Oracle 10g for linuxPowerPC fails to download

Using several different browsers,
the download of the image oracle10102.tgz
(569,664,835 bytes) failed.
Also the option "save target as" failed
with "Server returned and invalid, unrecognized response"

I think the user community can't help you, the only guess I have is address this issue to the OTN Members Services forum:
Downloads Issues

Similar Messages

Unable to download oracle 10g for vista

I'm trying to download Oracle 10g for Windows Vista, but I only get a zero-byte file.
I even tried Oracle 10g XE for Windows, but I get a zero byte file.
Also, when you try to download, it waits about a couple of minutes before saying completed.
Any ideas how to resolve this?.

Thanks for the replies.
It seemed to be a problem with either oracle's web site or a hop between oracle and my computer. It works now. I don't think it was my computer because I succussfully downloaded files from several other sites.
I have downloaded Oracle 10g for windows vista and installed it successfully on vista home premium 32-bit.
I did get a warning because I use DHCP. It recommended to install Microsoft Loopback driver as the primary interface - I didn't do that.
Oracle seems to run okay. I downloaded sql developer and it connects okay to oracle.
I have read other messages on here that installing oracle on a windows system using DHCP without a loopback driver can fail once my IP address changes. If I did install the microsoft loopback driver as my primary interface, what else would I need to do? Would installing this driver cause other stuff on my computer to fail?
Also, when I entered the database name for Oracle, it truncated a character.
I wasn't paying attention. So, after I installed, I was unable to connect at first because I kept entering the wrong TNS name. Is there a maximum TNS name length?
Notice the TNS name is TESTDB10 but the service name is TESTDB10G
TESTDB10 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.101)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = testdb10g)
)

Downloading the licensed verion of oracle 10g for solaris

Hi all,
Can any one tell me,
where can I donwload the licensed version of the Oracle 10g for solaaris. I already have licensed metalin kid ( valid support identifier) and also EULA agreement withe ORAcle,
Where can I get that download link.
Thanks all for your valuable cooperation.
Regards,
Surya

http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Cheers, OTN

How to reconfigure Oracle-xe (Oracle 10g for linux)?

Hello!
I found this article (seems useful since I use Mandriva 2010.2):
[http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912|http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912]
I installed Oracle 10g from the file "oracle-xe-univ-10.2.0.1-1.0.i386.rpm".
Then, when run ./oracle-xe start and then ./oracle-xe status I get:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-JUL-2011 23:39:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=%hostname%)(PORT=%port%)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
It does not seem ok to me.
I would love to truy to reconfigure it but if I try the command:
./oracle-xe configure
...I get:
Oracle Database 10g Express Edition is already configured
Does any body know how to reset and reconfigure Oracle 10g for Linux?
Best regards
Fredrik

it seems to be "PLSExtProc" bu default.Nope, the ORACLE_SID is taken from the environment variable when the database is started on a *nix host, windows its set up in the database service. If you want to change the ORACLE_SID, set it. See the environment setup script in OH/bin appropriate for your shell. (OH short for $ORACLE_HOME)
how to create a databaseYou mean tablespace?
what you think about this error message ... read from socketWhat do you think about the error message, its your database. Socket read error can be caused by many things, the ora-NNNN error number can provide some insight. http://download.oracle.com/docs/cd/E11882_01/server.112/e17766/toc.htm

Oracle 10g for Windows installation - Error 1067

Hello Folks
I am trying to install Oracle 10g for Windows on my WIndows 7 Ultimate OS. Everything went fine until I rebooted and tried to run the *SQL Plus. ALthough the Listener as well as the Oracle Servide shoudl automatically start, but for some reason..they didn't. As a result, I went into the Services and tried to manually run them but to my disappointment getting the folowing error:
Windows could not start the OracleServiceORADB1 service on local computer.
Error 1067: The process terminated unexpetedly.
Any idea what went wrong..and how should I get this right?
Thanks

Pl identify the exact version of "10g" that was installed.
The only version that is supported is 10.2.0.5 - see http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
Srini

Oracle 10g for Fedora Linux 3 with Kernel 2.6.9

Can any body suggest a link, from where I can download the Oracle database 10g for Fedora Core 3 Linux with Kernel version 2.6.9-1*.
I went through the oracle site site but i was not able to find a one for Fedora 3 instead i found for Fedora 4.
Thanks.......
Suneel

You will not find one exactly as you require.
As I suggested in the duplicate link
Oracle 10g for Fedora Linux 3 with Kernel 2.6.9 you need to take a version of Oracle that seems to close to your Linux and then carefully tinker to make it work.,

Need HELP :: Oracle 10g for Windows 7 Professional 64bit

I am trying to install Oracle 10g for my Laptop (Windows 7 64bit)and i am getting error message: ERROR Starting Database Control.
Here are last few lines from emconfig.log file ---
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
******** **** Certificate was added to keystore
Certificate reply was installed in keystore
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_NCI-01874908-L.nci.nih.gov_ORA10G\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">

<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />

<access-log path="../log/http-web-access.log"/>

<ssl-config needs-client-auth="false" keystore="C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_NCI-01874908-L.nci.nih.gov_ORA10G/config/server/keystore.test" keystore-password="FE7337F1A5D238357C9C6819AFC4F812" />
</web-site>
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleORA10G
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ORA10G\emConfig.log for more details.
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)

Pl identify which exact version of 10g is being installed.
Only 10.2.0.5 is supported/certified. The install steps are here - http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
MOS Doc 1222603.1 (Enterprise Manager Database Control Configuration - Recovering From Errors Due to CA Expiry on Oracle Database 10.2.0.4 or 10.2.0.5 [Video]) may be relevant
HTH
Srini

Oracle 10g for Developers

Hi , Trying to understand what are the features availabe in Oracle 10g for developers. Happy with links too.Thanks.

Go to Morgan's Library at www.psoug.org.
Click on any link.
Click on the link at page top named "Built-in Functions" for a warm up.

Add GNS and Configure Oracle Infrastructure for Cluster failed

hi
i tried to install Oracle Grid 11g on Oracle Linux EnterPrise edition but i got the following error while
creating the Root.sh files.
*Add GNS 192.168.138.131 -d nisha.......failed
*Configure Oracle Infrastructure for Cluster failed.
plz help me out thanks in advance...

hi
thanks for reply.
if i did not give GNS name then i cannot install it because without GNS i am not able to install
is there anyway to install without GNS?
and if i want to install Typically then its also asking for Scan name
so plz guide me what is scan name and how to configure?
@Levi Pereira
because without that i am not able to install the software plz if i am wrong then
help me out how to install without GNS?
Edited by: nisha on May 17, 2011 4:56 AM

Oracle 10g for Mac OS X

I was just reading the session list for Apple's WWDC this year at:
http://developer.apple.com/wwdc/descriptions/descriptions-eit.html
Understanding Oracle 10g for Mac OS X
Come to this session to learn about Oracle's latest grid-based relational database solution, Oracle 10g. Grid computing reduces the cost of IT by clustering servers together to function as a single large computer, shifting resources dynamically between applications. Attend this session if you are an in-house developer looking for a highly scalable and reliable database on Mac OS X Server.
Hopefully this means we will see 10g on our favorite platform sooner rather than later.

As I understand it from what I read somewhere here on Technet about month ago, there will be COMMERICIAL release of 10g on MacOSX.
Wouldn't that be just great? Run Oracle on a G5 X-Serve and OSX Panther instead of running it on some Wintel box with geeky Linux! I can hardly wait. This DBA will have his own G4 2x1 GHz ready!
FACT is : it will probably be a few more months but then again 10g has been released for other less mainstream platforms fairly quickly.
Cheers,
Jos Nijhoff

Download OracleAS 10g for Windows

I am not managing to do download of any software (OracleAS 10g, JDeveloper 10g)

in this article you can find instructions on where to download and how to installBut that is for linux,for window ocfs u have to search on metalink.

Cannot get ODBC data source to talk to Oracle 10g for Windows

Problem description
I recently installed Oracle 10g on my laptop computer, which is running Windows 7. Everything went smoothly except for one crucial item: The ODBC data source I added keeps returning this error when I click the "Test Connection" button:
Testing Connection
Unable to connect
[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed.
I was using the following ODBC driver
Oracle in OraDb10g_home1 (TNS Service Name = ORCL and User ID = scott)
This type of error happened, in one form or another for the three other Oracle drivers I have on my machine
Microsoft ODBC for Oracle
WinSQL Oracle
WinSQL Oracle Wire Protocol
These services are currently running (status = Started)
OractDBConsoleorcl
OracleMTSRecoveryService
OracleOraDb10g_home1iSQL*Plus
OracleOraDb10g_home1TNSListener
OracleServiceORCL
(NOTE: I entered the foregoing information by hand, since I was not able to copy-and-paste it. So be aware that there is a small possibility of a minor typo in case you plan to cut-and-paste it.)
If requested, I can provide the contents of these files
tnsnames.ora
sqlnet.ora
listener.ora
Other installations on the same computer
ODAC (ADO data provider for Oracle)
SQL Server 2009 Express
.NET 4
Visual Studio 2010
Any help would be greatly appreciated!

OK, I went ahead and upgraded to Windows 7 Professional and I STILL get the same error messages when trying to get the Oracle ODBC driver to talk to Oracle 10g. Here are some screen shots that show what happened:
1) Select ODBC driver: http://yfrog.com/f3driverselectionp
2) Configure driver: http://yfrog.com/ccoracleodbcfororaclep
3) Test connection: http://yfrog.com/1goracleodbcfororacletestp
I also get the following error when I try to run SQL*Plus from the line command, even with no parameters:
C:\Users\Bruce>sqlplus
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
Any suggestions as to how I might to go about diagnosing (and fixing) this problem?
Thanks,
Bruce

Oracle 10g XE recovery failed

Hi, everyone:
I have re-install my linux which is rh5. I also have a backup directory - "flash_recovery_area" from another oracle 10g XE database.
When I installed the new oracle 10 XE, I try to restore the backup data from application menu, but the get result as below:
This operation will shut down and restore the database. Are you sure [Y/N]?y
Restore in progress...
Enter the flash recovery area location:/usr/lib/oracle
==================== ERROR =========================
Restore of the database failed
==================== ERROR =========================
RMAN error: See log for details.
Log file is at /home/tim/oxe_restore.log.
Press ENTER key to exit
I found the error lines in oxe_restore.log as below:
RMAN>
Oracle instance started
Total System Global Area 285212672 bytes
Fixed Size 1258464 bytes
Variable Size 92277792 bytes
Database Buffers 188743680 bytes
Redo Buffers 2932736 bytes
RMAN>
Recovery Manager complete.
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Jul 29 01:05:53 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (not mounted)
RMAN>
echo set on
RMAN> restore spfile from autobackup db_recovery_file_dest='/usr/lib/oracle';
Starting restore at 29-JUL-08
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
recovery area destination: /usr/lib/oracle
database name (or database unique name) used for search: XE
channel ORA_DISK_1: no autobackups found in the recovery area
autobackup search outside recovery area not attempted because DBID was not set
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 07/29/2008 01:05:54
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
RMAN> startup force nomount;
Oracle instance started
Total System Global Area 608174080 bytes
Fixed Size 1260316 bytes
Variable Size 226493668 bytes
Database Buffers 377487360 bytes
Redo Buffers 2932736 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 29-JUL-08
allocated channel: ORA_DISK_1
And after that, the new oracle 10 XE can`t start anymore.
Thanks for any help!
OldTim

Thank you so much for reply!
Tried full path already, but still can`t work. But I found another solution below and made it working finally:
Oracle XE Recovery
1 Copy /usr/lib/oracle to Bakcup disk.
sudo cp /usr/lib/oracle /media/disk
2 Copy the directory oracle to new linux system
sudo cp /media/disk /usr/lib/oracle
3 install Oracle 10g XE
4 run command below:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/restore.sh
Done.

Oracle 10g RAC query fails

Hi,
I am a newbie to RAC implementations, I have a strange problem on the one we are testing,
Failure (forced shutdown) of one of the nodes results in queries on the other node returning with a ORA-12805. This happens only in certain cases, otherwise the query waits for some time and completes. We are using Redhat 3, Oracle 10g (10.2.0.1.0) and TAF with SELECT and PRECONNECT options. Is there some reason and remedy on why this fails on only one of the nodes ?.

Hi
From metalink
ORA-12805
=========
Error Summary
ORA 12805 parallel query server died unexpectedly (Oerr:ORA.12805)
Error Details
~~~~~~~~~~~~~
Error: ORA 12805
Text: parallel query server died unexpectedly
Cause: The PMON process is cleaning up the process because a parallel query
server terminated unexpectedly.
Action: Check for operating system errors and retry the statement.
If this problem persists, contact customer support.
When a ORA-12805 occurs in most cases you will also see another error, ORA-600 or
a ORA-7445.
Best thing for you to do is to check all logs (that may include alert, crs, css etc) and determine the cause of node crash.
Regards
Adnan

Oracle 10G JMS error : Failed to handle dispatch message ... exception ORABPEL-05002

Hi All,
We are using a JMS adapter as partner link in a BPEL process to produce messages to JMS Queue.
We are getting an error while producing a message to a JMS Queue.
The error comes for 1 or 2 instances among 5 to10 intsances. (all these instances ran with in 1 or 2 seconds).
We are using Oracle 10G SOA suite.
This error is getting in the Production environment.
The error is as follows (took error from server log).
Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection.
file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: oracle.j2ee.connector.proxy.ProxyInterceptException: javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback: null [Caused by: RollbackException: Transaction has been marked for rollback: null]
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
I tried the below JMS tunings with differnt combination, but no improvement.
            <property name="useJCAConnectionPool">true</property>
            <property name="maxSizeJCAConnectionPool">500</property>
            <property name="retryMaxCount">10</property>
            <property name="retryInterval">60</property>
Please let me know if any other logs or any other information is required.
Thanks,
Pershad

sorry, I forgot the below things which I tried to tune the JMS.
<property name="retryMaxCount">10</property>
<property name="retryInterval">60</property>
<property name="useJCAConnectionPool">true</property>
<property name="maxSizeJCAConnectionPool">500</property>
Thanks.

Oracle 10g for linuxPowerPC fails to download

Similar Messages

Maybe you are looking for