Oracel BPm Question: Unable to start BPM Process Web Service

Hello,
I was trying to create a new webservice interface for a BPM proces. However When I try to access the WSDL I ran into this issue:
The WSDL is supposed to be located at:
http://localhost:7001/albpmServices/albpmengine/ws/NewUserServiceListener?wsdl=true
Error 500--Internal Server Error
java.lang.NullPointerException
     at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:176)
     at fuego.ejbengine.servlet.SoapServlet.doPost(SoapServlet.java:75)
     at fuego.ejbengine.servlet.SoapServlet.doGet(SoapServlet.java:62)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3395)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)

For Oracle BPM 10g and 6.0 running on Enterprise WebLogic try:
http://{WebLogicMachineName}:{WebLogic Port}/albpmServices/{Engine-name}/ws
Replace the {WebLogicMachineName} and} {WebLogic Port} with your WebLogic host and port. Replace the {EngineName} with the BPM engine name shown in the Oracle BPM admin console under Engines.
Dan

Similar Messages

Unable to start Oracle Process Manager Service

I installed EPM 11.1.2.1 on Windows 2008 R2.
Oracle database 11g.
I installed and configured every thing was working fine. But suddenly the Oracle Process Manager service is not starting.
I checked in event viewer the following error i found:
The Oracle Process Manager (EPM_epmsystem1) service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Please help me.

Hi Jasmin,
The error was:
The service did not respond to the start or control request in a timely fashion.
Thanks,
Ravi.

OAS Startup OWS-08820: Unable to start oassrv process 'oassrv'.

Dear OAS Product Manager, Oracle fellows & Developer Guys,
I am using Win NT 4.0 Server, Servie Pack 5 (1280)
on Intel Pentium III 550MHz PC - 256MB ram.
8GB Hard Disk 1 with C,D,E,F drives and
another 4GB Hard Disk with G,H drives,
all with FAT.(I have got Win98 in C:)
I have got:
1) Oracle8 (8.0.4) at D:\ORANT
2) Devloper2000 at D:\ORANT
3) Oracle8i (8.1.6) at G:\Oracle8i
4) JDeveloper 3.1 at F:\JDeveloper 3.1
Then I installed OAS 4.0.8.1 at F:\OAS (after closing
all running Oracle processes) with the "Complete" option.
After reboot, I logged into the Oracle Application
Server Manager, and tried to start "ALL" as mentioned in the
documentation. I got the following message:
Site
Please wait while the command is being processed on host elysium ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host elysium.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
PANIC: YS::ERROR::BADFRAME in oassrv at line 66 of
m:\nt_4081_40bit_opt_102099\ows\srchome\ys\src\ys\yse.c
abnormal program termination
OWS-08820: Unable to start oassrv process 'oassrv'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Nothing much is described for this error in the Error Messages section of the documentation.
Please help me out.
Anuj Patel
[email protected]

Check if there is no a pid or trace or any file that is created during the start of this kind of process and remove it and try again. As well you may check if there is a java process from the console kill it and start it.
Greetings

ERROR   ORA-12514: TNS: unable to start extract process

Hi Experts,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Getting below error in logs while starting extract process:
RECOVERY: reset to initial or altered checkpoint.
2012-08-05 10:34:10 ERROR   OGG-00868 Oracle GoldenGate Capture for Oracle, aaa.prm: Attaching to
ASM server asm: (12514) ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
2012-08-05 10:34:10 ERROR   OGG-01668 Oracle GoldenGate Capture for Oracle, aaa.prm: PROCESS
ABENDING.[oracle@ ggate]$
Getting below error while connecting with asm instance directly:
[oracle@ admin]$ sqlplus sys@asm as sysasm
SQL*Plus: Release 11.2.0.1.0 Production on Sun Aug 5 11:16:11 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
[oracle@ ~]$ tnsping asm TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 05-AUG-2012 11:55
:42
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxx-
scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ASM) (I
NSTANCE_NAME = +ASM1)))
OK (0 msec) Any help Please ?
Regards
LazyDBA
Edited by: LazyDBA11g on Aug 5, 2012 12:14 AM
Edited by: LazyDBA11g on Aug 5, 2012 11:25 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:36 AM

Hello JK,
Thanks a lot for specific response.
SQL> select INST_ID, NAME, VALUE from gv$parameter where name like '%_listener%';
INST_ID NAME VALUE
1 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data1-vip)(PORT=1521))))
1 remote_listener xxxdata-scan:1521
2 local_listener (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=xxx_
data2-vip)(PORT=1521))))
2 remote_listener xxxdata-scan:1521
If I add REMOTE_LISTENER pointing to SCAN ip address, Does it require DB bounce ? (Its production DB)
Regards,
LazyDBA
Edited by: LazyDBA11g on Aug 10, 2012 12:01 PM
Edited by: LazyDBA11g on Aug 12, 2012 4:48 AM

Process Web Services and BPM Objects

Hi,
I try to expose a web service for a specific process (not PAPI-WS) for process creation. Works well but only if I use only simple types like String, etc. as input arguments. But when I try to use an BPM object, I get an error like 'Undefined variable 'arg1''.
So, is it not possible to use such a process web service using BPM objects as arguments?
Regards
Matthias

Yes it's true but Netbeans uses one of the existing SOAP implementations to do it. I'm almost sure that it uses one of the most popular implementations JAX-WS RI or Axis by default.
Regards,
Sławomir Wojtasiak

Calling Process Web Service from another BPM project

Hi all,
Scenario: I need to launch an instance of a process in another project, running on another engine.
I figured a Process Web Service was the way to go and I am trying to invoke my Process Web Service method that creates a process. I have tried with and without passing the username token (checkbox in the Process Web Service) to no avail.
Does anyone have some sample code to do this ?
cheers
Tony
10gr3

Hi Matias,
Yeah, thanks. I am testing on Studio and Enterprise (Standalone). I kinda assumed that if username token is required that the wrappers to consume the PWS would take care of that but I guess not ?
I am having problems with "None" now, on enterprise (see below). I think it is one of those when you get so into the problem you dig a big hole and cant see any way out !
Gonna switch to using Papi to launch the instances I think :-(
cheers
Tony
HTTP/1.0 500 INTERNAL SERVER ERROR
Connection: close
Content-Type: text/xml;charset=utf-8
Content-length: 1915
<?xml version="1.0" encoding="UTF-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:MustUnderstand</faultcode>
<faultstring>Did not understand "MustUnderstand" header(s):</faultstring>
<detail>
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">
     at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:96)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453)
     at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:359)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:123)
     at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:206)
     at fuego.http.HttpExecution$1.run(HttpExecution.java:71)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.http.HttpExecution$HttpPrincipal.processBatch(HttpExecution.java:190)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
</ns1:stackTrace>
<ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">myhostname</ns2:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
after submitting:
Host: myhostname:9001
Cache-Control: no-cache
Pragma: no-cache
SOAPAction: "http://bea.com/albpm/GSR_INCR/INCRGNSAutomatic#startSession"
Content-Length: 847
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Header>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" soapenv:mustUnderstand="1">
<wsse:UsernameToken><wsse:Username>anonymous</wsse:Username><wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">anonymous</wsse:Password></wsse:UsernameToken></wsse:Security></soapenv:Header>
<soapenv:Body>
<startSession xmlns="http://bea.com/albpm/GSR_INCR/INCRGNSAutomatic">
<password xmlns="">password</password>
<user xmlns="">user</user>
</startSession>
</soapenv:Body>
</soapenv:Envelope>

Unable to start SQL Server Browser service in Sql server 2005

we are unable to start the SQL browser service on one of our machine with below error.
I believe this to be the reason, why we could not connect to the instance with below error
I tried troubleshooting as mentioned here, by changing
value in registry from 1 to 0, but still no luck.
SQLservices are also running.
Please help on how to resolve this!

Hello,
You say that SQL Server Browser Service belongs to a SQL Server 2005, but based on the name of the instance is a SQL Server
2012 instance.
Do you have any issues installing/uninstalling SQL Server 2005 or 2012? One of them 32-bit and the other 64-bit?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to start User Profile Sync Service

Hi,
I am currently facing some issues with starting the User Profile Sync Service on my SP2013 farm.. I was wondering if someone could help me out a bit.
I have successfully installed the SP2013 farm on a environment that has access to our AD etc. and I have also
restored the database from SP2007 and converted it to Claims authentication etc. The one thing I can’t get to work is to enable the User Profile Sync Service on the server. I have checked quite a bit of TechNet blogs and other sites and tried almost everything
suggested but it still fails. I’ve also recreated the farm from scratch yesterday again but no luck still
L.
The below is what I have done:
Farm Admin account – spadmin2013 is local admin on all SP Farm servers (2 WFE and 2 APP Servers) and has log on locally rights as well on security policy. On the SQL DB it has dbo permissions on the Sync, Profile and Social DB’s.
Farm Service account – spservice-s is a managed farm account that is used to run the various services of the farm (used during the config wizard part).
From within the Admin Control Panel I have verified the managed accounts and it is indeed spadmin2013 which owns the User Profile Sync Service (not the application itself). When I try to start the service it tries to do that for 5-10 minutes and then fails
and goes back to stop and I do not see any error. I have created a custom service application with new database that runs on spadmin2013/spfarm/ldap accounts etc. I can see from the Windows services – FIM and FIMSync service try to start using the spadmin2013
and then go back to disabled. I have also tried giving the spadmin2013 rights to replicate the AD as few blogs suggested that. I am not sure where this is going wrong or what is missing. I had successfully got this to work and still can get it to work on my
first SP2013 server which is a standalone – running SQL, SP app and WFE on the same box.
In fact I also tried to activate this service first before I joined my 3 other servers to the farm and had no luck. I am kinda lost here as to what is going on!

Right. i ran a new log as suggested. I have also cleared the config cache and created a Powershell profile as suggested in this link - http://blogs.msdn.com/b/bryanbolling/archive/2014/01/02/unable-to-start-user-profile-synchronization-service.aspx
I checked the ULS Logs and i can see the below error -
ILM Configuration: Validating account.
ILM Configuration: Validating the system groups
ILM Configuration: Setting up WMI
ILM Configuration: Setting required permissions
ILM Configuration: Create install config file
ILM Configuration: Update source project
ILM Configuration: Changing service account credentials
ILM Configuration: Setting policy for service account
Updating SPPersistedObject UserProfileApplication Name=User Profile Sync Service. Version: 63903 Ensure: False, HashCode: 55647834, Id: ef1ec55c-aa15-4cb7-a9fe-498382a88b4e, Stack:
at Microsoft.Office.Server.Administration.UserProfileApplication.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance)
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
SQL connection time: 131.92704 for Data Source=SPSQLAGL;Initial Catalog="Sync DB";Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name="SharePoint[OWSTIMER][1][Sync DB]"
ILM Configuration: Configuring database
ILM Configuration: Error 'ERR_CONFIG_DB'
UserProfileApplication.SynchronizeMIIS: Failed to configure MIIS post database, will attempt during next rerun. Exception: System.Configuration.ConfigurationErrorsException: ERR_CONFIG_DB
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ValidateConfigurationResult(UInt32 result)
at Microsoft.Office.Server.UserProfiles.Synchronization.ILMPostSetupConfiguration.ConfigureMiisStage2()
at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance).
UserProfileApplication.SynchronizeMIIS: End setup for 'User Profile Sync Service'.
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63899 Ensure: False, HashCode: 36296732, Id: 7aeb377f-8bd1-453d-b6be-6a373eaf350d, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Execution Time=6041.65717333333
Name=Timer Job User Profile Sync Service_ProfileSynchronizationJob
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: -1 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 63913 Ensure: False, HashCode: 13918585, Id: 21e01df1-8772-487d-bd56-f699b3912bda, Stack:
at Microsoft.SharePoint.Administration.SPJobDefinition.Update()
at Microsoft.Office.Server.Administration.UserProfileApplication.StartSynchronizationServiceSetupTimer(String strSyncMachineAddress)
at Microsoft.Office.Server.Administration.UserProfileApplication.SynchronizeMIIS()
at Microsoft.Office.Server.Administration.ILMProfileSynchronizationJob.Execute()
at Microsoft.Office.Server.Administration.UserProfileApplicationJob.Execute(SPJobState jobState)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
I have verified the spadmin2013 does have dbo permissions and also is part of security & sysadmin in sql server. I run SQL 2012 with SP1

Error: Unable to start the bluetooth stack service

HP Pavilion g7-2017us, Windows 7
After starting up I get the error message: UNABLE TO START THE BLUETOOTH STACK SERVICE.
First, I don't know what that means ... Second, I don't know how to remedy the problem.
Can anyone help please? ... THANKS!

Steps I would suggest are:
1. Update Bluetooth Device Driver. Steps to update the device driver:
i. Click on Start
ii. Select Control Panel
iii. Select System and maintenance
iv. Click Device Manager (If you are prompted for an administrator password or confirmation, type the password or provide confirmation.)
v. In the Device manager locate the Blue tooth device
vi. Click the Driver tab, and then select Update driver
If its still not fixed go to step 2
2. Uninstall the Bluetooth device, restart the computer and install the latest drivers.
Link for reference: Update a driver
Broadcom bluetooth Drivers for windows 7 64-bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104112-1&cc=us&dlc=en&lc=en...
Intel Wireless Drivers for windows 64-bit
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104707-1&cc=us&dlc=en&lc=en...
Regards;
Ray
I am an HP employee
Please click the White Kudos star to say thanks for helping.
Please mark Accept As Solution if my help has solved your problem.

Unable to start Sun One Web Server 6.1 SP5 64bits on Solaris 10

Hello,
I installed the Sun One Web Server 6.1 SP5 64bits successfully on a Solaris 10 machine, but was unable to started up the web server application:
The error message is below,
# pwd
/app/SUNWwbsvr61sp5/https-admserv
# ls
ClassCache config restart SessionData stop
conf_bk logs rotate start webapps
# ./start
Sun ONE Web Server 6.1SP5 (64-Bit) B12/02/2005 04:37
failure: CORE3170: Configuration initialization failed: Error running init function load-modules: dlopen of /app/SUNWwbsvr61sp5/bin/https/lib/libj2eeplugin.so failed (ld.so.1: webservd: fatal: libjvm.so: open failed: No such file or directory)
I have searched the forum and found some what similar case but it was for SP4.
Please if anyone had experienced with this please advise how to resolve this issue.
I greatly appreciated,
Thank you
Edited by: n2sun on Jun 12, 2008 10:15 AM

just check the env file for the user who is starting or running that.
say if it is cshell, you can see the following variables in the .cshrc which will be under the user's home directory
setenv JAVAHOME WS_Root/jdk
setenv LD_LIBRARY_PATH WS_Root/lib: /libnow source that file
source .cshrcthen start the webserver.

I get this message when i start the computer :" error : unable to start the bluetooth stack service"

i get this message when i start the computer :" error : unable to start the bluetooth stack service"

If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it.

BTTray Error: Unable to start the Bluetooth Stack Service

I have a HP TouchSmart 610-1190f operating system Windows 7 64-bit
I installed Norton 360 back in January and ran the registry program which corrupted the Bluetooth.
BTTray Error: Unable to start the Bluetooth Stack Service. I know that a system restore will take care of it, but when it happened I did not know that and I also did not know that I can't go back in time like Windows XP. I've tried reinstalling the driver with no luck. Is my only option a System Recovery?

Product Name: HP H8-1160t
Product Number: QC45AV#ABA
I spent over 3 hours with HP chat and in typical fashion they could not solve the problem and requested I restore to original OS. I refused. HP Support needs to figure out a way to RESOLVE a customer problem without first jumping to "please restore your system".
After a second call to HP, they sent me a replacement Wireless Card, and much to my surprise the Hardware Tech showed up as scheduled on a SATURDAY no less; even after being told by HP that no weekend calls are made.
Anyway, the very nice service tech installed the new part and ...drum roll....wait for it...Voila!!!!
NO FIX!! As expected. Why Did HP Software Support think the new card would fix the issue?? HP Software Support is virtually USELESS, actually, lets just say without any equivocation at all: HP SOFTWARE Support is USELESS; HARDWARE SUPPORT IS FANTASTIC...
OK. I FIXED the problem myself:
I downloaded the Broadcom fix:
sp56715.exe
Available from:
ftp://ftp.hp.com/pub/softpaq/sp56501-57000/ sp56715.exe (eliminate the spaces...HP forum would not let me load this VALID site.
I am NOT POSITIVE THAT DOWNLOAD IS FOR YOUR VERSION, BE CERTAIN TO CHECK SYSTEM REQUIREMENTS.
Rebooted, Bluetooth service started up, NO BTTray Stack Error, discovered my device (old LG Cell Phone), connected, and I was able to access the MY Music, Pictures, Video files finally.
Trust me, HP Software Support is a waste of time.

Synchronous call to process web service

Hi All,
Right now in my project I have exposed some process web services to be used by front end. But these process web service are asynchronous and does not return any output unless its an exception. Is there any other approach where front end system can contact OBPM and get response as well stating whether operation has been successfull or not. I am using OBPM 10gR3.
Thanks and Regards,
Yasmin.

Hello Yasmin:
Take a look to this thread. Maybe it can be helpfull.
how to create a process through API in BPM 11g
I hope you find what you are looking for.
isabelbernely

Delayed response while calling the process web service

I have four managed servers in a cluster and the ip addresses are
managed_server_1 -20.20.40.21
managed_server_2 -20.20.40.22
managed_server_3 -140.20.40.23
managed_server_4 -140.20.40.24
The admin server is on 20.20.40.21
I start the managed server from command prompt using the commant
./startManagedWeblogic {name of the managed server} {admin console url} ie
i start managed_server_1 from 20.20.40.21 unix box by going to {weblogic installation}\bin
and running the following command (we have some issues with the node manager so have been using this
method)
./startManagedWeblogic managed_server_1 http://20.20.40.21:17003
similarly i start the other servers from their respestive unix boxes
managed_server_2 from the 20.20.40.22 unix box using the command ./startManagedWeblogic managed_server_2 http://20.20.40.21:17003
managed_server_3 from the 140.20.40.23 unix box using the command ./startManagedWeblogic managed_server_3 http://20.20.40.21:17003
managed_server_4 from the 140.20.40.24 unix box using the command ./startManagedWeblogic managed_server_4 http://20.20.40.21:17003
all these servers are in the cluster named BPM_cluster and the bpmengine is deployed onto this cluster
when i deploy the application to the bpmengine it gets properly deployed onto the servers
and i could see the process web services getting generated
but when i try to call these webservices for each managed server seperately
the response from managed_server_1 and managed_server_2 takes leass tha 2 secs
but the response from managed_server_3 and managed_server_4 takes about 25 secs
I am not able to figure out why us taking so long from the managed servers 3 and 4
the bpmengine ds and directory ds have the cluster as targets (I also tried to point to all the servers in the cluster even that
didnot work). I feel that there is db connectivity issue from the servers but i am not sure how to check that.
Can anyone help me with this ?
Thanks

Please make sure that your solman box meet the software prerequisit as per this note below
1483508 : Solution Manager 7.1: Root Cause Analysis pre-requisites
This will solve that ptoblem .
Best Regards
Jai Wardhan

Errors when processing web service call

Hello Experts,
Based on a requirement, I got a URL based on WSDL, using which I created a Consumer Proxy in SAP.
I created a Logical Port in SOA Manager with type selected as 'WSDL'.
When I'm trying to execute the proxy class to call the webservice using the logical port through SE80 it is throwing an error log as stated below.
1) SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
2)Error when processing Web service call
3)Error when calling SOAP Runtime functions: Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
Kindly help me out.
Thanks,
Vamshi

Hi,
Check Anton's reply in this thread: External WS Consumption Issue
Also refer the below doc which may help you: Consume an External Web Service in a Nutshell with Good Old ABAP
Calling WebServices from ABAP via HTTPS
Regards,
Kiran

Oracel BPm Question: Unable to start BPM Process Web Service

Similar Messages

Maybe you are looking for