Oracle 10g Installation issue on Windows 7

Hi,
I tried to install Oracle 10g downloaded from the below link on my laptop which runs in Windows 7.
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
The Oracle version is 10g release 2 for windows 7. I got this DB version no. for Windows 7 from this forum only. But still, I got the error message stated below and unable to install 10g.
------------------------------------------------------ Error --------------------------------------------------------------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2010-10-22_07-37-48AM.log
Please press Enter to exit...
------------------------------------------------------ Error End -------------------------------------------------------------------
Could you please let me know how I can fix this issue? Or is there any other oracle 10g release/patch to fix this issue? I need to install only Oracle 10g and not 11g.
Also, I need to install Oracle Forms 10g too.
It would be great if you could guide me on installing these two softwares in my laptop.
Your help will be very much appreciated.
Thanks,
Arun
Edited by: 804404 on Oct 22, 2010 7:52 AM

Welcome to the forums !
This issue has been discussed many times before. Pl use the search feature. The only versions supported in Win 7 (Professional or higher) are 10.2.0.5 and 11gR2. 10.2.0.5 is only available on My Oracle Support, while 11gR2 can be downloaded for free from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Re: Oracle for Windows 7
Re: which version of oracle works on windows 7
HTH
Srini

Similar Messages

  • Forms 10g Installation issue on windows 7 Professional service pack 1

    hi
    I am trying to install oracle forms 10g  64 bit windows 7 Professional service pack 1 ..
    Below are 2 files that i am using ..
    ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    But it failed but the error is .. 
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.    Actual 6.1     Failed <<<<
    just wondering if there are any workaround ..

    Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7.  You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified.  You must have a My Oracle Support account to obtain the patch.
    Now, to your question - is there a workaround; the answer is yes.  There are known issues with this installer.  I'll list them and their workaround.
    1.  The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
    Workaround:  Right-click the Installer and select Properties.  Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for:  Windows XP SP3).
    2.  The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
    Workaround:  You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes.  See this Microsoft article for more information on changing VM settings.  http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
    This change will require you to restart your computer.  After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
    3.  The Oracle installer MUST be installed as an "Administrator". 
    Workaround:  Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab.  Click the "Run this program as an administrator" checkbox.
    4.  Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
    Run the Oracle installer and it should now install succesfully.
    Craig...

  • Oracle 10g Installation Error on Windows 2008 server

    Hi Experts,
    I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
    Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
    Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
    Can you please suggest how to handle this error and start the service?
    Regards,
    Naresh.

    Hi All,
    Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
    I was under the impression that the service has to be started before going for SAP installation.
    Thanks all for your replies.
    Regards,
    Naresh.

  • Oracle 10g Installation issue

    While Installing Oracle 10g, I get the following warning
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
    Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    ========================================================
    When I ignored this warning and proceeded with the installation tnsnames.ora was not getting created.
    Please help on this.

    Hi,
    You need to configure the Loop Back Adapter on your system, Since ORACLE does not support the dynamic IP Address. Do the Loop Adapater the Problem will be solved.
    Refer :-
    http://youngcow.net/doc/oracle10g/install.102/b14316/reqs.htm#BABGCEAI
    Check for "Installing a Loopback Adapter"
    - Pavan Kumar N

  • Oracle 11g installation issue on windows 2008 -64 bit

    I have downloaded the Oracle DB Server software from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111070-win64-2008soft-084715.html:
    Oracle Database 11g Release 1 (11.1.0.7.0)
    for Microsoft Windows Server 2008 x64
    win64_11gR1_database_111070.zip (2,014,141,880 bytes)
    The installer always fails with the following:
    Checking operating system requirements ...
    Expected result: One of 5.0,5.1,5.2,6.0
    Actual Result: 6.1
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Oracle Database 11g is not certified on the current operating system.
    Recommendation: Make sure you are installing the software on the correct platform.
    ========================================================
    Checking service pack requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
    I am using Windows 2008R2 -64 bit and not Windows Vista. Any idea?

    Hi;
    Oracle Certified versions for 2008R2:
    Oracle 11.2.0.x
    Oracle 10.2.0.5 (See Note 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
    For Oracle 11gR1:
    For MS Windows 2008, you can select either:
    (11.1.0.7.0)
    Microsoft Windows Server 2008 (32-bit) (1.9 GB)
    Microsoft Windows Server 2008 x64 (1.9 GB)
    For details see:
    Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1? [ID 740926.1]
    Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    Regard
    Helios

  • Oracle 10g installation on Windows 7

    I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
    is it possible ??
    thanks,
    JJ

    Possible yes? Brilliant no!
    Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
    Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops.

  • Oracle Application Server 10g Installation Guide for Windows

    The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
    How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

    Hi,
    The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
    Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
    The Docs are located under the Documentation tab.
    Alternatively, here is the direct link to the Documentation Tab interface of the Library:
    http://download.oracle.com/docs/cd/B10468_04/docs.htm
    Regards,
    Les

  • SUNWsprox package with solaris 10 for Oracle 10g Installation....

    Hi
    I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
    Thanks
    Mohammed Tanvir

    Hi...
    I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
    The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
    Roger

  • Uninstalling oracle 10g enterprise edition from windows vista

    HI There,
    I want to uninstall oracle 10g enterprise edition from windows vista home premium edition. I have uninstalled it using oracle universal installer and then deleted folder from program files. But I am unable to delete the main folder i.e. D>Oracle..
    It is displaying error message 'access denied' Please suggest me on this issue.. How can I delete that one so that I can instal it again. I would be really grateful.
    kind regards

    Can someone help me on this issue.. That would be great...

  • OracleAS 10g installation (please Help)

    Hi All
    i want a help in[b] OracleAS 10g installation
    in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
    this Errors & messages in 4 pictures to see it .. hope to find a solution for this
    th pictures in this links
    1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
    2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
    3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
    4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
    after pressing ignor in the forth screen many errors & messages appears to me

    Oracle AS10g = 10.1.2.0.2 I presume...
    However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
    I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
    Please check these two Metalink Notes:
    295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
    365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
    Regards,
    Martin

  • Migration from Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 Server

    I am working on migrating Oracle 9i 32 bit to Oracle 10G 64 bit on Windows 2003 from Old server to new server. We have db around 500 GB and 3 schemas. I installed Oracle 10G on new server, created tablespaces, schema's blah blah and now doing export and import at schema level from old server to new server.
    Import is taking more than 4 to 5 hours on new server. My manager is saying, window time is bit longer and he wants me to try possiblities to make this process faster. Can some one help me on this, to use the best possible method to complete this process faster?
    Will below step work, if I try?
    If I install, oracle 9i and 10g both on new server in different home directories and take the hot backup from old machine and restore on new machine in 9i home directory and use the upgrade configuration assistant from 10g and do the upgrade? Pls advice.
    Thanks in advance,
    Hari babu
    Edited by: user6367891 on Mar 2, 2010 5:28 AM

    It looks good.
    I have one question in below steps:
    To migrate an Oracle9i or older database to an Oracle Database 10g Release 1 (10.1) database for 64-bit Windows:
    1 Perform steps 1 - 11 in "Migrating an Oracle Database 10g Release 1 (10.1) Database".
    2 Shut down the database on the 64-bit computer:
    SQL> SHUTDOWN IMMEDIATE;
    3 Start the database migration:
    SQL> STARTUP MIGRATE;
    4 Migrate the database as described in Chapter 3, "Upgrading a Database to the New Oracle Database 10g Release" in Oracle Database Upgrade Guide.
    In step 4, it says, migrate database as described in chapter 3. In chapter 3, it says, to do the upgrade the process using dbca or manually. Pls confirm whether do the upgrade process after issuing startup migrate or not.
    Thanks in advance.

  • Oracle 10g Installation Problem on SUSE Linux 10

    Hello Friends,
    I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
    But, while starting the Installation i am getting following Errors.
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
    asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
    Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
    writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    I have checked the Permissions and the Size of /tmp Directory, which is as followed:
    drwxr-xr-x  11 root root    0 2009-04-22 21:19 sys
    drwxrwxrwt  52 root root 1824 2009-04-22 16:00 tmp
    drwxr-xr-x  15 root root  408 2009-04-19 14:43 usr
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/sda10             2104376     73112   2031264   4% /tmp
    I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
    The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
    drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
    drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
    drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
    The Oracle Installation log is as follwoed:
    Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    The commandline for unzip:
    /home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
    /1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
    I have set DISPLAY variable in this way before starting Installation:
    DISPLAY=$HOSTNAME:0.0
    export DISPLAY
    I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
    I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
    Please, help me for this issue.
    Thanks & Regards,
    Bhavik G. Shroff

    Hi Markus,
    How are you ?
    Thank you very much for your reply.
    I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
    Preparing response files. Please wait:
    ======================================
    Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
    /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
    Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
    this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    SHROFF:~ # cd /home/orasm7/tmpora/
    SHROFF:/home/orasm7/tmpora # ll
    total 0
    drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
    SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
    SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
    total 4
    drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
    -rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
    SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
    I have a doubt on tmp_netca_file & tmp_dbca_file variable.
    Please give your suggestion for the same.
    Regards,
    Bhavik G. Shroff
    Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

  • Oracle 10g installation questions

    Hi,
    I tried to install Oracle 10g (Enterprise Edition) on Windows 2000 server, and encountered the following error when I used the Database Upgrade Assistance to ugrade one of my existing Oracle 8 database TEST.
    ORA-01658: Unable to create INITIAL extent for segment in tablespace USERS.
    I searched the forum, and seems that there is not enough space for my USERS tablespace. Is it the right solution?
    If I clicked Ignore for the above erro, another error appeared:
    ORA-00942: table or view does not exist.
    I don't have table or view in TEST database, it is just a database instance created by Oracle 8. Do I have to create tables or views in order to upgrade it to Oracle 10g database?
    I tried to upgrade an existing Oracle 8 database TEST1 which has data in it, and got the following error:
    ORA-01119: error in creating database file D:\oracle\oradata\test1\sysaux01.dbf.
    ORA-27044: unable to write the header block of file.
    One last question is that after the failing of the DBUCA, I was told that the 10g was successfully installed on my server while no orcl database was created even if I chose
    to create a database orcl during my installation.
    The following are services running for 10g after the installation.
    OracleCSService Started
    OracleOraDb10g_home1iSQL*Plus Started
    OracleOraDb10g_home1SNMPPeerEncapsulator
    OracleOraDb10g_home1SNMPPeerMasterAgent
    OracleOraDb10g_home1TNSListenerLISTENER10 Started
    Anybody has any idea what went wrong?
    Your early reply is greatly appreciated.
    Jane

    I believe the answers are:
    1. the Oracle client needs to be the same bits as the TimesTen server. i.e. if you have 64b TimesTen, then you will need 64b Oracle client. If you have 32b TimesTen then you will need 32b Oracle client.
    2. Yes. I believe you can install 64b TimesTen with 64b Oracle client and connect this to a 32b Oracle server. I dont have any idea about performance overhead of this configuration.

  • Error on clone database, oracle 10g release 2 for windows server 2008

    Hi,
    OS: Windows Server 2008 X64
    Oracle: oracle 10g release r2 for windows server 2008
    An error occurred when creating a database, stop at last step, Screenshot:
    [http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
    the trace log content:
    [main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
    [main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
    [main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
    [main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
    [main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
    [main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
    [main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
    [main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\oracle\product\10.2.0\db_1\bin
    [main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
    [main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
    [main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
    [main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
    [main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
    [main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
    [main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
    [main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
    [main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
    [main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
    [main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
    [main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
    [main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
    [main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
    [main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
    [main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
    [main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
    [main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
    [main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
    [Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
    [Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
    [Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
    [Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
    [Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
    [Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
    [Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

    Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
    ORA-28547 : Connection to server failed, probable Net8 admin error
    thanks
    http://swervedba.wordpress.com/

  • Can't uninstall or reinstall oracle 10g express edition in windows server 2

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

Maybe you are looking for

  • How can I search for files on an external file server (using Linux)?

    The configuration is that the mac min is connected (with other Windows XP computers) in an ethernet network. The file server is the only one running Linux. The mini mac has no problems to connect to the server and read the files, write files and crea

  • Calibrating dual displays

    i recently was able to hook up a second display (for testing) to my power mac G4. i loved it and i now want to get a 2nd 20" cinema display. my question is when i calibrated my original display (using a pantone spyder) it created a profile for the di

  • Having Difficulties with the Paste Board Server (PBS)

    Hello! I have having difficulty with the paste board server with extensive use of QuicKeys v3.1.1. I have a repetitive process that draws data from FileMaker Pro 8.0v3 to populate variables in QucKeys via the clipboard. The data is then used by QuicK

  • Itune error code 3 come  at the end of restoring process

    help!! my iphone 5 is stuck in recovery mode and when I try to restore it,my iphone start restoring (ios7.1)but in middle of restoring I get itune error code 3,so pls help and the error come  at the end of restoring process

  • Deleting or checking in a lost open activity (DTR)

    Hello everybody: A teammate delete a file which is in the DTR. He created an activity and linked this file change into that activity. His computer crash and was necessary to format harddisk before he could check-in the activity. Now we need to work o