Oracle 11g ODAC 11.1.0.6.21 on Windows 2008 Standard server gives TNS error
Hi,
I have Oracle 11g ODAC 11.1.0.6.21 installed on my Application server that has 32 bit Windows 2008 Standard. The Oracle database 10g is installed on another 2008 server. On database server I can connect using SQLPlus. But on application server I cannot connect using ODAC SQLPlus. I have given correct service name in tnsnames.ora file.
Error is ORA-12154 TNS: Listener cannot resolve service name
What's wrong? Is 11.1.0.6.21 not meant for Windows 2008? I did not get any errors while installing.
This 11.1.0.6.21 works perfectly for me on XP machine.
I have browsed this forum but not getting clear steps to peform.
Can someone guide me what is needed?
Thanks
Shrini
Hi,
The request to connect from the client is reaching the server but it seems the parsing of the service name is either wrong or the information is correct. Here are a couple of suggestions.
If you have a good known set of sqlnet.ora and tnsnames.ora files on another client where the same connection descriptor works, then backup the curreny client network config files and copy the good known files to the Windows 2008 web server where you see the error. Make sure you recycle the worker processes once the files have been copied.
Try to connect via Ezconnect and by pass the config files to see if you get the same error.
//hostname:port/servicenameofdb
where hostname is the machine where the target database is running
port is the port on the DB machine where the tns listener is running and listening
service name is the service name of the target DB
Use this syntax in the connect string box when attempting to connect from SQL PLUS out of the ODAC home.
You can also run lsnrctl utility on the server and vertify there is a handler for the service name or instance that is the target,
HTH
Jenny B.
Similar Messages
-
Tns problem with Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools
I installed the full
Oracle 11g ODAC 11.1.0.6.21 with Oracle Developer Tools for Visual Studio
now I am at the good old "[ORA-12154: TNS:could not resolve the connect identifier specified]" error.
I copied the same tnsnames.ora as used on the db server
onto the client "C:\Oracle\product\11.1.0\client_2\Network\Admin".
The host name is right since a normal ping works. TNSping is not available.
but I get the [ORA-12154: TNS:could not resolve the connect identifier specified] error.
The listener is running and the instance as well since it all works on the source server.
I tried it with
SET path=c:\oracle\product\11.1.0\client_2\bin
but tnsping is still not recognized.
sqlplus works on the other hand when I set it to
SET path=c:\oracle\product\11.1.0\client_2\
what is going on...hey
u can post your query here, and i think everyone here is to share opinion so do not hesitate to do so and please try to google before posting here,
and we know no one is expert like some people saying 'boring questions' you just try to overcome your problem and you will definitly get your problem solved .
some mpeople ar still there who answeres hopeless questions and say nothing about them but when a fresher askin a qustion is not tolarated by them they think everyone is born DBA here
they always tend to discouraging people here on forums,and i think they are vvolunteers to reduce crowd here on forums, inspite of there experience and people respect them they can not control their anger
so please post you tns here, i think there are ways to ask people to google and search docs first, but not like this
thanks and regards
VD
Edited by: vikrant dixit on Jun 29, 2009 4:33 AM -
Installing Oracle 11g ODAC 11.1.0.5.10 Beta
I've installed Oracle 11g ODAC 11.1.0.5.10 Beta.
It came back with installation successful.
How do I get the Oracle Database Server(Oracle ODP.NET) to appear as one of my datasource choices?
I added the Oracle.DataAccess.dll (v. 2.111.5.10) to my bin folder. I restarted VS2005, dropped a gridview on the page, selected NewDatasource. My only options are for Microsoft.This step by step tutorial should help you out:
http://www.oracle.com/technology/obe/net11gobe/building.net/vs_otn2.htm
There are parts of the tutorial that you can skip since you are only interested in ODP.NET showing up as a data source and using it within a gridview. -
A simple question about Oracle 11g ODAC XCopy version
There is no oracle client on my machine , I have seen Oracle 11g ODAC XCopy version on http://www.oracle.com/technology/software/tech/windows/odpnet/index.html
its size is only 43m , quite small,what i want to know is :
Do i have to install any oracle client to devolop program with Oracle 11g ODAC XCopy version ?
i have seen the Oracle 11g ODAC XCopy version contains Oracle Instant Client 11.1.0.6.0 as follows:
ODAC1110621Xcopy.zip 43.3 MB (45,461,502 bytes)
Download Includes :
Oracle Providers for ASP.NET 11.1.0.6.20
Oracle Data Provider for .NET 2.0 11.1.0.6.20
Oracle Data Provider for .NET 1.x 11.1.0.6.20
Oracle Provider for OLE DB 11.1.0.6.20
Oracle Objects for OLE 11.1.0.6.20
Oracle Services for Microsoft Transaction Server 11.1.0.6.0
Oracle Instant Client 11.1.0.6.0
help ,please!I've solved this problem ,:)
-
Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2
Hi All,
Subject: Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2 operating system.
I am looking for Oracle 10.2.0.5 software to install in windows 2008 server (64 bit) R2. I tried with oracle download repository but unfortunately I couldnt find this software. In the below link I can see the product Oracle 10.2.0.5 - 64 bit (Itanium). I have tried to download and install in the server but I received in-compatible error message.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
From the oracle support certification site I have found that the Oracle 10.2.0.5 is the compatible version to installed in windows 2008 server(64) R2.
I am trying very hard to find Oracle 10.2.0.5 - 64 bit. Can you please suggest me where I can download this software.
Please do the needful.
Regards,
JameHi;
Which means, do i need to install 10.2.0.4 and then to upgrade 10.2.0.5 using patchset?10.2.0.1 is base relase 10.2.0.x is patchest. 10.2.0.5 cover previous patchest errors which mean you do not need install 10.2.0.4 than upgrade it 10.2.0.5
Regard
Helios -
Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2
Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2?
Thanks,DES is disabled by default on 2008, could this DC be a Windows 2003? If so then this would be the expected encyption.
The following is the list of the encryption available for each Windows system
Windows 2000, XP,Windows Server 2003:
DES, RC4
Vista
, Windows Server 2008: DES, RC4,AES
Windows 7 and Windows Server 2008 R2: DES(disabled by default), RC4,AES
From:
http://blogs.msdn.com/b/openspecification/archive/2010/11/17/encryption-type-selection-in-kerberos-exchanges.aspx
Paul Bergson
MVP - Directory Services
MCITP: Enterprise Administrator
MCTS, MCT, MCSE, MCSA, Security, BS CSci
2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
Please no e-mails, any questions should be posted in the NewsGroup.
This posting is provided AS IS with no warranties, and confers no rights. -
Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PMuser2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Oracle 11g software setup file needful to install on windows 7
Hi,
Any body Can provide the download link for oracle 11g software setup to install on windows 7.Hi;
You can find related setup at below link:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
By the way dont forget win7 home edition not certified wiht Oracle 11g
Installation guide is avaliable at:
http://download.oracle.com/docs/cd/E11882_01/install.112/e10876/toc.htm#BABEHGHH
Regard
Helios -
Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine
Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
RiziHi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios -
Can't seem to find oracle native 32-bit cleint for a 64-bit Windows 2008 op
Hi,
We have a Windows 2008 server (64-bit) and have installed oracle 64-bit client on there.
Have a third party application which is usggesting need also a 32-bit oracle native client.
Had a look on otn but can't seem to find. For 64-bit o/s can only see 64-bit oracle client.
Any ideas/links much appreciated.
ThanksHi,
It seems there is a 32 bit client and a 64 bit client.
We have a 64 bit operating system. (MS Windows 2008 SERVER).
Is it correct theses are the only2 versions of the client a 32bit client and a 64 bit client and the operating system is irrelevant.
i.e. no 32 bit client for 32 bit operating system operating and 32 bit client for 64 bit operating system?
Thanks -
Oracle Client for Windows 2008 R2 server to connect to Oracle database 9iR2
Hi,
We are running Oracle 9.2.0.7 on Sun solaris (64 Bit) 5.10 and trying to install client on new Windows 2008 R2 (64 - bit) server. (Before this 2008 R2 we were using Windows 2003 32 bit and 9iR2 client was working great.) I can't install 9iR2 clinet and I tried installing 10gR1, 10gR2 and 11gR1 but none of them worked. It is only allowing me to install 11gR2. When I installed 11gR2 client I am getting some 'overflow exception on an arithmetic operation' error.
1.) Do I have any choice for client installation or only 11gR2?
2.) Any solution for overflow error?
Thanks,
-HMay I know the reason why ODBC driver is not include in option like Runtime?Oracle software utilizes SQL*Net (not ODBC) to connect to Oracle RDBMS.
ODBC is not required by Oracle client software to connect to Oracle RDBMS. -
Oracle Report Server gives java error message
Hi All,
We have an oracle report server (or service) in Oracle application server 10gR2 running in Red Hat Enterprise Linux 4.5. And it was working fine.
But recently it gives some error message in the terminal like below.
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
java.lang.Exception
at com.sun.corba.se.internal.iiop.IIOPConnection.cleanUp(IIOPConnection.java:903)
at com.sun.corba.se.internal.iiop.ConnectionTable.cleanUp(ConnectionTable.java:303)
at com.sun.corba.se.internal.iiop.ConnectionTable.checkConnectionTable(ConnectionTable.java:320)
at com.sun.corba.se.internal.iiop.ListenerThread.run(ListenerThread.java:75)
When I restart the report server it works fine for a while and the error message appears again.
Dear Experts,Please response early.Please check at http://<server>/dev60html/runrep.htm for follwings :
01. your test.rdf must be in report60 folder
02. your db must contain scott user
03. connect string must be tested and give the same inplace of test
04. your webhost may contain a dot, please check this should be the same as yours
hope this will help
bye ! -
Oracle 11g ODAC with Oracle 10g Database
Hi,
I am trying to work with SDO_GEOMETRY from .Net.
When selecting * to a DataSet exception is thrown - Unknown column type.
So, i saw that Oracle Data Provider for .NET 2.0 11.1.0.6.20 supports User Defined Types. My question is this:
If i will install only ODP 11.1.0.6.20, will my system still work with everything else from 10g version?
(It's very hard to convince bosses to transfer all DB to 11g just because of UDT, so it's not an option).
Thanks in advance,
MaxI also just discovered this thread:
Which version of ODT should I use?
That does it for me. -
I need to deploy location based service (Directory Service and Route Service). My database is in Oracle 11gR1 (Version 11.1.0.6.0). The application is deployed on Weblogic Server (Version 10.3.3.0).
When I try to deploy the sdows.ear file, I get the error regarding class (oracle.spatial.ws.logger) definition not found.
The examples \ tutorials that I have found are either for deployment of sdows.ear on OC4J Application Server or they correspond to Oracle 11gR2 database based sdows.ear deployment on Weblogic
Server. As I am new in this field and inexperienced developer, I am unable to understand the causes of such error.
May I humbly request for the solution at the earliest.
Thanking you in anticipation.
regards,
GVJHi,-
Sorry about the late reply.
We have patches for 11.2.0.3 and 12.1.0.1 database versions.
Please let me know if they will work for you.
Thanks -
This started with an install of Oracle Financials that failed and led me to the discovery that I can't even install a generic database on this machine, the two issues are certainly related.
Why would I get this failure on a clean install???
Is there a problem with the computer being a domain controler or called Sampson-II ?
Thanks in advance.Hardware Xeon processor 8 G of memory
Runing db as 32 byte
Software Windows server 2008 SP2
I'm not seeing any conflict with other prerequisites or tasks that need to be executed before the install is done.
The listener installs but when the database is to be installed, it fails.
Below is the install log. Your assistance is greatly appreciated.
INFO: This variable varSelect is not added to the global context map
INFO: This variable s_dbcaClasspath is not added to the global context map
INFO: This variable s_odmaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the OracleHome E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=true $*
INFO: The runConfig command is
E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands.bak
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools3
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Database 11g current size: 1
INFO: No of ExitOnly Tools in this session: 1
INFO: cf session for perform has hashcode: 20767108
INFO: detached tool list getting prepared fo comp: Oracle Database 11g
INFO: cfsession hashcode for exit only tools: 20767108
INFO: hashcode for action: 11062616
INFO: No of ExitOnly Tools: 1
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/netca.bat /orahome E:\app\Administrator\product\11.1.0\db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\app\Administrator\product\11.1.0\db_1\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\app\Administrator\product\11.1.0\db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\app\Administrator\product\11.1.0\db_1\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
E:\app\Administrator\product\11.1.0\db_1\bin\lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Setting Listener service to start automatically.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 1638 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
INFO: The OUICA command is launched from E:\app\Administrator\product\11.1.0\db_1\oui\bin\ouica.bat.
The installation of Oracle Database 11g was successful, but some configuration assistants failed, were cancelled or skipped.
Maybe you are looking for
-
VGA adapter splitter? 1 external monitor for desktop and macbook
I recently bought the Apple VGA adapter and it works great with my macbook and external monitor. However I use that same external monitor with my desktop PC. It's becoming a pain to constantly unscrew and plug out the VGA cable. So I'm trying to find
-
I have just got a new macbook pro and want my itunes library on it.
hi, i have just got a new macbook pro and set it all up apart from my itunes library. yesturday i tried plugging in my ipad and iphone but this didnt work. i have tried clicking homeshare and have it turned on on both of my laptops but my itunes libr
-
SOAP Adapter - Error because of special character (u00FC - Umlaut) in payload
Hello, We have a SOAP sync scenario. SAP -> PI 7.0 -> 3rd Party system We have a special character (ü - Umlaut) as part of the payload. When the message enters message pipeline in PI, I can see the payload XML till message branching step. From Messag
-
Standalone ITS 6.20 support?
How long do you expect that standalone ITS 6.20 will be supported? I know that the FAQ says "long term" but it said that the integrated ITS in 6.40 will only be supported through 2009. We're hearing that standalone ITS 6.20 is "going away". Can
-
Assigned a QoS profile based on client identity
A client can be assigned a QoS profile based on its identity, through AAA, but how?