Oracle 11g EM error after installation

Hi dears
I installed ORacle 11g on Windows. installation comipleted successfully, but I got an error at the end of the installation that:
"Enterprise Manager configuration failed due to the following error -
Error starting Databae Control
Refer to the log file at c:\..... for more details
You can retry configuring this database with Enterprise Manager later by manually running c:\..... "
What might be reason of this error? I and my friend installed 11gR1 on windows many times, and each time we got this error
any help will be appreciated
thank you

As requested already, post the log file. One thing, you need to ensure that you don't have the DHCP based system but would have a static IP for the machine otherwise you must install a loopback adaptor for the machine before you would configure the EM again. This may not be the error for your EM's failed installation but this is one of the prominent reasons for sure for the failure.
HTH
Aman....

Similar Messages

  • Receiving error after installation when attempting to open Cricut Craft room.

    Receiving error after installation when attempting to open Cricut Craft room. It says 'Application Descriptor cannot be found for this application." I have tried uninstalling/reinstalling/installing older version. Any ideas?

    Thanks for the help that fixed my problem for the initial error, but I
    still get the same error when I am writing a U16 2-D array to a range
    of cells. This is strange because the same code is used elsewhere and
    does not throw the error, but the data type is instead a Dbl 2-D
    array.  Unfortunately, I am unable to post the code.  It is
    on a stand-alone classified pc.

  • Error while opening Oracle Database 11g Express Edition after installation.

    After finishing the installation of Oracle database 11g Express Edition, when I tried to open it, it shows following error : windows cannot find `http://127.0.0.1:%HTTPPORT%/apex/f?p=4950`.Make sure you typed the name coorectly, and then try again.
    What the above error means? I followed the installation steps as given in the link.

    Hi,
    Follow thread may help you.
    <<Newbie on running Oracle 11g - Windows cannot find http:something
    Regards,

  • Errors in Oracle 11g R2 Grid Infra Installation

    Hi all,
    I went through the steps to install Oracle 11g R2 Infrastructure on RHEL 5.2 (32-bit) in a couple of Vmware machines.
    - As I relied on the Vmwaretool for time sync, I didn't configure SNP.
    - As I don't have a DNS server, I configured the scan-rac in /etc/hosts.
    I know in production this is wrong, but for this testing env it is Ok (according to http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php)
    All the configuration went Ok and the OUI went on successfully till
    it reached to the last step: "Oracle Cluster Verification Utility" which, as expected, failed.
    It generates the following long and complicated log: http://www.ahmedbaraka.com/temp/installActions.txt
    My question is: Did all the errors in the log result only from the SNP and SCAN issues? Is there any other discovered issues?
    Thanks in advance.

    this could be just from ntp.
    The following note might be of assistance:
    CTSSD Runs in Observer Mode Even Though No Time Sync Software is Running [ID 1054006.1]

  • Oracle 11g SOA-BPM PS3 Installation Help

    I'm not a super techie, so installing the latest release from Oracle was a challenge, but I encountered a number of problems and kept notes of what I did to solve it. Many of these hints came from the Forum, but nothing had all of the relevant info under one thread. So here is what I pieced together. If this is helpful to anybody, I'd love to hear it - either on this thread or at my e-mail address of [email protected]. My thanks to Linus Chow of Oracle for some help and allowing me to think I could do this!
    Comments/Suggestions on Oracle 11g SOA-BPMN PS3 Installation_
    Suggest downloading all files into a common directory. I stuck this folder at the root (C:) drive. At collectively just over 5 GBs, the downloading will take several hours (for me it was a full day, as did the installation). You will need an OTN account to be able to download the software. A good overview of PS3 is at the following link: http://blogs.oracle.com/bpm/2011/01/bpm_suite_11gr1_ps3_released.html.
    General comment/suggestion. Be sure to name the aforementioned folder without any spaces (big problems if this is done because of how unzipped files do/don’t work with a path name with spaces in it). As the installs get started, note that an Oracle directory (under the root) with a default name for the middleware directory, named Middleware, is created as the default.
    The link with the installation is actually helpful, but it is incomplete (http://www.oracle.com/technetwork/middleware/bpm/downloads/index.html). Some of the detail needed is in the quick installation guide (http://download.oracle.com/docs/cd/E17904_01/install.1111/e14318/toc.htm, and I suggest downloading the PDF version), but the order conflicts with the previous information. I resolved this by using the latter for detail, but the former for the sequence. I also had to turn to several blogs/forums (the main one being: http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html) to get help on troubleshooting problems with the installation (see below for others).
    I have a Windows 7 Professional 64-bit version, but I ended up following the path for the 32-bit install path (see the main link cited above), mostly because it was unclear to me what the 64-bit path would be. I also already had the 32-bit version of the JRE installed. The following links cover identifying the differences and what you may have installed as well as alternative versions to download: http://www.java.com/en/download/faq/index_general.xml?user_os=Windows%207; http://www.java.com/en/download/faq/java_win64bit.xml; and http://www.java.com/en/download/manual.jsp.
    Another general comment/suggestion. I found it useful to reboot after each step. It shut down services that I would otherwise have to search for and shut down manually. Some of the installations require services activated by previous steps to be turned off, so you’re better off doing something like this rather than encountering such an error in a subsequent step.
    Step 1: Installing the XE database. The file is an .exe file, and will execute upon a double click. However, the instruction regarding RCU is best saved until the 3rd step, doing it just before you install the RCU. More importantly, there are some things to keep in mind about the database install. First, after installation, you should sign on to the DB, using the Go To DB Home Page option under the Express Edition (XE) folder or set of menu options (created as part of the installation), under the SYSTEM user account. During installation, you’ll have to have given a password for this account, so make sure it is one you can remember. After signing on as SYSTEM, give the SYS user account another (or same) password that you can remember. You will use the SYS account in subsequent steps. Second, there is a parameter for the database that must be changed from the default. This is covered in the links below: http://blogs.oracle.com/tridib_samanta/2010/03/rcu-6107db_init_param_prerequisite_failure_for_processes.html and http://cn.forums.oracle.com/forums/thread.jspa?threadID=1004605. To solve this, select SQL button on the DB home page, then SQL Commands button on the next page, paste/enter into the pane at the top the following command, “ALTER SYSTEM SET processes=300 SCOPE=SPFILE;” (but without the quotes), and then click on the Run button. (The parameter must be greater than or equal to 200, but I found references to setting in equal to 300 or 500.) Then you can log out and close the web page.
    At times, the DB might not be started when you are expecting it to be running (e.g., after a reboot), which is covered in this link: Oracle 10g database homepage not working? (You’ll know that it is isn’t running if you try to open the Go To DB Home Page option and it won’t open, displaying an error page instead.) I found that the simplest way to fix this was to go to the Control Panel, Administrative Tools, Services, and then look to see if the OracleServiceXE service is started. If not, then restart by right-clicking on that service listing and choosing the appropriate option to execute.
    Step 2: Installing WebLogic Server. Either before or during this process, you will need to set up an Oracle Support Account. However, you need a customer ID to be able to create a profile. I was thus not able to complete a profile, so the WLS installation defaulted to the Anonymous registration option. This still needed an e-mail address though, the same one with which you would create the Oracle Support profile, so you should have one at the ready. (It would not accept the e-mail address for my OTN account.) As far as I can tell, the consequence of this path is that I cannot automatically get patches and such. I figure this is a problem to be solved another day. The Oracle Support links are: https://support.oracle.com/CSP/ui/faq_en.html#SignIn and https://support.oracle.com/CSP/ui/flash.html.
    If you go with the default, the middleware directory is just Middleware under the Oracle directory. If you select a different name or location, you will need to remember where it is and what the name is. You should also note the folder name for where the JDK was stuck, which for me was JDK160_21 under the Middleware directory.
    Step 3:  Installing RCU. The trickiest of the steps. Unlike with the previous two steps, this installation first happens after the downloaded file is unzipped. You MUST unzip into a directory for which the full path name (and not just the one you create upon extraction) is without any spaces. (You can use the underscore symbol instead of a space to indicate separation.) Unzip the folder/files, and then open the Command Prompt window. Using the cd command, work your way to the full path name to where you just unzipped these files. Next, continue to work your way down to subfolders created during the extraction process. You want to end up at the rcuHome\BIN\ subfolder. THEN do the RCU-related command cited in Step 1. Type in at the prompt the following command and hit enter: set RCU_JDBC_TRIM_BLOCKS = TRUE. Then, type in rcu.bat at the prompt and hit enter, which will run the installation and configuration sequence. This is realized through a series of windows that open for you to input information and make selections. Use the document at the following link of specific guidance as to what the configuration screens should have entered on them: http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html. This includes things like the service name (XE) and the host name (localhost) to enter, assuming you are installing this on a laptop or PC for local use only. Some other helpful links for troubleshooting the RCU installation are located at: http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14259/rcu.htm#CIHGHDBG; http://oraclebi.blogspot.com/2010/08/rcu-and-what-it-means-for-you.html ; Re: RCU 11.1.1.4 install fails on Oracle XE and http://cn.forums.oracle.com/forums/thread.jspa?threadID=2162409&tstart=0&messageID=9336791.
    The RCU sets up DB schemas and the like for the BPMN and SOA stuff. The screenshots in the previously mentioned document should be followed exactly. You can also refer to pp. 5-6 of the Quick Installation Guide. You should use the SYS user account (the default, I think), so have the password handy.
    I also found it more comforting to shutdown the RCU installation/configuration via the cancel option than to keep going back a screen to fix something. This may not have been necessary, but it made me feel better. Be prepared for interim screens that pop up to show that the installation/configuration is happening, which will also tell you there are errors. One such screen says that XE isn’t supported for RCU, but you can ignore that (as the supporting guidelines indicate).
    Step 4:  Installing JDev. This is an executable, and you just install with all of the defaults. This process will start the WLS as part of the installation, so you must turn it off before going to the next step. Again, I just rebooted to do this.
    Step 5:  Installing SOA Extensions for JDev. Instructions on the page at the main link are clear and correct. The 2 screen shots must be reviewed and adhered to completely in checking off options. The first selection defines the areas where updates are to be sought out, while the second selection is from the available option(s) from those areas. In this case, you are only installing the SOA Composite Editor, though there are several other updates/extensions from which to select (but don’t, at least for now).
    Step 6: Installing BPM Extensions for JDev. Same comment as for Step 5, except that the option you want to select is not as what is indicate (the BPM Composite Editor) but the BPM Process Studio! I would advise against doing these as part of the same update sequence. In fact, I closed out JDev completely (though I did not reboot) between Step 5 and Step 6.
    Step 7 and 8:  Installing SOA Suite. I suggest unzipping both of the downloaded zip files. Again, it is critical that the full path name into which files are extracted contains no spaces. Once unzipped, you should navigate to the Disk1 folder under the directory into which the first zip file was extracted, but you should do this with the Command Prompt window and the cd command. From this prompt, you should type in “setup.exe -jreLoc {location of JDK}” (without the quotes) and hit enter. The {location of JDK} is where the JDK was installed as part of the WLS installation. For me this was in folder JDK160_21 under the Middleware folder in the Oracle directory. Refer to pp. 12-15 of the Quick Installation Guide. This took me a couple of tries before I actually got the installation screen to show up correctly. Some of what this looks like is also in the following link: http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html.
    What you may eventually figure out is that 5 installation disks are stretched across two zip files. Once the installation of disks 1 and 2 are done, a popup window will ask you to browse to the folder where each of the next 3 disks are, which is in the folder created by the extraction of files/folders from the second zip file for the SOA Suite. As with previous steps, I rebooted after all of this was done.
    Step 9:  Installing the Business Process Converter. Unzip the downloaded file, and open the Installation Instructions Word file. It will instruct you to point JDev’s update sequence to another zip file extracted during the unzipping of the downloaded zip file for the converter. JDev will install this without much fuss or muss, but this installation is to the Studio and not to BPA. (For installation to BPA, you need to have installed BPA, and followed the other guidance in the instructions.) To get to JDev’s update sequence, follow the same first step as in Step 5, but check the option to browse for and upload from a local file. This local file will be the previously mentioned other zip file.
    -------------------------------------------------

    Create a new user oracle and proceed with the installation
    --> useradd -g oinstall oracle
    If your are forwarding your GUI using xming or vnc you would need to copy the xauth of root user and set it to oracle
    [server1:root] xauth list
    bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e
    [server1:root] sudo su - oracle
    [server1:oracle] export DISPLAY=localhost:10.0
    [server1:oracle] xauth add bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e

  • Oracle 11g stop working after installing Patch 1

    I'm new to Oracle. I installed Oracle 11g Database this weekend. The installation went well with no problems. However, after installing the base system I then installed Patch1. I had no problems installing the patch. I restarted my system and then started the EM. I received the following message from the EM:
    ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
    What does this mean and how do I fix it?
    I then did an uninstall of Oracle 11g and then re-installed it. The problem went away. So I'm confidenced that the installation of Patch 1 caused the problem.
    Thanks for your help.
    Lou

    I'm very sorry of the over sight on my part. My environment is as follows: Dell PowerEdge 1900 with 16gb of memory, 2 physical Quad processors and 4tb of disk space. I have the installed Oracle 11g on Windows 2008 Datacenter.
    I am trying to upgrade as follows: Oracle Database 11g Release 11.1.0.6 to Oracle Database 11g Release 11.1.0.7. I will implement the Post Installation instruction to see what happens. It was an oversight on my part.
    Thanks

  • Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86

    Hi All,
    I'm hoping somebody can shed some light on this issue.
    I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
    I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
    I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
    RESPONSE FILE:
    ## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
    ## Specify values for the variables listed below to customize ##
    ## your installation. ##
    ## Each variable is associated with a comment. The comment ##
    ## can help to populate the variables with the appropriate ##
    ## values.                                   ##
    # Do not change the following system generated value.
    oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
    # This variable holds the hostname of the system as set by the user.
    # It can be used to force the installation to use an alternative
    # hostname rather than using the first hostname found on the system
    # (e.g., for systems with multiple hostnames and network interfaces).
    ORACLE_HOSTNAME=
    # Unix group to be set for the inventory directory.
    UNIX_GROUP_NAME=
    # Inventory location.
    INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
    # Specify the languages in which the components will be installed.
    # en : English ja : Japanese
    # fr : French ko : Korean
    # ar : Arabic es : Latin American Spanish
    # bn : Bengali lv : Latvian
    # pt_BR: Brazilian Portuguese lt : Lithuanian
    # bg : Bulgarian ms : Malay
    # fr_CA: Canadian French es_MX: Mexican Spanish
    # ca : Catalan no : Norwegian
    # hr : Croatian pl : Polish
    # cs : Czech pt : Portuguese
    # da : Danish ro : Romanian
    # nl : Dutch ru : Russian
    # ar_EG: Egyptian zh_CN: Simplified Chinese
    # en_GB: English (Great Britain) sk : Slovak
    # et : Estonian sl : Slovenian
    # fi : Finnish es_ES: Spanish
    # de : German sv : Swedish
    # el : Greek th : Thai
    # iw : Hebrew zh_TW: Traditional Chinese
    # hu : Hungarian tr : Turkish
    # is : Icelandic uk : Ukrainian
    # in : Indonesian vi : Vietnamese
    # it : Italian
    # Example : SELECTED_LANGUAGES=en,fr,ja
    SELECTED_LANGUAGES=en,en_GB
    # Complete path of the Oracle Home
    ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
    # Complete path of the Oracle Base.
    ORACLE_BASE=C:\Oracle
    #Name : INSTALL_TYPE
    #Datatype : String
    #Description: Installation type of the component.
    # The following choices are available. The value should contain
    # only one of these choices.
    # InstantClient : InstantClient
    # Administrator : Administrator
    # Runtime : Runtime
    # Custom : Custom
    #Example : INSTALL_TYPE = "Administrator"
    oracle.install.client.installType=Custom
    # Name : oracle.install.client.customComponents
    # Datatype : StringList
    # This property is considered only if INSTALL_TYPE is set to "Custom"
    # Description: List of Client Components you would like to install
    # The following choices are available. You may specify any
    # combination of these choices. The components you choose should
    # be specified in the form "internal-component-name:version"
    # Below is a list of components you may specify to install.
    # oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
    # oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
    # oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
    # oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
    # oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
    # oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
    # oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
    # oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
    # oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
    # oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
    # oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
    # oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
    # oracle.network.client:11.2.0.1.0 -- "Oracle Net"
    # oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
    # oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
    # oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
    # oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
    # oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
    # oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
    # Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
    oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
    #Name : MTS_PORT
    #Datatype : int
    #Description: Port number to be used for by the Oracle MTS Recovery Service to listen
    #          for requests. This needs to be entered in case oracle.ntoramts is
    #     selected in the list of custom components in custom install
    #Example : MTS_PORT = 2030
    oracle.install.client.oramtsPortNumber=49152
    # Host name to be used for by the Oracle Scheduler Agent.
    # This needs to be entered in case oracle.rdbms.scheduler is selected in the
    # list of custom components during custom install
    # Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
    oracle.install.client.schedulerAgentHostName=
    # Port number to be used for by the Oracle Scheduler Agent.
    # This needs to be entered in case oracle.rdbms.scheduler is selected in the
    # list of custom components during custom install
    # Example: oracle.install.client.schedulerAgentPortNumber = 1500
    oracle.install.client.schedulerAgentPortNumber=
    LOG FILE TO FOLLOW

    LOG FILE:
    Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
    The commandline for unzip:
    Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Verifying target environment...
    INFO: Checking whether the IP address of the localhost could be determined...
    INFO: Completed verification of target environment.
    INFO: Inventory exists: false
    INFO: Registering setup bean
    INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
    WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
    INFO: Setting Response file data to the Installer
    WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
    INFO: Building Flow
    INFO: Building the flow graph
    INFO: Loaded state init
    INFO: Loaded state clientInstallType
    INFO: Loaded state productLanguage
    INFO: Loaded state getOracleHome
    INFO: Loaded state prereqExecutionDecider
    INFO: Loaded state checkPrereqs
    INFO: Loaded state postPrereqs
    INFO: Loaded state summary
    INFO: Loaded state clientCustomInstall
    INFO: Loaded state schedulerAgent
    INFO: Loaded state mtsDialog
    INFO: Loaded state setup
    INFO: Loaded state finish
    INFO: Linking states
    INFO: State[checkPrereqs]: route=success; to=summary
    INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
    INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
    INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
    INFO: State[clientInstallType]: route=ic_no; to=productLanguage
    INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
    INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
    INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
    INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
    INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
    INFO: State[init]: route=success; to=clientInstallType
    INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
    INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
    INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
    INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
    INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
    INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
    INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
    INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
    INFO: State[setup]: route=success; to=finish
    INFO: State[summary]: route=success; to=setup
    INFO: Successfully built the flow
    INFO: Opening bean stores from which the beans can be loaded
    INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
    INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
    INFO: Translating external format into raw format
    INFO: Loaded BeanStore using the flow data source
    INFO: Registering the flow data beans
    INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
    INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
    INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
    INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
    INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
    INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
    INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
    INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
    INFO: Set value for bean ClientSetupBean
    INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
    INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
    INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
    INFO: Closing bean stores from which the beans can be loaded
    INFO: Registering the flow views
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
    INFO: Initial values of Setup Properties :
    PROPERTY VALUE
    COLLECTOR_IGNORE_CONFIGURATION false
    COLLECTOR_IGNORE_FAILURES false
    COLLECTOR_RESPONSE_FILE
    DECLINE_SECURITY_UPDATES false
    FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
    ient\install\../stage/products.xml
    INSTALL_TYPE Custom
    INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
    MYORACLESUPPORT_PASSWORD Protected value, not to be logged
    MYORACLESUPPORT_USERNAME
    ORACLE_BASE C:\Oracle
    ORACLE_HOME C:\Oracle\product\11.2.0\client_1
    ORACLE_HOSTNAME GBA-P74444432
    PROXY_HOST
    PROXY_PORT
    PROXY_PWD Protected value, not to be logged
    PROXY_USER
    SECURITY_UPDATES_VIA_MYORACLESUPPORT true
    SELECTED_LANGUAGES {"en","en_GB"}
    oracle_install_LaunchNetCA false
    oracle_install_NoMigration true
    oracle_install_RACInstall false
    oracle_install_WindowsSystemDirectory
    oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
    0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
    .0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
    1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
    0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
    et_2:11.2.0.1.0"}
    oracle_install_client_OraMTSPortNumber 49152
    oracle_install_db_ConfigurationType
    oracle_install_db_InstallEdition EE
    oracle_install_db_InstallType
    INFO: Launching Oracle Client Installer
    INFO: Started executing the flow in SILENT mode
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state init
    INFO: Waiting for completion all forked tasks at state init
    INFO: All forked task are completed at state init
    INFO: Completed background operations
    INFO: Executing action at state init
    INFO: Completed executing action at state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <init>
    WARNING: Validation disabled for the state init
    INFO: Completed validating state <init>
    INFO: Verifying route success
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientInstallType
    INFO: Completed executing action at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <clientInstallType>
    WARNING: Validation disabled for the state clientInstallType
    INFO: Completed validating state <clientInstallType>
    INFO: In Transition of InstallTypesAction:
    INFO: Verifying route ic_no
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state productLanguage
    INFO: Completed executing action at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <productLanguage>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
    INFO: Completed validating state <productLanguage>
    INFO: Verifying route productlanguage_yes
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
    INFO: Verifying route INVENTORY_NO_CUSTOM_YES
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientCustomInstall
    INFO: Re-loading component config bean
    INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    INFO: Resolving dependencies
    INFO: Completed executing action at state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <clientCustomInstall>
    INFO: Completed validating state <clientCustomInstall>
    INFO: Verifying route TO_ENDCUSTOM
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:1023.5547MB (1048120.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    INFO: Expected Value:130MB
    INFO: Actual Value:21.3053GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    INFO: Expected Value:32-bit
    INFO: Actual Value:32-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    WARNING: Result values are not available for this verification task
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
    SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
    CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
    ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
    INFO: Advice is ABORT
    INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
    INFO: Completed validating state <checkPrereqs>
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is -3
    INFO: Shutdown Oracle Client Installer
    INFO: Unloading Setup Driver

  • Oracle 11g : Sequence Issues after impdp

    Hi All,
    We are migrating from Oracle 10g to Oracle 11g. As part of this, we take a expdp from 10g and successfully did an import using impdp on to Oracle 11g database.
    But the problem is, there were few Primary key violations which occurred and all of them relate to sequences.
    The Maximum data in the tables and the last number in the sequences differed which caused the issue.
    Upon investigation and browsing the Web, http://www.nerdliness.com/article/2009/03/18/my-oracle-sequencedatapump-shenanigans ; I understood it could be because of the export taken while the application is online and writing to the database.
    I reset all the failing sequences manually and it is fine now.
    My questions now are
    *1) Can we ascertain that the export taken when the source database is offline would eliminate the sequences issue.*
    2) As this is being done in Production, I would like to make few checks to ensure that the sequences are properly imported. ---
    Again reading few websites and oracle Forums, i found the below sql's..
    select table_name, column_name, utl_raw.cast_to_number(high_value) as highval
    from dba_Tab_columns
    where owner = 'PRODUCTION_OWNER'
    AND DATA_TYPE= 'NUMBER'
    AND (OWNER, TABLE_NAME, COLUMN_NAME) IN
    (SELECT CC.OWNER, CC.TABLE_NAME, CC.COLUMN_NAME
    FROM DBA_CONS_COLUMNS CC
    JOIN DBA_CONSTRAINTS C
    ON CC.OWNER=C.OWNER
    AND CC.CONSTRAINT_NAME=C.CONSTRAINT_NAME
    WHERE C.CONSTRAINT_TYPE ='P'
    ORDER BY 3;
    SELECT SEQUENCE_NAME, MIN_VALUE, MAX_VALUE, LAST_NUMBER
    FROM DBA_SEQUENCES
    WHERE SEQUENCE_OWNER = 'PRODUCTION_OWNER'
    ORDER BY LAST_NUMBER
    If I relate the last_number with the highval and if they are same, does that mean the sequences are imported properly.
    Note: We have sequence caching done and we are on RAC.
    Edited by: ramakrishnavydyula on Jan 30, 2013 9:36 AM

    We are migrating from Oracle 10g to Oracle 11g. As part of this, we take a expdp from 10g and successfully did an import using impdp on to Oracle 11g database.
    But the problem is, there were few Primary key violations which occurred and all of them relate to sequences.
    The Maximum data in the tables and the last number in the sequences differed which caused the issue.
    it could be because of the export taken while the application is online and writing to the database.I don't know what's your database's size , and what's acceptable downtime for you, but I could never propose such a migration tecnique to any of my customers, due to excessive downtime when databases are quite large.
    It's quite obvious that you get such errors when the export is done while people are working, unless you use FLASHBACK_SCN or FLASHBACK_TIME parameter while exporting. But in this case, assuming you don't get errors (e.g. ORA-01555), you'll probably lose a lot ot transactions.
    Assuming your 10g database is running in archivelog mode (which should be the default in production DBs) did you think of using RMAN to do the migration ?

  • Oracle 11g R2 Grid Control Installation on AIX 6

    hi,
    is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
    Thanx & Regards

    user13672598 wrote:
    hi,
    is there any good guide for installing Oracle 11g R2 Grid Control on AIX 6/5...I'll be thankful to you...
    Thanx & RegardsHi
    Grid Control is only available in 11GR1.
    I have an installation walkthrough on my Blog. It is on http://managingoracle.blogspot.com in the section September 2010
    There are more related Blog entries also.
    Success!!
    FJFranken
    Edit: P.S. Welcome to this Forum
    Edited by: fjfranken on 11-jan-2011 6:18

  • Oracle 11g R2 hangs after parameter processes incresed

    Hi,
    I am running an Oracle 11g R2 on a Solaris box. I was getting some Critical alert messages about the "Process Limit %" metric. So I decided to increase the value of the processes database parameter from 200 to 400. After that the system is very slow and hanging with a lot of "Log file sync" and "log file parallel write" events.
    I have rolled it back to 200 and now the system is working fine again, but I am concern about getting again the alert about the "process limit %".
    Is there any other parameter that I need to tune together with the increase of the proccesses on?
    Regards,

    It looks like the issue is not related with the processes change.
    If I reboot then db and then restart the process it runs fine. Something happens during on the db during the day that make the nightly schedule task takes forever. When I checked it this morming there were a lot of commit activity. If I cancel the process and then try to restart it again without rebooting the db the problem persist. But if I bounce the database and then run it, it will complete fine.
    Below is AWR periord comparisson report. The first period is when I cancelled the process and then tried to run it again. The second one is after the database reboot.
    I appreciate any advice.
    Snapshot Set DB Name DB Id Instance Inst num Release Cluster Host Std Block Size
    First (1st) DMFEPRD 3155815743 dmfeprd 1 11.2.0.1.0 NO uscndb18 8192
    Second (2nd) DMFEPRD 3155815743 dmfeprd 1 11.2.0.1.0 NO uscndb18 8192
    Snapshot Set Begin Snap Id Begin Snap Time End Snap Id End Snap Time Avg Active Users Elapsed Time (min) DB time (min)
    1st 2700 25-Jun-11 12:17:51 (Sat) 2701 25-Jun-11 12:23:40 (Sat) 2.69 5.82 15.65
    2nd 2702 25-Jun-11 12:47:17 (Sat) 2703 25-Jun-11 12:52:52 (Sat) 2.40 5.58 13.39
    %Diff -10.78 -4.12 -14.44
    Host Configuration Comparison
    1st 2nd Diff %Diff
    Number of CPUs: 32 32 0 0.0
    Number of CPU Cores: 4 4 0 0.0
    Number of CPU Sockets: 1 1 0 0.0
    Physical Memory: 65408M 65408M 0M 0.0
    Load at Start Snapshot: 6.14 2.03 -4.12 -66.9
    Load at End Snapshot: 6.95 4.67 -2.28 -32.8
    %User Time: 13.43 13.04 -.38 -2.9
    %System Time: 6.95 1.26 -5.69 -81.9
    %Idle Time: 79.62 85.7 6.07 7.6
    %IO Wait Time: 0 0 0 0.0
    Cache Sizes
    1st (M) 2nd (M) Diff (M) %Diff
    Memory Target 10,240.0 10,240.0 0.0 0.0
    .....SGA Target 6,656.0 6,656.0 0.0 0.0
    ..........Buffer Cache 672.0 672.0 0.0 0.0
    ..........Shared Pool 1,472.0 1,472.0 0.0 0.0
    ..........Large Pool 64.0 64.0 0.0 0.0
    ..........Java Pool 224.0 224.0 0.0 0.0
    ..........Streams Pool 64.0 64.0 0.0 0.0
    .....PGA Target 3,584.0 3,584.0 0.0 0.0
    Log Buffer 18.6 18.6 0.0 0.0
    Load Profile
    1st per sec 2nd per sec %Diff 1st per txn 2nd per txn %Diff
    DB time: 2.69 2.40 -10.78 0.96 0.14 -85.42
    CPU time: 0.90 2.13 136.67 0.32 0.12 -62.50
    Redo size: 28,238.40 149,564.99 429.65 10,057.71 8,577.01 -14.72
    Logical reads: 8,840.64 21,941.38 148.19 3,148.78 1,258.26 -60.04
    Block changes: 176.06 1,032.02 486.18 62.71 59.18 -5.63
    Physical reads: 1.82 37.36 1,952.75 0.65 2.14 229.23
    Physical writes: 6.69 25.16 276.08 2.38 1.44 -39.50
    User calls: 118.44 318.49 168.90 42.19 18.26 -56.72
    Parses: 91.31 492.38 439.24 32.52 28.24 -13.16
    Hard parses: 4.73 31.89 574.21 1.68 1.83 8.93
    W/A MB processed: 908,952.26 4,708,929.40 418.06 323,742.82 270,039.92 418.06
    Logons: 18.65 41.19 120.86 6.64 2.36 -64.46
    Executes: 109.63 584.01 432.71 39.05 33.49 -14.24
    Transactions: 2.81 17.44 520.64
    1st 2nd Diff
    % Blocks changed per Read: 1.99 4.70 2.71
    Recursive Call %: 84.16 92.70 8.53
    Rollback per transaction %: 0.00 0.00 0.00
    Rows per Sort: 1,620.17 1,194.14 -426.02
    Avg DB time per Call (sec): 0.02 0.01 -0.02

  • Word for Mac error after installation of Mavericks

    When trying to open Word after installation I receive error message. Help

    Bashkins wrote:
    When trying to open Word after installation I receive error message. Help
    What version of Word (Office) and what is the message?
    Pete

  • Oracle 11g R2 Grid Infrastructure Installation stuck on 65%

    Dear All,
    I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
    Many Thanks
    Nukesh

    No nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
    Actually I found/resolved the problem and forgot about this post.
    It happens that in staging my server, iptables was enabled which stopped the progress.
    I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
    Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
    Thanks

  • Multiple Errors After Installation

    I have the following errors and several programs were not installed. Please advise.
    Thank you,
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DF012, DW064 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 13 error(s), 3 warning(s)
    WARNING: DW064: Memory requirements not met for {3D46121C-A0E6-4259-B7E0-5127C218A096} Adobe SpeedGrade CS6 6.0.0.0
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80070091.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80070091.
    ----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\Users\Dr. Aguilar\Downloads\CS6 Master Collection\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
    ----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at C:\Users\Dr. Aguilar\Downloads\CS6 Master Collection\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe Player for Embedding 3.201: Install failed
    ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050: - Suite Shared Configuration CS5.5: Install failed
    ERROR: DW050: - Adobe Flash Builder 4.6: Install failed
    ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
    ERROR: DW050: - AdobeTypeSupport CS5: Install failed
    ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
    ERROR: DW050: - Microsoft_VC90_MFCLOC_x86: Install failed
    ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
    ERROR: DW050: - AdobeCMaps CS5: Install failed
    ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed

    Read the system requirements for the programs. Half your errors are probably because your system doesn't meet the specs. That aside, simply start over:
    Creative Suite Cleaner Tool
    Errors "Exit Code: 6," "Exit Code: 7"
    Error 1935
    Error 1603
    Mylenium

  • During the installation of the rpm package of Oracle 11g XE,  Error occur "cpio:digest mismatch"

    It is not possible to install the following error occurs.
    [root @ localhost Disk1] # rpm -ivh --nodigest oracle-xe-11.2.0-1.0.x86_64.rpm
    preparing... ################################# [100%]
    Updating / Installing ...
        1: oracle-xe-11.2.0-1.0 ################################# [100%]
    error : fails to extension of the archive : File /u01/app/oracle/product/11.2.0/xe/bin/oracle;54091d3a: cpio: Digest mismatch
    Error: oracle-xe-11.2.0-1.0.x86_64: Installation failed
    Error "Digest mismatch" will have occurred from the very beginning,
    I tried to specify the installation options "--nodigest".
    But Phenomenon does not improve.
    I tried to check the version of the rpm package.
    It seems the latest version of rpm-4.11.2-2.fc20.x86_64.
    Would you have a good workaround?
    Installation OS: fedora20 64bit
    Installation package: oracle-xe-11.2.0-1.0.x86_64.rpm
    メッセージ編集者: user10993108
    Has been translated into English.

    This is a global forum - you will have to post in English. There are alternate language forums available - Other Languages
    Looks like your OS is Fedora - which is not a supported/certified OS for 11g XE - Oracle® Database Express Edition
    So things may or may not work as expected.

  • OIPM 11g - EBIZ Error after logging to OIPM Console

    Hi All,
    We are trying to integrate OIPM 11g and Ebiz R12, when we click on zoom button at Ebiz we can open OIPM URL we are logging as admin user after logging we can see error console with only error msg as Error ID : xxxxxxx and Pls contact Sys Admin with error id.
    Thanks in Advance,
    Rakesh.

    Hi,
    below is axf.log file content -
    ===========================================================================================
    [2011-11-16T12:54:56.310+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-00000000000008ff,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCacheLoader] [APP: imaging] [SRC_METHOD: load] Searching for object in distributed cache with id: 43e2f5d1-acfe-4ff7-8044-5bcfe9dc0efe
    [2011-11-16T12:54:56.360+05:30] [IPM_server1] [ERROR] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-00000000000008ff,0] [APP: imaging] TCM-91006: System cache failure[[
    oracle.imaging.axf.resources.AxfException: oracle.ias.cache.ObjectNotFoundException:
    J2EE JOC-044 An exception is occurring in the method. CacheAccess.get
    J2EE JOC-037 cannot find the following object"43e2f5d1-acfe-4ff7-8044-5bcfe9dc0efe"
         at oracle.imaging.axf.service.AxfSessionManagerBean.lookupConversation(AxfSessionManagerBean.java:209)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
         at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
         at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy271.lookupConversation(Unknown Source)
         at oracle.imaging.axf.service.AxfSessionManager_q0dxu8_AxfSessionManagerLocalImpl.__WL_invoke(Unknown Source)
         at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
         at oracle.imaging.axf.service.AxfSessionManager_q0dxu8_AxfSessionManagerLocalImpl.lookupConversation(Unknown Source)
         at oracle.imaging.axf.service.AxfSolutionMediatorBean.acquireCid(AxfSolutionMediatorBean.java:245)
         at oracle.imaging.axf.service.AxfSolutionMediatorBean.execute(AxfSolutionMediatorBean.java:80)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
         at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
         at oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_AxfSolutionMediatorRemoteImpl.__WL_invoke(Unknown Source)
         at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
         at oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_AxfSolutionMediatorRemoteImpl.execute(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
         at $Proxy142.execute(Unknown Source)
         at oracle.imaging.axf.ws.AxfSolutionMediatorWS.execute(AxfSolutionMediatorWS.java:55)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
         at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
         at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
         at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
         at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
         at weblogic.wsee.jaxws.security.AuthorizationTube$RunAsWrapperTube$1.run(AuthorizationTube.java:291)
         at weblogic.wsee.jaxws.security.AuthorizationTube$RunAsWrapperTube$1.run(AuthorizationTube.java:289)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAs(Subject.java:337)
         at weblogic.wsee.jaxws.security.AuthorizationTube$RunAsWrapperTube.processRequest(AuthorizationTube.java:288)
         at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
         at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
         at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
         at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
         at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
         at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
         at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
         at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
         at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:171)
         at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    Caused by: oracle.ias.cache.ObjectNotFoundException:
    J2EE JOC-044 An exception is occurring in the method. CacheAccess.get
    J2EE JOC-037 cannot find the following object"43e2f5d1-acfe-4ff7-8044-5bcfe9dc0efe"
         at oracle.ias.cache.CacheAccess.get(CacheAccess.java:713)
         at oracle.imaging.axf.service.AxfSessionManagerBean.lookupConversation(AxfSessionManagerBean.java:199)
         ... 113 more
    [2011-11-16T12:55:27.559+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: execute] ENTRY oracle.imaging.axf.data.AxfRequest@60812843
    [2011-11-16T12:55:27.562+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCacheLoader] [APP: imaging] [SRC_METHOD: load] Searching for object in distributed cache with id: 8475f9b4-5137-48aa-a70f-22aa1c204eb6
    [2011-11-16T12:55:27.563+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCacheLoader] [APP: imaging] [SRC_METHOD: load] Recieved new Object, putting in cache: 8475f9b4-5137-48aa-a70f-22aa1c204eb6
    [2011-11-16T12:55:27.565+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediatorBean] [APP: imaging] [SRC_METHOD: acquireCid] Got a new conversation from SessionManager with a CID of:8475f9b4-5137-48aa-a70f-22aa1c204eb6
    [2011-11-16T12:55:27.948+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSessionManager_q0dxu8_Impl] [APP: imaging] [SRC_METHOD: createParameterSet] ENTRY 8475f9b4-5137-48aa-a70f-22aa1c204eb6
    [2011-11-16T12:55:27.949+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSessionManagerBean] [APP: imaging] [SRC_METHOD: createParameterSet] New ParameterSet PID=f1fac57f-e9da-4adb-883c-99fd65a05682
    [2011-11-16T12:55:27.951+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSessionManagerBean] [APP: imaging] [SRC_METHOD: addParameterSet] Putting ParameterSet in cache
    [2011-11-16T12:55:27.952+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCacheLoader] [APP: imaging] [SRC_METHOD: load] Searching for object in distributed cache with id: f1fac57f-e9da-4adb-883c-99fd65a05682
    [2011-11-16T12:55:27.953+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCacheLoader] [APP: imaging] [SRC_METHOD: load] Recieved new Object, putting in cache: f1fac57f-e9da-4adb-883c-99fd65a05682
    [2011-11-16T12:55:27.956+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSessionManagerBean] [APP: imaging] [SRC_METHOD: updateParameterSet] Putting ParameterSet in cache
    [2011-11-16T12:55:27.958+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.config.AxfConfigurationUtil] [APP: imaging] [SRC_METHOD: getWebRoot] ENTRY
    [2011-11-16T12:55:27.960+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 11] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-000000000000090b,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: execute] RETURN CID:     8475f9b4-5137-48aa-a70f-22aa1c204eb6[[
    Response Commands {
         OPEN_BROWSER :      http://10.15.16.140:16000/imaging/CommandAuthenticatorFacade.jsp?cid=8475f9b4-5137-48aa-a70f-22aa1c204eb6&pid=f1fac57f-e9da-4adb-883c-99fd65a05682
    [2011-11-16T12:55:43.051+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: execute] ENTRY oracle.imaging.axf.data.AxfRequest@2009cd0c
    [2011-11-16T12:55:43.052+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediatorBean] [APP: imaging] [SRC_METHOD: acquireCid] Requestor provided a CID of: 8475f9b4-5137-48aa-a70f-22aa1c204eb6
    [2011-11-16T12:55:43.054+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediatorBean] [APP: imaging] [SRC_METHOD: acquireCid] Sucessfully retrieved cached conversation: 8475f9b4-5137-48aa-a70f-22aa1c204eb6
    [2011-11-16T12:55:43.057+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: expandRequest] ENTRY oracle.imaging.axf.data.AxfRequest@2009cd0c
    [2011-11-16T12:55:43.090+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: lookupSolution] ENTRY ejb.AxfCommandMediator#oracle.imaging.axf.service.AxfCommandMediatorRemote
    [2011-11-16T12:55:43.090+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediatorBean] [APP: imaging] [SRC_METHOD: lookupSolution] Got a solution with a name of: ejb.AxfCommandMediator#oracle.imaging.axf.service.AxfCommandMediatorRemote
    [2011-11-16T12:55:43.099+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediatorBean] [APP: imaging] [SRC_METHOD: lookupSolution] lookup of ejb.AxfCommandMediator#oracle.imaging.axf.service.AxfCommandMediatorRemote was sucessful!
    [2011-11-16T12:55:43.101+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: lookupSolution] RETURN [BaseRemoteObject] home: weblogic.ejb.container.internal.StatelessEJBHomeImpl@60bfd2f5
    [2011-11-16T12:55:43.121+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCommandMediator_kr0fzi_Impl] [APP: imaging] [SRC_METHOD: execute] ENTRY oracle.imaging.axf.data.AxfRequest@2009cd0c
    [2011-11-16T12:55:43.123+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCommandMediator_kr0fzi_Impl] [APP: imaging] [SRC_METHOD: executePojoCommand] ENTRY oracle.imaging.axf.data.AxfRequest@2009cd0c
    [2011-11-16T12:55:43.123+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCommandMediatorBean] [APP: imaging] [SRC_METHOD: executeCommand] querying for commandNamespace (UCM_Managed_Attachments, UCM_Managed_Attachments)
    [2011-11-16T12:55:43.223+05:30] [IPM_server1] [TRACE] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfCommandMediatorBean] [APP: imaging] [SRC_METHOD: executeCommand] Trying to instantiate new instance using: oracle.imaging.axf.commands.ucm.AfGrantAccessCommand
    [2011-11-16T12:55:43.295+05:30] [IPM_server1] [ERROR] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [APP: imaging] SolutionParameter not found for: SolutionNamespace=UCM_Managed_Attachments, CommandNamespace=UCM_Managed_Attachments, ConfigurationNamespace=oracle.imaging.axf.commands.ucm.AfGrantAccessCommand, ParameterKey=UCM_CONNECTION_STR[[
    oracle.imaging.axf.resources.AxfException
         at oracle.imaging.axf.commands.ucm.AfGrantAccessCommand.execute(AfGrantAccessCommand.java:136)
         at oracle.imaging.axf.service.AxfCommandMediatorBean.executeCommand(AxfCommandMediatorBean.java:107)
         at oracle.imaging.axf.service.AxfCommandMediatorBean.execute(AxfCommandMediatorBean.java:66)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at.......
         at oracle.imaging.axf.service.AxfCommandMediator_kr0fzi_AxfCommandMediatorRemoteImpl.__WL_invoke(Unknown Source)
         at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
         at oracle.imaging.axf.service.AxfCommandMediator_kr0fzi_AxfCommandMediatorRemoteImpl.execute(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
         at $Proxy143.execute(Unknown Source)
         at oracle.imaging.axf.service.AxfSolutionMediatorBean.execute(AxfSolutionMediatorBean.java:139)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
         at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
         at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
         at oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_AxfSolutionMediatorLocalImpl.__WL_invoke(Unknown Source)
         at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(SessionLocalMethodInvoker.java:39)
         at oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_AxfSolutionMediatorLocalImpl.execute(Unknown Source)
         at oracle.imaging.axf.web.CommandAuthenticator.execute(CommandAuthenticator.java:77)
         at oracle.imaging.axf.web.CommandAuthenticator.<init>(CommandAuthenticator.java:56)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at oracle.adfinternal.controller.beans.ManagedBeanFactory.newInstance(ManagedBeanFactory.java:187)
         at oracle.adfinternal.controller.beans.ManagedBeanFactory.instantiateBean(ManagedBeanFactory.java:873)
         at oracle.adfinternal.controller.application.ManagedBeanELResolver.getValue(ManagedBeanELResolver.java:112)
         at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:173)
         at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:200)
         at com.sun.el.parser.AstIdentifier.getValue(Unknown Source)
         at com.sun.el.parser.AstValue.getValue(Unknown Source)
         at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
         at com.sun.faces.application.ApplicationImpl.createComponent(ApplicationImpl.java:250)
         at javax.faces.webapp.UIComponentELTag.createComponent(UIComponentELTag.java:222)
         at javax.faces.webapp.UIComponentClassicTagBase.createChild(UIComponentClassicTagBase.java:513)
         at javax.faces.webapp.UIComponentClassicTagBase.findComponent(UIComponentClassicTagBase.java:782)
         at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1354)
         at org.apache.myfaces.trinidad.webapp.UIXComponentELTag.doStartTag(UIXComponentELTag.java:71)
         at oracle.adfinternal.view.faces.unified.taglib.layout.UnifiedPanelStretchTag.doStartTag(UnifiedPanelStretchTag.java:50)
         at jsp_servlet.__commandauthenticator_jspx._jspx___tag3(__commandauthenticator_jspx.java:244)
         at jsp_servlet.__commandauthenticator_jspx._jspx___tag2(__commandauthenticator_jspx.java:205)
         at jsp_servlet.__commandauthenticator_jspx._jspx___tag1(__commandauthenticator_jspx.java:155)
         at jsp_servlet.__commandauthenticator_jspx._jspx___tag0(__commandauthenticator_jspx.java:104)
         at jsp_servlet.__commandauthenticator_jspx._jspService(__commandauthenticator_jspx.java:65)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    [2011-11-16T12:55:43.315+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.config.AxfConfigurationUtil] [APP: imaging] [SRC_METHOD: getWebRoot] ENTRY
    [2011-11-16T12:55:43.321+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.service.AxfSolutionMediator_xc27sg_Impl] [APP: imaging] [SRC_METHOD: execute] RETURN CID:     8475f9b4-5137-48aa-a70f-22aa1c204eb6[[
    Error Code:      TCM-91001
    Response Commands {
         OPEN_BROWSER :      http://10.15.16.140:16000/imaging/faces/Message/Message.jspx?errorId=987678c8-2879-4524-be10-94597044a267
    [2011-11-16T12:55:43.326+05:30] [IPM_server1] [TRACE:16] [] [oracle.imaging.axf] [tid: 12] [userId: weblogic] [ecid: e8d7c9667455de58:4aea3db5:133ab40b9c2:-8000-0000000000000921,0] [SRC_CLASS: oracle.imaging.axf.view.management.AxfSessionUtil] [APP: imaging] [SRC_METHOD: executeClientScript] Executing client script: document.location="http://10.15.16.140:16000/imaging/faces/Message/Message.jspx?errorId=987678c8-2879-4524-be10-94597044a267";
    ===========================================================================================
    Thanks in Advance,
    Rakesh.

Maybe you are looking for