Option to include personal-LR-keywords into DNG (or/and into jpeg) files ?

Is there an option, or a way to
include personal-LR-keywords into DNG (or/and into jpeg) files ?
Or, sorry, did not check it out.. : maybe it's allready automaticaly the case that a DNG (dng, by definition, also incorporates xmp, right?), when opened/imported in someone-elses computer/lightroom.. will positivaly respond to the creator's keywordings of that image?

The place option is usually not available for 16 bit files, so when editing images in acr
change where is says Depth to 8 Bits/Channel or after you open a 16 bit file, go to
Image>Mode>8 Bits/Channel.
MTSTUNER

Similar Messages

I have imported my pictures into aperture, how do I export into jpeg files so i can share files with friends who dont use aperture ?

I have imported my pictures into aperture, how do I export into jpeg files so i can share files with friends who dont use aperture ?

If you want the same export settings on some or all of the images you can select all that have the same export requirements and export them as a group.
If all the images have the same requirements then you can select them all and run the export command.

Getting metadata into jpeg files from RAW

I am transitioning to using RAW files more often. I add metadata, including GPS info, captions etc. Then invariably I need to get JPEGs to someone and have to go through the hassle of exporting the RAW as a JPEG with the metadata.
Is there a way I can get that metadata into the sorta sidecar JPEG file on my Mac without having to go through the export process?
I suppose I could designate the preference that on import the RAW and JPEG were treated as separate files; could I then just copy the metadata in? I haven't really worked with separate JPEG+RAW before. Would it happen automatically if I stacked them? Haven't really explored that.
It just seems that every time I have decided to use the RAW invariably I need the JPEG and if I don't have LR available (say I'm working on someone else's computer but accessing my own files) I'm stuck.
thanks,
Rob
LR5 Mac ML

Is there a way I can get that metadata into the sorta sidecar JPEG file on my Mac without having to go through the export process?
Not in Lightroom. Maybe with ExifTool.
Then invariably I need to get JPEGs to someone and have to go through the hassle of exporting the RAW as a JPEG with the metadata.
Exporting is a hassle? Maybe Lightroom isn't the right program for you.
I suppose I could designate the preference that on import the RAW and JPEG were treated as separate files; could I then just copy the metadata in?
Yes, you could copy and paste (which in Lightroom is called "sync metadata"), but you would have to do it pair by pair, and then save the metadata to the files, and you still wouldn't get sidecar files.
Now, if you don't want the "sorta" sidecar files, if it will work for you to have the metadata written to the JPG files themselves (not sidecar files), then you can tell Lightroom to automatically write the metadata to the JPG files. But ... see my next comment
It just seems that every time I have decided to use the RAW invariably I need the JPEG and if I don't have LR available (say I'm working on someone else's computer but accessing my own files) I'm stuck.
Sorry, but exporting is really the only way to make edits and other metadata available to non-Lightroom programs. If you just want the metadata but not the edited photo, then have it written to the JPG files, but you won't be able to see your edits outside of Lightroom (or PSE or ACR or PS).

How to insert xmp metadata into jpeg files?

Hi
Is it possible to automatically insert the metadata
with the script using text extracted from my database.
I have to insert the metadata into lots of images which are uploaded to a site.
Thanks
[signature deleted bu host]

A scripting tool you may use, although complex, is ImageMagick. It allows loads of image manipulate but also handles data.
Another options is DBGallery, which will very easily allow XMP data to be written to hundreds or thousands of files at a time, but not via script (it's a Windows application). You can see a quick screenshot tour of it's IPTC/XMP capabilities here.
Hope this helps,
Glenn
Developer of DBGallery: The Photo DATAbase

Importing Paint Shop Photo Album 4 keywords into iPhoto

I have many years worth of digital photos organized in folders and marked with Jasc Paint Shop Photo Album 4 keywords. Is there any way to import not just the photos, but the keywords into iPhoto?

Welcome to the Apple Discussions. Unless there's some way to get JPS to write the keywords into the files I don't know of any way to do what you want. An Applescript might be able to read the JPS dB file and write the keyword to the appropriate IPTC field in the file. But that's beyond my capability.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to export photos out that are store in content server into jpeg

Hi, I have a sap content server 6.4 running on Windows 2003 Enterprise Edition (64-Bit)and is use to archive photos in it for the purpose of CV retrieval. DB is Max DB is 7.6.
We will be upgrading into OpenText and there is a request to export all these photos from Content server 6.4 into jpegs files.
Appreciate if anyone can provide some help here.

Hi, any SAP expert please?
For using BAPI_DOCUMENT_CHECKOUTMODIFY and BAPI_DOCUMENT_CHECKOUT, how may i preceed here?
Thanks

How can i NOT include top level keyword in the metadata of an image?

Hello,
I want to know how can i NOT include top level keyword in the metadata of an image. I know there is an option for not applying a keyword to an exported image, but is there an option for not applying the top level keyword to the actual image?
I have organized my geographical (by location) keywords like this:
Places
USA
New York
Miami
Spain.
If i add geographical keywords to all my images, all my images will have the keyword "Places", i dont think that it have any sence to have all your images with one keyword. How can i fix this? Any sugestion? i will appreciate it a lot any help or information that you could give me.
Excuse my english, i know it is not good. I hope that you could understand me.
Thanks,
Marcelo :)

Explicitly excluding a keyword only applies when "exporting". Unfortunately, there's currently no way to stop the keyword being written to the file when "Save Metadata to File" command is used. The natural reaction of users to this difference is to suggest that it is stupid. Nevertheless, there are good reasons why the difference exists:
1. "Export" creates a new file whereas "Save Metadata to File" writes the metadata back into the existing file.
2. There are very good reasons why certain keywords should not be written to file, and the example given in the OP is one. Saving metadata to file is more often used as means of backing up important image related metadata, independently of the catalog or allowing the metadata to be visible in other aplications. It would be rare that such a file would be shared with a third party, so the reason for not including certain keywords is less obvious. Actually, not including it can result in no end of confusion and grief. For example, if the top level (or any keyword) was excluded during the save metadata process then the other keywords would be orphaned when image is imported back into the catalog (e.g. buiding a new catalog).
The development team are aware of the need, in some circumstances, to exclude certain keywords when save metadata command is used. How and when the issue is resolved, without adding even more confusion/complexity, is some way off.

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

How can I include a success message in a drag and drop interaction - I don't see this option in the Actions on success options, and cannot figure it out?

I suspected you used the eye icon on the timeline to hide the message, but that one has no impact whatsoever on the published version. It is only meant to be used for editing reasons on the stage, to hide objects temporarily on a crowded stage. It is confusing, certainly in CP8 where for both instances the same eye icon is used. In previous versions the Properties panel had a checkbox for 'Show in Output', which was IMO much clearer than this eye icon. But of course, that is only my personal opinion.

How to include a KB Update into a WIM in order to point to the WIM when using DISM (details inside)?

Hi, I was told in another of the forums that my issue
is best suited for the TechNet audience. Previously, I posted it here: http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/how-to-include-a-kb-update-into-a-wim-in-order-to/e7015076-b4a9-4862-a73b-6c58b4c82461?tm=1409598696763
I've been struggling to fix a corrupted file.
Context: I feel that something is not right with the computer, so I started poking around.
I used "sfc /scannow" from an elevated command prompt and the result was:
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log <var style="border:0px;margin:0px;padding:0px;vertical-align:top;-webkit-font-smoothing:antialiased;">%WinDir%</var>\Logs\CBS\CBS.log.
I looked in the log. This message appears 4 times:
Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate",
TypeName neutral, PublicKey neutral in the store, hash mismatch
There is also the following message:
This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
I'm not positive what to do next, but I have been led to believe the problem is that Flash files in version 6.3.9600.16407 are corrupted, that I need to find which KB updates Flash to this version, download the file, add it to a new WIM, and point
to it when using DISM. I'm not positive this is correct, but it was suggested.
I downloaded the KB update: kb2889543, but I do not know how to add it to a new WIM or what the repercussions of doing so will be (e.g. Will I lose everything and have to restore my documents, etc from my external drive by doing this?).
So, the question is: How can I include a KB Update into a WIM and tell me what the result will be when once I do and point to it when using DISM?
Secondarily, if this is a bad way to move forward with the issue, would some kind soul offer sage advise on how to move forward with resolving the original issue?

Hi TTQSTTQS,
As you mentioned in the answers forum, when run the command DISM /Online /Cleanup-Image /RestoreHealth, we received the error message “The source files could not be downloaded. Use the "source" option to specify the
location of the files that are required to restore the feature”.
When run the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess, we met the same error message.
I think there are some mistakes in the source setting, so we meet the same error messages.
As I mentioned in the last reply, we need a mounted image as a repair source, and then use this path.
We need to configure a Windows repair source. Please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825020.aspx
Please refer to the following steps to set the source image.
1. Assign Drive Letters to Partitions by Windows PE.
2. Capture Partition Images using DISM
For more information, please refer to the following article.
http://technet.microsoft.com/en-us/library/hh825072.aspx
Then, we could try the command Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Are keywords added through Lightroom embedded into the file itself?

I'm new to Lightroom. I'm looking for a way to organize my pictures and videos. But I'm also hestitant because I have no idea whether Lightroom will be around 10, 15 or 20 years from now. When I apply a keyword to a file, is that keyword permanently embedded into the file itself? The reason I'm asking is I'm most likely going to spend a ton of time applying keywords to my files. What happens if 10 years down the road Lightroom disappears or a need to move to a new program? Are the keywords dependent on Lightroom or will the keywords that I add to the picture and videos remain with those files and be recognized by the new program?

Yes, LR writes the keywords, and indeed all the metadata from the right-hand side (title, caption, capture date, etc.), into industry-standard fields in the image's file. LR is reasonably compliant with industry standards, so you can be confident that your data will be read by programs in the future.
Most people set the option Catalog Settings > Metadata > Automatically Write Changes Into XMP, which will write the metadata back to the file in background after you change it. If you don't set that option, you'll have to manually do Metadata > Save Metadata To File.
Important note for video: LR does not fully support video metadata, and it doesn't write any metadata back to videos. So if you want your metadata to get written back to the file system independent of the LR catalog, you'll need to use either the Video Asset Management plugin or the Any File plugin to manage your video. These third-party plugins create "sidecar" JPEG files into which your metadata changes will be stored.

Is there a way to organize keywords into folders?

Hi there,
I currently use Adobe Bridge to tag and rate my 61 GB (and growing) Photo Library but I love iPhoto (ease of exporting, some editing capabilities, smart folders, ordering options, and all just ease of use) and am wondering if there's a way to have a folder system in the keywords area so that I can organize my keywords into logical groupings as you can do in Bridge. This is really the only reason why I don't have all of my photos in iPhoto right now but it's a biggie for me.
Thanks!
Lisa

Lisa
Check out Keyword Manager, which supports nesting keywords.
Regards
TD

Send email including the data field into the html message body

Hi all,
I would like to send an email to each recipient once only, and including a data field into the html body message. I am not sure how to achive that with my current stored procedure.
USE [CallManager]
GO
/****** Object: StoredProcedure [dbo].[PersonalCallsReminder] Script Date: 08/27/2014 10:26:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[PersonalCallsReminder]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Email Users
declare @email varchar(max)
declare mycursor cursor FAST_FORWARD for
SELECT dbo.HumersStaffExtension.email
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email,
dbo.HumersStaffExtension.res_id
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
OPEN mycursor;
FETCH NEXT FROM mycursor
INTO @email
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'CallsManagement',
@recipients = @email ,
@body_format = 'HTML',
@subject = 'Personal Calls Reminder',
@body = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<title>Personal Calls Reminder</title>
<style type="text/css">
body {
font-family: "Times New Roman", Times, serif;
font-size: 11pt;
.auto-style1 {
background-color: #FFFF00;
</style>
</head>
<body>
<div>
<table style="width: 800px">
<tr>
<td>Dear,<br />
<br />
Please review your phone bills and submit your personal calls using the following link:<br />
<a href="http://companyxyz/personalcalls/">Personal Calls</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>Kindly be informed that the deadline to process new bills is on the
<span class="auto-style1">15th of each month</span>.</strong></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td>For assistance, please contact <a href="mailto:[email protected]">[email protected]</a></td>
</tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>*** This is an automatically generated email, please do not reply ***</strong></td>
</tr>
</table>
</div>
</body>
</html>
FETCH NEXT FROM mycursor
INTO @email
END
CLOSE mycursor;
DEALLOCATE mycursor;
END
Changing the query to the following:
SELECT TOP (100) PERCENT dbo.HumersStaffExtension.email, dbo.Calls_Mobile_Header.ExtractDate
FROM dbo.Calls_Mobile_Header INNER JOIN
dbo.HumersStaffExtension ON
dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email, dbo.HumersStaffExtension.res_id,
dbo.Calls_Mobile_Header.ExtractDate
HAVING (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
ORDER BY dbo.HumersStaffExtension.email
Will provide me with the following results:
email ExtractDate
[email protected]
July-2014
[email protected]
August-2014
[email protected]
July-2014
[email protected]
August-2014
Is it possible to send email to [email protected] once only including in the html message body the ExtractDate field results for July-2014 and August-2014?
I appreciate any assist on the issue.
Thank you in advance.

Refer the below code highlighted in bold.
USE [CallManager]
GO
/****** Object: StoredProcedure [dbo].[PersonalCallsReminder]    Script Date: 08/27/2014 10:26:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:  <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[PersonalCallsReminder]
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Email Users
declare @email varchar(max),@date datetime
declare @temp table (email varchar(50), extractDate datetime)
insert into @temp
  SELECT     TOP (100) PERCENT dbo.HumersStaffExtension.email, dbo.Calls_Mobile_Header.ExtractDate
  FROM         dbo.Calls_Mobile_Header INNER JOIN
         dbo.HumersStaffExtension ON
         dbo.Calls_Mobile_Header.TelNumber = dbo.HumersStaffExtension.telnr_prv COLLATE SQL_Latin1_General_CP1_CI_AS
  GROUP BY dbo.Calls_Mobile_Header.RecordStatus, dbo.HumersStaffExtension.usr_id, dbo.HumersStaffExtension.email, dbo.HumersStaffExtension.res_id,
         dbo.Calls_Mobile_Header.ExtractDate
  HAVING      (dbo.Calls_Mobile_Header.RecordStatus = N'0') AND (NOT (dbo.HumersStaffExtension.email IS NULL))
  ORDER BY dbo.HumersStaffExtension.email
declare mycursor cursor FAST_FORWARD for SELECT DISTINCT email from @temp
OPEN mycursor;
FETCH NEXT FROM mycursor
INTO @email
WHILE @@FETCH_STATUS = 0
BEGIN
    DECLARE @date nvarchar(200)
    SELECT @date=Stuff((SELECT ',' + [extractDate]
              FROM   @temp where email = @email
              FOR xml path('')), 1, 1, '')
       EXEC msdb.dbo.sp_send_dbmail
            @profile_name = 'CallsManagement',
            @recipients = @email ,
            @body_format = 'HTML',
            @subject = 'Personal Calls Reminder',
            @body = '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<title>Personal Calls Reminder</title>
<style type="text/css">
body {
font-family: "Times New Roman", Times, serif;
font-size: 11pt;
.auto-style1 {
background-color: #FFFF00;
</style>
</head>
<body>
<div>Extract Date : ' + @date + '</div>
<div>
<table style="width: 800px">
  <tr>
   <td>Dear,<br />
   <br />
   Please review your phone bills and submit your personal calls using the following link:<br />
   <a href="Personal">http://companyxyz/personalcalls/">Personal Calls</a></td>
  </tr>
</table>
<br/>
<table style="width: 800px">
  <tr>
   <td><strong>Kindly be informed that the deadline to process new bills is on the
   <span class="auto-style1">15th of each month</span>.</strong></td>
  </tr>
</table>
<br/>
<table style="width: 800px">
  <tr>
   <td>For assistance, please contact <a href="[email protected]:[email protected]">[email protected]</a></td>
  </tr>
</table>
<br/>
<table style="width: 800px">
<tr>
<td><strong>*** This is an automatically generated email, please do not reply ***</strong></td>
</tr>
</table>
</div>
</body>
</html>
      FETCH NEXT FROM mycursor
      INTO @email
END
CLOSE mycursor;
DEALLOCATE mycursor;
END
Regards, RSingh

Embedding Keywords into Metadata?

How do I embed keywords into photo metadata so that it is there permanently?
(using Maverics and iPhoto 11)

You do it when you export the photos out of iPhoto via File ➙ Export ➙ File Export menu option.
OT

HT1349 Option to "include CD Text" Inactive When Burning CD

I have always included CD Text when burning CD's from iTunes up until last week. I downloaded the latest iTunes update on Monday and suddenly This option is not active when I attempt to burn CD's using my external Samsung CD / DVD Writer. Why has this now happenned? Has anyone else experienced the same thing, if yes, is there a cure? Thanks

I like Nero better when burning. I've only burned a few cds with iTunes so I can't really tell you. You can just open up iTunes and drage the files into Nero (when its asking for files to add to the mp3/audio/whatever disc).

Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC

Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC twice with no avail and deleted every Adobe product on my computer and nothing is working.

I have seen similar discussions before... transferring does not work, you must install
Discussions of RE-installing
-http://forums.adobe.com/thread/1408331?tstart=0
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Option to include personal-LR-keywords into DNG (or/and into jpeg) files ?

Similar Messages

Maybe you are looking for