Oracle 11g Client installation command

pls can I know how to install Oracle 11g using runInstaller sliently.

Check out the installation documentation.
You'll either want the Universal Installer and OPatch User's Guide for Windows and UNIX or one of the OS specific guides.

Similar Messages

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Oracle 11g client installation on Solaris in non GUI mode

Hi,
I want to know if there is a way i can install Oracle 11g client on Solaris 10 machine in non GUI mode (ie. i want to do it from a command based terminal)
Thanks
Anup

Hi Anup
You have two ways to install it
1) Client installation without response file
Please Refer to Doc ID 885643.1
2) With Response file
Refer to the document available in Document library
Document Oracle® Database Client Installation Guide
11g Release 2 (11.2) for Solaris Operating System
Note: from 11gR2 onwards you can create a response file from GUI also and then use it later on for silent installation.
Hope this is helpful for You
Regards
Sudhir
Edited by: user13090769 on Sep 1, 2010 10:55 AM
Edited by: user13090769 on Sep 1, 2010 10:56 AM

Oracle 11g Client Installation on Ubuntu

Hi, I tried to install the Oracle 11g Client on my Dell Inspiron laptop running ubuntu, the thing is that I did every step described in the Installation Guide but when I ran the ./runInstaller file, at the installation point the assistant raises an error and prompts for an action (Ignore, Retry, Cancel), and even if I choose ignore it keeps raising the same error, then I noticed in my terminal that the errors was because ubuntu couldn't find some commands used in the installation script, and that there was no installation steps for ubuntu in my guide, so I think the Client Installer I downloaded wasn't for ubuntu... could be the reason why I can't install the client? is there a script or some way to install the client on ubuntu?
Thanks!
Edited by: user10232758 on Oct 23, 2008 7:34 AM

Unfortunately there's no (official) installation guide from Oracle,because it's not supported. If you want to continue go to the Linux Technology Center on OTN and follow the instructions for unsupported platforms (under Installation Guides):
http://www.oracle.com/technology/tech/linux/index.html
http://www.pythian.com/blogs/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
Werner

Windows 7, Oracle 11g Client Post-Installation Error

Hello all--
Background Info:
- I have installed Oracle 11g Client (32-bit) on my Windows 7 Professional (32-bit) workstation.
- The ORACLE_HOME directory (in my case C:\Oracle\Ora11g) is in the PATH environment variable.
- I have created TNS_ADMIN as an environment variable that points to a network folder that contains our tnsnames.ora and sqlnet.ora.
- I can tnsping our servers and sqlplus connects without issue.
- I am logged in as a regular network user (added into the local Administrators group on my machine).
The problem is that I cannot connect using a user or system DSN in the Microsoft ODBC Administrator, BUT, I can connect with a DSN when I am logged in with the local Administrator account. I have verified the DSNs are setup correctly. The error I get is the ORA-12154 error.
Here is the exact error as it appears:
Unable to connect
SQLState=08004
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified
If I copy the tnsnames.ora file from the network to my machine and remove/redirect TNS_ADMIN to the %ORACLE_HOME%\NETWORK\ADMIN folder, it works with my user account.
Any thoughts?
Thanks!
Matt

Hi All--
I figured out what the problem was and I wanted to share what our solution was.
Basically, when you open the Microsoft ODBC Administrator in Windows 7, it has to run with elevated privileges and loads the Administrator profile. Our tnsnames.ora and sqlnet.ora files are on a network share that we map to a drive letter for all users across our organization. The Administrator profile does not have this drive mapping. So I created the TNS_ADMIN environment variable with the full UNC path and I was able to test DSNs successfully.
Regards,
Matt

Microsoft ODBC for Oracle on a Windows 7 64Bit OS and Oracle 11g Client

Hi,
I have installed Oracle 11g client 64Bit edition on a Windows 7 Professional 64Bit OS. Trying to connect to Oracle DB through ODBC Driver I get the following Message:
Microsoft ODBC for Oracle:
"The Oracle(tm) client and networking components were not found. These components ar supplied by Oracle Corporation and are part of the Oracle Version 7.3 (or greater) client software installation....".
Any ideas how to resolve that problem?

Hello,
Please verify the ORACLE_HOME directory is listed on the PATH system variable of Windows 7. Please open the Command Prompt
and examine the result of the command PATH.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Oracle 11g client / oracle 10g express edition in one computer

Hi All,
I already have Oracle 11g Client installed in my computer. I wanted to Install Oracle 10g Express Edition in the same computer. So that I shall work with that even when I am not in the network. My Question is : Will installing both of 11g Client and 10g XE will cause conflict in my computer or is it ok to install both. Any suggestion/information is appreciated.
Regards,
RRR

Hi,
i have installed oracle oraclient11g_home1, want to know the changes in tnsnames.ora.
below tnsnames.ora file got created after installation. I dont know
CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
<alias>= [ (DESCRIPTION_LIST = # Optional depending on whether u have
                    # one or more descriptions
                    # If there is just one description, unnecessary ]
     (DESCRIPTION=
     [ (SDU=2048) ]     # Optional, defaults to 2048
                    # Can take values between 512 and 32K
     [ (ADDRESS_LIST=    # Optional depending on whether u have
                    # one or more addresses
                    # If there is just one address, unnecessary ]
     (ADDRESS=
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=tcp)
          (HOST=<hostname>)
          (PORT=<portnumber (1521 is a standard port used)>)
     [ (ADDRESS=
          (PROTOCOL=ipc)
          (KEY=<ipckey (PNPKEY is a standard key used)>)
     [ (ADDRESS=
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=decnet)
          (NODE=<nodename>)
          (OBJECT=<objectname>)
... # More addresses
     [ ) ] # Optional depending on whether ADDRESS_LIST is used or not
     [ (CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
     [ (SOURCE_ROUTE=yes) ]
     (DESCRIPTION=
     [ (SDU=2048) ]     # Optional, defaults to 2048
                    # Can take values between 512 and 32K
     [ (ADDRESS_LIST= ]     # Optional depending on whether u have more
                    # than one address or not
                    # If there is just one address, unnecessary
     (ADDRESS
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=tcp)
          (HOST=<>)
          (PORT=<1521>)
     [ (ADDRESS=
          (PROTOCOL=ipc)
          (KEY=<ipckey (PNPKEY is a standard key used)>)
     ...           # More addresses
     [ ) ]           # Optional depending on whether ADDRESS_LIST
                    # is being used
     [ (CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
     [ (SOURCE_ROUTE=yes) ]
     [ (CONNECT_DATA=
     (SID=<oracle_sid>)
     [ (GLOBAL_NAME=<global_database_name>) ]
     ... # More descriptions
     [ ) ]     # Optional depending on whether DESCRIPTION_LIST is used or not

Oracle 11g Client and XML DB

We have moved our applications in a mix environment (DB on Linux and App. Server on Windows) on Oracle 11g.
On the past we have tested the applications and they were working, now seems nothing is ok, it is like the 10g instant client on Windows is unable to communicate with Oracle 11g DB working on XMLDB.
May I ask if someone have seen the same problems?
Testing on Windows all the environment it was all working, but it was installed all on the same machine.
Stefano

Ozark DBA wrote:
Just need confirmation that the old 10g Java based Enterprise Manager is gone forever with 11g and there is no management console in the 11g client installation (at least I cannot find one). Confirmed. Same as in the Database install.
And after searching the threads ond Oracle documentation, it appears that I can install 11g database on my local pc and then have a dbconsole (not grid control). Please confirm that this dbconsole only points to the specific database installed on the same local pc, and it cannot be used to manage remotely located 10 or 11g databases. Confirmed. The DB Console is tied to one ORACLE_HOME one one HOST for one INSTANCE. The HOST and INSTANCE are used in the directory naming (of all stupidity) and configuration file contents under the ORACLE_HOME.
I am still in the planning stages for grid control installation and would like to use the smaller enterprise manager - java control. But again, there is no such Oracle application for 11g now? I must use grid control to manage multiple databases?Confirmed. Fortunately, the Grid Control is included in the Database license as per the database Licensing manual, and you can put the Grid Control on a separate machine. Since the Grid Control is fed using a single agent for all product (database, and anything else) on the target host, the Grid Control puts on a much smaller footprint on a database machine than even the old Java console.
Note that the 11g Grid Control will be (at least) announced tomorrow by WebCast - check OTN.

Oracle 11g Client Certification Matrix

hi all,
Can someone point me to Oracle 11g client certification matrix? I was trying to install it on Windows Server 2008R2, but looks like this platform is unsupported. If I manually verify the options the installer thinks are unsafe, will I create an unsupported environment?
Please advise.
Thanks in advance,
Alla

Which version of 11g ? 11gR1 is not certified with Win2008
http://download.oracle.com/docs/cd/B28359_01/install.111/b32306/toc.htm#BABEHGHH
For 11gR2, pl see MOS Doc 867040.1 (Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2)
HTH
Srini

Oracle 11g client latest

Hi
Please give the oracle support document or link with instructions for installing
Oracle 11g client (latest version) on windows server 2008 64 bit.
Please also give the link for downloading the oracle 11g client too.
Many thanks

Hi
I did the full installation of the database 11g R2 using the universal installer.So the client dlls and database dlls will be installed in the same location?(oracle home\bin) or will it be separate locations?how will i check this?Its just a matter of pointing the path settings to the client dlls for our app to run correctly, as no separate client installation will be needed then.
Another question related to this is,
we have got a few clients who use 10g database who import our data to their 10g databases.
We used to use 10g exp utility before.
Now, its documented that the 11g exp utility wont import to 10g database.
So if we have to use 11g (not installing 10g at all on our side), expdp instead , what should be the value of VERSION parameter to be used?COMPATIBLE or specific version?(Different customers are different versions of 10g yet single application running export)?
Thanks&Regards..
Edited by: Krithi on 22-Apr-2013 09:27

Install Oracle 11g client on Windows 7

Hi,
I am getting an error while installing Oracle 11g R1 client(11.1.0.7.0) on Windows 7 x32.
Error: OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation : install the recommended service pack.

Only for Oracle 10g client installation on win 7 32, 64 bit
To get going with oracle on windows 7 64-bit. You can install oracle 10g 32 which you use for windows XP. Its unusal but successful. Install 10G it will get installed on program files x86. Then open tnsnames.ora files which will be either in program files x86/oracle/....search or it will be in c:\oracle...write the correct server name in tnsnames and in PB while doing the configuration..write tns:servername in the server textbox. I did that and it got connected...incase u need any help let me know my email address is [email protected]
cheers
Kishan Changlani

How to remove Oracle 11g client from Windows 7 64-bit workstation.

When the Oracle 11g client was installed on a Windows 7 64-bit workstation, it was mistakenly installed as "Administrator".
We do not wish to do this; instead we want to install this client as a user with Administrator privileges.
PLEASE NOTE THE DIFFERENCE BEFORE REPLYING TO THIS THREAD!!!!!!!!
When I try to install the client, I get a message sending me to this directory:
F:\app\Administrator
I do not know why this message is produced; the directory it refers to DOES NOT EXIST.
My suspicion is that there extraneous entries in the registry which have not been removed; the obvious ones such as HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE have been deleted.
What I believe I need is a COMPLETE list of entries placed in the registry upon installation of the Oracle client.
The obvious problem is that the Uninstall feature of Oracle client does NOT FULLY remove all of the above entries.
As a side note, the Oracle client software installation needs to be revamped to detect situations such as this and provide a course of corrective actions.

I've not done it yet with 11g, but prior editions, there are 3 things that have to be done to eradicate an oracle client installation from Windows, after running uninstaller
1) delete the registry key HKLM\software\oracle
2) delete the ORACLE_HOME directory from the file system
3) delete c:\Program Files\oracle

11g client installation hangs on 21%

11g client installation hangs on 21% (11.1.0.6.0)
Has anybody an idea how to fix the problem?
OS: Win XP Pro SP3 (5.1 Build2600.xpsp_sp3)
the last lines of installActions.log are:
INFO: config-context initialized
INFO: *** Installieren Seite***
INFO: FastCopy : File Version is Compatible
INFO: Installationsmodus entspricht Fastcopy-Modus für Komponente 'oracle.client' mit Installationsart 'Runtime'.
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Variable "ROOTSH_LOCATION" wird auf "C:\orant\client11\root.sh" gesetzt. Der Wert ist von einem Codeblock eingegangen.
INFO: Fastcopy-Vorgänge werden basierend auf den Informationen in der Datei 'oracle.client_Runtime_1.xml' ausgeführt.
INFO: Fastcopy-Vorgänge werden basierend auf den Informationen in der Datei 'oracle.client_Runtime_dirs.lst' ausgeführt.
INFO: Fastcopy-Vorgänge werden basierend auf den Informationen in der Datei 'racfiles.jar' ausgeführt.
INFO: Fastcopy-Vorgänge werden basierend auf den Informationen in der Datei 'oracle.client_Runtime_filemap.jar' ausgeführt.
INFO: Fastcopy-Vorgänge werden basierend auf den Informationen in der Datei 'oracle.client_Runtime_exp_1.xml' ausgeführt.
INFO: Fastcopy-Vorgänge werden basierend auf den Informationen in der Datei 'setperms1.sh' ausgeführt.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.ntoledb.odp_net:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.ntoledb.odp_net_2:11.1.0.6.0
Edited by: user8901423 on 17.12.2009 03:21

Although I didn't have any problems to install the client on Windows XP (assuming it's Professional,not Home), you may try a custom installation instead of 'runtime'. The last lines in the logfile refer to the .net component,not sure whether there's a problem.
Werner

Oracle 11g client Update Problem

Hi ,
I have problem with oracle 11g client, I have a treatment that is has selected information and update after the last treatment.The problem is that the update is sometimes the enssemble fields, even those I do not want to update.
I use the 11g client with c #, my procedure is like update WHERE num = @ aram.I have doubts about the problems of loss of connection, because it give me the log: host not found, but there is a transaction, and in case of emergency I did a rollback.is there anyone who approaches to this problem??I took you to kindly help me, because the project and in production mode

Apart from the fact that this has nothing to do with Oracle Forms the certifications and the version checks of the installer are there for a reason. Copying one version file doesn't make your RHEL6 a RHEL3. RHEL6 most certainly uses a different kernel, different libraries, different everything then RHEL3 (yes, Software Vendors change version numbers of their products not just for fun!). You might get lucky (using your friend google) that you get it working with some effort, but this doesn't guarantee that everything works and given the fact that this is not certified getting help is not that easy. Better yet is to save yourself the time and stick with certified combinations (maybe use OEL insted of RHEL?)
cheers

Oracle 11g R2 Installation on Windows 7 (64 bit)

While installing, it is asking for Proxy Server. What should I enter?

I'm installing on laptop Oracle 11g R2 Installation on Windows 7 (64 bit) it was asking me to enter Proxy server details, since I'm not connecting internet with proxy I've skipped the step. But after that when reached the "System class" there was two radio buttons 1)Desktop Class - which selected default and clicked on Next button, then it disappeared. Looks like process was stopped. i have looked it in Windows Task manager it is not there.
Is any one know what is going on?
Thanks.

Oracle 11g Client installation command

Similar Messages

Maybe you are looking for