Option Characteristic as document propoerty ? Doubt

Hi experts,
Please some one tell what is this option under GENERAL TAB OF Info object .... Charatertisct as document property.
It say we can document some comment over there when i press F1.  Can some one say where we will do dcoumentaton for then same and usage scenario.
One more thing we have option transfer rountine . can some tell about this with example .
Advance Thanks,
Chandrasekhar

Hi Chandrasekhar,
Once you activate the option "Characteristic is document attrib." at the "General" tab for the corresponding InfoObjects, you can easily create documents from the context menu of a web report.  Choose the option "Documents -> Upload" if you want to upload an image -for instance-, or "Documents -> Create New Comment" if you only want to add some text.
For example, imagine you have the following Report:
  Month -- Country -- Sales
  01.2010     - Canada     - 100.000
  02.2010     - Canada - 190.000
  03.2010     - Canada - 195.000               
Suppose the business user needs to write a comment in order to explain the value "100.000" for the key figure 0AMOUNT: "The sales in January in Canada were fairly low because the exchange rate was adverse". 
To do so, the first step is to activate the option "Characteristic is document attrib." for both 0CALMONTH and 0COUNTRY.  Then, you run the query, point the row with the value "100.000", right-click and select the option "Documents -> Create New Comment".
Hope this helps.
Regards,
Maximiliano

Similar Messages

  • I need to able to print a pdf that is locked.  It has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document.  Is there a way to do this?

    The PDF has fields to fill in but then to save a copy I need to "print" to PDF not save as a pdf because that is not an option with the document.  Is there a way to do this?  HELP!

    Sorry I thought  was just a one off, it would be no use for large volumes.
    Do you not have this avaiable in the print menu in Preview with these documents?
    I have also found a link on the Adobe web site that discusses that this facilty is enabled by the creater of the PDF.
    http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd61510979419 5ff-7e0d.w.html
    If you do a web search there are various claims on how to save a protected PDF, I have'nt a way to test the proceedures. I would want a copy of any forms that I sent off, not sure why they protect them in this way, there must be a reason.

  • Whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?

    whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?

    tbreezy wrote:
    THANK U!! K ONE MORE QUICK QUESTION. HOW DO I GET RID OF THAT POP UP BOX?
    Not sure, try googling "the global template normal.dotm is already open as an add-in program"

  • Office Web Apps - How do I get Excel and PowerPoint to show up as options for New Documents?

    When I highlight a list of documents, a ribbon shows up at the top.  The left most action is "New Document".  Despite running and installing Excel and PowerPoint services, the only option that shows up is Word.  How do I add Excel and PowerPoint to that list?
    I have confirmed that I am able to upload, view and edit Excel and PowerPoint.  I just cannot find a way to add them as options in New Document.

    Create Content Types, same as in 2007.
    In a nutshell... Create a content type based on Document and add a PowerPoint template. Go to the library and enable Content Types in Advanced. Add the new content type to the library's list of content types. The New button will now contain the name of this new content type.
    Repeat for Excel.
    More info:
    http://msdn.microsoft.com/en-us/library/ms472236(office.14).aspxMike Smith
    TechTrainingNotes.blogspot.com

  • In recording for MIR7 the input option 'other invoice document' is disabled

    Hi All,
    I came across a issue where i opened the transaction MIR7 in a session and it gives an option(in menu and on toolbar) to give input as 'other invoice document' but when i am doing recording through SHDB for the same MIR7 transaction this option 'other invoice document' is disabled. I need this option to make changes in other invoice doc. I am wondering why it's behaving like this......Please assist me on the same.
    Thanks
    Subhankar

    It seems that screen which is compitible with batch recording doesn't provide an option to enter another invoice.
    But, while recording in SHDB, if you put the =DOC in the Transaction box and press enter, system will provide the popup to enter another invoice.
    Regards,
    Naimesh Patel

  • Will Word 2016 have the option to save documents as the Word 97-2003 file format like Word 2013 does?

    This is talking about if Word 2016 will have the option to save documents as the Word 97-2003 format like Word 2013 does or not.

    Hi Carolyn,
    It sounds as though the filename extension association has become confused on your system. It's odd that it happened after conversion, but it should be easy to fix nonetheless.
    Here are some instructions for changing file associations on both Mac OS and Windows:
    Change File Associations in Mac OS X - OS X Daily
    Change which programs Windows uses by default ... (Windows 7)
    Change which programs Windows uses by default - Windows Help (Windows Vista)
    Please let us know if you have additional questions.
    Best,
    Sara

  • RFx change options in RFx document

    Hi Gurus,
    What's the difference between the following two options in RFx document?
    - "Bidder Can Change RFx Responses" at RFx header level
    - "Allow RFx Response Modification" at RFx item level
    Best regards,
    Jack

    - "Bidder Can Change RFx Responses" at RFx header level
    This option allows the bidder to change a submitted RFx response (without buyer's initiative, such as returning the RFx response).
    - "Allow RFx Response Modification" at RFx item level
    This option allows the bidders to provide suppliment, substitute or alternative items to line items in an RFx.

  • BW-BPS: Characteristic is Document Property.

    Hi,
    we want to enter comments manually in BPS. Therefore we want to activate Characteristic is Document Property for special InfoObject.
    How many digits we are allowed to enter? Only up to 60? Is there a possibility to enter more than 60 digits in BPS?
    Thanks

    Hi Henning:
    As you know when a Char is set: "Characteristic is a Document  Property", user comments can be written in reports about this characteristic. That means that SAP must generate a property in the model for document management (DM Workbench) for this Characteristic. So, here you can have 2 situations:
    - First: You are asking the NW to keep tracking/record of addtional  information for your model. That, technically speaking, if you set as DP too many Chars, might affect performance. It's better to agree with your customer (Blueprint phase) which set of Chars will be used in this way.
    - Second: With too many characteristics as Document Properties the display and selection of documents could be not very clear.
    Hope this help.
    Assign points if helpful.
    Kind regards.
    Francisco.

  • How to disable Details option for a Document in KM?

    Hi,
       I had created a Folder by enabling Versioning and Lifetime ,under public documents and i had uploaded a word file under that folder.I had given read permissions to the other user .He is able to open the document with read permission and is able to see the version of the document.Now for the user whom i have given read rights should be able to acess only current version document and he should not be able to see the previous versions(Details->Settings->Versions).
         I want to disable the "Details" option for a document for the user to whom i had given read Rights.if possible i want to deavtivate the "Down Arrow" mark which guides the user to see the options like (Details,feedback,rating,send to,create link etc)
        Please guide me in this issue.
    With regards
    Praveen

    Hi,
    Let's first create our custom layoutset:
    We will duplicate the ConsumerExplorer layoutset.
    goto System Administration -> System Configuration -> Knowledge Management -> Content Management.
    Select User Interface -> Settings -> Layout Set.
    Find ConsumerExplorer, check it and click Advanced Copy.
    Uncheck Collection Renderer Settings and Resource Renderer Settings leaving only UI Command Groups checked.
    select Group Levels to Copy: All, Add "my_" As Prefix and execute.
    You have created a new layout set called my_ConsumerExplorer.
    Now we need to copy the versions command.
    Navigate back to User Interface -> Commands -> UI Commands. find the command versions. Check it and click Duplicate. give it the name my_versions, leave the rest as is and add to the Roles with Visibility the roles you want to be able to see this command. for example: "pcd:portal_content/administrator/super_admin/super_admin_role" for super admin role. Save the new command.
    Now navigate to UI Command Groups, find my_DetailsSettingsSecondGroup and click edit. in the Command List find versions and change it to my_vesions and save.
    Now all you have left is to change the layoutset of the iView.
    goto Content Administration -> Portal Content. Navigate to your iView, open it, find the property Layout Set and change its value to my_ConsumerExplorer. Save.
    Now test it to see if it works.
    Best regards,
    Avishai Zamir

  • How to set "embed icc Profile" option  to export document as JPEG

    Hi All,
    While exporting the document as jpeg, through File->Export, there is an option "Embed ICC Profile" as figure shows.
    How to set it if I am exporting the document through my program in which I rasterize the document and used 
    the sAIImage->AsJPEG(raster, jpegDataFilter, params);
    I didn't find any option in AIRasterizeSettings or AIImageOptJPEGParams to set this flag.
    plz anyone suggest me how to do so.
    Thanks,
    Rud.

    thanks for you through out help.
    I use the folowing code which executing properly,but there is no effect on JPEG whether the value of jpegparam.s.jpeg.embedICCProfile is 0 or 1.
    /////Start
    ASOptimizationSettings jpegparam;
    jpegparam.fileFormat = asffJPEG;
    jpegparam.s.jpeg.embedICCProfile = isICCProfileEmbeded;
    ASInt32 optID;
    optID = sAIOptSet->GetUniqueOptimizationSettingsID();
    error = sAIOptSet->SetOptimizationSettings(optID, &jpegparam); // after executing this line error = 0
    /////End
    I guess it would  work when we export document as jpeg through AIActionManagerSuite
    not with  rasterizing the layer's art and then exporting them as JPEG  using AsJPEG().
    thanks

  • New GL document split-doubt

    Dear all,
    We are planning to configure New PC functionality on ECC6 system.
    Segments are the locations/regions in which we have plants
    Profit centers are product groups.
    Now all the CC , PC and segments have been derived. Document splitting characteristics are based on Profit center and segment fields which are mandatory field and zero balance check also being activated. All the postings are happening correctly.
    I have a doubt now: since bank and cash accounts are defined at Company code level if I have to make a contra posting how does the sytem derives profit center and thus segments?
    In such cases where amounts cannot be assigned to any particular profit center or segment how is it possible to get complete balance sheet at segment level?
    Please clarify.
    Points will be awarded for useful answers
    Thanks,
    Vamsi

    Thanks Marc for that Info.
    Yes the only alternative in such cases is to assign a default PC and then adjust to segments later on.
    In that case we will not be able to reconcile the balance sheet values for segments against the company code, since there will always be some amount left unposted on segments.
    If you can throw some more light with some real scenarios that would be much more helpful.
    Here is my mail id: [email protected]
    Thanks,
    Vamsi

  • Menu option "other invoice document" gets disabled in MIR7 while Recording

    Hi All,
    I have one requirement when I have to open the parked invoice document ( MIRO) with MIR7.
    I don't want to record each and every field and pass the bdcdata then with call transaction.
    There is one option in MIR7 when under invoicedocumnet->other invoice document i can pass the invoice document number and the fiscal year.
    I have the document number and the fiscal year as i have already parked the document with MIRO.
    so i thought to record this and call the transaction then.
    Problem: When i open MIR7 to record, the menu option invoicedocumnet->other invoice document  gets disabled. I am not able to record this.
    Is there any solution to this? Any BAPI exists ??
    Otherwise i would have to record each and every field to pass the parked data into it ..
    Thanks in advance
    Regards
    Mudit Batra

    Hi,
    check this:
    program: SAPLMR1M
    include: LMR1MI3U
    MODULE (PAI) FCODE_6100
      IF ok-code = fcook.
        mir4_change = 'X'.
        SET PARAMETER ID: 'RBN' FIELD rbkpv-belnr,
                          'GJR' FIELD rbkpv-gjahr,
                          'RBS' FIELD rbkpv-rbstat,
                          'CHG' FIELD mir4_change.
        IF sy-tcode = tcode_mir4.
          LEAVE TO TRANSACTION tcode_mir4 AND SKIP FIRST SCREEN.
        ELSE.
          CALL TRANSACTION tcode_mir4 AND SKIP FIRST SCREEN.
        ENDIF.
      ENDIF.
      SET SCREEN 0. LEAVE SCREEN.
    Best regards.

  • Document management doubt

    Hi, all
    1.I have created a document by using  transaction CV01N as
    document:99
    document type:WRP
    document part:000
    document version :00
    in this above document wrote as text to 1.accuracy 2.quality 3.delivery
    2  Transaction code CT04 : created characteristics as follows
    a) accuracy
    b) quality
    c) delivery 
    while creating characteristics i selected document screen & filled relevant created document  data  which is in point 1
    3. Transaction code CL02 : CLASS NAME : INST
    i assigned all above charactertics to class name INST.
    4. Linking document to material master or vendor master
    By  using MM01-- additional data icon-- document data - here i am trying to assign my document which i have created at point 1, but its goes to classification screen & if i choose any one of characteristics  its not appearing in material master record.  please tell me how to get my document to material record
    the above same problem occuring me at xk01 also
    plz tell where i am going wrong ?
    thanking you in advance

    Hi sir ,
    thanks for your advice, i felt my doubt also relates to SAP-MM problem so posted. because  while doing MM01 we need to attach our doc.
    Regards
    Badaripro

  • Hide links and options on Appraisal Documents

    Hi,
    Our customer would like to customize the appraisal documents funcionality with the follow requirements. I searched (application configuratiors, component configurators, classes...) but I didn´t find where I can achieve his expectations :
    Application: hap_start_page_powl_ui_ess
    1 - Hide "Delete Filter" link.
    2 - Exclude or disappear the option "Standard View" from View matchode, once we have created a new View to reach his requirements.
    Thanks.
    Bruno

    Hi Siddharth,
    I tried it and didn´t work. I think this parameter will work only for static elements, isn´t it?
    However I´ve found the class and method responsible by these elements.
    The class is CL_SALV_WD_C_TABLE_V_TABLE and the method is UPDATE_TOOLBAR_ITEM_STD_VSBLE, so I created an enhancement and coded as bellow:
    case l_id.
         when if_salv_wd_c_std_functions=>view_load.
           value = cl_wd_uielement=>e_visible-none.
         when if_salv_wd_c_std_functions=>filter.
           value = cl_wd_uielement=>e_visible-none.
      endcase.
    The unique issue is that configuring like above, all funcionalities that use this class will have these 2 elements invisible. I haven´t found a way to put a condition per QUERY ID, as I performed with the other enhancements, once there is no query id variable in this class.
    Will we need to continue with this behavior or there is some way to get the current query ID in this class?
    Thanks for your help.
    Bruno
    Edited by: Bruno Brigantini Ambrózio on Sep 29, 2011 8:45 PM

  • Applying menu window options to multiple documents

    Hi,
    I wonder if someone can help me with a problem.
    We need to open a menu item (it's actually an extension, not native to ID) set the options we need within that window, then apply that to multiple documents. Is there a simple way to script this (it's a language I don't speak yet!)? I have found various batching scripts but these only open all the documents and the menu window one after another, so you have to re-set your options in the window every time.
    Thanks

    If there isn't a scripting way to do this, does anyone know of any extensions that would allow you to do this?

Maybe you are looking for

  • Syntax error on token

    Hi, I am new to Java. I am getting a compiler error I am not able to resolve the error. Can somebody Please meout? Below is the error that I am getting. Syntax error on token "LinkedList", "interface", "class" expected. Below is the code snippet on w

  • Read several 2D Arrays out of lvm file

    Hello, for my data aquisition, I join three 1-D Arrays to a 2D array. I then save several of these 2D Arrays to a lvm file, until it exceeds 500kb. Here I ues the "write to measurement" express VI. When I'm trying to read the data I encounter a probl

  • Help Regarding BAPI_EMPPERSID_CREATE

    HI TECHIES, I WANT TO POST PASSPORT DETAILS OF EMPLOYEE BY USNING 'BAPI_EMPPERSID_CREATE'. THE MANDATORY FIELDS ARE ONLY 3 PERNR, VALIDITY BEGIN DATE,. VALIDITY END DATE . I AM GETTING THE ERROR MESSAGE "428A COMPLEX APPLICATION ERROR HAS OCCURRED".

  • PO number range per Company code

    Hi all, we have a requirement to assign a separate purchase order number range for each company code.  I know there are several user exits for number ranges but does anyone have any specific advice / experience about this? Many thanks Phil.

  • Subcontracting through MRP

    Scenario1: I provided components to a subcontractor who delivers finished goods. On receiving I found some of the FG as damaged which has to be sent to scrap. How will I proceed (in terms of movt types)? Can I receive the material directly in scrap?