Oracle 10g install is not working on Global zone
We installed Solaris 10 (below) in a T2000 using the same standards we have for many other hosts.After the installation was finished, three zones were exported from a M5000 class machine and imported into this T2000. From inside the zones we can call the Oracle10g installer and the graphical screen is presented. When executing the installed from the Global zone, we can see a java process running, using 100% of a thread, but no graphical interface is presented at all. Checking truss, we see a lot of pollsys being called. Any ideas?
# uname -a
SunOS wgsst2k01 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T2000
# memconf -v
memconf: V2.6 06-May-2008 http://www.4schmidts.com/unix.html
hostname: wgsst2k01
banner: SPARC Enterprise T2000 (8-core quad-thread UltraSPARC-T1 1000MHz)
manufacturer: Sun Microsystems, Inc.
model: SPARC-Enterprise-T2000
Sun development codename: Ontario
Sun Family Part Number: SEB
Solaris 10 5/08 s10s_u5wos_10 SPARC, 64-bit kernel, SunOS 5.10
1 8-core quad-thread UltraSPARC-T1 1000MHz cpu, system freq: 200MHz
socket MB/CMP0/CH0/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
empty sockets: None
total memory = 16384MB (16GB)Cheers
Andreas
This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.
Similar Messages
-
Oracle 10g database homepage not working?
Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyI had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck -
Oracle Clinical - install.sh not working - says not found or Java runtime error.
install.sh not working - need help
Hi all,
OS Solaris 8. Sun Sparc 20 - 256 MB 9.1 GB. I am using csh for this install as instructed for the user OPAPPS.
I have installed Oracle 8.1.6 Rel 2 on the SUN Sparc. Everything is fine and a customised DB has been created. Now I
have to install an Oracle application on the same server. I have a working knowledge of Unix but I don't know scripting.
I logged in as OPAPPS as required. (.chsrc). I have set the path with all possible directories and made it a member of
group DBA as requested.
I put the CD in the CDROM and then cd /cdrom
# install.sh
BUT I get this message: install.sh not found.
install.sh is there on the CD. This is the contents of install.sh from the CD
#!/bin/sh
os=`uname | tr A-A a-z`
case "$os" in
sunos) platform=solaris
hp-ux) platform=hp-ux
osf1) platform=decunix
esac
#The environment variable $SRCHOME cannot be set during installation
unset SRCHOME
unset SHLIB_PATH
CMDDIR=`dirname $0`
if [ "CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relatove path with fully qualified path
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ] ; then
PATH=$PATH:/usr/bin: /bin
export PATH
else
PATH=/usr/bin:/bin
fi
cd $CMDDIR/$platform/Disk1/install/$platform
./runinstaller $*
directory structure on CD
-r-xr-xr-x 1 root sys 638 Aug 23 2000 install.sh
dr-xr-xr-x solaris
dr-xr-xr-x hpunix
dr-xr-xr-x decunix
dr-xr-xr-x nls732
solaris/disk1/install/solaris and the file
-r-xr-xr-x runinsta.
-r-xr-xr-x oraparm.ini
dr-xr-xr-x images
d .
d ..
Would anybody know why I get install.sh NOT found when it is there?. This executabel is on the CD. I am not sure why it gives
a java runtime error message when it is OK. Remember, I have already installed Oracle 8i using the same environment with the existing java runtime .
Thanks for your help.Hi,
I am installing Oracle clinical 4.5.x.
I need to know whether both the Database server and application server for Oracle Clinical can be installed on same server(windows 2000 server).
Both of them are installed on windows platform.
It seems that u have tried the single node installation.
So,please give all the possible details regarding the single node installation for oracle clinical no matter what platform it is.
Please reply me as soon as possible, its urgent.
Thanking u in advance. -
Oracle 10g Agent is not working in Windows VISTA
Hi
I have installed Oracle 10g Grid Control in VISTA. But the Agent is not getting started.
the trc in the Agent10 G log directory is
2008-04-19 17:29:45 Thread-532 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 17:29:45 Thread-532 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:22 Thread-5288 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:22 Thread-5288 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:23 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:24 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:26 Thread-7272 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:26 Thread-7272 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:52 Thread-4872 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:52 Thread-4872 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:53 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:54 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:55 Thread-5604 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:55 Thread-5604 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP. -
Oracle 10g EM is not working properly
Hi all!
I just installed a new database of Oracle 10g (10.1.0.2) and applied patchset (10.1.0.4). After all I started the OEM using emctl start dbconsole, it starts alright and I'm able to login on the database using the SYS as SYSDBA user. When it goes to the main page that should show the status, alerts, etc about the database I receive an error that the database is not started. If I click start, gives me an error:
oracle@xseries:~> emctl start dbconsole
TZ set to Brazil/West
Oracle Enterprise Manager 10g Database Control Release 10.1.0.4
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://xseries.avconline.com.br:5505/em/console/aboutApplication
Agent Version : 10.1.0.4.0
OMS Version : 10.1.0.4.0
Protocol Version : 10.1.0.2.0
Agent Home : /opt/oracle/product/10.1.0/xseries.avconline.com.br_nlprod
Agent binaries : /opt/oracle/product/10.1.0
Agent Process ID : 15398
Parent Process ID : 15393
Agent URL : http://xseries.avconline.com.br:5505/emd/main
Started at : 2005-04-16 10:52:49
Started by user : oracle
Last Reload : 2005-04-16 10:52:49
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 15
Size of XML files pending upload(MB) : 4.48
Available disk space on upload filesystem : 51.94%
Agent is already started. Will restart the agent
Stopping agent ... stopped.
Starting Oracle Enterprise Manager 10g Database Control ....... started.
Logs are generated in directory /opt/oracle/product/10.1.0/xseries.avconline.com.br_nlprod/sysman/log
But the entreprise manager shows the screen to give the credentials to connect on the database. But when I put the user/pass for the OS System and Database I receive the following message:
Premature EOF encountered, no trailer found
And also I have found that in a few minutes the service of dbconsole shuts down by itself, and I have to do emctl start dbconsole again.
Does anyone knows what is going on ?
Thanks!
Eduardotry the below
emca -config dbcontrol db -repos recreate -
Oracle 10g RMAN is not working in RHEL 4 after fresh installation
I downloaded Oracle 10g R2 from OTN at home for self study.
I have problem with the RMAN after fresh installation Oracle 10g in RedHat Enterprise Linux AS 4. (x86)
Everything seems works fine, database mounted including EM, SQLPlus, iSQLPlus etc.
But when I attempt to execute RMAN command on the terminal, nothing is happening. No RMAN prompt, No error message!
I ran the "relink all" command but no helps.
Please advice.
Edited by: Surf888 on Nov 16, 2008 9:51 AMI guess you are a common Linux 'victim', you don't invoke Oracle's rman, but a Linux executable:
http://linux.about.com/cs/linux101/g/rman.htm
Check your PATH variable, you may move $ORACLE_HOME/bin to the top.
Werner -
Oracle 10gr2 locally is not working after installing Oracle 11g
hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime processGenerally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH
-
Running Oracle 9i client code against an Oracle 10g install on PC
On Unix I am able to run Oracle 9i client code against an Oracle 10g install by setting ORACLE_HOME to the Oracle 10g install location and then creating a symbolic link (example: ln -fs libclntsh.so.10.1 libclntsh.so.9.0).
On PC (in particular XP SP2) I want to do something similar without using "junctions" or "junction points". Is there a way to set an environment variable or ini file to have my 9i client code point to the right libraries? I keep getting an error saying that my client code will not run due to "orasql9.dll" not being found. The "orasql10.dll" is installed on my machine.
Any assistance would be appreciated.You might want to check metalink doc,
Client / Server / Interoperability Support Between Different Oracle Versions
Doc ID: Note:207303.1
Even your application built on 9i, doesn't mean it will not work with 10g database. From what I can see, running 9i executable under 10g installation to create mixed blood breed will do more harm than good. Not only it's not supported but also the outcome is unpredictable. -
How to check oracle properly installed or not?
Hello Friends,
How to check oracle properly installed or not. cause during installation time the person who installed faced many problems. we have RISK base IBM p5 Series server and Oracle 10g RAC.
i want to check installation made properly or not.
Thanks,
Nikunj PatelInstallation for RAC environments means you are not only talking about one single installation, but several installations, and the number of installations and checking processes depend on factors such as the clusterware you are using, if you are using the Oracle clusterware or the proprietary clusterware, if you are using a separate oracle home to install the ASM or if you are using the same oracle home for both, the ASM and the RDBMS.
First you must ensure you have installed all prerequisites according to your platform, i.e. patches, packages, kernel parameters, etc. which are listed at the install guide corresponding to your platform. Then you should use the cluvfy (cluster verifier tool) to check if the different install phases are properly installed
The most critical and most of the times, problematic installation phase is the clusterware. So you should specify if you installed the Oracle clusterware or the proprietary clusterware. In a RAC environment if your clusterware is not properly installed, most probably you won't have a running RAC, so if your environment is functional there you may have high probabilities that it is OK, but to make sure, launch the cluvfy tool.
The cluvfy tool verifies the process since the beginning and it ensures your environment meets the required minimum requirements to be at an operational level, it checks the pre/post install phases for the clusterware, pre/post install of the rdbms, and it is launched from the OS. It can be obtained as a standalone product or you can use the one found at the clusterware Oracle Home. For further references on this tool I suggest you to read this
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for AIX
Part Number B14201-04
~ Madrid -
Oracle date parameter query not working?
http://stackoverflow.com/questions/14539489/oracle-date-parameter-query-not-working
Trying to run the below query, but always fails even though the parameter values matches. I'm thinking there is a precision issue for :xRowVersion_prev parameter. I want too keep as much precision as possible.
Delete
from CONCURRENCYTESTITEMS
where ITEMID = :xItemId
and ROWVERSION = :xRowVersion_prev
The Oracle Rowversion is a TimestampLTZ and so is the oracle parameter type.
The same code & query works in Sql Server, but not Oracle.
Public Function CreateConnection() As IDbConnection
Dim sl As New SettingsLoader
Dim cs As String = sl.ObtainConnectionString
Dim cn As OracleConnection = New OracleConnection(cs)
cn.Open()
Return cn
End Function
Public Function CreateCommand(connection As IDbConnection) As IDbCommand
Dim cmd As OracleCommand = DirectCast(connection.CreateCommand, OracleCommand)
cmd.BindByName = True
Return cmd
End Function
<TestMethod()>
<TestCategory("Oracle")> _
Public Sub Test_POC_Delete()
Dim connection As IDbConnection = CreateConnection()
Dim rowver As DateTime = DateTime.Now
Dim id As Decimal
Using cmd As IDbCommand = CreateCommand(connection)
cmd.CommandText = "insert into CONCURRENCYTESTITEMS values(SEQ_CONCURRENCYTESTITEMS.nextval,'bla bla bla',:xRowVersion) returning ITEMID into :myOutputParameter"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.ReturnValue
p.DbType = DbType.Decimal
p.ParameterName = "myOutputParameter"
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion"
v.Value = rowver
cmd.Parameters.Add(v)
cmd.ExecuteNonQuery()
id = CType(p.Value, Decimal)
End Using
Using cmd As IDbCommand = m_DBTypesFactory.CreateCommand(connection)
cmd.CommandText = " Delete from CONCURRENCYTESTITEMS where ITEMID = :xItemId and ROWVERSION = :xRowVersion_prev"
Dim p As OracleParameter = New OracleParameter
p.Direction = ParameterDirection.Input
p.DbType = DbType.Decimal
p.ParameterName = "xItemId"
p.Value = id
cmd.Parameters.Add(p)
Dim v As OracleParameter = New OracleParameter
v.Direction = ParameterDirection.Input
v.OracleDbType = OracleDbType.TimeStampLTZ
v.ParameterName = "xRowVersion_prev"
v.Value = rowver
v.Precision = 6 '????
cmd.Parameters.Add(v)
Dim cnt As Integer = cmd.ExecuteNonQuery()
If cnt = 0 Then Assert.Fail() 'should delete
End Using
connection.Close()
End Sub
Schema:
-- ****** Object: Table SYSTEM.CONCURRENCYTESTITEMS Script Date: 1/26/2013 11:56:50 AM ******
CREATE TABLE "CONCURRENCYTESTITEMS" (
"ITEMID" NUMBER(19,0) NOT NULL,
"NOTES" NCHAR(200) NOT NULL,
"ROWVERSION" TIMESTAMP(6) WITH LOCAL TIME ZONE NOT NULL)
STORAGE (
NEXT 1048576 )
Sequence:
-- ****** Object: Sequence SYSTEM.SEQ_CONCURRENCYTESTITEMS Script Date: 1/26/2013 12:12:48 PM ******
CREATE SEQUENCE "SEQ_CONCURRENCYTESTITEMS"
START WITH 1
CACHE 20
MAXVALUE 9999999999999999999999999999still not comming...
i have one table each entry is having only one fromdata and one todate only
i am running below in sql it is showing two rows. ok.
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
on t0.DocEntry = t1.DocEntry
inner join ohem t2
on t2.empID = t0.U_empid where t0.U_empid between '830' and '850' and t1.U_frmdate ='20160801' and t1.u_todate='20160830'
in commond promt
select t1.U_frmdate,t1.U_todate ,ISNULL(t2.firstName,'')+ ',' +ISNULL(t2.middleName ,'')+','+ISNULL(t2.lastName,'') AS NAME, T2.empID AS EMPID, T2.U_emp AS Empticket,t2.U_PFAcc,t0.U_pf
from [@PR_PRCSAL1] t0 inner join [@PR_OPRCSAL] t1
on t0.DocEntry = t1.DocEntry
inner join ohem t2
on t2.empID = t0.U_empid where t0.U_empid between {?FromEmid} and {?ToEmid} and t1.U_frmdate ={?FDate} and t1.u_todate={?TDate}
still not showing any results.. -
How to find XI server has oracle driver installed or not ?
Dear all,
Please provide me steps to find if XI server is having oracle driver installed or not for JDBC activities.
Thanks
GauarvHI Gaurav,
Follow the steps:
Go to Visual admin:
1) chose table cluster->server->libraries->com.sap.aii.af.jmsproviderlib
2) Check in window jar container,if JMS/JDBC libraries are uploaded correctly
3) Look ar jars contained
3) look at \usr\sap\<sysID>\JCOO\j2ee\cluster\server-\bin
Also check the deployment in Visual Admin
1) choose tab cluster->server->service->classloader viewer
2_ Look tab in runtime component-> libraries-> com.sap.aii.af.jmsproviderlib for JDBC/JMS lib.
Thnx
Chirag Gohil -
Oracle 10G installed Enterprise manager not working
Hi Guys
I have installed oracle 10g on my laptop having enterprise linux 4(on VM Ware) . All the things are working fine when i use database using sqlplus, but i am not able to start enterprise manager. the first time i started the database i was able to start enterprise manager.
please help.....Yes when i start dbconsole i get a url i click on that the mozilla opens but ... i get message page cannot be displayed..
-
Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)
Hi everyone,
I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
Thanksduplicate
Re: Oracle Forms 10G not working as Oracle Forms 6i -
Oracle 10g install dbca always in Chinese and not English language
I installed/re-installed Oracle 10g several times including removing registry entries, C:\Oracle directory, C:\Program Files\Oracle and empty c:\temp folders,
set my windows xp languages to English (Can) and u.s. only
The dbca always comes up in Chinese language and not in English no matter what I did. Is there a simple way to reset dbca to english without reinstalling Oracle 10g even though I really want to know why and how it picks up Chinese language as default ?I searched for "chinese" in oracle folder and found it in my install log where based on registry settings, it took my default language as Chinese.
I searched google, nothing until I came across how to set languages in xp.
To solve this annoying problem on xp:
Go to settings/control Panel/Regional and Language options/
under language tab, make sure both Thai and East Asian languages boxes are unchecked
under advanced tab, select language version non-unicode programs, pick English (Canada) drop down, I had Hong Kong SAR before. Clicked apply and come back in again to ensure no code page version tables for Asian languages are checked on this Advanced tab. Restart computer and that's it ! -
How to know whether my oracle 10g instalation in unicode supported or not
Hi
i am new to oracle. I have installed Oracle 10g client and server.
I want to know whether the database created can store unicode data/arabic data.
Please guide me how can i find whether unicode support is on for my db or not.
The outputs of some of the queries run by me are as follows:
SQL> HOST ECHO $NLS_LANG;
$NLS_LANG
SQL> HOST ECHO %NLS_LANG%;
%NLS_LANG%
SQL> @.[%NLS_LANG%];
SP2-0310: unable to open file ".[AMERICAN_AMERICA.WE8MSWIN1252]"
SQL> select cust_eng_name,cust_arb_name from custmast;
select cust_eng_name,cust_arb_name from custmast
ERROR at line 1:
ORA-00942: table or view does not exist
Please reply me asap.user10817093 wrote:
1. Yeh that is the thing I want. What are the other steps that i need to do with my Oracle Client/Server for unicode support.
Where i am getting trouble is the Oracle Client/Server unicode support.
And how to decide what character set will suite me best.1. If your application is going to be a "true" Unicode application, you can set the NLS_LANG registry/environment setting on your clients to ".UTF8" to enable true Unicode support.
2. Your database needs to support Unicode, too.
The recommended database character set for this in 10g is "AL32UTF8".
If you currently have a single-byte database character set (WE8MSWIN1252), you need to decide how to get this done.
If you can simply create a new database using the "AL32UTF8" character set, this would be the easiest way.
There are several documents available (e.g. on Oracle MetaLink) that describe in detail how to convert the character set of an existing database. Depending on your data this can be a tedious task involving several steps, so may be creating a new database and exporting/importing the data might be the simplest choice if you need to migrate some existing data.
The recommended national character set is "AL16UTF16", by the way, but that shouldn't matter that much once you have a Unicode enabled database using "AL32UTF8" as database character set.
2. How to set/retrive the "Database Character Set" and "National Character Set". This has already been answered partly. Retrieve:
Database Character Set:
SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET';National Character Set:
SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_NCHAR_CHARACTERSET';In most of the cases you can't just simply set/alter the character sets, as outlined above.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/
Maybe you are looking for
-
Problem with sound capture on a Packard Bell
Hello, recently I have acquired a Packard Bell EASYNOTE MX61-B-054PT notebook to replace my dead Asus. Everything is working quite well except for sound capture from the microphone. There is a periodic noise that I can't get rid of (the noise I'm tal
-
How do you try out an application and keep $HOME clean afterwards
As a new Gnome user, naturally I turned to evolution for an email client well integrated with Gnome. As it turned out, I couldn't find any love for it, so I removed the package. But the problem was that it left behind in several places stuff I no lon
-
Separating songs on the same album into different sections of the ipod
i dont know what is wrong. but sometimes when i add songs onto my ipod, it'll separate the songs. for example, if i have a 13 track cd and download in onto my ipod, it'll put tracks 1-7 separate from the rest. im so confused and i dont know whats wro
-
Oracle 10gR2 installation on Linux
Hi, I have installed Oracle 10gR2 on Fedora 11 in my laptop for personal use and it is working fine.Now i have created another user oradev and i want to control the database form oradev user.When i am issuing the command sqlplus/proc for development
-
I have a region based on a URL, but it does not work with https! It looks like a limitation of SYS.UTL_HTTP or am I missing something. I can get around it by using an iframe, so what is the benefit of SYS.UTL_HTTP? Cheers Simon