Oracle 10g database listener port range?

Hi there
Can you share me oracle 10g database listener port range (start port to end port No). default port is 1521
Regards
Jewel
Edited by: user623166 on Jul 31, 2012 10:41 PM

I think you will find your answer in below thread :
listener port number
Osama ..

Similar Messages

Oracle 10g database listener won't start now that I have VPN for work

Hi,
I recently had VPN installed for work on my laptop so I could work from home. Work has a variety of oracle stuff installed and now available to me. However now the listener for my 10g database local on my laptop is unable to start - I start it and it just stops. Does anyone know what I can do about this?
thx
Adam

lol, it's ok - i forgot to configure listener.ora
cheers
adam

Oracle 11g database Listening Port

Hi,
It can allow only 127.0.0.1 through this port that is localhost.
"TCP 127.0.0.1:1521 0.0.0.0:0 LISTENING" how can i create one more IP LISTENING port. I want to access my db using ip address without(localhost) Kindly help.
The below format:
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENING
Thanks.

971363 wrote:
It can allow only 127.0.0.1 through this port that is localhost.
"TCP 127.0.0.1:1521 0.0.0.0:0 LISTENING" how can i create one more IP LISTENING port. I want to access my db using ip address without(localhost) Kindly help.
The below format:
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENINGThis endpoint, +0.0.0.0+, listens on port 1521 on all IP addresses of that platform. Including any new dynamically created IPs. Including localhost. The socket parameter is called INADDR_ANY - lots of info available on it (use your favourite search engine).
To bind an Oracle listener to a specific IP, use that specific IP address (dotted format). Do not use the hostname, as the listener by default interprets it as an INADDR_ANY option.
As for not wanting to use localhost.. why not? What are the reasons for this? It cannot be a network security issue.

Win32 Oracle 10g Database Server Installation problems

Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkk

I can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock;

Oracle 10g Database control installation error

Hi,
Installing oracle 10g database control had give me an error.But Repository created successfully . please find the log file below
Is there i need to install ...? before i start to run emca to install Database Control.
my points of interest are here
FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
i didn't find jms.xml,rmi.xml,http-web-site.xml etc in this location /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/
File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not exist
Let me know how to slove this error.
Thanks,
anil
Error
=========
emca -config dbcontrol db -repos create
STARTED EMCA at Apr 8, 2008 4:33:25 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXX
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /opt/db/oracle/product/10.2.0
Database hostname ................ xxx.xxxx.local
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 8, 2008 4:34:55 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Could not complete the configuration. Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
the following is log generated (emca_2008-04-08_04-33-25-PM.log)
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [opt/db/oracle/product/10.2.0]
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/db/oracle/product/10.2.0
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml in searching for tag jms-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1172)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml in searching for tag rmi-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1176)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml in searching for tag web-site
with attribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1180)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/install/staticports.ini
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /opt/db/oracle/product/10.2.0:mcidm11.pacs11.local:null:SDM:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_SDM value: 3938
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_SDM value: 1158
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_SDM value: 5540
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_SDM value: 5520
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: SDM : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-08_04-34-58-PM.log
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:503)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)

Hi all,
i started creating database control repository, when i saw emca running i had seen repository created successfully , but sysman user is not created at this point of time. Then i looked into emca_repos_create_2008-04-10_11-57-03-AM.log file but the file is unable to open because it's looking for file emreposcre.sql which creates sysman user in this location /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
i feel while installing the database these files are not created....? or i need to run any scripts before running emca ....?
give me some inputs to this thread.
Thanks,
nil
STARTED EMCA at Apr 10, 2008 11:55:41 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXXXX
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 10, 2008 11:57:02 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollog
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 10, 2008 11:57:03 AM
mcidm11 10.2.0/bin>
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-10_11-57-03-AM.log
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
mcidm11 emca/SDM> pwd
/opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM
mcidm11 emca/SDM> more emca_repos_create_2008-04-10_11-57-03-AM.log
SP2-0310: unable to open file "/opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/emreposcre.sql"mcidm11 emca/SDM> cd
Directory: /opt/db
mcidm11 /opt/db> cd /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
Directory: /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql
mcidm11 emdrep/sql> ls
core db ias ocs

ERROR: Install cannot verify the oracle 10g Database

I just completed installation of the SES 10.1.8.2 version and am now trying to apply the 10.1.8.4 Service Pack. After the OUI screen asks for my sys password, I click on Next and receive a popup error message that reads,
Install cannot verify the oracle 10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct.
The installer log file (installActions2010-04-15_08-56-19PM.log) shows this:
*** Specify the SYS Password Page***
Calling Query EmQueries4.2.2 checkUserExists
schemaName = SYS
schemaPassword = Protected value, not to be logged
connectString = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=HostNodeName_1)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Ses01.HostNodeName_1)))
userName = EQSYS
Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: Got minus one from a read call
Error:*** Alert: Install cannot verify the Oracle10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct. ***
User Selected: Yes/OK
===
I've verified that I can login as EQSYS using sqlplus. Also tested that I can login as sys, too. I've also tested the login using the Admin console and that is fine, too.
Any ideas on what is causing this or how to fix it is most welcome as I've not encountered this error before when installing SES or a service pack. I've even tried the OUI for Service pack 10.1.8.3 but also get the same error.
I've checked the listener.ora and tnsnames and they are OK. I've checked and the listener is running and so is the DB.
Right now, I have the Oracle SES instance up and running at 10.1.8.2 but need to upgrade this to the same level as the other SES search nodes.
Edited by: user8655787 on Apr 15, 2010 2:18 PM
My listener.log file is showing this message each time, I run the OUI and enter the sys password and click "Next"
15-APR-2010 23:17:05 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client

A couple of other things that I have tried but have had no affect. I'm still getting the same error:
1. Tried recreating the orapwd file
orapwd file=orapwprdses01 password=prdses01
And make sure that the pfile or spfile has:
remote_login_passwordfile='EXCLUSIVE'
another OTN posting said to try this:
1. Go to directory $ORACLE_HOME/network/admin
2. Modify sqlnet.ora file with following parameter:
tcp.validnode_checking = no
3. If you don't want to disable this, you can put the machine names as follows:
tcp.invited_nodes=(machine1, machine2)
3. Bounce the listener.
.... but, I'm still getting the same error when trying to run the .runInstaller OUI for the service pack for 10.1.8.4.

Connect Oracle 10g client to the Oracle 10g database behind a firewall

I need to connect an Oracle 10g client to the Oracle 10g database (windows server 2003 box) behind a firewall. I ran into this problem: Port redirection. Port redirection requires the Oracle client to connect to the database using a different port (usually a randomly selected TCP port) than the default or originally configured one. If there is no firewall between the server and the client, port redirection will not affect the actual connection. However, if port redirection does occur with the server behind a firewall, the client will be likely to suffer from a connectivity failure. The reason is simple: the newly assigned port based on port redirection is often blocked by the firewall. Such failures are not uncommon on Windows platforms.
I don't know how to stablished an unique TCP port.
I Enabled USE_SHARED_SOCKET on the Oracle database server, windows registry. Acording to what I read,that will force the server machine to share its port 1521 and thus all clients will stay on that port when connecting to the database. Noticeably, port redirection will not occur with USE_SHARED_SOCKET enabled, but that's true in oracle 8 or oracle 9. In oracle 10g this solution doesn't work.
I will apreciate any help about this. Please!
Thanks in advanced.

Three solutions in order of preference
1 Use Connection Manager on the server (only installed using a Custom Install). This will tunnel all traffic through a single port. It will also allow you to configure allowable nodes
2 Set up shared server to use a fixed port. Disadvantage: shared server has overhead and the number of connections is limited
3 Use shared_sockets. Disadvantage: when you stop the listener everyone is disconnected.
Sybrand Bakker
Senior Oracle DBA

Oracle 10g Database conflicts with HTMLDB

Hai all,
I have encountered a strange conflict when I am trying to work out with Oracle 10g database and the famous HTML DB.
It is like this:
I have a 10g DB installed and an ASP application that works on this 10g instance via "Microsoft ODBC driver for oracle" perfectly.
Now I have downloaded and installed the 10g Companion CD and installed the HTML DB 1.5 along with the mandatory Apache web server. Good!! I could scrawl through the database using the HTML DB, creating applications, forms, items and etc fancy things without any issues.
The problem that I found was:
The ASP based application that used to work initially now is erroring out saying that "TNS could not resolve service name".
I thought that the Listener might be damaged or the ASP site was damaged or the Microsoft ODBC driver files were damaged and several other vauge guessings.
I have tested the issue in several ways (reinstalled oracle, the DB, the ASP Applicaton, re-configurin listener in a variety of ways) but every time installing BLINDLY the companion CD too. Nothing seem to work.
Then I recollected that the same issue I have encountered in the past with the installation of Oracle 8i and Developer 2000, where the TNS listener configured by the former damages the one configured by the later and vice-versa.
Basing on this past reminiscence, I finally stopped installing Companion CD over the Oracle installation and carried out the DB installation and the ASP based app. And everything worked fine.
CAN anybody tell me what is going wrong with these two oracle products(Oralce 10g DB and the HTML DB+Apache)?
WHY always the installation of a CLIENT SW (Developer, HTML DB etc) damages the connection with the database via ODBC drivers?
Many Thanks in advance.
Ravi

Dera Mr. Tyler,
Thanks for your reply...I have implemented the solution that you have given for the TNS Listener conflict and everything works fine...
Here I have one more thing thats not working as I thought. do kindly help me out.
My requirement is to show the list of available storage drives (say C:, d:, e: etc on windows) available on the database server. Let me eloborate my problem well....
i have a Java App that executes a specific SQL script to create a tablespace, a user and the required db objects that my applicaiton needs.
if the Java App runs on the same machine where the oracle instance is running, the Java app pops up a list of available drives on the machine, creates a directory for the tablespace datafiles on the drive selected from the above list box, then runs the script which creates the tablespace and the rest of the things.
But if i run the Java app from another machine on the network, then my BLIND java app is popping up the drives of the local machine but NOT those from the oracle server machine and creates the folder on the local machine but not on the Oracle server and obviously the rest of the phases (tablespace creation itself) are failing as the required folder is not found on the oracle server machine.
the work arounds that i am thinking are:
a) use java ->
get the IP of the oracle server machine ->
use some java api such as java.net, java.io etc ->
create the required folder on the server machine instead of the local machihe
ISSUE: Java network programming is too tough for me(excuse me for this..i am not too good!!)
b) use some oracle sql or pl/sql api s to do the same
ISSUE: not found one!!!!
c) create a java stored procedure/function to get the list of drives of the oracle server and return as a string variable. then call this proc from the Java app once connected to the database....
ISSUE: i have created the SO-CALLEd java func. no compilation or loading errors. but there is no o/p either. but the same code when i run as a java class is showing the desired o/p. here is the code piece...can you please help me out!!!
-------Java Stored Function------
import java.io.*;
public class HDDLister
     public static String listDrives()
          String rootsList = "Available Roots: ";
          try
               File[]roots = File.listRoots();
               for (int i=0;i<roots.length;i++)
                    rootsList += roots.toString();
                    rootsList += "#";
          catch(Exception ex)
               rootsList = ex.toString();
          return rootsList;
-------Command to publish the Funciton-------
CREATE OR REPLACE FUNCTION HDDLISTER
RETURN VARCHAR2
IS
LANGUAGE JAVA
NAME 'HDDLister.listDrives() return java.lang.String';
and finally the point of the problem is, once we show the drives available on the server machine to the user and the user selects a drive, how to create a folder on the server machine???
Thousands of thanks in advance
Ravi

Oracle 10g - Database does not respond to the application users

Hi all,
I am using ORACLE 10g database with 75 users connections 50 local and 20 remote users using ADSL and dial up modem. Operating system on server is
Windows 2003.
All of a sudden users making the entry get disconnected getting the error as
ORA-12516: TNS:listener could not find available handler with matching protocol stack
Other case users when using the appliaction get their PC hanged and connection
to oracle fails again. they cannot login to the application that time, the error is
ORA-04031: unable to allocate %s bytes of shared memory ("%s","%s","%s","%s")
Twice a day the users trying to login cannot access the database server.
Front end application is in VB using exe file. When the users cannot logon
to the database. I manually stop the ORACLE services(including DB console) and
then stop the listener.
This practice is going on since last two months.
Server Scenario
After Installing Oracle Standard Edition 10g.
System tablespace utilization is 98.5% which is 465 MB out of total 470 MB.
There is only one Rollback Segment named as SYSTEM.
when we install 9i 4 rollback segments as RO1, RO2, RO3, RO4 are created
by default.
Do I need to add the datafile to SYSTEM table space as its current usage is 99.15% and its auto extend is ticked on using auto extent as 10 MB. I tried adding another datafile during weekend downtime. when I resumed on saturday morning I found it did not add any datafile which I had put on thursday eveninig as system02.dbf.
Do I need to add a new datafile to the SYSTEM tablespace ?
Do I need to create new rollback segments apart from SYSTEM rollback segment ?
My current schema size 15360Mb with its usage as 9.32% (1432.25 Mb).
Please reply !!!

Hi Paul
My Server configuration is
Compaq ML 370
3.4 Ghz Processor
3.5 GB RAM
SQL> show sga
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
SQL> select * from v$sgastat;
POOL NAME BYTES
fixed_sga 787988
buffer_cache 25165824
log_buffer 524288
shared pool subheap 55600
shared pool KQR L SO 218160
shared pool KQR M PO 1329244
shared pool KQR M SO 605364
shared pool KQR S PO 164156
shared pool KQR S SO 6144
shared pool KTI-UNDO 1235304
shared pool sql area 5368208
shared pool KGLS heap 1597560
shared pool joxs heap 6004
shared pool row cache 3707272
shared pool parameters 17520
shared pool repository 19396
shared pool ASH buffers 4194304
shared pool free memory 16586072
shared pool PL/SQL DIANA 679456
shared pool KSPD key heap 4220
shared pool PL/SQL MPCODE 1167992
shared pool library cache 11368964
shared pool miscellaneous 25942980
shared pool pl/sql source 88
shared pool PLS non-lib hp 29816
shared pool XDB Schema Cac 3594144
shared pool alert threshol 3460
shared pool joxlod exec hp 355820
shared pool table definiti 5880
shared pool temporary tabl 4932
shared pool trigger defini 12848
shared pool trigger inform 1892
shared pool type object de 20256
shared pool private strands 1198080
shared pool event statistics per sess 4384640
shared pool fixed allocation callback 304
large pool free memory 8388608
java pool joxs heap 233856
java pool free memory 44743296
java pool joxlod exec hp 5354496
40 rows selected.
SQL> select segment_name, owner, status
2 from dba_rollback_segs;
SEGMENT_NAME OWNER STATUS
SYSTEM SYS ONLINE
_SYSSMU1$                      PUBLIC ONLINE
_SYSSMU2$                      PUBLIC ONLINE
_SYSSMU3$                      PUBLIC ONLINE
_SYSSMU4$                      PUBLIC ONLINE
_SYSSMU5$                      PUBLIC ONLINE
_SYSSMU6$                      PUBLIC ONLINE
_SYSSMU7$                      PUBLIC ONLINE
_SYSSMU8$                      PUBLIC ONLINE
_SYSSMU9$                      PUBLIC ONLINE
_SYSSMU10$                     PUBLIC ONLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU11$                     PUBLIC ONLINE
_SYSSMU12$                     PUBLIC ONLINE
_SYSSMU13$                     PUBLIC ONLINE
_SYSSMU14$                     PUBLIC ONLINE
_SYSSMU15$                     PUBLIC OFFLINE
_SYSSMU16$                     PUBLIC OFFLINE
_SYSSMU17$                     PUBLIC OFFLINE
_SYSSMU18$                     PUBLIC OFFLINE
_SYSSMU19$                     PUBLIC OFFLINE
_SYSSMU20$                     PUBLIC OFFLINE
_SYSSMU21$                     PUBLIC OFFLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU22$                     PUBLIC OFFLINE
_SYSSMU23$                     PUBLIC OFFLINE
_SYSSMU24$                     PUBLIC OFFLINE
_SYSSMU25$                     PUBLIC OFFLINE
_SYSSMU26$                     PUBLIC OFFLINE
27 rows selected.
Currently AUTOEXTEND is ticked as on for SYSTEM tablespace and its size is showing as 99.16% (466.06 mb) used which is very much nearing to its full capacity of 470 mb.
Currently 75 users - 50 Local users and 20 Remote Users are connected to the server. Is there any limit that Server should have limited connections.
Server has Windows 2003 Standard Edition. Has Windows 2003 anything to do
with the no. of users getting connected ?

Oracle 10g database homepage not working?

Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck

What is the function of _xdb and _xpt services in oracle 10g database.

what is the function of xdb and xpt services in oracle 10g database.?

Hi,
If you are troubleshooting check the below link too:
Issues installing. Listener not working
Best regards,
Rafi.
http://rafioracledba.blogspot.com/

Setup E-mail notification in Oracle 10g Database

Friends ,
I want to set E-mail notification in my Database(Oracle 10g Database) . So that If any major issues are occured , then a mail is recieved in my mailbox .
I set the mail server gateway address (like server.xyz.com as well as IP '74.52.97.226' of mail server) , but it cannot recognize the server . But I can ping that server easily .
When I press "Test Mail Server" then it shows the error :
"74.52.97.226: Test failed with message: "Could not connect to SMTP host: 74.52.97.226, port: 25; nested exception is: java.net.SocketException: Software caused connection abort: connect"
Now plz tell me, How can I set the E-mail Notification in my database ?

E-mail notification has been made more easy in 10g bu the in troduction of UTL_MAIL
refer to [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#ARPLS384]
[http://download.oracle.com/docs/cd/B19306_01/server.102/b25166/cfrulset.htm#BABFIEEI]
[http://vasudevank.blog.co.in/2008/09/02/oracle-utl_mail/]
HTH
Anand

"dbstart" error in oracle 10g database in LINUX

Hi,
i have oracle 10g database in LINUXwhen i give "dbstart" command under oracle database bin folder, i get following error
"Failed to auto-start Oracle Net Listene using /ade/vikrkuma_new/oracle/bin/tnslsnr"
how can i fix this error.
i want to make oracle listener, database and EM db console as auto start during system start up.
i think if this dbstart command is not working, then i am not sure how else can i make them autostart
how can i acheive this.
Thanks in Advance,
Philip.

--- Posted: Oct 19, 2005 3:38 PM
lol, I believe he must have figured it out one way or another.

Oracle 10g DB listener does not work.

I am in a terrible situation.
My oracle 10g db listener often hang without any sign.
For example , sometimes user sql select one minute ago , then the database could't be conected next minute .
Even i command lsnrctl stop and start , the listener is over .
I have to kill process then start listener.
I try to find out what for , but i am don't know how to do .
May any one tell my why or how ?
Thank you .

Thank you .
I find how to happen the problem . It should be bug 4518443 .
Now i have another question .
I want to apply patch ,but fails.
following is my command line :
[oracle@localhost ~]$ opatch lsinventory
-bash: opatch: command not found
When I cd $oracle_home/OPatch , i find opatch file.
Iam not sure why i can't apply patch .
Thak you .

Can not start opmn after change OracleAS Metadata Repository Listener Port

Hello,
I installed OracleAS metadata Repository Listener Port, And i change the port of the listener, then flowwoing the manual was needed start teh OID component
But I won´t start

Roberto,
The tail of OIDCTL.log is:
09/02/23 19:14:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/02/23 19:58:44 Start process
oidctl:oidmon is not running on u47.un.mx, waiting for a few seconds...
09/03/02 16:02:43 Start process
09/03/04 15:57:21 Start process
And the tail for oidmon.log:
2009/03/02:16:02:43 * oidmon_u47pacrm01.unitec.mx:0 *
Updating Process Table...
2009/03/04:14:52:11 * Killed process pid = 1345
2009/03/04:14:52:11 * Monitor Process id = 1345 Terminated
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1374
2009/03/04:14:52:11 * ODISRV Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:14:52:11 * Sent SIGTERM to process id = 1370
2009/03/04:14:52:11 * OIDLDAPD Instance 1 deleted from registry
2009/03/04:14:52:11 * Updating Process Table...
2009/03/04:15:57:21 * Connecting to database, connect string is te04as
2009/03/04:15:57:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:57:23 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * Connecting to database, connect string is te04as
2009/03/04:15:57:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:57:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:01 * Connecting to database, connect string is te04as
2009/03/04:15:58:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:21 * Connecting to database, connect string is te04as
2009/03/04:15:58:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:58:41 * Connecting to database, connect string is te04as
2009/03/04:15:58:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:58:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:01 * Connecting to database, connect string is te04as
2009/03/04:15:59:01 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:21 * Connecting to database, connect string is te04as
2009/03/04:15:59:21 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:15:59:41 * Connecting to database, connect string is te04as
2009/03/04:15:59:41 * [gsdsiConnect] ORA-0,
2009/03/04:15:59:41 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:01 * Connecting to database, connect string is te04as
2009/03/04:16:00:01 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:01 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:21 * Connecting to database, connect string is te04as
2009/03/04:16:00:21 * [gsdsiConnect] ORA-0,
2009/03/04:16:00:21 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:00:41 * Error connecting database. -1
2009/03/04:16:00:41 * Error : Guardian Process terminated
2009/03/04:16:50:45 * Connecting to database, connect string is te04as
2009/03/04:16:50:45 * [gsdsiConnect] ORA-0,
2009/03/04:16:50:45 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:16:50:47 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * Connecting to database, connect string is te04as
2009/03/04:17:18:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:18:38 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * Connecting to database, connect string is te04as
2009/03/04:17:18:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:18:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:16 * Connecting to database, connect string is te04as
2009/03/04:17:19:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:36 * Connecting to database, connect string is te04as
2009/03/04:17:19:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:19:56 * Connecting to database, connect string is te04as
2009/03/04:17:19:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:19:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:16 * Connecting to database, connect string is te04as
2009/03/04:17:20:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:36 * Connecting to database, connect string is te04as
2009/03/04:17:20:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:20:56 * Connecting to database, connect string is te04as
2009/03/04:17:20:56 * [gsdsiConnect] ORA-0,
2009/03/04:17:20:56 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:16 * Connecting to database, connect string is te04as
2009/03/04:17:21:16 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:16 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:36 * Connecting to database, connect string is te04as
2009/03/04:17:21:36 * [gsdsiConnect] ORA-0,
2009/03/04:17:21:36 * [oidmon]: Unable to connect to database,
will retry again after 20 sec
2009/03/04:17:21:56 * Error connecting database. -1
2009/03/04:17:21:56 * Error : Guardian Process terminated
-----

Oracle 10g database listener port range?

Similar Messages

Maybe you are looking for