ORA-01079: ORACLE database was not properly created, operation aborted
Hello everyone,
On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
My problem is that I've to drop the database as the same is not created properly.
For that, I get the below error when I try to mount the database.
ORA-01079: ORACLE database was not properly created, operation aborted
Also, when I was starting the database specifying the pfile, it was throwing error saying
ORA-00202: control file: 'D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB.ORA'
When I specified control_files clause in init.ora I was getting above error, so I tried removing the same but still faced the same error.
Can anybody help me resolving the problem ... ???
thanks
Rossy Rocs wrote:
Hello everyone,
On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
My problem is that I've to drop the database as the same is not created properly.
For that, I get the below error when I try to mount the database.
ORA-01079: ORACLE database was not properly created, operation aborted
Also, when I was starting the database specifying the pfile, it was throwing error saying
ORA-00202: control file: 'D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB.ORA'
When I specified control_files clause in init.ora I was getting above error, so I tried removing the same but still faced the same error.
Can anybody help me resolving the problem ... ???
thanksyou should be able to do the following on windows from the command line
oradim -delete -sid sampledbthen remove the D:\ORACLE_10G\DATABASE\ folder from the filesystem (assuming there are only files relating to your db in there.
finally remove the D:\ORACLE_10G\ADMIN\SAMPLEDB folder structure assuming it exists.
Niall Litchfield
http://www.orawin.info
Similar Messages
-
ORACLE error from auxiliary database: ORA-01152: file 2 was not restored fr
Hello,
i'm trying to clone a database. It is in archive log mode.
I took a full back using below command
run {
backup
tag 'DAILY_WHOLE'
format 'FULL_backup_%s_%p_%c.bkp' database
plus archivelog
tag 'DAILY_WHOLE'
delete all input;
backup
current controlfile
format 'FULL_backup_%s_%p_%c.bkp' tag 'WHOLE'
spfile
format 'FULL_backup_%s_%p_%c.bkp' tag 'WHOLE';
}then i issue a duplicate database command
RUN
DUPLICATE DATABASE TO TEST_DB
NOFILENAMECHECK
NOREDO
BACKUP LOCATION '/disk10/flash_recovery_area/PROD';
}at the very end I got this error.
contents of Memory Script:
Alter clone database open resetlogs;
executing Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/15/2013 11:59:21
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2: 'sysaux.dbf'Can anyone help me? I would appreciate it. thanksNOREDO would be used when you have a Consistent Backup (i.e. backup taken when the database is MOUNTed but not OPEN) and so, no archivelogs need to be applied. (This would also be the case for a NOARCHIVELOG database).
See the notes on NOREDO in the DUPLICATE command documentation in the Backup and Recovery Reference.
http://docs.oracle.com/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Hemant K Chitale -
DPM 2012 Install Fails, The Database was not Created ID 811
Hi.
I've tried installing DPM on a Standalone Server (SQL + DPM), and get the "Database was not Created" error. I initially tried DPM 2012 R2, and found that there is an issue with Disjoint Namespaces, so went to DPM 2012 SP1, but still getting
the same error.
The Install Account has full access rights (sysadmin) to the DPM SQL Instance, however cannot seem to get it right. The account using to do the install has full Enterprise admin, Domain Admin, Backup Operators & Administrators rights.
When opeining SQL Managemet studio, I can see the database has been created but the setup fails and requires me to revert.Here is the last few lines of the Install Log File, please help I always mark as answer.
2014-10-01 08:54:49 PM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
[2014-10-01 08:54:49 PM] Information : Creating tables
[2014-10-01 08:54:49 PM] Information : Execute the SQL script
[2014-10-01 08:54:49 PM] Data : FileName = "D:\Program Files\Microsoft System Center 2012\DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[2014-10-01 08:54:49 PM] Data : Arguments = -b -E -d DPMDB_S_PRODBACKUP -i MiniSetupDBConfiguration.sql -r -S S-PRODBACKUP\SCDPM
[2014-10-01 08:54:49 PM] Data : Error code = 0
[2014-10-01 08:54:49 PM] Information : Adding DPM Server entry in tbl_AM_Server table
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
[2014-10-01 08:54:50 PM] Data : Database connection string = Integrated Security=SSPI;server=S-PRODBACKUP\SCDPM;Pooling=false;database=DPMDB_S_PRODBACKUP;Pooling=false
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Registering DPM category
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding ConsiderOfflineMediaToCheckOffsiteReady to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Add job definitions
[2014-10-01 08:54:52 PM] Information : Creating schedules
[2014-10-01 08:55:00 PM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
[2014-10-01 08:55:00 PM] * Exception : => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: DatabaseCreateFailed; 0; None
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: DatabaseCreateFailed; 0; None
[2014-10-01 08:55:02 PM] *** Error : The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
[2014-10-01 08:55:02 PM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
[2014-10-01 09:33:51 PM] Data : Error Code Web Link =
http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft System Center Data Protection Manager&ProdVer=4.1.3313.0&EvtID=811&EvtSrc=MSDPM&LCID=1033&P2wAppId=p2wMsdpmEEHi,
Check the SQL Agent account on the remote SQL server and make sure the user account syntax is in the form of UserName\DomainName and not UserName@DomainName - if it is change it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
Virtual Machine Manager database was not created
Hi
I Use this
link to Install SYVM 2012 SP1 on My lab .
But When i got section "Install VMM", The installation Give me the following error .
The Virtual Machine Manager database was not created.
The Virtual Machine Manager database was not created. Delete VirtualManagerDataBase.mdf and VirtualManagerDataBase_log.ldf if they exist at or use a unique name for the database. Also, verify that disk quota management is not enabled for the drive where the database is being created. Then run Setup again.
how to fix it ?
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:I also disable the firewall on SQL Server , but doesn't work .
Now i Create data base manually and i can cross that error , but it stop with this new error
Access to the path 'C:\ProgramData\VMMLogs\SetupWizard.log' is denied
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook: -
The DPM database was not created.
Hi,
I am trying to install DPM and it is driving me insane.
I have installed SQL Server locally on the Server and I'm now trying to get DPM on.
It gets all the way to the end and then gives me the following error :
ID : 811 The DPM Database was not created.
I can't see anything wrong with how SQL Server was setup, and the account that I am running the DPM install under is a SQL SysAdmin.
Please help.Hi,
I would recommend reviewing the
DpmSetup.log
DPM 2010:
<Install Path>\ DPMLogs
DPM 2012:
<Install Path>\Program Files\Microsoft System Center 2012\DPM\DPMLogs
DPM 2012 Sp1:
<Install Path>\Program Files\Microsoft System Center 2012\DPM\DPMLogs
DPM 2012 R2:
<Install Path>\Program Files\Microsoft System Center 2012 R2\DPM\DPMLogs
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does
not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights." -
Database system was not properly shut down
Dear Mac community,
I have just repaired a friends 800 MHz 17" Flat Panel Display iMac... Somehow the hard drive had become badly corrupted and the system was frequently shutting itself down and freezing with kernel panics as a result. I managed to recover my friends data using Data Rescue II and after using Disk Warrior managed to do an Erase & Install of Mac OS X (10.4.4).
The iMac appears to be fine now except for one worrying thing that I have noticed in the console each time after restarting:
Mac OS X Version 10.4.4 (Build 8G32)
2006-02-02 16:20:47 +0000
2006-02-02 16:20:50.962 SystemUIServer[201] lang is:en
LOG: database system shutdown was interrupted at 2006-02-02 16:19:46 GMT
LOG: checkpoint record is at 0/87904C
LOG: redo record is at 0/87904C; undo record is at 0/0; shutdown FALSE
LOG: next transaction id: 550; next oid: 82855
LOG: database system was not properly shut down; automatic recovery in progress
LOG: ReadRecord: record with zero length at 0/87908C
LOG: redo is not required
LOG: database system is ready
Does anyone have an idea what this might be and how I can resolve the issue??
The systems performance doesn't appear to be affected in anyway however it looks and sounds ominous.
One other small thing I have noticed is that the iMac won't automatically put itself into sleep mode despite it being set to in the Energy Saver System Preferences. There are no external hardware devices attached such as a printer, firewire device, USB hub etc. I have reset the PRAM and NVRAM and this appears to have had no effect.
Any advice / suggestions greatly appreciated!!
Many thanks,
JustinMarking as answered as I managed to resolve the issue
-
Error ORA-01152: file 1 was not restored from a sufficiently old backup
Its also not thread just to share info with oracle gurus here.If my findings for the below workaround is wrong then please do correct me.
Sometime you get the error after performing restoring controlfile when you don't have autobackup controlfile on
error ORA-01152: file 1 was not restored from a sufficiently old backup
why?
Cause When you shutdown the database with using the normal,transactional or immediate options not abort a full checkpoint occurs.A full checkpoint ensures that all of the dirty blocks contained in the buffer cache are written to the data files,the database comes into synchronized state at this time i.e controlfile CKPT SCN=databasefile CKPT.
Like in this demo i am not taking backup the database in opened mode
Demo 1
SQL> archive log list
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 9
Current log sequence 11
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
SQL> alter database archivelog
2 /
Database altered.
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 9
Next log sequence to archive 11
Current log sequence 11
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN> connect target sys/sys
connected to target database: ORCL1 (DBID=1024798223)
RMAN> list backup
2> ;
using target database controlfile instead of recovery catalog
RMAN> backup database
2> ;
Starting backup at 08-DEC-07
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSTEM01.DBF
input datafile fno=00003 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSAUX01.DBF
input datafile fno=00002 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\UNDOTBS01.DBF
input datafile fno=00004 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 08-DEC-07
channel ORA_DISK_1: finished piece 1 at 08-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_08\O1_MF_NNNDF_TAG20071208T143558_3ONSCZBY_.BKP
comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 08-DEC-07
channel ORA_DISK_1: finished piece 1 at 08-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_08\O1_MF_NCSNF_TAG20071208T143558_3ONSFGN7_.BKP
comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:05
Finished backup at 08-DEC-07
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.Now i delete the controlfile from OS command.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
ORA-00205: error in identifying controlfile, check alert log for more infoi don't have automatized control file backup neither i have control file copy.What i will do
to recover control file i will restore controlfile from backup.Before doing it that i will bring
the database in mount state.
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
ORA-00205: error in identifying controlfile, check alert log for more infoi have two backup piece in my backupset folder you cant check control file backup
existence with list backup controlfile at RMAN prompt cause it needs database in
mount state.You will have to test both backup set pieces.
RMAN> restore controlfile from
'C:\oracle\flash_recovery_area\orcl1\ORCL1\BACKUPSET\2007_12_08\O1_MF_NCSNF_TAG20071208T143558_3ONSFGN7_.BKP';
Starting restore at 08-DEC-07
using channel ORA_DISK_1
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL01.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL02.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL03.CTL
Finished restore at 08-DEC-07
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs
2 /
Database altered.You can see database now comes into open mode without raising error error
ORA-01152: file 1 was not restored from a sufficiently old backup,you can see that
database shutdown with immediate which synchronized the control file with database
file.
Demo 2
------------Now in this demo i am taking backup the database in opened mode before backup
database i have deleted alls previous backup.
Database is in opened moder if i take the backup in database opened mode
(i.e full checkpoint will not occur controlfile CKPT SCN<>datafile CKPT SCN)
you will get the error when you will restore controlfile from backup set.
error ORA-01152: file 1 was not restored from a sufficiently old backup
Reason is that CKPT SCN in the datafiles will be ahead of the backupset control file no
full checkpoint occuring. You are not taking backup in consistent state and the
backupset will not be in consistent state.When you will restore the control file from
backupset then yours restored control file SCN will be lesser then yours datafile
checkpoint SCN.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
Database opened.
RMAN> backup database
2> ;
Starting backup at 11-DEC-07
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSTEM01.D
BF
input datafile fno=00003 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSAUX01.D
BF
input datafile fno=00002 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\UNDOTBS01.
DBF
input datafile fno=00004 name=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\USERS01.DB
F
channel ORA_DISK_1: starting piece 1 at 11-DEC-07
channel ORA_DISK_1: finished piece 1 at 11-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_11\O1_M
F_NNNDF_TAG20071211T125123_3OWJD0V5_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:56
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current controlfile in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 11-DEC-07
channel ORA_DISK_1: finished piece 1 at 11-DEC-07
piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\ORCL1\ORCL1\BACKUPSET\2007_12_11\O1_M
F_NCSNF_TAG20071211T125123_3OWJFT97_.BKP comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:09
Finished backup at 11-DEC-07now i shut down the database in order to delete the control file from os command
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> deleting the controlfile from oradata folder
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
ORA-00205: error in identifying controlfile, check alert log for more infonow i would restore the controlfile from backupset.
RMAN> restore controlfile from 'C:\oracle\flash_recovery_area\orcl1\ORCL1\BACKUP
SET\2007_12_11\O1_MF_NCSNF_TAG20071211T125123_3OWJFT97_.BKP'
2> ;
Starting restore at 11-DEC-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=159 devtype=DISK
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL01.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL02.CTL
output filename=C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\CONTROL03.CTL
Finished restore at 11-DEC-07
SQL> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs
2 /
alter database open resetlogs
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'C:\ORACLE10G\ORACLE\ORADATA\ORCL1\ORCL1\SYSTEM01.DBF'what would you do that now you have lost controlfile ,you dont have copy either you dont
have autobackup on for controlfile,you need to create the control file
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount
ORACLE instance started.
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
SQL> create controlfile reuse database orcl1 noresetlogs archivelog
2 MAXLOGFILES 50
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 300
5 MAXINSTANCES 8
6 MAXLOGHISTORY 500
7 LOGFILE
8 GROUP 1 'C:\oracle10g\oracle\oradata\orcl1\orcl1\redo01.LOG',
9 GROUP 2 'C:\oracle10g\oracle\oradata\orcl1\orcl1\redo02.LOG',
10 GROUP 3 'C:\oracle10g\oracle\oradata\orcl1\orcl1\redo03.LOG'
11 DATAFILE
12 'C:\oracle10g\oracle\oradata\orcl1\orcl1\SYSAUX01.DBF',
13 'C:\oracle10g\oracle\oradata\orcl1\orcl1\SYSTEM01.DBF',
14 'C:\oracle10g\oracle\oradata\orcl1\orcl1\UNDOTBS01.DBF',
15 'C:\oracle10g\oracle\oradata\orcl1\orcl1\USERS01.DBF'
16
SQL> /
Control file created.
SQL> alter database open
2 /
Database altered.KhurramNo need to manually recreate the controlfile. Simply issue RECOVER DATABASE prior to opening database.
E:\>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Dec 30 01:22:34 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup
Oracle instance started
database mounted
database opened
Total System Global Area 612368384 bytes
Fixed Size 2006192 bytes
Variable Size 239076176 bytes
Database Buffers 364904448 bytes
Redo Buffers 6381568 bytes
RMAN> backup database;
Starting backup at 30-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=148 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=E:\ORACLE\ORADATA\ORA10G\SYSTEM01.DBF
input datafile fno=00002 name=E:\ORACLE\ORADATA\ORA10G\UNDOTBS01.DBF
input datafile fno=00003 name=E:\ORACLE\ORADATA\ORA10G\SYSAUX01.DBF
input datafile fno=00004 name=E:\ORACLE\ORADATA\ORA10G\USERS01.DBF
channel ORA_DISK_1: starting piece 1 at 30-DEC-07
channel ORA_DISK_1: finished piece 1 at 30-DEC-07
piece handle=D:\DB_BACKUPS\12J4S23M_1_1.BKP tag=TAG20071230T012302 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:35
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
including current control file in backupset
including current SPFILE in backupset
channel ORA_DISK_1: starting piece 1 at 30-DEC-07
channel ORA_DISK_1: finished piece 1 at 30-DEC-07
piece handle=D:\DB_BACKUPS\13J4S26L_1_1.BKP tag=TAG20071230T012302 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:03
Finished backup at 30-DEC-07
RMAN> shutdown immediate
database closed
database dismounted
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
E:\>del e:\oracle\oradata\ora10g\*.ctl
E:\>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Dec 30 01:25:39 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup
Oracle instance started
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 12/30/2007 01:25:56
ORA-00205: error in identifying control file, check alert log for more info
RMAN> restore controlfile from 'D:\DB_BACKUPS\13J4S26L_1_1.BKP';
Starting restore at 30-DEC-07
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
output filename=E:\ORACLE\ORADATA\ORA10G\CONTROL01.CTL
output filename=E:\ORACLE\ORADATA\ORA10G\CONTROL02.CTL
output filename=E:\ORACLE\ORADATA\ORA10G\CONTROL03.CTL
Finished restore at 30-DEC-07
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 12/30/2007 01:27:33
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'E:\ORACLE\ORADATA\ORA10G\SYSTEM01.DBF'
RMAN> recover database;
Starting recover at 30-DEC-07
Starting implicit crosscheck backup at 30-DEC-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 1 objects
Finished implicit crosscheck backup at 30-DEC-07
Starting implicit crosscheck copy at 30-DEC-07
using channel ORA_DISK_1
Finished implicit crosscheck copy at 30-DEC-07
searching for all files in the recovery area
cataloging files...
no files cataloged
using channel ORA_DISK_1
starting media recovery
archive log thread 1 sequence 1 is already on disk as file E:\ORACLE\ORADATA\ORA10G\REDO03.LOG
archive log filename=E:\ORACLE\ORADATA\ORA10G\REDO03.LOG thread=1 sequence=1
media recovery complete, elapsed time: 00:00:02
Finished recover at 30-DEC-07
RMAN> alter database open resetlogs;
database opened
RMAN> shutdown immediate
database closed
database dismounted
Oracle instance shut down
RMAN> startup
connected to target database (not started)
Oracle instance started
database mounted
database opened
Total System Global Area 612368384 bytes
Fixed Size 2006192 bytes
Variable Size 247464784 bytes
Database Buffers 356515840 bytes
Redo Buffers 6381568 bytes
RMAN> -
ORA-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA
Hi
i installed a fresh oracle linux and installes 11.2.0 database server. the server works fine but i have a proplem to connect to the database from a windows 2008 r2
client. For the client connection i installed the oracle instantclient on the windows system. Now i want to configure the system dsn to connect to the oracle
server like this
data source description: vSphere 64
description: ----
TNS Service Name: VCDB
user id: system
then i go to TEST connection
Service Name: VCDB
user name: system
Password: mypassword
so i copied the tnsnames.ora from the server to the client
then i get
ora-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA
here´s my tnsnames.ora from the client
VCDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.31.98.173)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vcdb.vmware)
i tested serveral config´s but nothing works. I can ping the server and also i cn telnet the server on port 1521. The listener on the server works fine
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-SEP-2010 20:48:52
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vc-db1.mydomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-SEP-2010 20:47:45
Uptime 0 days 0 hr. 1 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/vc-db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vc-db1mydomain)(PORT=1521)))
Services Summary...
Service "vcdb.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
Service "vcdbXDB.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
The command completed successfully
but it´s not possible to create a connection to the server. My enviroment variables are this
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_HOSTNAME=vc-db1.mydomain
ORACLE_SID=vcdb
ORACLE_TERM=xterm
so i think on the server site everything is correct. How could i establish a connection from the windows client
to the linux database server. Or is ODBC the wrong method for this?
Kind regards
ACID25Hi,
Check the listener log and see if the connection information is logged (in this case with error)
If logged, then we are reaching the correct listener.
Then check tnsping VCDB works fine along with sqlplus connection through listener using VCDB as connect string.
If above both works, then issue can be isolated to ODBC configuration or setup issue.
In case even if the tnsping / sqlplus is failing to connect with VCDB, then worth taking a client sqlent trace at level 16 and listener trace at level 16 to analyse the issue further.
Thanks,
Sathya -
ORA-01152: file 1 was not restored from a sufficiently old backup
Hi,
I have restored the control file from auto-backup, but some of my archive logs are missing...
when I am recovering it as
RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE;
ORA-00279: change 37158334186 generated at 02/19/2012 02:53:11 needed for
thread 1
ORA-00289: suggestion : /u07/oradata/main/arch/main_738330900_118084_1.dbf
ORA-00280: change 37158334186 for thread 1 is in sequence #118084
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u02/oradata/main/system01.dbf'
and
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u02/oradata/main/system01.dbf'
how to sort out this issue, I just want to open the database in whatever mode.
Please help me.If no - then startup in mount state and make this file offline.This is archive log file. Might you thought it as datafile ;-)
@OP.
Once again i suggest you to refer what aman said below.
Aman.... wrote:
This has been discussed already couple of times, tried using the search ?
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01152%3A+file+1+was+not+restored+from+a+sufficiently+old+backup&objID=f61&dateRange=all&userID=&numResults=15
Aman....Also check tihs. but but but but its not an supported format, it can be uesd when there are no other options.
*RECOVER A DATAFILE WITH MISSING ARCHIVELOGS [ID 418476.1]*
Edited by: CKPT on Feb 21, 2012 12:11 PM -
RMAN Restore on Test DB Fails - ORA-01152:file 1 was not restored from blah
Calling all RMAN Gurus!
I'm having trouble recovering an RMAN backup on my test DB server. Please Help!
Solaris 10/Oracle 10.2.0.4 Standard Edition (Both Servers)
Part one - Step by Step
Primary Server
1. Perform full backup: backup database plus archivelog;
2. Copy Backupset & Controlfile to test server: "RSYNC/NFS Mount"
Test Server
1. rman target /
2. startup nomount;
3. restore controlfile blah blah
4. alter database mount;
5. catalog backuppiece
6. restore database; - no issues
*7. recover database noredo; - no issues*
*8. alter database open resetlogs;*
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/09/2009 08:48:22
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/data/oracle/oradata/planodb/system01.dbf'
All is good until I try and open the database. What am I missing?? Why doesn't this work???
Because .... If I go through the exact steps but I perform a "recover database" instead of "recover database noredo", I can open the database!!!
Example :
6. restore database; no issues
7. recover database;
Starting recover at 09-SEP-09
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=34
channel ORA_DISK_1: reading from backup piece /data/oracle/orabase/backup/backup
set/2009_09_09/o1_mf_annnn_BACKUP_PLANODB_000_0_5bgkffqq_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/data/oracle/orabase/backup/backupset/2009_09_09/o1_mf_annnn_BACKUP
PLANODB000_0_5bgkffqq_.bkp tag=BACKUP_PLANODB_000_090909010005*
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
archive log filename=/data/oracle/oradata/arch/PLANODB/archivelog/2009_09_09/o1_
mf_1_34_5bhdkwd4_.arc thread=1 sequence=34
channel default: deleting archive log(s)
archive log filename=/data/oracle/oradata/arch/PLANODB/archivelog/2009_09_09/o1_
mf_1_34_5bhdkwd4_.arc recid=42 stamp=697106925
unable to find archive log
archive log thread=1 sequence=35
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/09/2009 08:48:52
RMAN-06054: media recovery requesting unknown log: thread 1 seq 35 lowscn 1425007
This is ok because seq 35 doesn't actually exist!
8. alter database open resetlogs;
database opened!You could also explore the UNTIL clause of the RECOVER DATABASE command to specify Recovery until a specific Log, SCN or Timestamp.
Since you are cloning a Hot Backup to another server the Recovery has to be an Incomplete Recovery. So, it will be to a Log, SCN or Timestamp -- either of which you could also explicitly specify with the UNTIL clause.
Hemant K Chitale
http://hemantoracledba.blogspot.com -
Hi Guys,
I got this already discussed error and I am sorry, to start a new topic, but I just have no idea what to do else.
I have oracle11g - 32 bit running on my Windows 7 64 bit machine.
The database-server is running fine according to the Database-Control Webinterface.
Connecting with SQLPlus also works
Now my application tries to connect to
Server: localhost
Database: orcl
User: System
PW: myPw
I get: ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
I was reading many threads here and so I tried to configure the standard-listener using the netmanager with an additional SID named "orcl" which results in this listener.ora:
Line: -----
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\Andinger\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\Andinger\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle8)
(SID_NAME = ORCL)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Andband)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\Andinger
Line: -----
This is my tnsnames.ora
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Andband)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Line: -----
What else could I check? What else could be the reason, that it doesn't work.
I appreciate any help, suggestins, hints... :)
Thanks
Andy
Edited by: 943829 on 01.07.2012 04:56
Edited by: 943829 on 01.07.2012 04:57Thanks for your fast reply!
Attached all the stuff you asked for:
First the result of tnsping:
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2
012 19:19:33
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Parameterdateien benutzt:
E:\app\Andinger\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Adapter EZCONNECT zur Aufl÷sung des Alias benutzt
Verbindungsversuch mit (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROT
OCOL=TCP)(HOST=fe80::341a:eb0:3f57:ff6d%13)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(H
OST=192.168.0.146)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=2001:0:5ef5:79fb:341a
:eb0:3f57:ff6d)(PORT=1521)))
OK (20 ms)
This is the content of sqlnet.ora
# sqlnet.ora Network Configuration File: E:\app\Andinger\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
The status of the Listener:
C:\Users\Andinger>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2012 19:23
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Andband)(PORT=1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Startdatum 01-JUL-2012 13:07:18
Uptime 0 Tage 6 Std. 16 Min. 7 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener E:\app\Andinger\product\11.2.0\dbhome_1\network\admi
n\listener.ora
Log-Datei des Listener e:\app\andinger\diag\tnslsnr\Andband\listener\alert\lo
g.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Andband)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "Oracle8" hat 1 Instanzen.
Instanz "ORCL", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "orcl" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Dienst "orclXDB" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Der Befehl wurde erfolgreich ausgef³hrt.
And the Listener Service information:
C:\Users\Andinger>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2012 19:24
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Andband)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:0 abgewiesen:0
LOCAL SERVER
Dienst "Oracle8" hat 1 Instanzen.
Instanz "ORCL", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:12 abgewiesen:0
LOCAL SERVER
Dienst "orcl" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" festgelegt:371 abgelehnt:0 Status:ready
LOCAL SERVER
Dienst "orclXDB" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"D000" eingerichtet:0 abgewiesen:0 aktuell:0 max:1022 Status:ready
DISPATCHER <machine: ANDBAND, pid: 3980>
(ADDRESS=(PROTOCOL=tcp)(HOST=Andband)(PORT=49189))
Der Befehl wurde erfolgreich ausgef³hrt.
I hope that you understand it. I installed a german version. If it is a problem, I can install the english version. -
The settings on the tab for "delegate" was not properly stored.
Hello group,
I try to write it in english - but it is a try only *g
Since last week I can´t set or delete any user or groups from the delegate tab.
Only User in the IT OU can set delegates. I´ve compare the users with acldiag and I can´t see any differnce.
I´ve try to move the users to the IT OU but the problem is the same.
New Users have the same problem. I´ve copy a User that can set delegates but the copied user can´t set it.
Die Einstellungen auf der Registerkarte für "Stellvertretungen" wurde nicht
korrekt gespeichert. Liste zum Senden im Auftrag kann/können nicht aktiviert werden.
Sie besitzen nicht die erforderliche Berechtigungen, um diesen Vorgang mit diesem Objekt auszuführen.
I´ve translate the error message with google language tools.
The settings on the tab for "delegate" was not
properly stored. List to send in the order can or can not activated will.
You do not have the required permissions to perform this operation with this object.
Our enviroment is a single W2k3R2 Domain with 2 Ex2k3 and 1 Ex2k7 Server.
Thx for any help!!
Kind Regards
Denis Ecklerhttp://www.ewig-drohendes-versagen.de
ICE 2009 I´ll be there -> http://www.ice-lingen.de/Hi Denis,
At this time, I suggest you apply following hotfix on a problem Outlook 2007 client to check whether the error still exists:
Error message when you try to add a delegate in Outlook 2007: "The Delegates settings were not saved correctly"
http://support.microsoft.com/default.aspx?scid=kb;EN-US;950794
I would like to explain that the hotfix is included in Office 2007 Service Pack 2. Therefore, you can simple install SP2 on Outlook 2007 and create the registry key indicated in the KB article.
Please understand that before this hotfix was created, the "Send on Behalf" (PublicDelegates) permission was considered a mandatory part of adding a delegate. This hotfix lets you add the delegate without setting the "Send on Behalf" (PublicDelegates) property.
The "Send on Behalf" permission is not needed for meeting-related messages. Therefore, even without the "Send on Behalf" permission, delegates can successfully send meeting requests and responses on behalf of the calendar owner. However, when you use a delegate that does not have the "Send on Behalf" permission to send a non-meeting-related message on behalf of the owner, the operation fails.
After installing the hotfix and apply the registry key change, if the error can be resolved, we can conclude that the issue occurs due to Outlook is not able to update the PublicDelegates attribute successfully due to permission issue. After your previous post, I notice the issue occurs even if you create a new user.
At this time, would you please let me know whether the new user belongs to any group (except domain users)? I also suggest you use DSACLS tool to export the ACLs of the user object to check whether acl may reject the user to update AD attribute.
DSACLS “distinguished name of the user object” >acls.txt
Thanks,
Mike -
ORA-02041: client database did not begin a transaction
Hello All,
I am making calls from oracle 8i to oracle 9i.
First i am inserting values from 8i into a table in 9i.
secondly i am calling a procedure to send mail which again is in 9i database.
If i run the query ..the mail is sent...
if i run it for the second time i get this error
ORA-00164: autonomous transaction disallowed within distributed transaction
ORA-02041: client database did not begin a transaction
If i run it again...The mail is sent...
For every odd transaction the mail is sent and for every even transaction i get this error...Please advice me if you have any tips how i can resolve this..
Thanks,
AKIt is maybe not exaclty the same situation but this thread may help you:
http://asktom.oracle.com/pls/ask/f?p=4950:8:16455356983632477090::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:362818006460 -
I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful. -
Extension could not be loaded because it was not properly signed
Followed the steps on the tutorial to get an extension created in eclipse. I can export it and run it just fine, but it won't load when running from eclipse. I get the error: "extension could not be loaded because it was not properly signed." I can't seem to find where to configure this. Any help is appreciated.
Thanks for the help. Yes that addressed the issue.
On a side note, the tutorial I followed was the one that came with the plugin. Specifically I'm referring to the following file:
//<eclipse_path>/plugins/com.adobe.cside.html.docs_1.0.0.201307260955/doc/getting_started/ Create_Your_Own_HTML5_Extension_In_5_Minutes.htm
This is the HTML page for the "Create Your Own HTML5 Extension In 5 Minutes" walkthrough. It makes no mention of changing "PlayerDebugMode". I downloaded the eclipse plugin from the following link:
http://labs.adobe.com/downloads/extensionbuilder3.html
Is there a more up to date plugin? Where is the documentation that references changing the settings you mentionned?
Maybe you are looking for
-
How do I update my Nik Plug Ins for LR 5 to the latest release?
Nik has a new release (1.1.1.1) and the Plug In version I have in LR 5 is 1.1.1.0. How do I update the Nik Plug In's? I have Lightroom through the Creative Cloud and usually get my updates there.
-
Nokia N8 Can not see who's calling / display won't...
Hi, I have the problem that when I get a call my phone will ring but there is nothing seen onto the display. When I use the unlock button on the side of the phone it unlocks and then I can see who's calling and take the call. When I want to hang-up,
-
Could not deploy my project in unix environment
I am using windows for development environment, my code was deploying fine in windows environment. But when i tried to deploy in unix environment I got this error bpel_IRobo_Workflow1_1.0.jar failed to deploy. Error while loading process. The process
-
I'm trying to convert several .tiff files to .jpg files. I had scanned all these files in about the same time at the same settings. However some of the .tiff files won't let me convert to .jpg files. I'm using the 'process multiple files' feature. Wh
-
Icon images not previewing file content
I installed Leopard on MacBook Pro and on a G5 iMac. On the latter computer, the desktop file icons (iWorks document and others) display a preview of the document, but on the MacBook Pro, the icons display an image of the application. Minor issue, bu