Optimizing iTunes Sluggish Performance/Large Library...

Is there any way to get better performance out of sluggish iTunes when it has a large library of 100+gigs? Everything is moving as slow as molasses. Even when updating/correcting text on song files. Could one use or create two libraries to optimize iTunes performance?

Similar Messages

Beachball in itunes due to large library?

I got a Mac Pro and recently bought a 3 TB drive that I put inside it for the single purpose of being a itunes drive. I copied over songs, movies and tv-shows. But now when I try to access itunes I get the beachball for 30 sec or so before I can do anything. I got 10 gb ram, and I have the computer on and itunes on 24/7 almost.
Do I get the problem because of the disk? or because my library is large?

Hi,
As gar as you storage is concern how are you using the drive, is it a individual drive or set of drives.
Individual Drive
RAID 1
RAID 0
Performance might vary according to the read/write capabilities of your music drive.
Please let us know how is your drives on MacPro configured

Itunes management of large library

I would like to use itunes to manage my media library (16,000+ files on a network share). However, I'm finding it frustrating to add new files, and to make sure that all my files are imported.
I would let itunes manage the library, but I don't like the way it names files and I can't seem to find a way to change it (I want Artist - Album - # - Title.mp3 format, subdir'd into \artist\album\ tree. Itunes just uses ##-title.mp3, not good enough for me)
If I get a lot of new files at once, I don't want to have to manually drag & drop folders one-at-a-time into the itunes window and wait while it does a bunch of stuff I don't care about (gapless playback, etc.).
I want a way to fire off a process that will find new files and import them in the background. I don't want iTunes to have to rescan the whole filesystem, or to have to rebuild the library using i.e. Libra every time I want to add files.
Any ideas?

fnorgby,
iTunes' music library management is horrible, imo..
there's no "watch folders" function that you have in winamp, and any time you
make any changes to file names/folder structures in the library, you're pretty
much screwed unless you remove the files from the library and then re-add them.
I've found it best to add the folders to the library (you can add the top folder
of the directory tree)... and then leave them alone as much as possible!
This suhks, because I rely alot on the libraries capability to track the number
of times that a track has been played, when it was added etc etc..
if you remove the tracks, when you re-add them the history is cleared
I've had much heartache with this "feature" ie bug.. i'm hoping future releases will have a "monitor added folders for changes" feature or something similar.
Any help from a guru who has a script to solve this?
Message was edited by: madAndroid

ITunes Extremely Slow with large library

I recently inherited a huge amount of music (36,000 tracks/211 gigs) which I keep on a Time Capsule as an external drive connect to an Airport Express which I use as a bridge to my home stereo. iTunes is pointed to the TC as the music source and there is no music content on my Macbook's HD, only the iTunes library itself and the cover art. I believe I have the standard RAM (black Macbook, purchased June 2007, which I think is 1gig).
iTunes is not extremely slow in cover flow, I get constant spinning balls and it takes quite a while for the program to close. Do I need more RAM (I think there is a 2gig max for my Macbook)? Is 36,000 tracks more than iTunes was designed to handle? Any chance storing the content on an external drive via WiFi affects the iTunes library response?

I haven't had experience with newer Intel macs with this issue, so I'm a bit hesitant to try to answer, but here goes. This may not at ALL apply to what you're dealing with.
The problem of incredibly slow behavior with large libraries in iTunes has been an issue since at LEAST 7.0 if not much earlier. I have over 130,000 tracks in my library, stored on a WD 1TB studio drive connected to my "home media server - a G4 Cube" via firewire and shared over ethernet to 3 macs. Do a search for "slow large library" in these forums and you will see NUMEROUS threads all complaining about various issues people seem to have when the number of tracks gets into the tens of thousands, much less over 100k.
In any case, there are some things I've found that seem to help:
1. Keep the actual library (database) files on boot drive. IF you have the music files on a separate drive, it helps to keep the iTunes Library folder on the internal drive with the coverart where it can be accessed faster. This is the database (xml) file that iTunes loads and saves when changes are made to the tags or tracks.
2. Also, if you've not got a lot of playlists to worry about saving (i don't use playlists much, just play cds out of the browser mostly, or have some smart playlists).. it helps to rebuild the iTunes library from scratch at some point. I have no reason to believe this, but I assume it creates a new optimized database this way. (maybe someone can correct me on this... after say months of retagging tracks, playing music, creating and deleting playlists etc... does the database end up 'messier' OR does it correctly rewrite everything and optimize constantly or when you quit itunes?) What I DO know is that if you shorten the path to the music, it will be a smaller file. So don't make it "My Firewire Drive/Music Files/iTunes Files/CDs and MP3s/By Artists/*" this gets written as the path for EACH track in the library file that it then needs to load. Make it "Music/Artists/*" or something as short as you can. Then, what I did was to set iTunes to NOT copy music to the library folder, and starting with a blank iTunes dragged the icon of my shared music folder containing all the mp3 files into the iTunes window. It took overnight and the better part of the next day to read in all 130k files, copy the embedded coverart to the local folder, and the longest part, "determining gapless playback" --which i wish they'd give us a way to disable, takes forever! and i dont' use it (if anyone knows how to stop gapless scanning on a mac, let us know)... but fortunately you only have to do this once.
3. More RAM. My main computer is an MDD Dual 1ghz G4. Until about a month ago I had a gig of ram, then I finally got around to upgrading to 2 gigs. It DEFINATELY made a big difference. Where before I'd see the rainbow ball for 30 seconds whenever I made playlists or changes to tags.. now I often don't see it at all, or certainly much less.
I read not long ago an article talking about WHY iTunes was so bad at scaling up for larger libraries. The author suggested it was due to the library being saved out in an XML database and that unless Apple changes its backend to iTunes, it will not be possible to squeeze much more performance out of it. This probably makes it useless for DJs, radio stations, classical music lovers or anyone with large collections of music with many tracks. I assumed that at some point we'd see Apple rewrite iTunes to take advantage of the SQL database in the OS level, but who knows. I really don't think I understand database stuff at this level.
**Finally... I HAVE noticed that recently it has seemed to be getting more responsive. On one of my other machines (an iMac 800mhz g4!) running iTunes used to be a frustrating proposition with constant spinning beachballs and hangs before it let you pick music or change tracks. Now its actually usable. I don't know when this got 'better' but I think with either 7.6, 7.6.1 or 7.6.2 they have done something to make it more responsive. At least in my experience. So thats a good development.
But seriously.. do a search thru the forums and you'll find a lot more about this problem with large libraries.
Goodluck.

Managing a large library: replacing a single media-filled hard drive; Drobo and iTunes?

Hi! To begin with, thank you for your time in reading my query... I am finding out that I am unique in having an iTunes library as large as mine: it is presently approximately 11Tb, spanning over 4x2TB and 1x3TB drives (5 drives total). I have over the course of the last 8-9 years been digitalizing and converting an extensive cd/dvd collection (with the intent of packing them all away into storage). The library is organized via iTunes Media Folder organization, and new items are copied into the media files: when one hard drive becomes full, I simply change the location to a new drive. This has worked well and have only had one challenge to date: when I moved from a PC to Mac, but I (or more accurately the library) survived the ordeal...!
How do I replace one hard drive and have iTunes still find the media? I am beginning to feel a bit queasy about one of the earlier hard drives, and feel it is about time to replace it with a new one. I have NO idea, however, on the easiest way to do this... consolidating library won't work as it would want to move the entire 11TB of media... moving via Finder the media to a new source and then dragging to the library simply doubles the entries in iTunes... deleting the files in iTunes and adding again from new source would lose all play counts, metadata... years of careful tagging and album art additions lost (not even remotely optional!). I think I could call myself somewhat an "advanced user" in iTunes, playing around with scripts, etc, and I feel like the solution is staring me straight in the face... but for the life of me I can't figure this one out!!!
Moving media to a Drobo? An aside (oh, call it question part II...!), I'm considering moving to a Drobo 4-bay ( http://www.drobo.com/products/drobo.php ) for the media library: presently I have each media hard drive backed up to another hard drive, but it is anything but frequent... or a simple task... and I like the level of security and ease of use the Drobo claims. I of course would still need to split the media library over 2 Drobo's... feedback on any experience with using Drobo's with iTunes?
All suggestions welcomed!

Funny Monkey wrote:
...if I highlight just one album within iTunes and then "consolidate library", it will move ONLY that one album to the new location (as determined by the location listed within my advanced settings)? Seriously?!!!
yes.
for such a small task, you could also use this script:
Re-Locate Selected v1.1
This script will re-locate the files of the selected iTunes tracks from their current location to a new user-chosen folder. iTunes will be updated with each track's new location and all of each track's meta-data will be preserved. Option to remove the files from their original location. (I don't advise using this on more than an album's worth of tracks or so at a time; re-locating dozens of tracks' files to a single folder doesn't seem to make much sense to me.)
NOTE: If your "Keep iTunes Media folder organized" preference set, you will not be able to create new folders in or re-locate files within the iTunes Media folder; outside is OK.
why did you choose to use a RAID 5 config vs. any other config?
because RAID 5 allows for one failed drive in the four drive configuration.
read more about it here.
You decided to continue to use your original firewire externals as back-up: does the RAID configuration not adequately do this?
i'm paranoid when it comes to my precious iTunes library
Speed with the NAS, especially performing simultaneous read-write operations: adequate?
more than adequate. however, all my gear is hardwired to my time capsule (except the iDevices, naturally) so i'm getting gigabit speed and a lot of bandwidth.
one thing, though: i have set my NAS to spin down the hard drives after 20 minutes of inactivity. so, if you watch a 1 ½ hour movie, and select the next, you will experience a short delay until the drives spin up again.
never had that with my directly attached firewire drives but it's a small price to pay for the amount of space and features you get from a NAS.
so, if you opt for a NAS, i would recommend this particluar item (what i use). a fella called Stephen Inoue blogs about Macs and Synology. you might like to pop by and have a look:
http://macsynology.wordpress.com/

How Many Songs Can iTunes hold? My Library Is Becoming Quite Large

My iTunes library is getting very large, how many songs can it hold?

There is no fixed limit. However, running a very large library on a less-than-powerful machine may result in slow performance. Also, having too many smart playlists with live updating slows the machine down.
There are some big ones out there, even over 1 TB. Search the web on "biggest itunes library" for some war stories.

ITunes 11 Memory leak when search box is clicked, large library

Mac pro running 10.7 8-core 14gb ram, itunes library on a striped array
scrolling performance is a huge improvement but the app hangs when the search bock is clicked on
and it goes into a massive memory leak, see attached screen grab
works fine in mountain lion with a smaller library, so I assume its choking on my 140,000 tunes ?

I have the same problem. iTunes will eat up 80gb of space if I leave it running; eventually I have to force quit it, and slowly after that the hard drive space returns.
I wasn't sure if it was choking on the search tool, but I have a fairly large library also, so it would make sense.
Anyone got any good fixes for this?

I have a large library that I ripped in AIFF using iTunes. I converted to Mp3 to save drive space, keeping the originals. I have a new computer and want to revert to my original files. iTunes sees the library but is looking for Mp3 files. Suggestions?

I have a large library that I ripped in AIFF using iTunes. I converted to Mp3 to save drive space, keeping the originals. I have a new computer and want to revert to my original files. iTunes sees the library but is looking for Mp3 files. Suggestions?

You're welcome.
For tips on logical organization within iTunes see my article on Grouping Tracks Into Albums.
tt2

Have a large library of music on my iphone 5s. I have just upgraded to iphone6. I believe I need to have all my music in my itunes library to transfer it to my new phone - however all I can see in my itunes library is music I have purchased recently

I have a large library of music on my iphone 5s. I have just upgraded to iphone6. I believe I need to have all my music in my itunes library to transfer it to my new phone - however all I can see in my itunes library is music I have purchased recently. This library of music is from years ago. Ho can I get all my music on my new phone ? Thanks

See turingtest2's user tip on Recover your iTunes library from your iPod or iOS device. You should, however, maintain your library on your PC and maintain a regular backup of it. iPhones are neither designed as nor suitable as data storage devices.

Aperture Conversion - My wife is converting from iPhoto to Aperture due to large library ( 33,000 photos, 109GB). Performance-wise, is it better to convert to Aperture library and leave on the 250GB internal drive or convert and store externally?

My wife is converting from iPhoto to Aperture due to large library ( 33,000 photos, 109GB). Performance-wise, is it better to convert to Aperture library and leave on the 250GB internal drive or convert and store externally?

You are welcome.
convert and store externally?
What versions of iPhoto and Aperture is your wife using? With both iPhoto 9.3 or later and Aperture 3.3 or later she simply could open her iPhoto library in Aperture and be done, since these versions are using a unified library format.
Aperture 3.3: Using a unified photo library with iPhoto and Aperture

ITunes 7 & large library - slow loading

After upgrading to iTunes 7 it takes for ever to launch iTunes and now I get a progress bar that says loading iTunes Library that I didn't get under iTunes 6, I have about 30,000 songs in my library so I imagine it is only a issue with large libraries doe any one else have this issue?...

I also have a rather large library. iTunes 7 definitely takes longer to load. In addition I am now having a problem opening my music folder in my home directory using the Finder to view the files in the folder. If I right-click on the folder I get the spinning beachball for approximately 1 minute (on a dual 2GHz Power Mac G5 w/ 2GB of RAM). When I am finally able to select "Get Info" I get the spinning beachball again for quite a while (at least several minutes!) When the Finder finally reports back it says there is NOTHING in the folder! Aside from my iTunes library I have numerous other tracks in my Music folder that have not been added to my iTunes library. Since iTunes 7 can "see" my iTunes library and play the tracks in there in there I'll assume that my other tracks are still there. The permissions appear to be ok for the folder. I can't believe that Apple has rushed out such a flawed "upgrade" to iTunes! The new features are desirable but it seems that there are way too many glitches with iTunes 7.
Dual 2GHz Power Mac G5 Mac OS X (10.4.7) 2GB DDR RAM

MacBook Pro 13" Retina running 10.9.5 sluggish performance

My 13" Retina MBP 512GB/8GB RAM running 10.9.5 has been running very sluggish recently. Doesn't appear to be any obvious problems other than Adobe Flash crashes almost hourly while web browsing. Here is my EtreCheck report:
Problem description:
Sluggish performance
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 10:32:28 AM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,1
    1 2.8 GHz Intel Core i7 CPU: 2-core
    8 GB RAM Not upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery Health: Normal - Cycle count 81
Video Information: ℹ️
    Intel Iris
        Color LCD 2560 x 1600
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 1:28:24
Disk Information: ℹ️
    APPLE SSD SM0512F disk0 : (500.28 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.42 GB (99.61 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 44
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/VirtualBox
    [loaded]    org.virtualbox.kext.VBoxDrv (4.3.12) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.12) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.12) [Click for support]
    [loaded]    org.virtualbox.kext.VBoxUSB (4.3.12) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.zeroonetwenty.BlueHarvestHelper.plist [Click for support]
    [not loaded]    org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
    [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
    Flux    UNKNOWN (missing value)
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    BlueHarvest    Application (/Applications/BlueHarvest.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.305 - SDK 10.6 Cannot contact Adobe
    Default Browser: Version: 537 - SDK 10.9
    SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
    MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Audio Plug-ins: ℹ️
    DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Growl [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         4%    firefox
         2%    hidd
         1%    WindowServer
         1%    plugin-container
         1%    mdworker
Top Processes by Memory: ℹ️
    593 MB    firefox
    163 MB    ocspd
    155 MB    mds_stores
    137 MB    plugin-container
    120 MB    Microsoft Outlook
Virtual Memory Information: ℹ️
    4.24 GB    Free RAM
    2.50 GB    Active RAM
    985 MB    Inactive RAM
    870 MB    Wired RAM
    787 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 27, 2015, 09:03:52 AM    Self test - passed
    Feb 26, 2015, 01:26:25 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-13 2625_[redacted].crash
    Feb 26, 2015, 01:11:03 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-13 1103_[redacted].crash
    Feb 26, 2015, 12:34:59 PM    /Library/Logs/DiagnosticReports/firefox_2015-02-26-123459_[redacted].hang
    Feb 26, 2015, 12:34:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-26-12 3457_[redacted].crash
    Feb 24, 2015, 06:46:27 PM    /Library/Logs/DiagnosticReports/firefox_2015-02-24-184627_[redacted].hang
    Feb 24, 2015, 06:46:22 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/plugin-container_2015-02-24-18 4622_[redacted].crash

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1266 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 250 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How to handle large library, limited data plan

I've been using Itunes Match for about six months now, and I'm having problems...
I live rurally and so I use an AT&T hotspot with a 10 gig/month data plan for my phone, ipad, and desktop mac. My wireless connection speed is pretty good.
I have about 15000 tracks in my Itunes library, most not purchased through Itunes.
When I signed up for Match and went through the initial process, it took about 24 hours and used up about six gig, which caused a significant overage in my data plan. Consequently, I just use Match on my Mac and decided not to use it on my other devices because of the data limitations. My motivation to use it currently is as a back up for my music. I connect my phone to my mac manually to transfer some of my music to my phone.
I figured that the data overuse problem was a one time deal if I didn't use my other devices.
But recently, when I purchase a song from emusic or Amazon, the icloud processing image pops up after the download purchase is complete. Itunes will then start the process of sending data to Amazon, which was still going at 4 hours yesterday when I manually stopped it as I saw my data plan being used up. It seemed to restart the process of sending periodically and never got to the analyzing or returning data stages.
Now my recently purchased music shows up with both the Icloud processing symbol and a faded download icloud icon, one for each separate track. I can play the "processing" track, but Itunes won't allow me to add it to a playlist. Further, if I'm online with my hotspot, sometimes the regular Itunes Icon is visible, but at other times the icon with the thunderbold through it. I'm guessing this means it's streaming with the first icon, playing from my harddrive with the second.
So a couple of questions, and sorry for the length, I'm a first-time support user
1) Does it make sense to use Match with such a large library, and limited data plan?
2) "Where" is the music I've purchased - on my computer or in the cloud?
3) Should it take all day to send data to itunes, when the only updates to my library are songs I've deleted and a handful of new albums I purchased.
4) Am I using up my data plan when the regular Icloud Icon appears and I'm online? Is there a way to manually play from the hardrive to reduce use of my data plan? I turned off Match once and payed with a half-day sending and receiving session when I turned it back on.
4) Will I lose music if I unsubscribe from Match?
Thanks to anybody who has the inclination to respond to any of these questions!

This datasource sends After images in delta loads which is compatible with loading to a Std DSO only. You cannot load from this datasource directly to a cube.
You can check with business the number of years they would need history. If they need for 5 years, you could delete data older than that or Archive.
For GL, there would not be any changes to years that are closed for posting. There may be adjustments carried out for the previous fiscal year. I guess there would not be any changes to years prior to that. So archiving old data should not affect delta.

I recently purchased an IPOD NANO 6th gen. I have a large library of music on my PC (non MAC). How can I sync my music files from my PC to my IPOD NANO?

I recently purchased an IPOD NANO 6th gen. I have a large library of music on my PC (NON MAC). How can I sync my music library from my PC to my IPOD NANO. I use Windows Media Player to hod my music files.

Install iTunes and import the Windows Media Player library to it.
(63922)

ITunes INCREDIBLY slow since library transfer to Mac

Hi all
Specs upfront:
Mac Mini PowerPC 1.5gig
Tiger with latest updates10.4.7
Bluetooth Apple Wireless Keyboard and Bluetooth Apple Wireless Mouse Pro
brand new Newertech ministack 500gb drive and later upgrade to 1gig memory (explained below)
My problem is that iTunes has been running INCREDIBLY slowly since I moved my library yesterday. Allow me to give some backstory.....
I purchased the mac mini last winter, and I have a large music collection that would not completely fit onto the mini hard drive at that time (approx. 330 gig - >73,000 files) - so what I did was get a crossover cable and networked my mac to my pc and would access my music files on my Windows iTunes library via the "shared library via network" option. It worked fine. I couldn't update track information nor change artwork as needed, but I could at least access my music, and it would do it at a fairly fast clip. When I first would select the Windows iTunes library the beach ball would spin for about a minute, presumably to load in the library informationfrom the PC, but then I could search change tracks, etc, with relative ease and spriteness. Additionally I could do other things on the mac (mostly just goof on the internet and check email, but occassionally do higher function tasks like edit photos in iPhoto or Photoshop elements.) Again, all without any problem.
So last week I took advantage of a sale online of the Newertech ministack drives, and bought a 500gb model. Via the crossover cable I transferred all the music files to the new external hard drive (which is either firewire or USB, my choice) - I accomplished this by making the library folders on the XP sharable, clicked "add to library" on the mac and chose the music folders on the XP, but then had the mac automatically copy the files to the Mac library and also set the Mac itunes to keep the library organized. This took quite a long time - probably close to 20 hours or so. I lost playcounts and the dates things were added, but I figured what the heck. Clean start on a new machine. And also figured that I would figure out a way to get that information moved eventually anyway.
This is when the problem started - and the source of my quandry that I'm hoping someone will be able to help me with.
When I first start iTunes it take a LONG time (about 3 miuntes) to load up - but then again, no problem as I figure it is reading the xml file. HOWEVER< When i now select a song, it will take a few seconds to begin to play, but then what's more odd it that it just about pulls my system down completely. And this is only using iTunes, and perhaps being online (via telephone line) - no other processor or memory intensive thing going on. Switching through songs is a nightmare, and has rendered the entire system non responsive at times forcing a restart.
Furthermore, when it will switch from one song to the other, the information window in itunes (that shows the songs, time elapsed etc) will hang - the next song will already be playing, but the old information will be there hanging - and then the information will "jump" to the current track (usually about 30-45 sconds into it) , but oftentimes I will get the spinning beach ball, as well as itunes not responding at all. Music stutters or cuts out completely for a few seconds. There have been times I've attempted to change information on the ID3 tag through itunes, but clicking the get information button has sometimes resulted in the dialogue box for said track not coming up until the next track is playing because of the beach ball spinning.
I went out and bought 1 gig of RAM for the machine (the max this model can take) and it has MOSTLY stopped the stuttering of the music as it plays (I was watching istat nano, and would notice when a track played my RAM would slowly go down from approx 200 meg free to about 5 meg free, and then the stuttering would begin) - installing the extra memory has stopped this mostly as I said although in watching the istat nano there is a significant chunk of memory being used during the first part of any song before it jumps back to less memory being used). From what I can tell however, it doesn't use up much CPU cycles (using istat nano)
What I find most aggrivating about this, is that when I NOW choose the shared playlist from my XP - it STILL works great as it did before. I can click through, have the computer play songs randomly, do search queues as before and it operates without a hitch, and those hard drives are on a different machine on the floor. Mind you I can't change any information on those tracks, but I can hear and search and change through songs, play, pause responds immediately no problems..........But when I switch back to the "local" mac library eveything goes to **** again. A few times iTunes has completely stopped responding, resulting in me having to force quit the appication.
So having said all that (and if you are still reading this, thank you - I know it is long windeed but figure too much information is better than just my saying "it's not working, how do I fix it" ) I understand that this is a rather large music file (used at my place of employment, I had the guys I work with add their music to it, and use it as a library for the workplace) but I'm sure also that there are others out there with much larger music collections who are doing this without a hitch.
What I HAVE tried so far is to repair the permissions (which were only on the internal Mac drive - no permissions were on the external drive according the the Utilities as that option was greyed out - is that normal? I'm still new to macintosh and have no idea what permissions are, other than people with similar problems as mine on the board were reccommended this as a potential remedy) - and of course I doubled my RAM as described earlier. When I installed the new memory I zapped the PRAM (two chimes on startup) and when I check system preferences the extra memory is showing as available. I even defragged the internal drive thinking that might help, but to no avail. I attempted running the hard drive using the firewire connection and then attempted the USB connection, again, with no luck.
It is most frustrating in that I was looking forward to FINALLY having everything on my Macintosh properly and all things running smoothly - but so far it has just been an aggrivation and has had me scratching my head wondering if I should just have left well enough alone and always have the Mac networked with the Windows machine, or even just stuck with the Windows machine ....... :: shudders ::
Should I delete the xml file and have iTunes rebuild it? Or should I uninstall iTunes and reinsall it? If so, on the internal drive, or on the external drive (provided I can even do that) - as I said before I have no favorite tracks or playlists on the mac yet, so I'd be losing nothing in trying it, and would gladly welcome anything that would resolve this.
I hope you can help, and I anxiously await your response which could be the soluton to my problem.
Respectfully submitted,
Len

Mac OS doesn't use drive letters.
There are instructions to move iTunes to anew computer here: http://support.apple.com/kb/ht4527

Optimizing iTunes Sluggish Performance/Large Library...

Similar Messages

Maybe you are looking for