Oracle 10g database listener won't start now that I have VPN for work
Hi,
I recently had VPN installed for work on my laptop so I could work from home. Work has a variety of oracle stuff installed and now available to me. However now the listener for my 10g database local on my laptop is unable to start - I start it and it just stops. Does anyone know what I can do about this?
thx
Adam
lol, it's ok - i forgot to configure listener.ora
cheers
adam
Similar Messages
-
Oracle 10g Database Setup Won't Start on Win XP Pro
I am new to Oracle and have just downloaded the 10g database from the Oracle website and am trying to install it on my Windows XP Professional Machine. When I double click "setup.exe" the hourglass timer appears very briefly but then nothing happens. Does anyone know why this would be? Thanks.
Try using the setup.exe in the install folder instead. If that doesn't work, verify that your download was ok (you should be able to verify the size of the downloaded file with that on the download page of OTN) and also verify that your hardware meets the minimum requirements for installation (see documentation in your doc folder).
-
Oracle 10g database listener port range?
Hi there
Can you share me oracle 10g database listener port range (start port to end port No). default port is 1521
Regards
Jewel
Edited by: user623166 on Jul 31, 2012 10:41 PMI think you will find your answer in below thread :
listener port number
Osama .. -
My time machine backup disc has apps from Mountain Lion that won't open now that I have Yosemite. They all say need to be upgraded to Yosemite. Go to app store. But app store sees that I have yosemite so doesn't even show me an udate option. How can Update these files??
How do you know they won't run in Yosemite? You're not trying to fiddle with stuff in your backup from the Finder, are you? If so you are likely to render that backup unusable.
WHen when you restore them from your backup, they should be updateable. -
firefox won't start at all
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The hotness suggests a hardware problem
Apple Retail Store - Genius Bar -
Feeling like a total fool, now that I have solved for the most part Audigy LS probl
As the subject says, I feel like a total fool for having for the most part solved my problems with the Audigy LS. I have to say I'm sorry to Creative Labs for being so hot headed in my previous posts, as I got to thinking about it logically and decided to try a few more things before I gave up entirely.
Uninstalled the drivers/software and moved it to the last PCI slot on my motherboard, which hel
ps.
Didn't mess with Dolby Digital Decoding, which is off by default when the drivers are installed.
Set PCI Latency to 64 in the bios of my motherboard, which helps, for some reason the card doesn't like a PCI Latency of 32, beats me why it doesn't.
I do know the Audigy LS, will slow down to a crawl for processing soundif the PCI latency is set to 28, doesn't have a problem with a PCI Latency of either 64 or 96. Found this out on my system.
I can play games now, with minimal suttering. Ultimately, I came to the realization that the Audigy LS is for lack of better terminology a budget/low end soundcard and that it's time to upgrade, as it doesn't do hardware processing of EAX. Decided to update to an Audigy 2 within the next few weeks. I might get the Audigy 2 Value card if it is any good, as I already have firewire on my motherboard.
Here's my system specs, if it will help Creative Labs in trying to find a solution, though I do think a new set of drivers for the Audigy LS would help dramatically.
Intel 865PERLK motherboard
GB of PC3200 memory
3.06GHZ 533FSB Pentium 4
ATI Radeon X800 Pro
Highpoint Rocket 00 Ultra IDE card with 3 Western Digital harddri'ves attached.
Netgear FA3 network card for net connection
SB Audigy LS
LG 52X CDROM, LG 52X32X52X CDROM, LG 6X DVDROMAlmost forgot, the games that give me the most trouble for stuttering are C&C Generals and Lord Of The Rings: The Battle For Middle Earth.
I'm going to dig through each game's ini file, and search on the internet to see if there is anything that could help me. It's also a possibility that the stuttering could be a bug in ATI's Catalyst 5. drivers. -
Now that Nike+ is going to work with the iPod touch...
Will my already purchased Nike+ hardware work with my iPhone, using the next OS release (2.1)?
Here here! Make the dongle from the $29 Nike+ kit work with the iPhone! Do it now! Now that you have iPod touch working with Nike+ there is no excuse not to implement this. If you do in fact have a technical reason for withholding this upgrade at least make it known SOMEWHERE on your website Apple.
-
Error starting up Oracle 10g database.
Hi,
(I had shutdown my database by "shutdown abort")
Now i'm getting the following error while trying to startup Oracle 10g database version :- 10.2.0.1.0.
SQL> startup nomount
ORA-07345: The datafile name must not contain the string '..'.
I get the same error even for startup/ startup mount
currently i'm using only pfile for startup as there is no spfile in dbs directory.Hi Kuljeet,
This is a very strange error, i know, controlfile contains are not read in "no mount" state of database... still i'm getting the error.
The contents of my pfile are as follows :-
============================================================
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_dest_1='location=/net/nasdbdmp/vl/nasdbdmp/db_dumps/OQF/data/arch'
#log_archive_format=%t_%s_%r.dbf
log_archive_format=%t_%s_%r
##log_archive_dest='/net/nasdbdmp/vl/nasdbdmp/db_dumps/OQF/data/arch'
# Cache and I/O
db_block_size=8192
# Cluster Database
cluster_database=FALSE
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=DSOLPROD
# Diagnostics and Statistics
background_dump_dest=/vl/dsolprod/oracle/product/admin/DSOLPROD/bdump
core_dump_dest=/vl/dsolprod/oracle/product/admin/DSOLPROD/cdump
user_dump_dest=/vl/dsolprod/oracle/product/admin/DSOLPROD/udump
# Distributed, Replication and Snapshot
open_links=4
# File Configuration
control_files=("/vl/dsolprod/ora2/control/control01.ctl")
db_recovery_file_dest=/vl/dsolprod/db_dumps
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=5
# Miscellaneous
compatible=10.2.0.1.0
# NLS
nls_date_format=dd-mm-yyyy
# Optimizer
optimizer_mode=CHOOSE
# Processes and Sessions
processes=150
# Redo Log and Recovery
log_buffer=22479872
log_checkpoint_interval=10000
log_checkpoint_timeout=1800
# SGA Memory
sga_max_size=314032288
sga_target=314032288
# Security and Auditing
audit_trail=DB
os_authent_prefix=OPS$
remote_os_authent=TRUE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_retained_size=65536
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
=========================================================== -
Oracle 10g DB listener does not work.
I am in a terrible situation.
My oracle 10g db listener often hang without any sign.
For example , sometimes user sql select one minute ago , then the database could't be conected next minute .
Even i command lsnrctl stop and start , the listener is over .
I have to kill process then start listener.
I try to find out what for , but i am don't know how to do .
May any one tell my why or how ?
Thank you .Thank you .
I find how to happen the problem . It should be bug 4518443 .
Now i have another question .
I want to apply patch ,but fails.
following is my command line :
[oracle@localhost ~]$ opatch lsinventory
-bash: opatch: command not found
When I cd $oracle_home/OPatch , i find opatch file.
Iam not sure why i can't apply patch .
Thak you . -
Win32 Oracle 10g Database Server Installation problems
Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkkI can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock; -
Oracle 10g Database conflicts with HTMLDB
Hai all,
I have encountered a strange conflict when I am trying to work out with Oracle 10g database and the famous HTML DB.
It is like this:
I have a 10g DB installed and an ASP application that works on this 10g instance via "Microsoft ODBC driver for oracle" perfectly.
Now I have downloaded and installed the 10g Companion CD and installed the HTML DB 1.5 along with the mandatory Apache web server. Good!! I could scrawl through the database using the HTML DB, creating applications, forms, items and etc fancy things without any issues.
The problem that I found was:
The ASP based application that used to work initially now is erroring out saying that "TNS could not resolve service name".
I thought that the Listener might be damaged or the ASP site was damaged or the Microsoft ODBC driver files were damaged and several other vauge guessings.
I have tested the issue in several ways (reinstalled oracle, the DB, the ASP Applicaton, re-configurin listener in a variety of ways) but every time installing BLINDLY the companion CD too. Nothing seem to work.
Then I recollected that the same issue I have encountered in the past with the installation of Oracle 8i and Developer 2000, where the TNS listener configured by the former damages the one configured by the later and vice-versa.
Basing on this past reminiscence, I finally stopped installing Companion CD over the Oracle installation and carried out the DB installation and the ASP based app. And everything worked fine.
CAN anybody tell me what is going wrong with these two oracle products(Oralce 10g DB and the HTML DB+Apache)?
WHY always the installation of a CLIENT SW (Developer, HTML DB etc) damages the connection with the database via ODBC drivers?
Many Thanks in advance.
RaviDera Mr. Tyler,
Thanks for your reply...I have implemented the solution that you have given for the TNS Listener conflict and everything works fine...
Here I have one more thing thats not working as I thought. do kindly help me out.
My requirement is to show the list of available storage drives (say C:, d:, e: etc on windows) available on the database server. Let me eloborate my problem well....
i have a Java App that executes a specific SQL script to create a tablespace, a user and the required db objects that my applicaiton needs.
if the Java App runs on the same machine where the oracle instance is running, the Java app pops up a list of available drives on the machine, creates a directory for the tablespace datafiles on the drive selected from the above list box, then runs the script which creates the tablespace and the rest of the things.
But if i run the Java app from another machine on the network, then my BLIND java app is popping up the drives of the local machine but NOT those from the oracle server machine and creates the folder on the local machine but not on the Oracle server and obviously the rest of the phases (tablespace creation itself) are failing as the required folder is not found on the oracle server machine.
the work arounds that i am thinking are:
a) use java ->
get the IP of the oracle server machine ->
use some java api such as java.net, java.io etc ->
create the required folder on the server machine instead of the local machihe
ISSUE: Java network programming is too tough for me(excuse me for this..i am not too good!!)
b) use some oracle sql or pl/sql api s to do the same
ISSUE: not found one!!!!
c) create a java stored procedure/function to get the list of drives of the oracle server and return as a string variable. then call this proc from the Java app once connected to the database....
ISSUE: i have created the SO-CALLEd java func. no compilation or loading errors. but there is no o/p either. but the same code when i run as a java class is showing the desired o/p. here is the code piece...can you please help me out!!!
-------Java Stored Function------
import java.io.*;
public class HDDLister
public static String listDrives()
String rootsList = "Available Roots: ";
try
File[]roots = File.listRoots();
for (int i=0;i<roots.length;i++)
rootsList += roots.toString();
rootsList += "#";
catch(Exception ex)
rootsList = ex.toString();
return rootsList;
-------Command to publish the Funciton-------
CREATE OR REPLACE FUNCTION HDDLISTER
RETURN VARCHAR2
IS
LANGUAGE JAVA
NAME 'HDDLister.listDrives() return java.lang.String';
and finally the point of the problem is, once we show the drives available on the server machine to the user and the user selects a drive, how to create a folder on the server machine???
Thousands of thanks in advance
Ravi -
Oracle 10g Database control installation error
Hi,
Installing oracle 10g database control had give me an error.But Repository created successfully . please find the log file below
Is there i need to install ...? before i start to run emca to install Database Control.
my points of interest are here
FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
i didn't find jms.xml,rmi.xml,http-web-site.xml etc in this location /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/
File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not exist
Let me know how to slove this error.
Thanks,
anil
Error
=========
emca -config dbcontrol db -repos create
STARTED EMCA at Apr 8, 2008 4:33:25 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXX
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /opt/db/oracle/product/10.2.0
Database hostname ................ xxx.xxxx.local
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 8, 2008 4:34:55 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Could not complete the configuration. Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
the following is log generated (emca_2008-04-08_04-33-25-PM.log)
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [opt/db/oracle/product/10.2.0]
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/db/oracle/product/10.2.0
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml in searching for tag jms-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1172)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml in searching for tag rmi-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1176)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml in searching for tag web-site
with attribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1180)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/install/staticports.ini
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /opt/db/oracle/product/10.2.0:mcidm11.pacs11.local:null:SDM:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_SDM value: 3938
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_SDM value: 1158
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_SDM value: 5540
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_SDM value: 5520
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: SDM : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-08_04-34-58-PM.log
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:503)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)Hi all,
i started creating database control repository, when i saw emca running i had seen repository created successfully , but sysman user is not created at this point of time. Then i looked into emca_repos_create_2008-04-10_11-57-03-AM.log file but the file is unable to open because it's looking for file emreposcre.sql which creates sysman user in this location /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
i feel while installing the database these files are not created....? or i need to run any scripts before running emca ....?
give me some inputs to this thread.
Thanks,
nil
STARTED EMCA at Apr 10, 2008 11:55:41 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXXXX
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 10, 2008 11:57:02 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollog
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 10, 2008 11:57:03 AM
mcidm11 10.2.0/bin>
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-10_11-57-03-AM.log
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
mcidm11 emca/SDM> pwd
/opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM
mcidm11 emca/SDM> more emca_repos_create_2008-04-10_11-57-03-AM.log
SP2-0310: unable to open file "/opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/emreposcre.sql"mcidm11 emca/SDM> cd
Directory: /opt/db
mcidm11 /opt/db> cd /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
Directory: /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql
mcidm11 emdrep/sql> ls
core db ias ocs -
Export and import Oracle 10G database
Hello all
Can anyone tell me once for all how can i backup oracle 10G database and restore it in other computer (export and import)
thanks alot
RonDo you can access to metalink?
If not, I copy an paste this doc's....
Doc ID: Note:10767.1
Subject: How to perform FULL System Export/Imports
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-APR-1994
Last Revision Date: 30-AUG-2002
Purpose
This article highlights some important points to consider when performing
a Full System Export and Import.
Scope and Application
It is intended to assist users performing FULL System Exports and Imports.
A Full System Export and Import is a useful way to replicate or clean up
a database. Please note the following guidelines when performing a Full
System Export and Import:
1. When performing the import, ensure you are pointing at the correct
instance. Always check values for the SID and two task driver before
proceeding.
*Note: On Unix systems, just entering a sub-shell, such as using
C-shell, can change the database that the import would work
against.
2. When possible, it is advisable to take a physical copy of the
exported database and the database you intend to import into before
starting the import. This ensures any mistakes are reversible.
3. NEVER run a FULL SYSTEM IMPORT on a machine that has more than one
database UNLESS you are 100% sure all tablespaces have been
pre-created. A full import will create any undefined tablespaces
using the same datafile names as the exported database. There are
situations where this is very dangerous:
-> If the datafiles belong to ANY other database, they will be
CORRUPTED. This is especially true if the exported database is
on the same machine, because its datafiles will be re-used by
the database you are importing into.
-> If the datafiles have names that clash with existing operating
system files.
4. When exporting, it is advisable to also produce a report showing
information you may need before / after the import:
-> List the tablespaces and datafiles
-> List the rollback segments
-> List a count, by user, of each object type such as tables,
indexes, etc.
This enables you to ensure that tablespaces have been pre-created
and to check the success of the import after it is complete.
5. If you are creating a completely new database from an export, remember
to create an extra rollback segment in SYSTEM, and make this available
in the init.ora file before proceeding with the import.
6. There are some versions of export that do not retain sequence numbers
correctly. It is advisable to select next_value for each sequence
after the export so that these can be checked after import.
Following these guidelines will help you to avoid major problems.
Doc ID: Note:174226.1
Subject: How To Copy an Oracle Database To Another Machine
Type: HOWTO
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 12-OCT-2001
Last Revision Date: 01-OCT-2003
goal: How to copy an Oracle database to another machine
fact: Oracle Server - Enterprise Edition
fix:
Pre-requisites: The copy is between 2 machines, both have to be on the same OS
and have to have exactly the same database version installed.
1. Make sure the database you want to copy was closed with a SHUTDOWN IMMEDIATE,
SHUTDOWN NORMAL or SHUTDOWN TRANSACTIONAL.
2. Copy init.ora and control files to create instance and be able to go in
mount mode. Check the init.ora for the locations where the controlfiles have
to be, if those locations are not valid on the machine put the control files on
different places and adjust the init.ora accordingly.
3.a. Copy the datafiles (all of them).
b. Copy the redo-logfiles (all of them).
4.a. (Unix only) Set the environment variables:
ORACLE_SID - set to the database name you wish to create
ORACLE_HOME - set to full pathname of the Oracle system home directory
PATH - needs to include $ORACLE_HOME/bin
b. (NT/2000 only) Do 'set ORACLE_SID=<SID>'
Use oradim to create the service for the instance. For more information
on oradim please refer to (the part that refers to creating a new instance):
Note:68720.1 Creating a new 7.3, 8.0, 8.1 Instance/Database
5. Use servermanager (check the name to use for your version of oracle) or
sqlplus (version 9i and above) to startup the database in mount mode.
Do
CONNECT INTERNAL/<PASSWORD>
then
STARTUP MOUNT
Then do a rename of the copied datafiles if they are not in the same path as on
the other machine. For all the files that are in the result of the query:
SELECT NAME FROM V$DATAFILE;
do
ALTER DATABASE RENAME FILE '<oldfullpath>\<filename>' to <
newfullpath>\<filename>';
6. Query the datadictionary for the old location of the redolog files using:
SELECT MEMBER FROM V$LOGFILE;
If the new place is not the same as the old do:
ALTER DATABASE RENAME FILE '<oldfullpath>\<redologfilename>' to &
lt;newfullpath>\<redologfilename>';
7. Now open the database:
ALTER DATBASE OPEN;
****************************************************************** -
Oracle 10g database homepage not working?
Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyI had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck -
"dbstart" error in oracle 10g database in LINUX
Hi,
i have oracle 10g database in LINUXwhen i give "dbstart" command under oracle database bin folder, i get following error
"Failed to auto-start Oracle Net Listene using /ade/vikrkuma_new/oracle/bin/tnslsnr"
how can i fix this error.
i want to make oracle listener, database and EM db console as auto start during system start up.
i think if this dbstart command is not working, then i am not sure how else can i make them autostart
how can i acheive this.
Thanks in Advance,
Philip.--- Posted: Oct 19, 2005 3:38 PM
lol, I believe he must have figured it out one way or another.
Maybe you are looking for
-
How and where can I write a subject matter in a reply I am doing,
How and where can I write a subject matter in a reply I am doing, I dont want the original subject matter and all I can see is the person to whom I am sending it and cc on the right?
-
Macro to colour tasks in team planner
Hi Everyone, I have experience of writing macros for excel and the general format for such things but I dont know where to strat in Project 2010. What Im trying to do is write a macro so that if the task name has "collect" in it, its red and if it ha
-
Hi Using SPD i am creating list workflow. Scenario: Employee submits a request . Task assign to manager. Manager can either approve/ reject. If approve then change the state column to "done". If rejected the state column to "Rejected". Problem is "A
-
How do i close a page that says hit close to continue and cancel to stay on the page?
-
Work order-System status table
Hi, In which table does the system status of the work order (TECO, Created, Released etc) gets updated? I want to know in which table does all the open work orders get updated. Thanks in Advance