ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] []

HI,
I AM USING ORACLE 11G R2 DATABASE IN WINDOWS XP SERVICE PACK 2 64 BIT PROCESSOR . I GET THE FOLLOWING ERROR OFTEN
Errors in file d:\app\administrator\diag\rdbms\sipdb\sipdb\trace\sipdb_ora_4860.trc:
ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] [] []
Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0xF8] [PC:0x1B50DCC, qksctxDump()+1616]
Errors in file d:\app\administrator\diag\rdbms\sipdb\sipdb\trace\sipdb_ora_4860.trc (incident=17352):
ORA-07445: exception encountered: core dump [qksctxDump()+1616] [ACCESS_VIOLATION] [ADDR:0xF8] [PC:0x1B50DCC] [UNABLE_TO_READ] []
ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] [] []
Incident details in: d:\app\administrator\diag\rdbms\sipdb\sipdb\incident\incdir_17352\sipdb_ora_4860_i17352.trc
I WANN KNOW THE CAUSE AND SOLUTION FOR THIS ERROR

Hi OP,
ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] [] []This is an internal error, you need to contact ORACLE SUPPORT..
Hi Ogan,
you cannot find ora-3137 errors in ora-600/7445 lookup tool(which was not updated)
Thanks
Edited by: CKPT on Oct 6, 2010 1:04 PM

Similar Messages

ORA-03137: TTC protocol internal error : [12333] [4] [195] [56] [] [] [] []

Hi All,
I am getting these errors daily in oracle alert logs.
ORA-03137: TTC protocol internal error : [12333] [4] [195] [56] [] [] [] [] Sun Aug 14 14:07:12 2011
ORA-03137: TTC protocol internal error : [12333] [4] [195] [47] [] [] [] [] Sun Aug 14 21:07:32 2011
ORA-03137: TTC protocol internal error : [12333] [4] [195] [56] [] [] [] []
Fri Aug 12 01:58:10 2011
ORA-03137: TTC protocol internal error : [12333] [5] [196] [28] [] [] [] [] Fri Aug 12 02:12:43 2011
ORA-03137: TTC protocol internal error : [12333] [5] [196] [28] [] [] [] [] Fri Aug 12 02:28:45 2011
ORA-03137: TTC protocol internal error : [3120] [] [] [] [] [] [] [] Fri Aug 12 04:08:45 2011
ORA-03137: TTC protocol internal error : [3120] [] [] [] [] [] [] [] Fri Aug 12 04:48:43 2011
ORA-03137: TTC protocol internal error : [1010] [] [] [] [] [] [] [] Fri Aug 12 05:26:48 2011
ORA-03137: TTC protocol internal error : [12333] [5] [196] [28] [] [] [] [] Fri Aug 12 06:02:46 2011
ORA-03137: TTC protocol internal error : [12333] [5] [196] [28] [] [] [] [] Fri Aug 12 06:10:07 2011
ORA-03137: TTC protocol internal error : [3120] [] [] [] [] [] [] [] Fri Aug 12 06:39:11 2011
ORA-03137: TTC protocol internal error : [12333] [254] [64] [44] [] [] [] [] Fri Aug 12 08:47:24 2011
ORA-03137: TTC protocol internal error : [12333] [254] [64] [44] [] [] [] [] Fri Aug 12 10:06:56 2011
ORA-03137: TTC protocol internal error : [12333] [254] [64] [44] [] [] [] [] Fri Aug 12 16:10:08 2011
ORA-03137: TTC protocol internal error : [12333] [5] [196] [35] [] [] [] [] Fri Aug 12 16:57:37 2011
ORA-03137: TTC protocol internal error : [12333] [11] [77] [97] [] [] [] [] Fri Aug 12 17:02:39 2011
ORA-03137: TTC protocol internal error : [12333] [50] [44] [53] [] [] [] [] Fri Aug 12 17:19:22 2011
ORA-03137: TTC protocol internal error : [12333] [254] [64] [44] [] [] [] []
Platform : Solaris: Version 11.1.0.7.0
Thanks,

Hi;
Please close this thread as answered and keep updating your other thread:
Re: ORA-03137: TTC protocol internal error : [12333] [4] [195] [56] [] [] [] []
Regard
Helios

SDMWB - ORA-03137: TTC protocol internal error : [3120]

Hello,
Customer is trying to migrate MS Access 2003 to Oracle database 11.1.0.6 using APEX 3.1.1 and SQL developer 1.5. He has used APEX 3.1.1 exporter the most. He ran the exporter for Access 2003 and got an xml file and sqlfile.
He created a repository fine in SQL Developer 1.5.
When he tries to capture the export XML file he gets the above error in the window and the Capture process either stops or hangs.
Seems like Apex 3.1.1 can read the *.sql file
SQL Developer 1.5 cannot process the *.xml file
Does anybody know why this is happening?
Thanks,
Jose Franco

Hi;
Please close this thread as answered and keep updating your other thread:
Re: ORA-03137: TTC protocol internal error : [12333] [4] [195] [56] [] [] [] []
Regard
Helios

ORA-03137: TTC protocol internal error

Hi
We created a new database and trying to connect from this database to Oracle access manager at AS400.We added the new instance on oracel access manager Tnsnames.
The connection is failing and the error I see in alert log file is
ORA-03137: TTC protocol internal error : [12333] [14] [0] [68] [] [] [] []
We are able to connect to the other database on same server .
Please help .
Oracle Version : Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production

user8940828 wrote:
Hi
We created a new database and trying to connect from this database to Oracle access manager at AS400.We added the new instance on oracel access manager Tnsnames.
The connection is failing and the error I see in alert log file is
ORA-03137: TTC protocol internal error : [12333] [14] [0] [68] [] [] [] []
We are able to connect to the other database on same server .
Please help .
Oracle Version : Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Productionbcm@bcm-laptop:~$ oerr ora 3137
03137, 00000, "TTC protocol internal error : [%s] [%s] [%s] [%s] [%s] [%s] [%s] [%s]"
// *Cause: TTC protocol internal error.
// *Action: Contact Oracle Support Services.

ORA-03137: TTC protocol internal error : [1010] [] [] [] [] [] [] [

Hi
Database 11.1.0.6
OS: EL 5
Hi I'm frequently getting this error in the database alert log:
ORA-03137: TTC protocol internal error : [1010] [] [] [] [] [] [] [
and the database got shutdown.
Anybody has any idea how to troubleshoot?

03137, 00000, "TTC protocol internal error : [%s] [%s] [%s] [%s] [%s] [%s] [%s] [%s]"
// *Cause: TTC protocol internal error.
// *Action: Contact Oracle Support Services.

ORA-03137: TTC protocol internal error : [3113] [] [] [] [] [] [] []

Hi All,
I am getting these errors very often in oracle alert logs.
My DB version es 11.2.0.4, it's on a 3 node RAC, the OS version is OEL 6.4
Dumping diagnostic data in directory=[cdmp_20140130092235], requested by (instance=1, osid=17753), summary=[incident=45214].
Thu Jan 30 09:38:08 2014
Errors in file /u01/app/oracle/diag/rdbms/dbname/iname/trace/iname_ora_57038.trc (incident=33273):
ORA-03137: TTC protocol internal error : [3113] [] [] [] [] [] [] []
Incident details in: /u01/app/oracle/diag/rdbms/dbname/iname/incident/incdir_33273/iname_ora_57038_i33273.trc
Thu Jan 30 09:38:09 2014
Dumping diagnostic data in directory=[cdmp_20140130093809], requested by (instance=2, osid=57038), summary=[incident=33273].
Thu Jan 30 09:38:11 2014
Sweep [inc][33273]: completed
Sweep [inc2][33273]: completed
Thu Jan 30 09:41:31 2014
Dumping diagnostic data in directory=[cdmp_20140130094247], requested by (instance=1, osid=25288), summary=[incident=45152].
I already send the SR to Oracle but haven't gotten the answer yet, also I tried the ora-600 error lookup tool from Oracle Support site but couldn't find anything with the parameter [3113] neither on Internet.
Please help...
Thanks !!!

Hi,
Please refer to the below mentioned document to review the compatibility matrix and support situation between Oracle client and database
Ref: Client / Server / Interoperability Support Matrix For Different Oracle Versions (Doc ID 207303.1)
The document clearly shows that the 9.2.0.8 is no longer supported with 11.2 database. Please use a higher client version to avoid such errors.
Regards,
Vandana - Oracle

ORA 3137 TTC protocol internal error

Hi,
I have a new DB 11.2.0.1.
I sent in alert and trace directory but I didnt find any information.
I need help, could somebody send me?

The file ../alert/ is
<msg time='2013-01-17T08:32:11.627+01:00' org_id='oracle' comp_id='rdbms'
msg_id='2264250469' type='INCIDENT_ERROR' level='1'
host_id='bender' host_addr='192.168.12.7' prob_key='ORA 3137 [12333]'
upstream_comp='' downstream_comp='' ecid=''
errid='640260' detail_path='/u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_ora_28186.trc'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_ora_28186.trc (incident=640260):
ORA-03137: Error interno de protocolo TTC: [12333] [5] [196] [6] [] [] [] []
The file ../trace/ is
hstpro: 6
hstccs: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.12.7)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ORCL)(CID=(PROGRAM=F:\Calzados\bin\mic2000.exe)(HOST=PC-FELIX)(USER=OFICINA))))
--- dump of hsttti ---
00AA4B550 00 04 01 0C 0E 09 0B 0F 04 0A 03 03 01 00 00 0A [................]
00AA4B560 00 00 00 00 00 2F 30 01 01 01 01 01 01 01 01 01 [...../0.........]
00AA4B570 06 06 00 00 00 00 00 07 03 03 00 00 00 00 00 00 [................]
00AA4B580 00 00 00 00 00 00 00 00 00 00 13 00 00 00 00 00 [................]
00AA4B590 00 00 00 00 0C 00 00 00 00 00 14 00 00 00 00 00 [................]
00AA4B5A0 00 00 00 00 00 00 00 00 00 00 00 0D 00 00 11 11 [................]
00AA4B5B0 04 09 00 00 01 01 05 00 22 00 12 00 13 13 15 15 [........".......]
00AA4B5C0 17 17 17 17 21 03 00 00 03 13 13 13 00 00 00 00 [....!...........]
00AA4B5D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [................]
00AA4B5E0 00 00 04 2E 00 00 00 00 0F 0F 0F 1F 20 00 00 00 [............ ...]
00AA4B5F0 00 00 00 00 00 00 00 00 00 00 00 00 0F 00 00 00 [................]
00AA4B600 00 00 01 01 01 01 01 01 2A 2A 2A 2A 2A 2B 2B 00 [........*****++.]
00AA4B610 00 00 00 23 23 23 00 00 00 00 00 00 00 00 00 00 [...###..........]
00AA4B620 22 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ["...............]
00AA4B630 00 00 00 00 00 00 00 35 2A 05 00 00 00 00 00 00 [.......5*.......]
00AA4B640 00 13 00 00 00 00 00 00 00 00 00 00 00 00 00 36 [...............6]
00AA4B650 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [................]
00AA4B660 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [................]
00AA4B670 00 00 03 01 03 01 01 00 00 00 03 03 03 01 03 03 [................]
00AA4B680 03 03 01 01 03 03 03 03 03 03 00 03 03 03 03 01 [................]
00AA4B690 03 03 03 03 00 00 00 03 03 03 00 03 00 03 03 03 [................]
00AA4B6A0 03 03 01 03 03 03 03 01 03 03 01 00 03 01 00 00 [................]
00AA4B6B0 00 00 03 03 00 00 00 03 00 00 00 03 00 00 00 00 [................]
00AA4B6C0 00 00 00 00 00 00 00 00 00 00 00 00 03 03 03 03 [................]
00AA4B6D0 03 03 03 03 03 03 03 01 00 03 03 01 01 03 03 03 [................]
00AA4B6E0 03 03 00 00 03 03 03 03 00 00 00 00 00 03 03 03 [................]
00AA4B6F0 03 03 03 03 03 03 03 03 03 03 03 03 00 03 03 03 [................]
00AA4B700 03 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [................]
00AA4B710 00 03 03 00 00 00 03 03 03 03 03 03 03 03 03 03 [................]
00AA4B720 00 00 03 03 03 03 03 03 03 03 03 03 03 03 03 03 [................]
*** 2013-01-17 08:32:12.081
Incident 640260 created, dump file: /u01/app/oracle/diag/rdbms/orcl/orcl/incident/incdir_640260/orcl_ora_28186_i640260.trc
ORA-03137: Error interno de protocolo TTC: [12333] [5] [196] [6] [] [] [] []
ttcdrvdmplocation: msg-0 ln-252 reporting 3137
Dumping 'Buffer dump info:' addr=0xaafaf40 size=978 bytes
Dump of memory from 0xaafaf40 to 0xaafb314
00AAFAF40 01EE6911 00000002 00000003 00000006 [.i..............]
00AAFAF50 69EF5E03 00000081 01000000 0000032F [.^.i......../...]
00AAFAF60 00000D01 00010000 01000000 00000000 [................]
00AAFAF70 01000000 00000001 00000000 00000101 [................]
00AAFAF80 00000000 01000000 4553FFFE 5443454C [..........SELECT]
00AAFAF90 41525420 53415053 4E2E534F 52544D55 [ TRASPASOS.NUMTR]
00AAFAFA0 41505341 202C4F53 20200A0A 20202020 [ASPASO, .. ]
00AAFAFB0 41525420 53415053 462E534F 41484345 [ TRASPASOS.FECHA]
and the _optim_peek_user_binds=TRUE

ORA-03137: TTC protocol,ORA-07445

Hi Gurus,
I am having oracle 11g(11.0.1.6.0) on Windows platform . Frequently i am getting these errors in my production database alert log file..
ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] [] []
Exception [type: ACCESS_VIOLATION, UNABLE_TO_READ] [ADDR:0xF8] [PC:0x1B50DCC, qksctxDump()+1616]
Errors in file d:\app\administrator\diag\rdbms\sipdb\sipdb\trace\sipdb_ora_4772.trc (incident=18292):
ORA-07445: exception encountered: core dump [qksctxDump()+1616] [ACCESS_VIOLATION] [ADDR:0xF8] [PC:0x1B50DCC] [UNABLE_TO_READ] []
ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] [] []
Can any one tell me in details :-
*1. What are the reasons for this error?*
*2. What should i do to resolve this error?*
*3.Is this error is critical or it can be avoided?*
Thanks & Regards,
Vikash Charuadia(DBA Trainee)

$ oerr ora 7445
07445, 00000, "exception encountered: core dump [%s] [%s] [%s] [%s] [%s] [%s]"
// *Cause: An OS exception occurred which should result in the creation of a
// core file. This is an internal error.
// *Action: Contact your customer support representative.ORA-07445 are due most of the time to Oracle bugs: try to find a patch or a workaround on My Oracle Support.
Edited by: P. Forstmann on 27 déc. 2010 08:28

Re: ORA-28041: Authentication protocol internal error

Hi,
I am getting similar error,
can anyone help on it
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04004: error from recovery catalog database: ORA-28041: Authentication protocol internal error
Thanks in advance.

abdo.89 wrote:
Hi,
I am getting similar error,
can anyone help on it
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04004: error from recovery catalog database: ORA-28041: Authentication protocol internal error
Thanks in advance.
And what did your research on ORA-28041 turn up?
Let me google that for you

Ora-03137 ttc Error

Hi,
i got this ora-03137 ttcp protocol error......can anyone explain me the cause of the error and solution for it????

oerr ora 3137
03137, 00000, "TTC protocol internal error : [%s] [%s] [%s] [%s] [%s] [%s] [%s] [%s]"
// *Cause: TTC protocol internal error.
// *Action: Contact Oracle Support Services.what did you do to get this error?
ALWAYS
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version;
Is any type of Operating System Virtualization installed on this system.

Ora-03137 ttcp protocol error

Hi
ora-03137 ttcp protocol error.....i am using oracle database 11g release2 and operating system is windows xp service pack 2, 64 bit processor....plz tell me the causes for the error and solution
for it.
Edited by: 793097 on Sep 6, 2010 10:14 PM

Hi, this error can be related to the network problem. This tells that the connection between the client and server dropped for some reason.
May be there is some network dis connectivity or firewall or even bug in the software or in database itself.
regards

Unable to create database due to ORA-12560, TNS protocol adapter error

Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.

hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa.

How to solve the ORA-12560: TNS:protocol adapter error

    Hello All,
          when i am am trying to connecting the database i am getting the error ORA-12560: TNS:protocol adapter error
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>set oracle_sid=QUANTUM
C:\Windows\system32>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jul 15 12:54:50 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
My TNS File is below : -
# tnsnames.ora Network Configuration File: C:\app\Onkar\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
QVS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = qvs)
LISTENER_QVS =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
Oradb11g_home1=
(DESCRIPTION=
    (ADDRESS_LIST=
      (ADDRESS=(PROTOCOL=TCP)(HOST=115.111.50.61)(PORT=1522))
    (CONNECT_DATA=
      (SERVER=DEDICATED)
      (SERVICE_NAME=test)
Listener :-
# listener.ora Network Configuration File: C:\app\Onkar\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\Onkar\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Onkar\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
      (SID_NAME = QUANTUM)
      (ORACLE_HOME = C:\app\Onkar\product\11.2.0\dbhome_1)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Onkar\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\onkar
sqlnet .ora :-
# sqlnet.ora Network Configuration File: C:\app\Onkar\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
Reply Quick:-
PLZZZZZ
Thanks in advance:-
shekhar

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>set oracle_sid=QUANTUM
C:\Windows\system32>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Jul 15 12:54:50 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
This is a local connection (called an internal connect in the old days). The connection does not go via the Listener. It is a local IPC connection. And as you can see, you do not supply a database schema and password as credentials - the o/s user and environment need to provide the credentials.
So I would not expect a TNS protocol adapter error, as this usually indicates a network driver related problem.
For a local IPC connection to work, TWO_TASK must not be set, and ORACLE_SID and ORACLE_HOME must be set (and valid). The local client driver needs to launch an Oracle server process (dedicated server process to service the client driver). It finds that executable in ORACLE_HOME/bin. Next it needs that server process to "attach" itself to the database's brains (the SGA). This shared memory area is identified via the ORACLE_HOME and ORACLE_SID variables.
There also is a requirement that the dedicated server process created, has the o/s permissions to attach to the SGA - which means it needs to be run as the same o/s user as the owner of the shared memory (in other words, the client should be running in the same o/s user as the database processes).
Thus the need to have these variables set. And no need for using a Listener - it is not a factor.

ORA-12560: TNS:protocol adapter error rman

hello all,
i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA....
I droped the database to do a test restore...but i cant even login to rman or sqlplus ??? i was able to login to rman before to take a backup....but now i cant.... could not figure out why...any help would be appericiated....
C:\oracle\sql>set ORACLE_SID=comp
C:\oracle\sql>
C:\oracle\sql>echo %ORACLE_SID%
comp
C:\oracle\sql>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 09:54:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12560: TNS:protocol adapter error
C:\oracle\sql>
C:\oracle\sql>
C:\oracle\sql>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUL-2011 09:54:20
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxxxxxx)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date                06-JUL-2011 09:53:53
Uptime                    0 days 0 hr. 0 min. 26 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File         C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxxxx)(PORT=1521)))
Services Summary...
Service "COMP" has 1 instance(s).
Instance "COMP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\oracle\sql>

user8363520 wrote:
hello all,
i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA....
I droped the database to do a test restore...but i cant even login to rman or sqlplus ??? i was able to login to rman before to take a backup....but now i cant.... could not figure out why...any help would be appericiated....
If you have backup and you dropped database then you can create it again.
1) Create directories for background,user,audit dumpdest and control,online log,datafiles.
2) Create OracleServiceComp if that is not exists using ORADIM utility(oradim -new -sid COMP -intpwd <syspass> -pfile <pfile location>)
3) After starting oracle service
set ORACLE_SID=COMP
rman target /
/*if you do not have spfile also then you have to restore it from
full/auto backup or startup database using pfile(create it manually)*/
startup nomount ;
restore controlfile from 'full or autobackup location';
alter database mount;
catalog start with 'backup location';
restore database;
recover database;
alter database open resetlogs;

ORA 12560 OTN Protocol Adapter Error

I installed Oracle 9iAS DB and Developer. When I tried to run Form (Form Builder). I could not establish the connection.
After insert username and password (without hostname), the error said, ORA 12560 OTN Protocol Adapter Error. However, when I put the hostname, the message alert 'the service name could not be solved' or sth. Can anyone help me with this problem? Thank you so much

Hey Nikhil,
I have the same problem, however when I try to run the commands u have asked to run I get errors.
When I try
c:>svrmgrl
'svrmgrl' is not recognized as an internal or external command.
operable program or batch file.
and when I start lsnrctl
LSNRCTL> lsnrctl start
NL-00853: undefined command "lsnrctl". Try "help"
I am using XP , the database is on other drive and the Developer suite is on other drive however, Listener is working fine. This error "ORA-12560: TNS:protocol adapter error" comes only when I try to log into my database from isqlplus. I am using 9i. Any Ideas on what should be done.
Hashem

ORA-03137: TTC protocol internal error : [12333] [4] [195] [21] [] [] []

Similar Messages

Maybe you are looking for