ORA-12500 Tns listner failed to start the dedicated server process.

Hi all,
I am getting below error message when i am trying to connect to database through db console.
OS-Windows sever
Database-10GR1
ORA-12500 Tns listner failed to start the dedicated server process.
Kindly help me out..
Thanks in advance
Edited by: rajaryan on Sep 17, 2009 4:46 AMYou are running short of resources. Check v$resource_limit. You may also use the orastack utility for minimizing the memory utilized by oracle.
http://hrivera99.blogspot.com/2008/01/orastack.html
Regards,
S.K.

Similar Messages

'ORA-12500: TNS: Listener failed to start a dedicated server process'

Hi,
While connecting from one database to another users are getting the below error when they are giving a select statement,its taking around 30 minutes and showing
'ORA-12500: TNS: Listener failed to start a dedicated server process'...
What could be the issue...
Thanks,
Kr.

If database to which they are trying to connect is running, then check listener.log ($ORACLE_HOME/network/log).
Probably there is not enough system resources - check opsystem logs as well (on unix /var/log or /var/adm) on windows look at events.
Look into db alert.log as well.

ERROR:ORA-12500: TNS:listener failed to start a dedicated server process

I'm getting this error when connecting to an 8i database. The setup was like this: I had an Oracle 8i database on this server and i installed Grid Control on this server which also created a listener.
From Metalink, I saw the following note: A version 10 listener is required for an Oracle Database 10g database. Previous versions of the listener are not supported for use with an Oracle Database 10g database. However, it is possible to use a version 10 listener with previous versions of the Oracle database.
So I deleted the 8i listener and set up the 10g listener to service the 8i database as well. However, every time I connect to this 8i database, I see the listener refusing the connection. Anything I can do here?
Thanks.

I probably have posted this earlier,
please configure the listener static.
In other words, ensure that 8i registers with 8i listener and 10g registers with 10g listener.
c:\blah\blah\8i\.\lsnrctl start listener8i
c:\blah\blah\10g\.\lsnrctl start listener10g
Read about how to Configure static listener?

Oracle 10G : ORA-12500: TNS:listener failed to start a dedicated server pro

When connecting to Oracle I am getting this error. I have restarted the database, restarted the listener, but the problem does not go away. I have increased the processes to 400.
Error :
ORA-12500: TNS:listener failed to start a dedicated server process
listener.log :
27-APR-2004 11:15:38 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2265)) * establish * BUILD.OCS.COM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Listener.trc :
[27-APR-2004 11:14:38:382] snttcallback: op = 5, bytes = 170, err = 0
[27-APR-2004 11:14:38:382] ntt2err: soc 324 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
[27-APR-2004 11:14:38:382] nsdo: 160 bytes from NS buffer
[27-APR-2004 11:14:38:382] nsglgrDoRegister: inst loads: ld1:12 mld1:100 ld2:12 mld2:445
[27-APR-2004 11:14:38:382] nsdo: 68 bytes to NS buffer
[27-APR-2004 11:15:38:951] nsopen: opening transport...
[27-APR-2004 11:15:38:951] nttcnp: Validnode Table IN use; err 0x0
[27-APR-2004 11:15:38:951] nttcnp: getting sockname
[27-APR-2004 11:15:38:951] nttcnr: waiting to accept a connection.
[27-APR-2004 11:15:38:951] nttcnr: getting sockname
[27-APR-2004 11:15:38:951] nttcnr: connected on ipaddr 192.168.180.112
[27-APR-2004 11:15:38:951] nttvlser: valid node check on incoming node 192.168.180.112
[27-APR-2004 11:15:38:951] nttvlser: Accepted Entry: 192.168.180.112
[27-APR-2004 11:15:38:951] nttcon: set TCP_NODELAY on 288
[27-APR-2004 11:15:38:951] nsopen: transport is open
[27-APR-2004 11:15:38:951] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[27-APR-2004 11:15:38:951] nsopen: global context check-in (to slot 7) complete
[27-APR-2004 11:15:38:951] nsanswer: deferring connect attempt; at stage 5
[27-APR-2004 11:15:38:951] nscon: doing connect handshake...
[27-APR-2004 11:15:38:951] nscon: got NSPTCN packet
[27-APR-2004 11:15:38:951] nsevdrcvreq: recving connect data
[27-APR-2004 11:15:38:951] nsdo: 248 bytes from NS buffer
[27-APR-2004 11:15:38:951] nsevdansw: exit
[27-APR-2004 11:15:38:951] nsglbgetRSPidx: returning ecode=0
[27-APR-2004 11:15:38:951] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
[27-APR-2004 11:15:38:951] nsbeqaddr: connecting...
[27-APR-2004 11:15:38:951] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
[27-APR-2004 11:15:38:951] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[27-APR-2004 11:15:38:951] nscon: sending NSPTRF packet
[27-APR-2004 11:15:38:951] nstimarmed: no timer allocated
[27-APR-2004 11:15:38:951] nsclose: closing transport
[27-APR-2004 11:15:38:951] nsclose: global context check-out (from slot 7) complete
[27-APR-2004 11:15:38:951] nsgldissolve: Deallocating cxd 0xd89e18.

Listener.ora:
lsncrtl status:
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 27-APR-2004 11:27:56
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.2.0 - Production
Start Date 27-APR-2004 11:27:23
Uptime 0 days 0 hr. 0 min. 33 sec
Trace Level admin
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.1.0\db_1\network\admin\listener.ora
Listener Log File C:\oracle\product\10.1.0\db_1\network\log\listener.log
Listener Trace File C:\oracle\product\10.1.0\db_1\network\trace\listener.trc
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "BUILD" has 1 instance(s).
Instance "BUILD", status UNKNOWN, has 1 handler(s) for this service...
Service "BUILD.OCS.COM" has 1 instance(s).
Instance "build", status READY, has 2 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
sqlnet.log:
Fatal NI connect error 12500, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ma-buildenv1.ocs.open-channels.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 27-APR-2004 11:28:42
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
listener.log:
27-APR-2004 11:28:42 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=BUILD.OCS.COM)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=MA-BUILDENV1)(USER=nkancharla))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.180.112)(PORT=2527)) * establish * BUILD.OCS.COM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
listener.trc with ADMIN on:
[27-APR-2004 11:28:42:011] nsevwait: 1 newly-posted event(s)
[27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NT events set:
     CONNECTION REQUEST
[27-APR-2004 11:28:42:011] nsevfnt: cxd: 0xd3eed0 stage 0: NS events set:
     INCOMING CALL
[27-APR-2004 11:28:42:011] nsevwait: event is 0x1, on 2
[27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:42:011] nsglhe: entry
[27-APR-2004 11:28:42:011] nsmal: 536 bytes at 0xd7c1f0
[27-APR-2004 11:28:42:011] nsmal: 1632 bytes at 0xd7e638
[27-APR-2004 11:28:42:011] nsopen: opening transport...
[27-APR-2004 11:28:42:011] nttcon: entry
[27-APR-2004 11:28:42:011] nttcon: toc = 3
[27-APR-2004 11:28:42:011] nttcnp: entry
[27-APR-2004 11:28:42:011] ntvlin: entry
[27-APR-2004 11:28:42:011] ntvlin: exit
[27-APR-2004 11:28:42:011] nttcnp: Validnode Table IN use; err 0x0
[27-APR-2004 11:28:42:011] nttcnp: getting sockname
[27-APR-2004 11:28:42:011] nttcnp: exit
[27-APR-2004 11:28:42:011] nttcnr: entry
[27-APR-2004 11:28:42:011] nttcnr: waiting to accept a connection.
[27-APR-2004 11:28:42:011] nttcnr: getting sockname
[27-APR-2004 11:28:42:011] nttcnr: connected on ipaddr 192.168.180.112
[27-APR-2004 11:28:42:011] nttvlser: entry
[27-APR-2004 11:28:42:011] nttvlser: valid node check on incoming node 192.168.180.112
[27-APR-2004 11:28:42:011] nttvlser: Accepted Entry: 192.168.180.112
[27-APR-2004 11:28:42:011] nttcnr: exit
[27-APR-2004 11:28:42:011] nttcon: set TCP_NODELAY on 248
[27-APR-2004 11:28:42:011] nttcon: exit
[27-APR-2004 11:28:42:011] nsopen: transport is open
[27-APR-2004 11:28:42:011] nsnainit: answer
[27-APR-2004 11:28:42:011] nsnasvnainfo: NA disabled for this connection
[27-APR-2004 11:28:42:011] nainit: entry
[27-APR-2004 11:28:42:011] nagblini: entry
[27-APR-2004 11:28:42:011] nau_gin: entry
[27-APR-2004 11:28:42:011] nau_gparams: entry
[27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "sqlnet.authentication_required" from parameter file
[27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
[27-APR-2004 11:28:42:011] nau_gparams: Using default value "FALSE"
[27-APR-2004 11:28:42:011] nau_gslf: entry
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "sqlnet.authentication_services" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: Found 0 items
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] nau_gslf: Using default value "all available adapters"
[27-APR-2004 11:28:42:011] nauss_set_state: entry
[27-APR-2004 11:28:42:011] nauss_set_state: exit
[27-APR-2004 11:28:42:011] nau_gslf: exit
[27-APR-2004 11:28:42:011] nau_gparams: exit
[27-APR-2004 11:28:42:011] nau_gin: exit
[27-APR-2004 11:28:42:011] nagblini: exit
[27-APR-2004 11:28:42:011] na_saveprot: entry
[27-APR-2004 11:28:42:011] na_saveprot: exit
[27-APR-2004 11:28:42:011] nacomin: entry
[27-APR-2004 11:28:42:011] nas_init: entry
[27-APR-2004 11:28:42:011] nas_init: exit
[27-APR-2004 11:28:42:011] nau_ini: entry
[27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: entry
[27-APR-2004 11:28:42:011] nauss_set_state: entry
[27-APR-2004 11:28:42:011] nauss_set_state: exit
[27-APR-2004 11:28:42:011] naugcp_get_connect_parameters: exit
[27-APR-2004 11:28:42:011] nau_gettab: entry
[27-APR-2004 11:28:42:011] nau_gettab: exit
[27-APR-2004 11:28:42:011] nau_sini: entry
[27-APR-2004 11:28:42:011] nau_sini: exit
[27-APR-2004 11:28:42:011] nau_ini: exit
[27-APR-2004 11:28:42:011] naeeinit: entry
[27-APR-2004 11:28:42:011] nam_gbp: Reading parameter "SQLNET.FIPS_140" from parameter file
[27-APR-2004 11:28:42:011] nam_gbp: Parameter not found
[27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.ENCRYPTION_SERVER" from parameter file
[27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
[27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.ENCRYPTION_TYPES_SERVER" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
[27-APR-2004 11:28:42:011] naeshow: entry
[27-APR-2004 11:28:42:011] naeshow: exit
[27-APR-2004 11:28:42:011] naeeinit: exit
[27-APR-2004 11:28:42:011] naecinit: entry
[27-APR-2004 11:28:42:011] nam_gnsp: Reading parameter "SQLNET.CRYPTO_CHECKSUM_SERVER" from parameter file
[27-APR-2004 11:28:42:011] nam_gnsp: Parameter not found
[27-APR-2004 11:28:42:011] naequad: Using default value "ACCEPTED"
[27-APR-2004 11:28:42:011] nam_gic: entry
[27-APR-2004 11:28:42:011] nam_gic: Counting # of items in "SQLNET.CRYPTO_CHECKSUM_TYPES_SERVER" parameter
[27-APR-2004 11:28:42:011] nam_gic: Parameter not found
[27-APR-2004 11:28:42:011] nam_gic: exit
[27-APR-2004 11:28:42:011] naesno: Using default value "all available algorithms"
[27-APR-2004 11:28:42:011] naeshow: entry
[27-APR-2004 11:28:42:011] naeshow: exit
[27-APR-2004 11:28:42:011] naecinit: exit
[27-APR-2004 11:28:42:011] nadisc: entry
[27-APR-2004 11:28:42:011] nacomtm: entry
[27-APR-2004 11:28:42:011] nacompd: entry
[27-APR-2004 11:28:42:011] nacompd: exit
[27-APR-2004 11:28:42:011] nacompd: entry
[27-APR-2004 11:28:42:011] nacompd: exit
[27-APR-2004 11:28:42:011] nacomtm: exit
[27-APR-2004 11:28:42:011] nas_dis: entry
[27-APR-2004 11:28:42:011] nas_dis: exit
[27-APR-2004 11:28:42:011] nau_dis: entry
[27-APR-2004 11:28:42:011] nau_dis: exit
[27-APR-2004 11:28:42:011] naeetrm: entry
[27-APR-2004 11:28:42:011] naeetrm: exit
[27-APR-2004 11:28:42:011] naectrm: entry
[27-APR-2004 11:28:42:011] naectrm: exit
[27-APR-2004 11:28:42:011] nagbltrm: entry
[27-APR-2004 11:28:42:011] nau_gtm: entry
[27-APR-2004 11:28:42:011] nau_gtm: exit
[27-APR-2004 11:28:42:011] nagbltrm: exit
[27-APR-2004 11:28:42:011] nadisc: exit
[27-APR-2004 11:28:42:011] nainit: exit
[27-APR-2004 11:28:42:011] nsnainit: NS Connection version: 313
[27-APR-2004 11:28:42:011] nsnainit: inf->nsinfflg[0]: 0xd inf->nsinfflg[1]: 0xd
[27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
[27-APR-2004 11:28:42:011] nsnainit: "or" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
"and" info flags: 0xd     Translations follow:
     native service(s) is (are) wanted
     NA disabled remotely for this connection
     NA services unavailable on both processes - negotiation not needed
[27-APR-2004 11:28:42:011] nsopen: global context check-in (to slot 7) complete
[27-APR-2004 11:28:42:011] nsopen: lcl[0]=0x34ffefff, lcl[1]=0x12003, gbl[0]=0x7abf, gbl[1]=0x2001, tdu=32767, sdu=8192
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x2
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=7, flg=0x4000, mvd=0
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsanswer: deferring connect attempt; at stage 5
[27-APR-2004 11:28:42:011] nsevreg: begin registration process for 7
[27-APR-2004 11:28:42:011] nsevreg: sgt=0, evn=4, evt[2]=0x0
[27-APR-2004 11:28:42:011] nsevreg: begin notification process for 7
[27-APR-2004 11:28:42:011] nsrah: setting transport read mode (2)
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Clearing non-blocking mode
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Setting connection into async mode
[27-APR-2004 11:28:42:011] nsevreg: rdm=2, sgt=0, evt[0]=0x20, [1]=0x20, [2]=0x0, nrg=0
[27-APR-2004 11:28:42:011] nsevreg: registering for 0x20
[27-APR-2004 11:28:42:011] nttmrd: entry
[27-APR-2004 11:28:42:011] nttrd: entry
[27-APR-2004 11:28:42:011] snttcallback: entry
[27-APR-2004 11:28:42:011] snttcallback: exit
[27-APR-2004 11:28:42:011] nttrd: socket 248 had bytes read=316
[27-APR-2004 11:28:42:011] nttrd: exit
[27-APR-2004 11:28:42:011] nsglhe: exit
[27-APR-2004 11:28:42:011] nsevwait: 7 registered connection(s)
[27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 7)...
[27-APR-2004 11:28:42:011] nsevwait: 0 newly-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: 1 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevdansw: at STAGE 5
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=2040, what=8, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=14, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=10, gtc=10, ptn=10, ptc=8155
[27-APR-2004 11:28:42:011] nscon: doing connect handshake...
[27-APR-2004 11:28:42:011] nscon: recving a packet
[27-APR-2004 11:28:42:011] nsprecv: 316 bytes from leftover
[27-APR-2004 11:28:42:011] nsprecv: tlen=316, plen=58, type=1
[27-APR-2004 11:28:42:011] nsprecv: 258 bytes to leftover
[27-APR-2004 11:28:42:011] nscon: got NSPTCN packet
[27-APR-2004 11:28:42:011] nsconneg: vsn=313, lov=300, opt=0x0, sdu=2048, tdu=32767, ntc=0x860e
[27-APR-2004 11:28:42:011] nsconneg: vsn=313, gbl=0x1, sdu=2048, tdu=32767
[27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nscon: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsevdrcvreq: recving connect data
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=68, bl=248, what=1, uflgs=0x4001, cflgs=0x0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=58, gtc=58, ptn=10, ptc=2011
[27-APR-2004 11:28:42:011] nsrdr: recving a packet
[27-APR-2004 11:28:42:011] nsprecv: 258 bytes from leftover
[27-APR-2004 11:28:42:011] nsprecv: tlen=258, plen=258, type=6
[27-APR-2004 11:28:42:011] nsrdr: got NSPTDA packet
[27-APR-2004 11:28:42:011] nsrdr: NSPTDA flags: 0x0
[27-APR-2004 11:28:42:011] nsdo: what=1, bl=248
[27-APR-2004 11:28:42:011] nsdo: 248 bytes from NS buffer
[27-APR-2004 11:28:42:011] nsevdrcvreq: got 248 bytes connect data
[27-APR-2004 11:28:42:011] nsevdansw: exit
[27-APR-2004 11:28:42:011] nsevwait: event is 0x20, on 7
[27-APR-2004 11:28:42:011] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:42:011] nsglhe: entry
[27-APR-2004 11:28:42:011] nsglfc: Assume establishing a connection...
[27-APR-2004 11:28:42:011] nsglfc: command = establish
[27-APR-2004 11:28:42:011] nsglauthorized: entry
[27-APR-2004 11:28:42:011] nsglecmd: entry
[27-APR-2004 11:28:42:011] nttaddr2bnd: entry
[27-APR-2004 11:28:42:011] nttaddr2bnd: exit
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: entry
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: returning ecode=0
[27-APR-2004 11:28:42:011] nsglbgetRSPidx: exit
[27-APR-2004 11:28:42:011] nsglb: entry
[27-APR-2004 11:28:42:011] nsglb: exit
[27-APR-2004 11:28:42:011] nsc2addr: (ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclebuild)(ARGS='(LOCAL=NO)'))
[27-APR-2004 11:28:42:011] nlpcaini: entry
[27-APR-2004 11:28:42:011] nlpcaini: prg = oracle
[27-APR-2004 11:28:42:011] nlpcaini: arg[0] = oraclebuild
[27-APR-2004 11:28:42:011] nlpcaini: arg[1] = (LOCAL=NO)
[27-APR-2004 11:28:42:011] nlpcaini: exit
[27-APR-2004 11:28:42:011] nsbeqaddr: connecting...
[27-APR-2004 11:28:42:011] ntpcon: entry
[27-APR-2004 11:28:42:011] ntpcon: toc = 1
[27-APR-2004 11:28:42:011] sntpcall: entry
[27-APR-2004 11:28:42:011] snlpcss: entry
[27-APR-2004 11:28:42:011] snlpcss: Unable to spawn Oracle oracle (LOCAL=NO) build, error 258.
[27-APR-2004 11:28:42:011] sntpcall: exit
[27-APR-2004 11:28:42:011] ntpcon: exit
[27-APR-2004 11:28:42:011] nserror: nsres: id=7, op=72, ns=12560, ns2=0; nt[0]=530, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
[27-APR-2004 11:28:42:011] nsglrespond: entry
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=67, bl=161, what=10, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4004, mvd=0
[27-APR-2004 11:28:42:011] nsdo: gtn=258, gtc=258, ptn=10, ptc=2011
[27-APR-2004 11:28:42:011] nscon: sending NSPTRF packet
[27-APR-2004 11:28:42:011] nspsend: plen=173, type=4
[27-APR-2004 11:28:42:011] nttmwr: entry
[27-APR-2004 11:28:42:011] nttwr: entry
[27-APR-2004 11:28:42:011] snttcallback: entry
[27-APR-2004 11:28:42:011] snttcallback: exit
[27-APR-2004 11:28:42:011] nttwr: socket 248 had bytes written=173
[27-APR-2004 11:28:42:011] nttwr: exit
[27-APR-2004 11:28:42:011] nspsend: 173 bytes to transport
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nstimarmed: no timer allocated
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nsdo: cid=7, opcode=66, bl=0, what=0, uflgs=0x0, cflgs=0x2
[27-APR-2004 11:28:42:011] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:42:011] nsdo: nsctx: state=2, flg=0x4000, mvd=0
[27-APR-2004 11:28:42:011] nsevunreg: cid=7, sgt=0, rdm=2
[27-APR-2004 11:28:42:011] nsrah: re-setting transport read mode
[27-APR-2004 11:28:42:011] nttctl: entry
[27-APR-2004 11:28:42:011] nttctl: Clearing async mode
[27-APR-2004 11:28:42:011] nsevunreg: 6 registered connection(s)
[27-APR-2004 11:28:42:011] nsdo: nsctxrnk=0
[27-APR-2004 11:28:42:011] nsclose: closing transport
[27-APR-2004 11:28:42:011] nttdisc: entry
[27-APR-2004 11:28:42:011] nttdisc: Closed socket 248
[27-APR-2004 11:28:42:011] nttdisc: exit
[27-APR-2004 11:28:42:011] nsclose: global context check-out (from slot 7) complete
[27-APR-2004 11:28:42:011] nsmfr: 1632 bytes at 0xd7e638
[27-APR-2004 11:28:42:011] nsmfr: 536 bytes at 0xd7c1f0
[27-APR-2004 11:28:42:011] nsgldissolve: entry
[27-APR-2004 11:28:42:011] nsgldissolve: Deallocating cxd 0xd7c608.
[27-APR-2004 11:28:42:011] nsgldissolve: exit
[27-APR-2004 11:28:42:011] nsglrespond: exit
[27-APR-2004 11:28:42:011] nsglecmd: exit
[27-APR-2004 11:28:42:011] nsglhe: exit
[27-APR-2004 11:28:42:011] nsevwait: 6 registered connection(s)
[27-APR-2004 11:28:42:011] nsevwait: 0 pre-posted event(s)
[27-APR-2004 11:28:42:011] nsevwait: waiting for transport event (0 thru 6)...
[27-APR-2004 11:28:45:136] snttcallback: entry
[27-APR-2004 11:28:45:136] snttcallback: op = 5, bytes = 170, err = 0
[27-APR-2004 11:28:45:136] snttcallback: exit
[27-APR-2004 11:28:45:136] nsevwait: 0 newly-posted event(s)
[27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NT events set:
     READ
[27-APR-2004 11:28:45:136] nsevfnt: cxd: 0xd597c8 stage 0: NS events set:
     INCOMING SEND
[27-APR-2004 11:28:45:136] nsevwait: event is 0x2, on 4
[27-APR-2004 11:28:45:136] nsevwait: 1 posted event(s)
[27-APR-2004 11:28:45:136] nsglhe: entry
[27-APR-2004 11:28:45:136] nsglrohe: entry
[27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=68, bl=8196, what=0, uflgs=0x0, cflgs=0x3
[27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[27-APR-2004 11:28:45:136] nsdo: gtn=258, gtc=258, ptn=10, ptc=8155
[27-APR-2004 11:28:45:136] nsrdr: recving a packet
[27-APR-2004 11:28:45:136] nsprecv: 170 bytes from leftover
[27-APR-2004 11:28:45:136] nsprecv: tlen=170, plen=170, type=6
[27-APR-2004 11:28:45:136] nttmrd: entry
[27-APR-2004 11:28:45:136] nttrd: entry
[27-APR-2004 11:28:45:136] ntt2err: entry
[27-APR-2004 11:28:45:136] ntt2err: soc 296 error - operation=5, ntresnt[0]=524, ntresnt[1]=997, ntresnt[2]=0
[27-APR-2004 11:28:45:136] ntt2err: exit
[27-APR-2004 11:28:45:136] nttrd: exit
[27-APR-2004 11:28:45:136] nsrdr: got NSPTDA packet
[27-APR-2004 11:28:45:136] nsrdr: NSPTDA flags: 0x0
[27-APR-2004 11:28:45:136] nsdo: what=1, bl=8196
[27-APR-2004 11:28:45:136] nsdo: 160 bytes from NS buffer
[27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
[27-APR-2004 11:28:45:136] nsglgrDoRegister: inst loads: ld1:51 mld1:100 ld2:12 mld2:445
[27-APR-2004 11:28:45:136] nsglgrDoRegister: exit
[27-APR-2004 11:28:45:136] nsdo: cid=4, opcode=67, bl=68, what=1, uflgs=0x2, cflgs=0x3
[27-APR-2004 11:28:45:136] nsdo: rank=64, nsctxrnk=0
[27-APR-2004 11:28:45:136] nsdo: nsctx: state=8, flg=0x400c, mvd=0
[27-APR-2004 11:28:45:136] nsdo: gtn=170, gtc=170, ptn=10, ptc=8155
[27-APR-2004 11:28:45:136] nsdo: 68 bytes to NS buffer
[27-APR-2004 11:28:45:136] nsdofls: DATA flags: 0x0
[27-APR-2004 11:28:45:136] nsdofls: sending NSPTDA packet
[27-APR-2004 11:28:45:136] nspsend: plen=78, type=6
[27-APR-2004 11:28:45:136] nttmwr: entry
[27-APR-2004 11:28:45:136] nttwr: entry
[27-APR-2004 11:28:45:136] snttcallback: entry
[27-APR-2004 11:28:45:136] snttcallback: exit
[27-APR-2004 11:28:45:136] nttwr: socket 296 had bytes written=78
[27-APR-2004 11:28:45:136] nttwr: exit
[27-APR-2004 11:28:45:136] nspsend: 78 bytes to transport
[27-APR-2004 11:28:45:136] nsdoacts: flushing transport
[27-APR-2004 11:28:45:136] nttctl: entry
[27-APR-2004 11:28:45:136] nsdo: nsctxrnk=0
[27-APR-2004 11:28:45:136] nsglroHandleError: exit
[27-APR-2004 11:28:45:136] nsglrohe: exit
[27-APR-2004 11:28:45:136] nsglhe: exit
[27-APR-2004 11:28:45:136] nsevwait: 6 registered connection(s)
[27-APR-2004 11:28:45:136] nsevwait: 0 pre-posted event(s)
[27-APR-2004 11:28:45:136] nsevwait: waiting for transport event (0 thru 6)...

TNS-12500: TNS:listener failed to start a dedicated server process

Hello all,
I have recently applied a patch on apps tier, after which the concurrent manager is not up & running,
while viewing the internal log
im getting the below error
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
Starting AVAILMGR Concurrent Manager               : 25-NOV-2013 13:02:02
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager AVAILMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to : 25-NOV-2013 13:02:02
                     Process monitor session ended : 25-NOV-2013 13:02:02
========================================================================
Starting test_1125@test Internal Concurrent Manager -- shell process ID 25362
          logfile=/d01/apps/testcomn/admin/log/test_test/test_1125.mgr
          PRINTER=noprint
           mailto=appltest
          restart=N
             diag=N
            sleep=60 (default)
             pmon=20 (default)
           quesiz=1 (default)
Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 25-NOV-2013 13:03:01 -
Shutting down Internal Concurrent Manager : 25-NOV-2013 13:03:01
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The test_1125@test internal concurrent manager has terminated with status 1 - giving up.
WARNING: RunAsUser for MSP ignored, check group ids (egid=501, want=51)
can not chdir(/var/spool/clientmqueue/): Permission denied
Program mode requires special privileges, e.g., root or TrustedUser.
Also in apps tier $TNS_ADMIN
the log says
25-NOV-2013 14:57:51 * ping * 0
25-NOV-2013 14:57:51 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=5147)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
   TNS-00517: Lost contact
    Linux Error: 32: Broken pipe

HI thanks for your reply,
I tried the above guide but dint helped me,
I tried modifiying Concurrent:GSM Enabled to N & concurrent manager started but all requests were in pending state not running so i reverted back to Concurrent:GSM Enabled Y
I ran autoconfig & this is the lastes error I am getting in internal manager log.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:18
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:18
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:19
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:19
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:20
Could not start Service Manager FNDSM_test_test. The TNS alias could not be located, the listener process on test could not be contacted, or the listener failed to spawn the Service Manager process.
Routine AFPEIM encountered an error while starting concurrent manager FCHMGR with library /d01/apps/testappl/fnd/11.5.0/bin/FNDLIBR.
Check that your system has enough resources to start a concurrent manager process. Contact your system administrator to o : 25-NOV-2013 15:51:20
Starting FCHMGR Concurrent Manager                 : 25-NOV-2013 15:51:20
The below is the log from $TNS_ADMIN log directory apps_test.ora
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.2.30.82)(PORT=13510)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
   TNS-00517: Lost contact
    Linux Error: 32: Broken pipe
25-NOV-2013 16:06:01 * ping * 0
25-NOV-2013 16:06:01 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13512)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
   TNS-00517: Lost contact
    Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.12)(PORT=13514)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
   TNS-00517: Lost contact
    Linux Error: 32: Broken pipe
25-NOV-2013 16:06:02 * ping * 0
25-NOV-2013 16:06:02 * (CONNECT_DATA=(SID=FNDSM)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.30)(PORT=13516)) * establish * FNDSM * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
   TNS-00517: Lost contact
    Linux Error: 32: Broken pipe

DB 9i - TNS-12500: TNS:listener failed to start a dedicated server process

hi all,
I have a problem with the following configuration oracle 9.2.0.1 (32bits) on Win server 2003 - enterprise x64 edition - 10GM of RAM.
I installed DB without problem, run server, started listener - seems all is fine. But when trying a remote connection, "listener failed to start a dedicated server process"
log listener -------
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=NpressOracle9.replynet.prv)(PORT=2100))(Presentation=FTP)(Session=RAW))
04-MAR-2010 05:31:04 * service_register * PRESS * 0
04-MAR-2010 05:31:08 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=Administrator))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=153092352)) * status * 0
04-MAR-2010 05:31:36 * ping * 0
04-MAR-2010 05:31:39 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=PRESS)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_1\bin\sqlplus.exe)(HOST=MMARFELLA-NB)(USER=mmarfella))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.21.103.28)(PORT=2838)) * establish * PRESS * 12500
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I ask You, because I am not too familiar with Windows environment and very likely I forget/miss something obvious (in this env).
Thanks in advance
Marfy

I solved installing upgrade to 9.2.0.8.
Now It's all OK.
Regards
Marfy

ORA-12500 TNS:listener failed to start a dedicated server pr

hi anybody
what's mean ora-12500??
I could invoked listener(lsnrctl80) success,but
I could not connect to database ,respond error message
ORA-12500!!!!
If you have any solution ,please tell me thanks
ps :database version :Personal oralce 8.0.3
null

Intermittent TNS-12500 Errors on Microsoft Windows NT
1. Increase the amount of memory available to the system
either by removing unnecessary processes or increasing
the amount of physical memory.
2. Increasing the amount of swap space will also
temporarily help relieve the symptoms.
3. Disable OTRACE. OTRACE is a tracing feature that can
cause many problems. OTRACE is enabled by default.
To disable OTRACE:
a. Stop the Oracle database.
b. Go to the orant/otrace/admin directory.
c. Delete all files with a .dat extension.
d. Restart the Oracle database.
4. The TNS-12500 can be a result of the 'processes'
parameter in the init<sid>.ora file being too

Failed To Start A Dedicated Server Process

Hi
Oracle 9.2
Windows Advanced OS
6G Ram
We switched our server from Shared Server to Dedicated. All was going well, but suddenly no one could log in. Currently logged in users were okay.
Alert Log showed several of the following errors:
skgpspawn failed:category = 27143, depinfo = 9261, op = spdcr, loc = skgpspawn
No errors in the listener.log
Attempted login with sqlplus reported ORA-12500: TNS:listener failed to start a dedicated server process
At the time less than 2G of the 6G was being utilized.
Also, during the time of this event, the event log showed several of the following:
Event Type:     Error
Event Source:     Oracle.ACP
Event Category:     None
Event ID:     31
Date:          5/16/2008
Time:          9:48:59 AM
User:          N/A
Computer:     ACP
Description:
Unable to begin another thread.
Any help would be appreciated.
kd

Hi Don
Thanks for the info. I now have the 3GB switch set. I have been leery of setting the indirect buffers due to some posts I have read like these:
ORA-00385: cannot enable Very Large Memory with new buffer cache parameters
Cause: User specified one or more of { db_cache_size , db_recycle_cache_size, db_keep_cache_size, db_nk_cache_size (where n is one of 2,4,8,16,32) } AND use_indirect_data_buffers is set to TRUE. This is illegal.
Action: Very Large Memory can only be enabled with the old (pre-Oracle_8.2) parameters.
ORA-07305: ksmcsg: illegal database buffer size.
Cause: The database buffer size must be a multiple of the extended cache mapping size for indirect data buffers to be used.
Action: Verify that the db_block_size parameter is correct in INIT.ORA, or disable the use_indirect_data_buffers parameter.
I'm assuming these are 10G and above errors, but I just don't know.
Our db cache is already at a fairly large size.(see non standard configs below).
Also, is this an either/or thing. In other words, /3GT OR /PAE and indirect buffers, but not both?
Thanks again.
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 1350
sessions = 1490
resource_limit = FALSE
license_max_sessions = 0
shared_pool_size = 268435456
shared_pool_reserved_size= 26214400
large_pool_size = 369098752
pre_page_sga = TRUE
enqueue_resources = 124
dbwr_io_slaves = 2
control_files = E:\orant\admin\OR8i\control1\Contrl1.ctl, E:\orant\admin\OR8i\control1\Contrl3.ctl, E:\orant\admin\OR8i\control2\Contrl2.ctl, E:\orant\admin\OR8i\control2\Contrl4.ctl
db_block_size = 8192
db_keep_cache_size = 16777216
db_cache_size = 503316480
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = E:\orant\admin\OR8i\arch
log_archive_format = ARC%S.%T
log_buffer = 65536
log_checkpoint_interval = 0
log_checkpoint_timeout = 1800
db_files = 254
db_file_multiblock_read_count= 8
dml_locks = 2000
transactions_per_rollback_segment= 3
max_rollback_segments = 700
rollback_segments = roll_1, roll_2, roll_3, roll_4, roll_5, roll_6, roll_7, roll_8, roll_9,
remote_login_passwordfile= EXCLUSIVE
license_max_users = 0
global_names = TRUE
shared_servers = 0
max_shared_servers = 0
session_cached_cursors = 25
utl_file_dir = *
job_queue_processes = 2
background_dump_dest = E:\orant\admin\OR8i\bdump
user_dump_dest = E:\orant\admin\OR8i\udump
max_dump_file_size = 50240
sort_area_size = 1048576
sort_area_retained_size = 65536
db_name = EMR
open_cursors = 450
optimizer_mode = CHOOSE

ORA-12500 TNSLISTENER failed to start a dedicated server process

Environment W2000 Pro SP4 latest fixes
I just installed database 10g (10.1.0) in order to have a 10g (10.1) database (ORCL1) as required by Oracle Warehouse builder and other business intelligrence products like disoverer (from discoverer suite) and Portal 10g (9.0.4)
during installation of 10g database I got following messages
==>Oracle Cluster Registry failed to initialize (in french) and went on
==>error when starting OracleCsservice
i retried and went on.
Install finishes correctly
I can access the new database (type warehouse) with sqlplus in a dos window
However I can't reach it through SQL*Plus of oracle 10g database and get ORA-12500 TNSLISTENER failed to start a dedicated server process message
OracleCSService starting
OracleDBConsoleORCL1 started
OracleINFRASControl started
OracleINFRAprocessManager started
OracleINFRATNSListener started
OracleOraDb10g_home1iSQL*Plus Started
OraclePORTALBIASontrol Started
OraclePORTALBIProcessManager Started
OracleServiceASDB Started
OracleServiceORCL1 Started
...... other databases.....
I only have one LISTENER service (the one that was created for INFRAstructure instance) is it OK ?
All other databases instances I am using where created from INFRA DBCA. and all defined with a dedicated server.
I tried to define it through DBCA of Oracle database
left dedicated server and finish
won't work DBCA refuses
I also tried to Stop/start OracleServiceOrcl1 but it won't stop
database ORCL1 is unreachable from other instances:
from Oracle WareHouse Builder's Enterprise Manager console I get the same ORA-12500 message
same with Oracle Net Configuration Assistant of
Oracle Developer Suite Net assistant
What's wrong,
is one listener enough? is there a bug in the product?..
I read quite a few enties but didnt get the answer to my problem

Hello Werner,
What means error 1058?
i posted an entry in application server
Listener.ora and tsnames .ora where updated on INFRAstructure instance to be nearly identical to 10g DB instance (diference is one db definition)
However starting infrastructure and portal instances has become erratic and error prone:u
It takes about 20 minutes to start these two instances by hand has before i had only to start them and everything went smoothly (but took also a long time).
Now i get the following messages and have to use following opmnctl commands to have the whole thing running as follows:
==> start INFRASTRUCTURE
lancement de tnslsnr: veuillez patientez...
failed to start service, error 1058 ==> new message
TNS-12536: l'opÃ©ration provoquerait le blocage ==>new
TNS-12560 erreur d'adaptateur de protocole ==> not new and didn(t care
TNS-00506 l'opÃ©ration provoquerait un blocage ==> new
32-bits Windows Error: 997: Unknown error ==>not new and didn't care
I also get from SMTP the following mail:
Nom=LISTENER_ternes-1-81-57-68-1.fbx.proxad.net
Type=Listener
HÃ´te=ternes-1-81-57-68-1.fbx.proxad.net
Mesure=Status
Horodatage=2 nov. 2004 23 h 34 CET
GravitÃ©=Critique
Message=The listener is down: TNS-12541: TNS:no listener .
Nom de la rÃ¨gle=Listener Availability
PropriÃ©taire de la rÃ¨gle=SYSMAN
1-opmnctl status
opmnctl status
IAS-component process-type pid status
OID OID N/A Down
OC4J OC4J_SECURITY N/A Down
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon N/A Down
LogLoader logloaderd N/A Down
here its very erratic sometimes OID is in STOP status
2-opmnctl startall
opmnctl status
opmnctl status
IAS-component process-type pid status
OID OID 3504 Alive
OC4J OC4J_SECURITY 3416 Alive
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon N/A Down
LogLoader logloaderd N/A Down
3_opmnctl startproc ias-component=dcm-daemon
opmnctl status
IAS-component process-type pid status
OID OID 3504 Alive
OC4J OC4J_SECURITY 3416 Alive
HTTP_Server HTPP_Server 1588 Alive
dsm-daemon dcm-daemon 5524 Alive
LogLoader logloaderd N/A Down
At that point i can start Portal instance
Processes in Instance: PORTALBI.ternes-1-81-57-68-1.fbx.proxad.net
----------------------------------------------+---------
ias-component | process-type | pid | status
----------------------------------------------+---------
wireless | OC4J_Wireless | 5292 | Alive
wireless | messaging_server | 3456 | Alive
wireless | performance_server | 1364 | Alive
Discoverer | PreferenceServer | 2080 | Alive
Discoverer | OAD | 2124 | Alive
Discoverer | OSAgent | 1688 | Alive
OC4J | OC4J_WSRP | 820 | Alive
OC4J | OC4J_Portal | 4264 | Alive
OC4J | OC4J_BI_Forms | 5020 | Alive
OC4J | home | 4948 | Alive
WebCache | WebCacheAdmin | 1976 | Alive
WebCache | WebCache | 3500 | Alive
HTTP_Server | HTTP_Server | 1912 | Alive
dcm-daemon | dcm-daemon | 5048 | Alive
LogLoader | logloaderd | N/A | Down

I fail to start the sap server with error:Operating system call recv failed

I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call           recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    674
intno      20020600
pid        3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
     shared lib "dw_xml.dll" version 674 successfully loaded
     shared lib "dw_xtc.dll" version 674 successfully loaded
     shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm)          12784     (752)
DpShMCreate: sizeof(tm_adm)          1690816     (8412)
DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)     192000     (384)
DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

Listener refused the connection with the following error: ORA-12500, TNS:li

I got this error when I use EM, or sqlplus:
Listener refused the connection with the following error: ORA-12500, TNS:listener failed to start a dedicated server process
when I do
$lsnrctl status:
here is the result
Service "abc.def.com" has 3 instance(s).
Instance "dbtest", status UNKNOWN, has 1 handler(s) for this service...
Instance "dbtest", status BLOCKED, has 1 handler(s) for this service...
Instance "dbtest", status READY, has 1 handler(s) for this service...
please help. Thanks.

Ora12500 means your OS has run out of resources, so you cannot start a process on the Server Side. Post the complete error stack, the last lines show further information to troubleshoot this error.

ORA-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA

Hi
i installed a fresh oracle linux and installes 11.2.0 database server. the server works fine but i have a proplem to connect to the database from a windows 2008 r2
client. For the client connection i installed the oracle instantclient on the windows system. Now i want to configure the system dsn to connect to the oracle
server like this
data source description: vSphere 64
description: ----
TNS Service Name: VCDB
user id: system
then i go to TEST connection
Service Name: VCDB
user name: system
Password: mypassword
so i copied the tnsnames.ora from the server to the client
then i get
ora-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA
here´s my tnsnames.ora from the client
VCDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.31.98.173)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vcdb.vmware)
i tested serveral config´s but nothing works. I can ping the server and also i cn telnet the server on port 1521. The listener on the server works fine
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-SEP-2010 20:48:52
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vc-db1.mydomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-SEP-2010 20:47:45
Uptime 0 days 0 hr. 1 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/vc-db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vc-db1mydomain)(PORT=1521)))
Services Summary...
Service "vcdb.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
Service "vcdbXDB.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
The command completed successfully
but it´s not possible to create a connection to the server. My enviroment variables are this
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_HOSTNAME=vc-db1.mydomain
ORACLE_SID=vcdb
ORACLE_TERM=xterm
so i think on the server site everything is correct. How could i establish a connection from the windows client
to the linux database server. Or is ODBC the wrong method for this?
Kind regards
ACID25

Hi,
Check the listener log and see if the connection information is logged (in this case with error)
If logged, then we are reaching the correct listener.
Then check tnsping VCDB works fine along with sqlplus connection through listener using VCDB as connect string.
If above both works, then issue can be isolated to ODBC configuration or setup issue.
In case even if the tnsping / sqlplus is failing to connect with VCDB, then worth taking a client sqlent trace at level 16 and listener trace at level 16 to analyse the issue further.
Thanks,
Sathya

ORA-12203 :TNS :Unable to connect to the destination.

Hi, All
I installed Oracle 8i and oracle form 6i.
The installation was successful.
It is installed in separate drive.
I can't connect to the forms
the error is
ORA-12203 :TNS :Unable to connect to the destination
please help me..

1) Verify that you have entered the net service name you wish to reach correctly.
2) Verify that the net service name ADDRESS parameters in the connect
descriptor of your TNSNAMES.ORA file are correct.
3) Verify that your TNSNAMES.ORA file is stored in the correct directory.
4) Verify that the listener on the remote node has started and is running. If not,
start the listener by using the Listener Control Utility.
5) If you are connecting from a login box, verify that you are not placing an "@"
symbol before your connect net service name.
NOTE:21337.1

Again: ORA-12504: TNS:listener was not given the SERVICE_NAME...

Hi Guys,
I got this already discussed error and I am sorry, to start a new topic, but I just have no idea what to do else.
I have oracle11g - 32 bit running on my Windows 7 64 bit machine.
The database-server is running fine according to the Database-Control Webinterface.
Connecting with SQLPlus also works
Now my application tries to connect to
Server: localhost
Database: orcl
User: System
PW: myPw
I get: ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
I was reading many threads here and so I tried to configure the standard-listener using the netmanager with an additional SID named "orcl" which results in this listener.ora:
Line: -----
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\Andinger\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\Andinger\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle8)
(SID_NAME = ORCL)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Andband)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\Andinger
Line: -----
This is my tnsnames.ora
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Andband)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Line: -----
What else could I check? What else could be the reason, that it doesn't work.
I appreciate any help, suggestins, hints... :)
Thanks
Andy
Edited by: 943829 on 01.07.2012 04:56
Edited by: 943829 on 01.07.2012 04:57

Thanks for your fast reply!
Attached all the stuff you asked for:
First the result of tnsping:
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2
012 19:19:33
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Parameterdateien benutzt:
E:\app\Andinger\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Adapter EZCONNECT zur Aufl÷sung des Alias benutzt
Verbindungsversuch mit (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROT
OCOL=TCP)(HOST=fe80::341a:eb0:3f57:ff6d%13)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(H
OST=192.168.0.146)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=2001:0:5ef5:79fb:341a
:eb0:3f57:ff6d)(PORT=1521)))
OK (20 ms)
This is the content of sqlnet.ora
# sqlnet.ora Network Configuration File: E:\app\Andinger\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
The status of the Listener:
C:\Users\Andinger>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2012 19:23
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Andband)(PORT=1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Startdatum 01-JUL-2012 13:07:18
Uptime 0 Tage 6 Std. 16 Min. 7 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener E:\app\Andinger\product\11.2.0\dbhome_1\network\admi
n\listener.ora
Log-Datei des Listener e:\app\andinger\diag\tnslsnr\Andband\listener\alert\lo
g.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Andband)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "Oracle8" hat 1 Instanzen.
Instanz "ORCL", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "orcl" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Dienst "orclXDB" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Der Befehl wurde erfolgreich ausgef³hrt.
And the Listener Service information:
C:\Users\Andinger>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2012 19:24
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Andband)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:0 abgewiesen:0
LOCAL SERVER
Dienst "Oracle8" hat 1 Instanzen.
Instanz "ORCL", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:12 abgewiesen:0
LOCAL SERVER
Dienst "orcl" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" festgelegt:371 abgelehnt:0 Status:ready
LOCAL SERVER
Dienst "orclXDB" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"D000" eingerichtet:0 abgewiesen:0 aktuell:0 max:1022 Status:ready
DISPATCHER <machine: ANDBAND, pid: 3980>
(ADDRESS=(PROTOCOL=tcp)(HOST=Andband)(PORT=49189))
Der Befehl wurde erfolgreich ausgef³hrt.
I hope that you understand it. I installed a german version. If it is a problem, I can install the english version.

Unable to import Thesaurus in SharePoint 2013 - Failed to start the flow

I am having issue with importing Thesaurus into SharePoint 2013. I have tried with seed file on local and remote server without success. On ULS stack, it lists "Cannot start flow. The admin service is unavailable". But if
I retrieve status of search topology, it lists admin components (running on two app server) are active. Any idea how this could be resolved or direction I can head to?
This is what I have tried :
PS C:\Users\user> $sa = Get-SPEnterpriseSearchServiceApplication
PS C:\Users\user> Import-SPEnterpriseSearchThesaurus -SearchApplication $sa -FileName \\server_name\testThesaurus.csv
+ CategoryInfo : ResourceUnavailable: (Microsoft.Offic...aurusDictionary:ImportThesaurusDictionary) [Import-SPEnterpriseSearchThesaurus],
InvalidOperationException
+ FullyQualifiedErrorId : Microsoft.Office.Server.Search.Cmdlet.ImportThesaurusDictionary
On ULS I get the following entries:
CtsConnection.StartFlow: Failed to start the flow: Microsoft.ThesaurusDeployment. Exception: System.ServiceModel.FaultException: Cannot start flow. The admin service is unavailable. Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Ceres.ContentEngine.Services.ContentIntegrationEngine.IContentIntegrationEngineManagementAgent.ExecuteFlow(String name, FlowEvaluationConfig config)
at Microsoft.Ceres.ContentEngine.ComponentClient.CtsConnection.StartFlow(String flowName, IDictionary`2 parameters)
MK Sin

Hi,
Please check if it is related to the primary search host controller, make sure it is enabled for the farm, then check results again.
$searchApp = Get-SPEnterpriseSearchServiceApplication
Get-SPEnterpriseSearchLinguisticComponentsStatus -SearchApplication $searchApp
Get-SPEnterpriseSearchHostcontroller
Import-SPEnterpriseSearchThesaurus -SearchApplication $searchApp -Filename \\sp\custom_thesaurus.csv
Thanks
Daniel Yang
TechNet Community Support

ORA-12500 Tns listner failed to start the dedicated server process.

Similar Messages

Maybe you are looking for