Ora 04052 and 06552 error in a procedure

Hi
i created a procedure
CREATE OR REPLACE PROCEDURE sp_SyncStart
AS
BEGIN
DELETE FROM adPerSyncLog where "date" between (trunc(sysdate-10) and (trunc(sysdate)-1);
INSERT INTO care_admin.coventry_adPerSyncLog
SELECT * FROM yyuniv.adPerSyncLog@UNIVERSE;
end /
i get the following errors
ora -04052:error occured when looking up remote object string@string,,...
ora 06552:pl/sql:compilation unit analysis terminated.
help required in this.............

My problem is closly related to this which i found in one of the forum
This is my procedure
CREATE OR REPLACE PROCEDURE sp_SyncStart
AS
BEGIN
INSERT INTO care_admin.coventry_adPerSyncLog
SELECT * FROM yyuniv.adPerSyncLog@UNIVERSE;
DELETE FROM yyuniv.adPerSyncLog@UNIVERSE;
END;
but I get lovely errors
PL/SQL: ORA-04052: error occurred when looking up remote object
YYUNIV.ADPERSYNCLOG@UNIVERSE
ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this
expression is incomplete or malformed
I tried running the insert statement directly via SQL Plus and it worked correctly. Not sure why it works interactively but not contained in a procedure.

Similar Messages

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Strange ora-1403 and 6508 errors after compiling forms in 10.1.2.0.2

Hi, today we migrated our Application Server to 10.1.2.0.2 and totally unexpected (it was not mentioned in the upgrade guide of 400 pages...) we had to recompile all 9.0.4-executables
So we installed Developer Suite 10.1.2.0.2 and recompiled all libraries, forms and menus. There were no errors reported, so everything should be valid.
Now we can run the forms again - that is, they start without problems - but on some forms (so not all), after doing Run Query, we immediately get ORA-1403, followed by ORA-6508.
Could this perhaps be caused by "something" in the Headstart-libraries that can not be used in 10.1.2?
A quick respons would be perfect, because many users have problems now.
Regards, JW

Hi Josef,
indeed i recompiled them all and the errors are raised in development (running standalone oc4j) and production environment (application server 10.1.2).
Currently i'm migrating the forms to Headstart 65401 and i will update this thread with the results. I guess/hope that the obsolete forms functions/procedures caused these errors.
Thanks, JW

Attempt to down-load Firefox and receive error message - The procedure entry point Port_LoadLibraryfromorgin could not be located in the dynamic library nssutil3.dll

After downloading Firefox attmpted to open and message was received.

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

Why am I getting an ORA-04052 error when I try to compile a Procedure?

Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected]        -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
   AND referenced_type <> 'SYNONYM'
   AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name   varchar2(50);
v_type   varchar2(40);
    BEGIN
       dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
       dbms_output.put_line(' ');
       dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
       dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
        FOR i IN cur_get_dependancy
        LOOP
            v_owner := RPAD(i.owner, 30, ' ');
            v_name := RPAD(i.name, 45, ' ');
            v_type := RPAD(i.type, 30, ' ');
            dbms_output.put_line(v_owner ||v_name|| v_type);
        END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected]        -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
   AND referenced_type <> 'SYNONYM'
   AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?

OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2    FROM [email protected]
3   WHERE lower(referenced_name) = lower('ALL_USERS')
4     AND referenced_type <> 'SYNONYM'
5     AND owner <> 'SYS'
6   order by name;
OWNER                          NAME                           TYPE
PUBLIC                         ALL_USERS                      SYNONYM
XDB                            DBMS_XDBUTIL_INT               PACKAGE BODY
XDB                            DBMS_XDBZ0                     PACKAGE BODY
SYSTEM                         MVIEW_EVALUATIONS              VIEW
SYSTEM                         MVIEW_EXCEPTIONS               VIEW
SYSTEM                         MVIEW_FILTER                   VIEW
SYSTEM                         MVIEW_LOG                      VIEW
SYSTEM                         MVIEW_RECOMMENDATIONS          VIEW
SYSTEM                         MVIEW_WORKLOAD                 VIEW
ORASSO                         WWCTX_API                      PACKAGE BODY
PORTAL                         WWCTX_API                      PACKAGE BODY
ORASSO                         WWEXP_UTL                      PACKAGE BODY
PORTAL                         WWEXP_UTL                      PACKAGE BODY
PORTAL                         WWPOB_API_PAGE                 PACKAGE BODY
PORTAL                         WWPOF                          PACKAGE BODY
ORASSO                         WWPRO_PROVIDER_VALIDATION      PACKAGE BODY
PORTAL                         WWPRO_PROVIDER_VALIDATION      PACKAGE BODY
PORTAL                         WWSBR_EDIT_ATTRIBUTE           PACKAGE BODY
PORTAL                         WWSBR_FOLDER_PORTLET           PACKAGE BODY
PORTAL                         WWSBR_USER_PAGES_PORTLET       PACKAGE BODY
ORASSO                         WWUTL_API_PARSE                PACKAGE BODY
OWNER                          NAME                           TYPE
PORTAL                         WWUTL_API_PARSE                PACKAGE BODY
PORTAL                         WWUTL_EXPORT_IMPORT_LOV        PACKAGE BODY
ORASSO                         WWUTL_LOV                      PACKAGE BODY
PORTAL                         WWUTL_LOV                      PACKAGE BODY
PORTAL                         WWV_CONTEXT                    PACKAGE BODY
PORTAL                         WWV_CONTEXT_UTIL               PACKAGE BODY
PORTAL                         WWV_DDL                        PACKAGE BODY
PORTAL                         WWV_GENERATE_UTL               PACKAGE BODY
PORTAL                         WWV_GLOBAL                     PACKAGE
PORTAL                         WWV_MONITOR_DATABASE           PACKAGE BODY
PORTAL                         WWV_PARSE_AS_SPECIFIC_USER     PACKAGE BODY
PORTAL                         WWV_PARSE_AS_USER              PACKAGE BODY
PORTAL                         WWV_SYS_DML                    PACKAGE BODY
PORTAL                         WWV_SYS_RENDER_HIERARCHY       PACKAGE BODY
PORTAL                         WWV_THINGSAVE                  PACKAGE BODY
PORTAL                         WWV_UTIL                       PACKAGE BODY
PORTAL                         WWV_UTLVALID                   PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again.

Import data - errors: IMP-00017, IMP-00003, ORA-04052, ORA-00604, ORA-12154

When I try to import data from dmp file to my database I found errors whitch repeat all time..
First console show me:
IMP-00017: following statement failed with ORACLE error 4052
then show all procedure in which there are errors. After procedure I've got:
IMP-00003: ORACLE error 4052 encountered
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve service name
IMP-00017: following statement failed with ORACLE error 4043:
"ALTER PROCEDURE "CHECK_TIMESTAMP" COMPILE TIMESTAMP '2006-09-18:14:45:"
"05'"
IMP-00003: ORACLE error 4043 encountered
ORA-04043: object CHECK_TIMESTAMP does not exist
and after that the same errors for another procedures :( What can I do??

ORA-04052: error occurred when looking up remote
object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-12154: TNS:could not resolve service name
and after that the same errors for another procedures
:( What can I do??Fix the tnsnames.ora i.e. name resolution problem (lookup the description for ora-12154).

How to catch PL/SQL: ORA-04052 error?

I need to execute a procedure that select remote objects but the remote db is a RAC DB and I only have access to one of the nodes, the remote RAC have load balancing enabled and the remote DBA can’t create a DB Service for my connection, so, I have to re-run the execution of my procedure until it connects successful to the remote DB through a db link, but I can’t catch the error ORA-12541: TNS:no listener.
Someone knows how to catch the error??
set serveroutput on
declare
function F_DATE return sysdate
is
ld_return date;
begin
begin
select sysdate into ld_return from dual@dbl_bnvalores;
exception
when others then
ld_return := f_date;
end;
return ld_return;
end F_DATE;
begin
dbms_output.put_line('Remote sysdate: '||f_date);
end;
Error at line 2
ORA-06550: line 2, column 26:
PLS-00562: a function must return a type.
ORA-06550: line 7, column 42:
PL/SQL: ORA-04052: error occurred when looking up remote object BNSAFI.DUAL@DBL_BNVALORES
ORA-00604: error occurred at recursive SQL level 1
ORA-12541: TNS:no listener
ORA-06550: line 7, column 7:
PL/SQL: SQL Statement ignored

I could confirm that you would never branch to the exception in case of no listener!
So another possibility that comes to mind is to enclose the remote select in an execute immediate and only execute it if you could establish a connection via UTL_TCP:
Something along those lines:
michaels> DECLARE
   conn               UTL_TCP.connection;
   l_date             DATE;
   no_listner_excep   EXCEPTION;
   PRAGMA EXCEPTION_INIT (no_listner_excep, -29260);
BEGIN
   conn := UTL_TCP.open_connection ('fleet', 1569);
   EXECUTE IMMEDIATE 'select sysdate from dual@fleet_new'
                INTO l_date;
   UTL_TCP.close_connection (conn);
   DBMS_OUTPUT.put_line (l_date);
EXCEPTION
   WHEN no_listner_excep
   THEN
      DBMS_OUTPUT.put_line (SQLERRM (SQLCODE));
END;
ORA-29260: network error: TNS:no listener
PL/SQL procedure successfully completed.

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

ORA-04052: error occurred when looking up remote obj in mapping execution

Hi,
While executing an OWB mapping, I am getting the following error:
============
Starting Execution UII_D_MAP_SPC_INSTALLATION_SIT
Starting Task UII_D_MAP_SPC_INSTALLATION_SIT
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
ORA-02063: preceding 3 lines from BIP2S@BIPDRACONN
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 73
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 1672
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 2353
ORA-06512: at "UII_ODS_OWNER.UII_D_MAP_SPC_INSTALLATION_SIT", line 6838
ORA-06512: at line 1
Completing Task UII_D_MAP_SPC_INSTALLATION_SIT
Completing Execution UII_D_MAP_SPC_INSTALLATION_SIT
============
Actually, here UII_ODS_OWNER itself is the target schema and <<UIIVS.DEVENV1.BT.CO.UK>> is the database in which this schema exists. And the mapping "UII_D_MAP_SPC_INSTALLATION_SIT" is being executed in the same target schema UII_ODS_OWNER.
I am not sure why this above error is coming because such a dblink 'UIIVS.DEVENV1.BT.CO.UK' does not exist in the OWB generated package code. And the 2nd dblink 'BIP2S@BIPDRACONN' does not exist in the code, intead it exists as "BIP2S.DEVENV1.BT.CO.UK@BIPDRACONN" in the package code which is correct (as per OWB configuration & database).
Same error also comes when I try to execute the same mapping from the OWB DEPLOYMENT MANAGER.
Thanks & Regards,
lenin

Good morning Lenin,
Have you checked the implementation of the connectors and are your locations well registered?
Has a similar setup ever worked well?
Can you access the source table using SQL (e.g. with SQL*Plus or TOAD)?
Regards, Patrick

Error 'ORA-01403 no data found', if a procedure called through $Universe

Hello,
we use at our customer the scheduling software $Universe. The problem follows is happend at calling PL/SQL-procedures within SQL*Plus:
Within the calling procedur another subprogram will be called. This program crashed on select of currval with the error 'ORA-01403 no data found'. This error happens only, if the procedure called through $Universe. If the procedure called directly from SQL*Plus or about a unix shell-script, no error happens.
About the command "select saddr,sid,serial# from sys.V_$SESSION where
username ='xxx';" we select the Session_ID's. These are identically before and after call of the procedure!
Do you have an idea, how the problem can be?
Next information about OS, releases, settings of Oracle-Session-Parameters, and the crashing procedure:
SQL*Plus: Release 8.1.6.0.0 - Production on Fri Mar 15 13:25:05 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
OS: HP-UX11
ORACLE-Server NLS-parameters on HP-UX:
NLS_LANGUAGE               AMERICAN
NLS_TERRITORY               AMERICA
NLS_CURRENCY               $
NLS_ISO_CURRENCY          AMERICA
NLS_NUMERIC_CHARACTERS          .,
NLS_CALENDAR               GREGORIAN
NLS_DATE_FORMAT               DD-MON-RR
NLS_DATE_LANGUAGE          AMERICAN
NLS_CHARACTERSET          WE8DEC
NLS_SORT               BINARY
NLS_TIME_FORMAT               HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT          DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT          HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT          DD-MON-RR HH.MI.SSXFF AM TZH:T
NLS_DUAL_CURRENCY          $
NLS_NCHAR_CHARACTERSET          WE8DEC
NLS_COMP               BINARY
Windows-desktop NLS-parameters:
ALTER SESSION set NLS_LANGUAGE = 'GERMAN';
ALTER SESSION set NLS_TERRITORY = 'GERMANY';
ALTER SESSION set NLS_ISO_CURRENCY = 'GERMANY';
ALTER SESSION set NLS_NUMERIC_CHARACTERS = ',.';
ALTER SESSION set NLS_CALENDAR = 'GREGORIAN';
ALTER SESSION set NLS_DATE_FORMAT = 'DD/MM/YY';
ALTER SESSION set NLS_DATE_LANGUAGE = 'GERMAN';
ALTER SESSION set NLS_SORT = 'GERMAN';
ALTER SESSION set NLS_TIME_FORMAT = 'HH24:MI:SSXFF';
ALTER SESSION set NLS_TIMESTAMP_FORMAT = 'DD.MM.RR HH24:MI:SSXFF';
ALTER SESSION set NLS_TIME_TZ_FORMAT = 'HH24:MI:SSXFF TZH:TZM';
ALTER SESSION set NLS_TIMESTAMP_TZ_FORMAT = 'DD.MM.RR HH24:MI:SSXFF
TZH:TZM';
ALTER SESSION set NLS_DUAL_CURRENCY = '?';
ALTER SESSION set NLS_COMP = 'BINARY';
PROCEDURE PROC_NEW_ID (p_value IN NUMBER,
p_field IN VARCHAR2,
p_table IN VARCHAR2,
p_currval OUT NUMBER)
IS
v_stmt VARCHAR2(200);
v_currval NUMBER;
BEGIN
-- Bildung des SQL-Statements.
v_stmt := 'INSERT INTO '||p_table|| '('|| p_field || ') VALUES
('||p_value||')';
-- Ausfuehren des SQL-Statements.
EXECUTE IMMEDIATE v_stmt;
COMMIT;
-- Bildung des SQL-Statements.
v_stmt := 'SELECT SEQ_'|| p_table || '.CURRVAL FROM DUAL';
-- Ausfuehren des SQL-Statements.
EXECUTE IMMEDIATE v_stmt INTO v_currval;
-- Wertrueckgabe
p_currval := NVL(v_currval,0);
EXCEPTION
WHEN OTHERS THEN
pkg_mira_protokoll.proc_write_error_fwd
(pkg_mira_consts.act_error,
SQLCODE,
SQLERRM(SQLCODE),
'PROC_NEW_ID');
p_currval := 0;
RAISE;
END;
Thanks for your request!
Best regards
Esser Office Consulting KG
J|rgen Esser

This forum is for posting feedback about the OTN site.
The best place for your question is probably a Portal forum.
There is a list of Portal forums here:
http://forums.oracle.com/forums/index.jsp?cat=13

ORA-06521: PL/SQL: Error mapping function with 10.1.0 external procedure

We have an external procedure running fine on 8.1.7 on VMS. After compiling and linking succesfully under 10.1.0, I get ORA-06521 PL/SQL: Error mapping function and ORA-06522: ERROR - vms_dlsym for file x, where x in the filename of the linked executable. Another external procedure that does not connect to the 10.1.0 database runs fine. What could be causing this error in Server 10.1.0 on VMS?
Thanks,
Dave

Here is the code to create the function:
CREATE OR REPLACE FUNCTION f1
(h_file_name IN VARCHAR2)
RETURN BINARY_INTEGER
IS EXTERNAL
LIBRARY l1
NAME "f1"
LANGUAGE C
WITH CONTEXT
PARAMETERS
(CONTEST,
h_file_name string);
Here is the beginning of the Pro*C:
int f1(epctx, h_file_name)
OCIExtProcContext *epctx;
char h_file_name[70];
char h_line_txt [251];
int lineno;
FILE *fptr;
/* register the connection context ... */
EXEC SQL REGISTER CONNECT USING :epctx;
The function loads a flat file into the database. It is probably not related but are unable to SQLPLUS/ or SQLLDR/ into the database from an OS autheniticated account (get ORA-12547: TNS:lost contact.) Thanks for taking the time to look at this. There aren't many people trying this on VMS, I'd bet.

ORA-04052: Error occurs when execute the block

I'm trying to run one block and his query definition uses an active public database link. When I ran the script to block I get the following message:
ERROR in line 1:
ORA-04052: error occurred when looking up remote object
SQ_DSV.temp_tipo_contr@SQ_DSV tc
ORA-00604: error occurred at recursive SQL level 1
But when I execute his definition query all is ok, the query works fine.
I mean, I'm using the following sentence to block:
declare
Cursor Tipo_Contr is
Select tc.rec_id, tc.tipo_contr from SQ_DSV.temp_tipo_contr@SQ_DSV tc;
begin
For Reg_Tipo_Contr in Tipo_Contr Loop
Begin
Update recursos Set tpcontr_id = Reg_Tipo_Contr.tipo_contr
where rec_id = Reg_Tipo_Contr.rec_id;
exception when others then
dbms_output.put_line(Reg_Tipo_Contr.rec_id || ' Not find');
end;
end loop;
-- Commit;
end;
I checked for the GLOBAL_NAMES parameter and it is set to FALSE. Please help me, How can I fix this problem ?
I'm using Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production running over Win XP for run block.
Thanks you, Paulo.

ORA-04052 error occurred when looking up remote object stringstringstringstringstring
Cause: An error has occurred when trying to look up a remote object.
Action: Fix the error. Make sure the remote database system has run KGLR.SQL to create necessary views used for querying/looking up objects stored in the database.
Regards
Marcio Paiva

Ora-04052 error

I am using oracle 11g on windows vista and sql server 2008.Can any on e solve this issue?
Warning
VLD-1005: Column precision of AGGREGATOR.OUTGRP1.SALES_QUANTITY is greater than the target column precision.
Warning
VLD-1004: Column length of AGGREGATOR.OUTGRP1.STORE_CITY is longer than the target column length.
ORA-04052: error occurred when looking up remote object dbo.REGIONS@WASEEMPKI@WSM_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-01017: invalid username/password; logon denied
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'waseem'.
ORA-02063: preceding 2 lines from WASEEMPKI@WSM_LOCATION1
STAGE_MAP
Create
Error
ORA-01775: looping chain of synonyms
STAGE_MAP
Create
Error
ORA-01775: looping chain of synonyms
Edited by: 965105 on Oct 12, 2012 10:32 PM

Did you resolve this?
I other folk hitting this where the synonym was pointing to invalid objects....
http://stackoverflow.com/questions/247090/how-to-debug-ora-01775-looping-chain-of-synonyms
Cheers
David

ORA-06502: PL/SQL error with dimensions and roles

Hi everyone,
When executing a mapping that loads a cube we are always getting that ORA-06502: PL/SQL error character string buffer too small
The cube contains a number of dimensions, some of them with roles. We've checked that the error appears when we use two different lookup operators to fill dimension atributtes in the cube and its correspondent role. If we map dimension attributes with lookup operator, and the role attributes with constants, the mapping executes without any error. Moreover, even thought it doesnt make any sense, if we map the role dimension attributes with a lookup operator linked to a different dimension, it works too.
We think that this could be due to attributes names, maybe they are too long, but we have tried to make them shorter and still getting the same error.
Any ideas of what could be happening?
Thank you so much in advance.

The return datatype in a PLSQL function is unconstrained. Which means it does not have a size.
The size is declared on the receiving end.
What size variable are you trying to return your value into?
Here is an example...
SQL>create or replace function my_func
2 return varchar2
3 is
4 begin
5    return USER;
6 end;
7 /
Function created.
SQL>declare
2    my_string varchar2(30);
3 begin
4    my_string := my_func;
5 end;
6 /
PL/SQL procedure successfully completed.
SQL>declare
2    my_string varchar2(3);
3 begin
4    my_string := my_func;
5 end;
6 /
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 4

How to handle the error ORA-04052

We have two Oracle database servers Primary and Secondary, and a DBLINK from Primary to Secondary.
We have a table EmployeeDetails in both the database.
we have written a query to retreive data from both the database using DBLINK without any problem.
When the SECONDARY database was shutdown,
we get exception in the query.
ORA-04052: error occurred when looking up remote object SYSTEM.EmployeeDetails@REMOTEDB
ORA-00604: error occurred at recursive SQL level 1
ORA-12505: TNS:listener could not resolve SID given in connect descriptor.

What kind of query is this? How is the "erroring" statement called?
ORA-04052: error occurred when looking up remote
object SYSTEM.EmployeeDetails@REMOTEDB While designing, do not use the system schema - use a separate schema for your app's objects !

Ora 04052 and 06552 error in a procedure

Similar Messages

Maybe you are looking for