config.ru:1
    May  7 14:22:33 sacmini com.apple.launchd[1] (com.apple.collabcored2[22106]): Exited with code: 1
    May  7 14:22:33 sacmini com.apple.launchd[1] (com.apple.collabcored2): Throttling respawn: Will start in 9 seconds

  • RFC connection (SM59) fails with load balancing enabled.

    Hello All,
    We have an RFC connection setup between two SAP systems. The RFC connection works fine if it points to the destination system. But if we enable load balancing, the connection fails with this error:
    ERROR                partner not reached (host <hostname>, service sapms<SID>)
    LOCATION             SAP-Server <source system> on host <host name of source> (wp 1)
    DETAIL               NiPConnect2
    CALL                 SO_ERROR
    COMPONENT            NI (network interface)
    COUNTER              3027
    ERROR TEXT           Connection refused
    ERROR NUMBER         79
    MODULE               niuxi.c
    LINE                 1069
    RETURN CODE          -10
    SUBRC                    0
    RELEASE              46D
    TIME                 Mon Aug 18 18:33:30 2008
    VERSION              34
    I've checked the /etc/services file, the following entries exist
    sapms<SID> 3606/tcp
    sapms<SID>s 3600/tcp
    lstst at the source system works fine
    lgtst -H <target host name> -S sapms<SID>
    niping at the target system has a problem
    > niping -c -S 3606
    Mon Aug 18 10:23:14 2008
    connect to server o.k.
    ERROR => NiTClientLoop: NiTReadLoop (rc=-6) [nixxtst.cpp  2629]
    ERROR       connection to partner broken
    TIME        Mon Aug 18 10:23:14 2008
    RELEASE     640
    COMPONENT   NI (network interface)
    VERSION     37
    RC          -6
    MODULE      niuxi.c
    LINE        905
    DETAIL      NiPRead (0.0.0.0/0, hdl 1)
    SYSTEM CALL recv
    COUNTER     1
    Please help me figure out the problem.
    regards,
    Roshni

    Hi,
    I think you have added wrong port entry in services file.
    The entry of sap servers in services file for load balancing are
    sapms<SID>  36<instance number>/tcp
    so please check once again and add the entry using above formula in services file.
    Also add the entry of all SAP servers in your hosts file.
    <IP> <HOSTNAME>

Maybe you are looking for

  • Premiere Elements 8 and crashes

    Question:  I have tried all the Adobe recommended fixes due to my NVidia graphics card but my project still regularly crashes and now as soon as it starts loading the elements, it crashes with no error message. System:  Windows 7 Professional (x64) (

  • How to print from Macbook Pro on a Cannon MP610 printer?

    I have recently bought a Macbook Pro, and I have a wireless network set up at home. I have no problems connecting to the internet or the network. But I can't seem to access the printer. I have a Cannon MP610 Printer. This printer is connected to the

  • Downloading and Installing a Full Solution Driver in Windows 8 Using a Wireless Connection

    Learn how to download a full solution driver for your printer from HP's website and install it using a wireless connection. The full solution driver provides you with all the tools and software needed to use all of the printer's intended functions. T

  • Email the Output of Report under HTML Format instead of .eps

    Hi to all I having Developer 6.0.5.0.2. I want to send an email from report (Using Lotus Notes email client) as an HTML attachment. Could any one guide me how to do that? null

  • Deleting Old Emails In Mail

    I have a huge archive of emails from 2001 to 2004 stored in Mail which I can now safely delete to free up some space. How can I delete these old emails in 'lumps' rather than laboriously delete them one by one?