Options pulldown menu doesn't work - nothing comes up

options pulldown menu doesn't work - nothing comes up, no matter how long I wait.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Similar Messages

Safari menu doesn't work

I have a strange Safari bug... After about a day of using Safari 2.0.4 (the latest stable version), the main Safari menu stops working. I can still pull it down, but selecting anything in it does nothing.
For example, I can pull down the Safari menu and select Quit, but the app doesn't quit. I can pull it down and select Preferences, but no preferences appear.
On the other hand, I can type Cmd-Q and Safari will quit. I can type Cmd-K to toggle pop-up blocking. But selecting any item in the menu doesn't work.
All the other menus work fine. Safari itself also works fine. The application menu in other apps work perfectly.
The problem crops up after about a day or so. If I quit Safari and re-launch, the menu will behave correctly for a while. Then, sometime later, it will stop working. Safari has been doing this for at least a year -- perhaps two.
I have tried trashing Safari's preferences. A Mac Genius suggested installing Safari 3 Beta, then un-installing to restore Safari 2, but that didn't help.
Any ideas?
PowerMac G5 Dual Mac OS X (10.4.10)

This might be worth a try:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Start up Safari again, and things should have improved.
Safari has been doing this for at least a year -- perhaps two.
And you never to question it? I have never seen that behaviour.

My navigator menu doesn't work

hi @ll
I am new on iweb, or website designg, i just did my page, and my navigator menu doesn't work, if i try go from welcome to about us, i click and nothing happends, same with my email botton, and i did the link with the inpector, same with the music! but it was working before..
any help??
thanks a lot! yea! my site it's web.mac.com/digital.arts, maybe it help you to understand the problem, english it's not my firts language
kind regards
110% trouble

110% Trouble,
Welcome to the iWeb Discussions. It appears that your grahic box of the hand is covering your email text and the nav bar is also covered by the Once Upon a Time box. Turn on 'Show Layout' and you'll see the graphic box extending over the email and the same for the nav bar.

DVD menu doesn't work right in DVD players

I've created a DVD in Encore for Mac. It plays fine on my Mac and on Windows. However, once it is inserted into a stand alone DVD player, the menu doesn't work right. I have four text menus. In the DVD player, none of those are navigable. Arrowing up or down doesn't work. You have to click a number on the remote keypad and then play. This also causes "Channel 1" or "Channel 2" and so on to display. Any ideas how I can get the arrow keys to work? I don't have a stand alone dvd player to test against.
Also, in Windows, I have someone that wants to duplicate the dvd. They're using Movie Maker. It gives an error that the codec is not installed but doesn't say which codec. Any ideas on that?

The only time I recall similar problems was the issue Jeff was asking about above (Mac, Encore CS3, certain OS). If you don't solve this otherwise, I'd experiment with that.
You appear to have confirmed that there is button navigation. (In button routing, each button points to another.) Where does it break down?
On the Mac/PC, are you using the mouse? In the computer DVD software player, there should be a "remote" that you can use to see if the button navigation is working. Does the computer "remote" option work? If so, it makes it not working in a standalone player even odder.
If not, then look at whether the project works before you burn to disk. Does the "remote" work in the Encore preview? Or build to a folder, then play the DVD from the folder. (I don't know how on Mac; on PC, I find the first .ifo in the VIDEO_TS folder, and play that.)

Archive Utility's option "save in" doesn't work

Archive Utility's option "save in" doesn't work in Finder. Even I use its .prefPane and set it there…
I only want all my archives created with Finder are saved on the Desktop…
What's wrong with Mac OS X?

I think I found it. It's look like a bug in Mac OS X…
Look at my screenshot. There should be "archive-into" instead of "archive-info" (like in "dearchive-into")?

Smartshape menu doesn't work in html5

Hi,
I have made a kind of menu with smartshapes that are set "rest of project" and " placed on top". There are an advanced action on each that show/hide captions, also set for the rest of project, on top.
I have put a flash version of the tutorial. You can see at the slide #12 (until the end) what should happen: click to show caption/ click to hide:
http://www.bibl.ulaval.ca/diapason/evaluer_cegep3/evaluer_cegep3.htm
But when I publish it in html5, it doesn't work anymore:
http://www.bibl.ulaval.ca/diapason/evaluer_cegep2/index.html
Is there an option that can cause that problem?
thanks!

Hi there
You need to visit http://www.acrobat.com and ensure you have an account there. (I believe it's free to create an account)
Cheers... Rick

Why does search option in history doesn't work? It does not display any sites I've been to.

I enter history, type a name of a site I've been to in 'search' or 'find' field (I'm using polish version so I don't know the exact name of that field) and it does not find anything. I haven't cleared my history, it's all there when I open 'today', 'yesterday' etc. tabs. Only finding it using search option doesn't work.
It used to work fine now it doesn't. I haven't installed anything.

Make sure that you're not running Firefox in Private Browsing mode.
https://support.mozilla.com/kb/Private+Browsing
You enter Private Browsing mode if you select:
Tools > Options > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose:
Tools > Options > Privacy
choose the setting Firefox will: Use custom settings for history. Deselect:
[ ] "Permanent Private Browsing mode"

Flash menu doesn't work after opening an external link.

Hi,
I have this problem - I made a simple website with a flash menu, that opens internal links in an iframe. However, I have a few other (not included in the menu) external links, which open in the same iframe. And after I click on one of them and it loads in the iframe, the buttons on the menu stop working. I'm beginning to think it has something to do with the internet explorer, since it works on some computers. But I'm not sure... not very good at this.
I've been searching for an answer here and there, but still haven't found anything. Please, help.
Thank you!

Here it is: http://kiss4eto.is.com/. Click on the Me button, for example. It should work. Then click on the "Addicted to Facebook" link on the right and after that try the Me button again. It doesn't work any more. At least on my computer.
Thanks, again.

DVD menu doesn't work on the finished DVD

Please, I need some help.
I am having problems with a DVD menu.
Several days ago I burned a DVD from the same project that I tried to export to DVD today, and I did not have any problems with DVD menu, but today, when I start to burn DVD it shows me a warning sign that tells a few DVD markers are closer than they are required, and after burning DVD the DVD menu doesn't show or work on the finished DVD. What am I doing wrong?
Robert

Look here: http://www.adobeforums.com/webx/.1dea22a5/

Burned DVD - menu doesn't work

I'm fairly new to all this and have created a slideshow in iMovie and then created a DVD in iDVD. In iDVD it all works (there is just one menu item). But when I burn to disc image (or even burn a dvd) the menu link doesn't work - it just starts over the main screen. However, with the mac dvd player if I go to the menu, I can access it through "title".
HELP!
Many thanks!
bchina

Try closing iDVD and trashing the file called com.Apple.iDVD.plist located in User/Library/Preferences. iDVD will create a new file upon relaunch. Then repair permissions using the Utilities/Disk Utility app on your Mac. After deleting coded assets, try burning again.
When you burn again, I would burn from a disk image rather then directly from your iDVD project. Open your iDVD project, Delete Coded Assets from the Advanced menu, and save your project as a Disk Image on your hard drive. The assets will re-encode, taking a little time. Play the disk image with your computer's DVD Player application and see if the menu button works on the disk image. If it does, your initial problem might be caused by bad media. Burn a new DVD disk from the disk image at 4x speed, using Verbatim or Maxell DVD-R disks. See if that works.
Hope this helps.

Option System recovery doesn't work

Notebook Lenovo G50-30 (80G0) - bought a month ago. (Windows 8.1)
Few days ago sound stopped work suddenly. I suspect that this is associated with MS Updates, which was set as automatic. I suspect because this notebook is not my. But now I have it for repair. I noticed that system work abnormally, when I try to use some function from control panel it doesn't work and control panel stop responding. For example update settings.
I decided restore system to factory setting, using NOVO key and option System Recovery. Unfortunately when I choose this option nothing happens and computer loading operating system as usually. I try use software OneKeyRecovery and after it sytuation is the same.
Important information is that system partition C was divided into two parts/partitions. And it was my first clue that something is wrong with ID partitions, but maybe i'm wrong. I change it and set one C volume.
Diskpart shows 5 volumes (0-4), the last one is the recovery partition like below:
On computer: LENOVO-G50
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 E DVD-ROM 0 B No Media
Volume 1 C Windows8_OS NTFS Partition 450 GB Healthy Boot
Volume 2 WINRE_DRV NTFS Partition 1000 MB Healthy Hidden
Volume 3 SYSTEM_DRV FAT32 Partition 260 MB Healthy System
Volume 4 PBR_DRV NTFS Partition 13 GB Healthy Hidden
Partition 5
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : Yes
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 486004490240
Volume ### Ltr Label Fs Type Size Status Info
* Volume 4 PBR_DRV NTFS Partition 13 GB Healthy Hidden
Can someone help me? How can I restore factory settings?

hi mehowg,
Can you try to create a recovery drive and use it to Refresh or Reset Windows 8/8.1.
If that doesn't work, you can try the folliwing to reinstall the OS:
1. Check this guide on how to obtain a Windows 8.1 ISO (see Option One)
2. After you set Boot Mode to UEFI in the BIOS, follow this guide to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive and use it to install Windows 8.1 on the G50-30 (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that will let you activate Windows).
Note:
The above method (Steps 1-2) will only re-install Windows (you will need to reinstal the drivers manually from the G50-30 drivers page)
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

"Exclude page from menu" doesn't work

Choosing Page > Page Properties > Menu Options > Exclude page from menus doesn't work for me in the current release. Anybody else having this problem?

Humm?
Just tested both your process and again by going to Plan View > rt-click on page > Menu Options and both instantly remove the page.
Have you tried just making simple/quick test site with 2-3 pages and trying?
Maybe somthing in your site and not in Muse that's causing the issue.

FLVPlayBack loop and menu doesn't work

Hi,
My FLVPlayBack integratino doesn't work : menu don't show, the video don't loop .
It's here :
http://www.fermedesetoiles.com/
And the code generated by flash CS5 pro :
<div id="flashContent">
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="385" height="282" id="pic-du-midi-fevrier-2011" align="middle">
<param name="movie" value="videos/pic-du-midi-fevrier-2011.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="true" />

<object type="application/x-shockwave-flash" data="videos/pic-du-midi-fevrier-2011.swf" width="385" height="282">
<param name="movie" value="pic-du-midi-fevrier-2011.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#ffffff" />
<param name="play" value="true" />
<param name="loop" value="true" />
<param name="wmode" value="window" />
<param name="scale" value="showall" />
<param name="menu" value="true" />
<param name="devicefont" value="false" />
<param name="salign" value="" />
<param name="allowScriptAccess" value="sameDomain" />
<param name="allowFullScreen" value="true" />

<a href="http://www.adobe.com/go/getflash">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Obtenir Adobe Flash Player" />
</a>

</object>

</object>
</div>
An other problem : my css menu is behind the video.
Does anyone no why ?
Thanks.

Add change your wmode. From an old post:
Window Mode (wmode) - What's It For?
There are three window modes.
Window
Opaque
Transparent
By default, the Flash Player gets its own hWnd in Windows. This means that the Flash movie actually exists in a display instance within Windows that lives above the core browser display window. So though it appears to be in the browser window, technically, it isn't. It is most efficient for Flash to draw this way and this is the fastest, most efficient rendering mode. However, it is drawing independently of the browser's HTML rendering surface. This is why this default mode (which is equivalent to wmode="window") doesn't allow proper compositing with DHTML layers. This is why your JavaScripted drop-down menus will drop behind your Flash movie.
In windowless modes (like opaque), Flash Player doesn't have a hWnd. This means that the browser tells the Flash Player when and where to draw onto the browser's own rendering surface. The Flash movie is no longer being rendered on a higher level if you will. It's right there in the page with the rest of the page elements. The Flash buffer is simply drawn into whatever rectangle the browser says, with any Flash stage space not occupied by objects receiving the movie's background color.
Best wishes,
Adninjastrator

Grayed-out airport and bluetooth options (pulldown-menu)

Hi,
since the last week, i got some trouble with pulldown-menus of the desktop menu-bar.
everything in an apple (no third-party stuff) pulldown menu is grayed-out.
grayed-out:
bluetooth
airport
battery
time machine
working:
MobileMe
Audio
Language
Time
still i can change these options through the system preferences.
i tried the basic, "switch of and on" but this does not work.
because i do not have any more ideas and this problem is a little peeving, i hope someone here can help me.
thanks in advance!
Ps.: sorry about my language abuse
Message was edited by: freeman339

you mean in the sharing and permissions for the airport utility?
if so, yes. i'm running as admin there.
i can change networks through the system preferences menu. but not through the finder ribbon under the airport signal fan

JPopupMenu with JInternalFrame, popup menu doesn't work

hi, i have this problem, as shown in the sample code at the end of this post.. basically, i have a table, and i added a JPopupMenu onto the table.. the popup menu works well when running the table class, though, when i call the table class in a JInternalFrame environment, the popup menu won't work.. anyone know why?
///Basic sample table code, when run this alone, the popup menu will work
import java.util.*;
import java.awt.event.*;
import javax.swing.*;
public class TableBasic extends JPanel
     private JTable table;
     public TableBasic()
          String[] columnNames = { "Date", "String", "Integer", "Boolean" };
          Object[][] data =
               { { new Date(), "A", new Integer(1), Boolean.TRUE },
                    { new Date(), "B", new Integer(2), Boolean.FALSE },
                    { new Date(), "C", new Integer(9), Boolean.TRUE },
                    { new Date(), "D", new Integer(4), Boolean.FALSE}
          table = new JTable(data, columnNames)
               //Returning the Class of each column will allow different
               //renderers to be used based on Class
               public Class getColumnClass(int column)
                    return getValueAt(0, column).getClass();
          table.setPreferredScrollableViewportSize(table.getPreferredSize());
          JScrollPane scrollPane = new JScrollPane(table);
          add(scrollPane);
     public void createPopupMenu()
          JMenuItem menuItem;
          //Create the popup menu.
          JPopupMenu popup = new JPopupMenu();
          menuItem = new JMenuItem("A popup menu item");
          //menuItem.addActionListener(this);
          popup.add(menuItem);
          menuItem = new JMenuItem("Another popup menu item");
          //menuItem.addActionListener(this);
          popup.add(menuItem);
          //Add listener to the text area so the popup menu can come up.
          MouseListener popupListener = new PopupListener(popup);
          table.addMouseListener(popupListener);
     public static void main(String[] args)
          JFrame frame = new JFrame();
          TableBasic table = new TableBasic();
          table.createPopupMenu();
          frame.setContentPane(table);
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.pack();
          //frame.setLocationRelativeTo(null);
          frame.setVisible(true);
     class PopupListener extends MouseAdapter
          JPopupMenu popup;
          PopupListener(JPopupMenu popupMenu)
               popup = popupMenu;
          public void mousePressed(MouseEvent e)
               maybeShowPopup(e);
          public void mouseReleased(MouseEvent e)
               maybeShowPopup(e);
          private void maybeShowPopup(MouseEvent e)
               if (e.isPopupTrigger())
                    popup.show(e.getComponent(), e.getX(), e.getY());
///when integrate the previous table into here, popup menu won't work
import java.awt.*;
import javax.swing.*;
public class InternalFrameBasic
     extends JFrame
     //implements ActionListener
     private JDesktopPane desktop;
     private JInternalFrame menuWindow;
     public static final int desktopWidth = 800;
     public static final int desktopHeight = 700;
     public InternalFrameBasic(String title)
          super(title);
          //Set up the GUI.
          desktop = new JDesktopPane();
          desktop.putClientProperty("JDesktopPane.dragMode", "outline");
          //Because we use pack, it's not enough to call setSize.
          //We must set the desktop's preferred size.
          desktop.setPreferredSize(new Dimension(desktopWidth, desktopHeight));
          setContentPane(desktop);
          createMenuWindow();
          desktop.add(menuWindow); //DON'T FORGET THIS!!!
          Dimension displaySize = menuWindow.getSize();
          menuWindow.setSize(desktopWidth, displaySize.height);
     private void createMenuWindow()
          menuWindow =
                         new JInternalFrame("Event Watcher", true, //resizable
                                                                                               true, //closable
                                                                                               false, //not maximizable
                                                                                               true); //iconifiable
          menuWindow.setContentPane(new TableBasic());
          menuWindow.pack();
          menuWindow.setVisible(true);
      * Create the GUI and show it. For thread safety,
      * this method should be invoked from the
      * event-dispatching thread.
     private static void createAndShowGUI()
          //Make sure we have nice window decorations.
          //JFrame.setDefaultLookAndFeelDecorated(true);
          //Create and set up the window.
          JFrame frame = new InternalFrameBasic("Example Internal Frame");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          //Display the window.
          frame.pack();
          frame.setVisible(true);
     public static void main(String[] args)
          //Schedule a job for the event-dispatching thread:
          //creating and showing this application's GUI.
          javax.swing.SwingUtilities.invokeLater(new Runnable()
               public void run()
                    createAndShowGUI();
}

table.createPopupMenu();The above line should not be in the main method. It should be in the constructor class of TableBasic.
You never execute that method in your InternalFrameBasic class to the mouse listener never gets added to the table.

Options pulldown menu doesn't work - nothing comes up

Similar Messages

Maybe you are looking for