Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit

Good night Oracle community,
I'm having problems on using Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit that runs inside a virtual machine.
The first problem was the error ORA-12152 (unable to send break message) when using a 32-bit server version when trying to connect via SQLPlus using domain administrator user. I did reboot, tnsping, checked parameters and oracle support articles but neither help me. So I uninstalled it and installed the 64-bit version and it wasn't possible to run the applications like netca.
Now I installed it on a local profile version 32-bit to see if the problem was related to the domain.
My question is simple: is this environment ok to run a production database server? 11.2.0.3 is that stable with Windows 2008?
Thank you very much!

Oracle Database 11.2.0.3.0 is certified on Microsoft Windows (32-bit) 2008.
Error: ORA 12152
Text: TNS:unable to send break message
Cause: Unable to send break message. Connection probably disconnected.
Action: Re-establish connection. If the error is persistent, turn
n tracing and reexecute the operation.
Refer to MOS
ORA-12152 "Unable To Send Break Message" on Connection [ID 363638.1]

Similar Messages

BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice.

Installing forms 11gr2 services on windows server 2008 r2 64 bit

hello,
I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
Question.
1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
2. Can I used it without the fusion middleware?
3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
5. It is will be a AS server even if without the repository creation?
Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
Thank you very much.

... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

Cisco Security Manager Client running on Windows Server 2008 R2 (64 bit) in Terminal Service

Hello CSM Gurus,
Would there be any performance issues in CSM client software design if multiple instances of CSM client by multiple users ran concurrently on a Windows Server 2008 R2(64 bits) while CSM users accessing the server via Remote Desktop Services ?
In my environment, we have a CSM server at our major data center while security administrators from all over the world need to use this CSM server.
In order to overcome the latency of the CSM client due to the WAN network, the plan is to use a Windows Server 2008 R2(64bits) as a terminal server and all security administrators would need to access this terminal server via RDP and would launch CSM client on their desktop. The terminal server locates on the same LAN as the CSM server itself in order to minimize network latency in communications between the CSM clients running on the terminal server and the CSM server. there would be multiple instances of CSM clients running concurrently on the Windows Server 2008 R2, the terminal server.

Hi;
please check
Oracle Database 11g Release 1 (11.1.0.7.0) <<Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
Check Database 11g Release 2 Certification Highlights [ID 1065024.1]
But please check this thread
client 11gR2 install on Win 7 Pro fails java.lang.NullPointerException
Regard
Helios
Edited by: Helios- Gunes EROL on May 14, 2010 4:49 PM

Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit

installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
i have installed this but restarting of server making problem
i m not able to start opmn.ctl
what should i do is there any other version to be downloaded
I did.
1. i installed X 86 software as 64 bits is available for itanium only
2. it installed successfully after changing value in orapram.ini
now after reboot of server my opmnctl doesnt come up
what can be the issue?

hi,
1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
2nd..when you use the command opmnctl startall..what errors do you get..
3rd..can you specify the opmn.logs and ons logs
Regards
Fabian

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Installing CF9 on Windows Server 2008 Standard 64-bit

Hi-
I'm attempting to install a new ColdFusion configuration with a host who is useless regarding the support that they offer (for now, they shall remain nameless).
It's a Windows Server 2008 Standard 64 bit VPS configuration. MySQL is already installed so I'm on the hook to configure ColdFusion 9 with IIS (7.5, I believe). There are numerous settings which the installer does not seem to address so I've had to address several Module Mappings which failed during the install....
Can anyone point me to an installation doc for the above configuration? Will the CF installer eventually handle these issues or are we on our own to support this?
Thanks in advance,
Rich

My advice is to get out now and go to a site like hosting.com that has a solid track record hosting CF. There are several others to choose from. If they are starting this rough you will have constant problems.

Correct version for windows server 2008 Standard 64 bit

Hi could you help me to download the right version to install adobe reader in a machine running Windows server 2008 with 64 bit, since this machine doesn't have internet access I would need the offline installer but I don't know where to get it.
Thanks

Is this just for people sat at the server as if it were a workstation? Use the Windows 7 version.

Windows Server 2008 Standard 64 bit edt support Hyper-v replication

Dear Team.
Windows Server 2008 Standard 64 bit edt support Hyper-v replication or not.
If my primary physical server down so my secondary server act as primary server.

Hi,
Windows Server 2008 Hyper-V do not Support Hyper-V replica.
This is a new Feature in Hyper-V for Windows Server 2012.
http://technet.microsoft.com/en-us/library/hh831410.aspx#BKMK_Replica
Regards
Sebastian

Downgrade Windows server 2012 64 bit to windows server 2008 R2 32 bit

HI,
what I want to know is when Downgrading Windows server 2012 64 bit to windows server 2008 R2 32 bit, will there be any issues of the license? Can I use the same license of 2012 server for the new 2008 installation.

Hi,
Based on my experience, we cannot use the Windows Server 2012 license key to activate a Windows Server 2008 install.
In addition, which channel the windows server 2012 was purchased through? It seems that the media and product keys to downgrade are not provided although downgrade rights are granted
since Microsoft only supplies bits and product keys to Volume License customers and only for certain versions and editions of the software.
I recommend you to contact the Licensing Activation Centers below for assistance:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best regards,
Susie

Running oracle database xe (express edition) on windows server 2008 r2

Is it supported to run Oracle Database XE on Windows Server 2008 R2?
Database XE is only supported as 32-bit. Current builds of Windows Server 2008 only come in x64 configurations.
Here are the Database XE system requirements for windows:
[http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm]
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).
See:
- [Wikipedia page about windows server 2008 with info on R2|http://en.wikipedia.org/wiki/Windows_Server_2008#Windows_Server_2008_R2]
- [Wikipedia page on "windows 32-bit on windows 64-bit"|http://en.wikipedia.org/wiki/WOW64]
Thanks,
Matt

Hello Matt,
Is it supported to run Oracle Database XE on Windows Server 2008 R2?No.
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.So this means that only 32bit versions of 2008 will be supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).Which is probably why 2008 R2 is not supported.
You can either take the VM approach and install a 32 bit Windows or 64 bit Linux host, or you can queue in the list of persons waiting for a 64 bit Windows release. See the following thread for details (and the queue) for the latter: {thread:id=2277728}
-Udo

Oracle Dev-suite 10g installation on WINDOWS server 2008 R2

Hi Friends,
Is it possible to install Oracle Dev-suite 10g on WINDOWS server 2008 R2.Any idea on this,can you please share.
Best regards,
Rafi.

Hi John,
Is it possible to do this by applying any patches or alternate option.
Best regards,
Rafi.

Oracle 11g R2 install problem on Windows Server 2008 R2 SP1

Hi all,
Trying to install the Oracle 11g R2 database onto Windows Server 2008 R2 SP1.
I get as far as running the setup and a black window flashes up on the screen and disappears.
The log files only show the following:
Using paramFile: C:\Temp\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
I've tried running setup -debug from the command line but no further information is logged.
Any help in troubleshooting further is appreciated.

That is the complete log file. No error messages or further information is given.
I'm not sure how to check:
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
I have checked on:
http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm
The server meets all the hardware requirements. The default file share is accessible and it is running a supported browser. The installer is being run with Admin rights. I'm not sure what else I need to check.

Toad for Oracle 10.1 on Windows Server 2008 SP2 64-bit

Hello guys,
I want to ask your opinion regarding an issue?
I want to install the Toad for Oracle application on my machine
(Windows Server 2008 Enterprise SP2 64-bit)
I have already installed Oracle DB 11g R2 64-bit for Windows.
I have tried to install Toad for Oracle version 10.1.1.8 making no use of any Oracle Client,
but it displays an error "Oracle Client not found!"
Now, I have read this article Oracle Home is not Valid on TOAD
and it says
>
TOAD required 32 bit Oracle client on 64 bit windows server systems
all you need is install Oracle 32 bit client, the toad will work.
>
I installed the 32 bit Oracle client, but now I'm getting
Ora-12154 TNS: could not resolve the connect identifier specifiedAny advice?

See the explanation here - Re: ORA-12154 could not resolve the connect indentifier specified
Srini

Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard

Hello,
For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g.
We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure for 10.1.0.4.
Since we don't have that software version to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard?
Could you point me out a document that reference Oracle versions compatibilty with Windows Server 2008?
Thanks

At MOS, click on the certifications tab, then enter database in the first drop down box, and select the rdbms. Then enter the relevant info in the other boxes, and then you will see Oracle Database 10.1.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
Certification is a little more strict than supported, but extended support ended in January. REMINDER: Premier Support for Oracle Database 10.1 ends January 2009 [ID 761713.1]
There's always lifetime support, but your case shows how useful that can be.

Oracle 11.2.0.3 on Windows Server 2008 R2 64-bit

Similar Messages

Maybe you are looking for