Oracle 10g installation problem on redHat
Dear pals,
Hi, I got an error while installing the 10g into my redhat machine. My redhat should be supported, but not know what is happened...
./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /ora/oraInventory/logs/installActions2004-03-31_11-39-25AM.log
The error log show the same thing thus nothing can help.
My Redhat version is:
Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
Is there anyone can help? Thank you very much in advance.
Regards,
Eddie
Werner Puschitz has a good home page (sorry, I forgot the link) on that:
su - root
cp /etc/redhat-release /etc/redhat-release.backup
cat > /etc/redhat-release << EOF
Red Hat Enterprise Linux AS release 3 (Taroon)
EOF
It works for me on RH9.0. Change redhat-release.backup to
redhat-release after you are done with your installation.
Similar Messages
-
OracleAS 10g Installation Problem on RedHat AS 3.0
Hi
I need to install OracleAS 10g on RedHat AS 3.0 and it seems that I need a patch (Patch 3006854) and the installation is impossible without it.I just started using oracleAS 10g and I dont have any metalink id.
I think something is wrong here.
a free trial version with a commercial patch !!!
can any one please help me out.
regards yashardear fredrik
I tried to install it according to the installation guid on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnRedHatAS3.php as you see it asked for installation of a patch.
and yes I tried to install it without installing this patch and I got an error saying that I am missing a file named ld.so in /etc.I thought it might be connected to that patch.
beside when I was looking for the solution to my problem I saw many people having the same problem and asking the exact same question.
please notify about any solution that you think might help me solving this problem. I am in a hurry
regards yashar -
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Oracle 10g installation problem on RHEL4
hi,
I am installing oracle 10g on red hat linux. I read the complete documentation and the mailing lists and have installed all the required RPMs.
When I start install, I get the following three errors:
error in invoking target 'install' of makefile
'u/01/app/oracle/ctx/lib/ins_ctx.mk'.
error in invoking target 'agent nmo nmb' of makefile
'u/01/app/oracle/ctx/lib/ins_sysman.mk'.
error in invoking target 'all_no_orcl' of makefile
'u/01/app/oracle/ctx/lib/ins_rdbms.mk'.
This error is popped up when the link part is going on. I am installing the standard edition and have done all the possible things mentioned in the documentation.
Can someone pls help me understand where is the problem
thanx in advance,
jayeshi had the same sequence of errors on installing (10g on Redhat AS4)
The first error (INFO: /usr/bin/ld: crt1.o: No such file: No such file or directory
) is solved by installing the following package (you need the glibc-devel i386 package installed as well as the x86_64 version)
up2date --arch=i386 glibc-devel
The second error, I am currently stuck at (error in invoking target agent nmo nmb...of makefile ins_sysman.mk)
INFO: /app/oracle/oracle/product/10.2.0/db_1/lib32//libnls10.a(lmsagb.o)(.text+0xa3): In function `lmsagbcmt':
: undefined reference to `SltsPrRead'
/app/oracle/oracle/product/10.2.0/db_1/lib32//libnls10.a(lmsagb.o)(.text+0x10a):
Any ideas, people, please?
Cheerio,
Nic -
Oracle 10g Installation Problem in HP-UX 11.31
Hi
I am installing ERP 2005 SR2 on HP-UX 11.31 OS with ORACLE database. When I am running ./RUNINSTALLER getting following error. Error Log as follows
Using paramFile: /oracle/stage/102_64/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be B.11.23. Actual B.11.31
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2008-07-16_11-26-39AM/installActions2008-07-16_11-26-39AM.log
When I look into oraparam.ini file from given path found entries as follows
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Linux=redhat-2.1AS
HPUX=B.11.23
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[HPUX-B.11.23-required]
#PATCHES required by JRE and Product, /usr/sbin/swlist -l patch gets list of patches on system
PATCHES=
#PACKAGES required by JRE and Product, /usr/sbin/swlist -l product gets list of packages on system
PACKAGES=
#Patch bundles required for Oracle.
#/usr/sbin/swlist -l bundle gives list of bundles.
#Each item should follow the format "bundle:version"
#ex.,GOLDBASE11i:B.11.11.0106.9,GOLDAPPS11i:B.11.11.0106.9
BUNDLE=
#Minimum swap space required by OUI, Increase it if your product installation so requires
SWAP_SPACE=250
TEMP_SPACE=250
BUNDLE_FAILURE_MESSAGE=Some patch bundles were not found on the system. Please verify if the system is at a higher bundle level.
Please let me know how to overcome this problem.
Regards
JayakarHi ,
If anyone come across this kind of errors don't try to perform any workaround which is not recommended by sap as later in post installation steps there will be errors so please go through below SAP note as it has some workarounds recommends by SAP
Note 980426 - Oracle 10.2 Software installation on new operating systems
Shanaka. -
Oracle 9i installation problem with RedHat 7.2 (segmentation violation)
I have try to installation 9i with RedHat 7.2 by x windows.
when i use xwin to run the "./runInstaller, i got the error
(segmentation) as below:
i have already try to follow the installation procedure in
http://staff.in2.hr/denis/oracle/901install_rh72_en.html#1 but
still got this error.
Can anyone help me??
Regards
Chris Sung
=================================================================
===============
oracle install
Connecting 192.168.1.3 via TELNET
Thursday, December 13, 2001 1:04:06
Red Hat Linux release 7.2 (Enigma)
Kernel 2.4.7-10 on an i686
login: oracle
Password:
Last login: Thu Dec 13 00:46:39 from apple
[oracle@orange oracle]$ (/home/oracle/Disk1/runInstaller -
display 192.168.1.2:0
-name "oracle install" &)
[oracle@orange oracle]$ Initializing Java Virtual Machine
from /tmp/OraInstall/jre/bin/jre. Please wait...
SIGSEGV 11* segmentation violation
stackbase=0xbffff298, stackpointer=0xbffff160
Full thread dump:
"Finalizer thread" (TID:0x4276d210, sys_thread_t:0x4d0bfe0c,
state:R) prio=1
"Async Garbage Collector" (TID:0x4276d258,
sys_thread_t:0x4d09ee0c, state:R) prio=1
"Idle thread" (TID:0x4276d2a0, sys_thread_t:0x4d07de0c,
state:R) prio=0
"Clock" (TID:0x4276d088, sys_thread_t:0x4d05ce0c, state:CW)
prio=12
"main" (TID:0x4276d0b0, sys_thread_t:0x80d6fe8, state:R)
prio=5 *current thread*
java.lang.System.initializeSystemClass(System.java)
Monitor Cache Dump:
Registered Monitor Dump:
Thread queue lock: <unowned>
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Dynamic loading lock: <unowned>
Monitor IO lock: <unowned>
Child death monitor: <unowned>
Event monitor: <unowned>
I/O monitor: <unowned>
Alarm monitor: <unowned>
Waiting to be notified:
"Clock" (0x4d05ce0c)
Monitor registry: owner "main" (0x80d6fe8, 1 entry)
Thread Alarm Q:Strange, but yesterday I nter in Oracle9i install, open
gnome-terminal window as oracle user and simply type
/tmp/Disk1/runInstaler
the DISPLAY enviroment variable was set,
using RedHat 7.2 , kernel 2.4.16-0.9, glibc-2.2.4-19
Segmentation violation 11 may mean RAM problem, sometimes
incorrect program pointer.So I think it must work (runIstaler) -
Oracle 10G installation problem, and errors on SOLARIS 10 x86
HI.
I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
Could anybody tell me how to solve these problems, please?
Thank you :)Two options:
1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
2. Create database manually (without DBCA) -
OracleAS 10g Installation Problem on Windows2000
I install OracleAS 10g for Business Intelligence et Forms
While demanding to register for Oracle Internet Directory,
I seize:
host: liu-gwej0o37upx (its my machines name in that I install Oracle9i Server)
port : 389
then this is a message of error that the host and port art not correct.
So I check the connection to Oracle directory manager. I have a problems connection with a massage: server liu-gwej0o37upx is not started. But Im sure that my server is started.
Thanks for someone to help me to resovle this problem
florentanyone has clue
-
Oracle 10g installation problem
I deinstalled oracle 8i from machine . Removed all the oracle folders from the machine. Restart the machine.
I started fresh installation.
For 'Setting up 'CSS Single-instance Common Files 10.1.0.2.0' - it gives me error
Error in starting the service. The service OracleCSService not found.
I go to service and in services - the path for this service is C:\OraHome_1\bin\ocssd.exe service but with present installation the executable is at
C:\Oracle\product\10.1.0\db_1\bin.
How can I change the path in service for the executable ?Hi
This is a known problem with 10G Release 1. Why not install release 2?
I had the same issue last week and it turned out that the problem was that I was logged in as a domain user (with local admin rights). I created a local user on the machine with administrative privileges and used that user for the install and the database creation without any problems. -
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed TanvirHi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger -
Oracle 10g installation on Windows 7
I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
is it possible ??
thanks,
JJPossible yes? Brilliant no!
Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops. -
Oracle 10G connection problem
I launch my db with the following script:
su - oracle -c "export ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 && /u01/app/oracle/product/10.1.0/db_1/bin/dbstart"
su - oracle -c "export ORACLE_HOME=/u01/app/oracle/product/10.1.0/db_1 && /u01/app/oracle/product/10.1.0/db_1/bin/lsnrctl start"
Here is the output:
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Feb 27 22:17:51 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORACLE instance started.
Total System Global Area 188743680 bytes
Fixed Size 778036 bytes
Variable Size 162537676 bytes
Database Buffers 25165824 bytes
Redo Buffers 262144 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Database "orcl" warm started.
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 27-FEB-2004 22:17:59
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.1.0.2.0 - Production
System parameter file is /u01/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.1.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xavan_fi
xe)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.2.0 - Production
Start Date 27-FEB-2004 22:17:59
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.1.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.1.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xavan_fi
xe)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
But when i try to connect with sqlplus:
oracle@xavan_fixe oracle $ sqlplus
SQL*Plus: Release 10.1.0.2.0 - Production on Ven. Févr. 27 22:19:32 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Enter user-name: scott
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directoryWhen you go to get connection you have to set the ORACLE_SID enviroment variable or use the service name in the string to get connection.
Joel Pérez -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
Error encounded during oracle 10g installation on mac os 10x
Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
VijayaprakashDuplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini -
OracleAS 10g installation (please Help)
Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to meOracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin
Maybe you are looking for
-
Mail is now slow in deciding to send e mail...
Using 10.10.3, the latest version last week, I am seeing a distinct slowness when sending e mails. It used to be, press send and it flew away, now I press send and sit back and wait for it to wind itself up to send something. Once over this initial s
-
Adding Payment Terms: 45 days End of Month
Hi, I am trying to add payment terms to Oracle 11i that are: 45 days then End of Month Can anyone let me know if this is possible? I have been able to add many other terms required, but cannot figure this one out. Thanks
-
Debit/Credit indicator in header tax tab in MIRO transaction
Dears, would it be possible to let me know if it's possible and how the debit/credit indicator can be included in the MIRO header tax tab? I'm working on a 4.6 SAP R/3 system and I have been looking to customizing settings related to the issue that I
-
My configuration: OracleBI Discoverer 10g (10.1.2.2) Oracle Business Intelligence Discoverer Plus 10g (10.1.2.54.25) Discoverer Model - 10.1.2.54.25 Discoverer Server - 10.1.2.54.25 End User Layer - 5.1.1.0.0.0 End User Layer Library - 10.1.2.54.25 O
-
Upgrading from RoboEngine 3.1 to RoboHelp Server 9
Old-time user, new ID. My company recently upgraded from RoboHelp 4 to RoboHelp 9. (Yes, we're slow about some things.) I was recently asked to upgrade our WebHelp Pro output, which had been posted to an old RoboEngine 3.1 server. Of course, the new