Oracle 11g R2 Windows Installation issue

Hey everybody,
i was trying to install Oracle 11g R2 on a Windows Server 2008 64-bit machine. During the installation i am getting an error message multiple times (about 20 times) where it says it cannot find certain files like C:\app\ora11g\product\11.2.0\dbhome_1\oc4j\j2ee\oc4j_applications\WFMLRSVCApp.ear and some other files too. If i click move on in the dialog box each time an error occurs the installation will succeed and finish successfully.
What am I doing wrong, do I have to change anything before installation starts?
I am using the correct 64-bit installation files i downloaded from the Oracle homepage...
Edited by: user12266335 on 07.04.2010 05:32

SKramer_MuM wrote:
Hi Hans,
know I found where it contains the information about the downloads. It only shows up when you click on the "See All", but it won´t show up if you directly download via the Disk 1 or Disk 2 link on the download page. Good point. I never would have believed noobs would stop at that page and not be curious about what other stuff might be available under 'See All'. Stuff like the 'De-install' package.
Since you didn't do it, I posted a comment/suggestion in the Download forum to put an additional note on the top 11gR2 download page.
What brings up more confusion is when you click on the "See All" button next to the download for the 32-bit Version of 11g R2 for Windows an error comes up. Worked for me.
You reported your error ... where?
So I think Oracle needs to improve its homepage a lot...If you have ideas there is a forum "Forum Home » Technology Network Community » Community Feedback and Suggestions" in which you you are welcome to submit comments.

Similar Messages

Oracle 11g R2 Windows Installation hangs at 100%

hi ,
I am trying to install oracle 11g server on a laptop with windows xp sp3 - 32 bit.
the installation goes smoothly till 100% and then get stuck at stage:
spawning 'D:\app\sujrai\product\11.2.0\dbhome_2\ODP.NET\bin\2.x\OraProvCfg.exe /action:config /product:odp /frameworkversion:v2.0.50727 /productversion:2.112.1.0'
I tried few times but it fails over and over again at this same stage. I am instaling in d:/ drive
Never faced this issue before. Would appreciate any comments on this.
thanks

Hi;
Please check log file for details. What is your xp version? Home version is not supported
Regard
Helios

Oracle 11g FREE download installation issues

I am installing this database on an HP Pavilion Desktop
I essentially have TWO (2) issues.
1st ISSUE
I was able to successfully run the setup.exe and my Oracle 11g is now installed.
When I go to start, programs, Oracle, Application Development, SQL Plus
it opens a windown for SQL plus, however, I am not able to do anything.
I followed the install instructions about setting up the ODBC drivers, however I still
can not get this to work. Would also like to know how to set access to this up as a desktop icon.
2nd ISSUE
Acording to the README..for the Oracle Enterprise Edition, I was only required to download
V20610-01 Part 1 of 2
V20610-01 Part 2 of 2
V20609-01
V20606-01
V19145-01
The Oracle Fusion Middleware download V18762-01 they said was OPTIONAL (O)
Because I was having problems with the install where it was coming up with errors about
not finding files, I downloaded ALL the ones from the list which were for 64bit INCLUDING Orcale Fusion Middleware.
Only then did my install work properly.
What I need to know is, on a desktop where I will be the only user,
IS THE ORACLE FUSION MIDDLEWARE REQIRED?
If NOT, and I completed the install, what will happen if I delete that folder (size is 11G)?
Please advise!
Edited by: user11925571 on Jul 15, 2010 8:31 AM

>
I am installing this database on an HP Pavilion Desktop ...
>
Which version of 11g ? What is the OS ? Assuming 11gR2 and Windows, pl confirm you meet or exceed the requirements for the install
http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#i1011417
HTH
Srini

Installing Oracle 11g on windows XP., after installation enterprize manager

Hello All,
kindly note that i am new to oracle and having a issue that i cant seem to figure out and hoping a experienced person can answer this.
i download oracle 11g for windows 32 bit on my laptop, go through the installation and use the option to crate a starter database.
meet all the pre- req and every thing goes smooth. database gets created, use sqlplus to connect ot the database also open the enterprise manager and and also see the GUI after logging in.
now what happens it works fine for a day or some times two and when i reboot the machine and go back and try to open the EM its gives me the error cant find the URL. i have tried it few times and it happens every time. i don't know what i am doing it wrong but for some reason the EM manager doesn't work . i can still log on the database using the sqlplus.
must thing must get changed ( may be the IP address or env some how). i really appreciate if some one can guide me in the right path.
Thanks in advance.

Thanks for the response,
well the laptop i am using is a work computer , i installed oracle so i can practice on it.. i Think the IP changes after a while. is that the reason?.. how can i remedy it do my EM works all the time?
Please advice.

About memory issue during installing Oracle 11g on Windows Server 2003

Hi, all
When I installed Oracle 11g on Windows Server 2003 which the server is a virtual server, Oracle only can detect 2G memory.
But there are 4G memory with my server.
I want to know if the Oracle 11g's new feature or the virtual server lead the issue.
Also , I want to get your help to resolve the issue, thanks a lot.

Let me get this straight:
You have created some virtual machine using someone's unknown VM software.
You have installed Windows Server 2003 (perhaps, but not confirmed 32-bit) to that VM.
You have allocated 4GB of memory to the VM (we guess ... not sure I'm ready to take your word on this)
You are attempting to install Oracle 11g (presumably 11gR1 32 bit for Windows) in the VM
And the Oracle (installer?) seems to be reporting that you only have 2GB RAM.
Since I personally have installed Oracle 11g 32bit for Windows on Windows 2003 server with 4GB RAM and had no issues, I would be investigating the (unknown) VM environment.

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

Error running universall installer using Oracle 11g on Windows server 2003

Hi,
I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
Checking swap space: 0 MB available, 500 MB required.
Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
Thanks,
Ant

Hi;
For swap problem, please check:
Swap space problem on Windows XP
http://www.pcnineoneone.com/howto/swpfile1.html
For remove process please check:
Oracle 11g on Windows Srv 2003
WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
Regard
Helios

Install Oracle 11g on windows 7 Home Premium?

All,
I'm trying to install Oracle 11g on windows 7 home premium edition? Is there any one installed successfully?

>
I'm trying to install Oracle 11g on windows 7 home premium edition? Is there any one installed successfully?
>
Do you have any specific issues with your installation? I don't see why you shouldn't be able to install Oracle 11g on Windows 7. Found a quick blog post for you:
http://mgrvinod.wordpress.com/2011/05/23/oracle11g-r2-on-windows7-home-premium-64bit/

Istalling oracle 11g on windows vista

Hi,
i need to install oracle 11g on windows vista, unfortunately i cannot able do to that, becase after double cliking on the setup a messege like this one came out:
OUI-10151: There was an error while loading library.generalQueries. Stop installation of all products, Stop installation on this component.
I've found on internet some work around of this problem BUT only on linux machine, no one as telling me some way to fix my problem on windows vista.
I also tried using oui to deinstall any previews installed version but oiu tell me that there's not any installation of oracle.
any suggest is really appreciate
regards
Francesco

By 11g I am assuming you mean 11.1.0.6 (11gR1). Pl post which Vista version you are using - 11gR1 is certified to be installed only on Business, Enterprise, and Ultimate editions.
http://download.oracle.com/docs/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
HTH
Srini

Oracle 11g on Windows XP

Hello All,
I recently downloaded a copy of Oracle 11g for windows and installed it on my windows xp laptop.
I was able to install it without issues but I am unable to create a new database!
A little digging around revealed that there are very less no. of configurable parameters in 11g.
And that we don't have sga_max_size/sga_target anymore! Instead we have memory_target.
But inspite of ensuring all these changes, I keep running to the "end of file on communication channel" error.
Am I missing something here? I am using more-or-less the same approach to creating a database manually, that I have used for 9iR2; 10gR2 .
Any advise will be appreciated.
-Anand

Hello All,
I tried BOTH dbca as well as Manual Create database statement.
I finally managed to locate the alert log file and found a bunch of ORA-7445 Core Dump errors.
Note: With oracle 11g the background_dump_dest parameter is ignored and the alert log location is defined by the DIAGNOSTIC_DEST parameter.
And it points to:
<ORACLE_BASE>\diag\rdbms\<SID>\<SID>\trace
Wed Jul 09 17:03:22 2008
Starting ORACLE instance (normal)
Exception [type: IN_PAGE_ERROR, ] [] [PC:0x1026F5C, _ktfanfy()+0]
Errors in file c:\oracle\product\11g_base\diag\rdbms\hsa11gdb\hsa11gdb\trace\hsa11gdb_ora_3836.trc (incident=2):
ORA-07445: exception encountered: core dump [ktfanfy()+0] [IN_PAGE_ERROR] [] [PC:0x1026F5C] [] []
Incident details in: c:\oracle\product\11g_base\diag\rdbms\hsa11gdb\hsa11gdb\incident\incdir_2\hsa11gdb_ora_3836_i2.trc
Sweep Incident[2]: completed
I am digging deeper in metalink and will keep all posted with findings.
-Anand

Deinstall Failed Oracle 11g 32-bit installation

I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?

user13515882 wrote:
I haven't been able to de-install a failed/incomplete Oracle 11g 32-bit installation from Windows 7. I downloaded the deinstall utility for this configuration, but when I ran the bat file (the only executable file I found), it flashed an error and quit, before I could even read why it failed. What am I missing, please?open Command Window & execute the BAT file from there

Oracle 11g R1 Automatic Installation shell scripts

Hy Guys,
Please can someone help me with: Oracle 11g R1 Automatic Installation shell scripts. A guide, how to or a link will be wellcome
Kind Regards
Easyman
Edited by: Easyman on Feb 2, 2010 3:58 AM

Hi Easyman,
sure, just have a look in $INSTALL_CONF directory. Files starting with swInst* are referencing a response file from $INSTALL_CONF/response directory. Either use a sample configuration file or add your own response file to install Oracle.
Cheers,
David
OCP 9i / 10g / 11g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php
P.S.: If you have more questions about oraToolKit please contact me at: http://www.oratoolkit.ch/faq.php

Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5

Hi all
After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
error 1719 Windows installer issue.
I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
Dave
DJH

Hi Lenora
See below
Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
03-19-2013,17:33:38 : CSetupApp::ScanXML
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
03-19-2013,17:33:38 : MSI Version = 3.1
03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : System Central Processor = 64
03-19-2013,17:33:38 : Product Type = SETUP_BEX64
03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Product Version = 12.5
03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Equal PID
03-19-2013,17:33:38 : Product version: 12.5.2213
03-19-2013,17:33:38 : StartBESequence
03-19-2013,17:33:38 : Executing BE_PreCheckInstall
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing StartBESequence
03-19-2013,17:33:38 : Pulling user data from the MSI
03-19-2013,17:33:38 : Upgrade state set to 0
03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
03-19-2013,17:33:38 : MSI processing complete
03-19-2013,17:33:38 : Pulling user data from the command line
03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
03-19-2013,17:33:38 : After check for parameter file exists.
03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
03-19-2013,17:33:38 : After Check for INSTALL_MODE.
03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
03-19-2013,17:33:38 : Ignoring the TSM switch.
03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
03-19-2013,17:33:38 : Not in Maintenance mode
03-19-2013,17:33:38 : Getting the Silent Params.
03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
03-19-2013,17:33:38 : List of switches set follows:
03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
03-19-2013,17:33:38 : /SNO: = 0930292112010690
03-19-2013,17:33:38 : /USER: = backup
03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
03-19-2013,17:33:38 : /PASS: = ********
03-19-2013,17:33:38 : /TS:
03-19-2013,17:33:38 : /TD: = ALL
03-19-2013,17:33:38 : /DOCS:
03-19-2013,17:33:38 : /LOADER:
03-19-2013,17:33:38 : /AOFO:
03-19-2013,17:33:38 : /EXCH:
03-19-2013,17:33:38 : /SQL:
03-19-2013,17:33:38 : /NTA:
03-19-2013,17:33:38 : /RAULUS:
03-19-2013,17:33:38 : /DBSERVER:
03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
03-19-2013,17:33:38 : /BACKUPDATA: = 0
03-19-2013,17:33:38 : /MAC:
03-19-2013,17:33:38 : Command line processing complete
03-19-2013,17:33:38 : Install set to run in UI mode
03-19-2013,17:33:38 : CDlgPushWelcome::Pass
03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
03-19-2013,17:33:43 : Validating license data
03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:33:44 : Connected to SQL Server.
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:05 : After Check for Remote_Install.
03-19-2013,17:34:05 : After Check for RA_INSTALL.
03-19-2013,17:34:07 : Validating serialization data
03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
03-19-2013,17:34:07 : After Check for INSTALL_MODE.
03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:34:07 : On Init of CDlgChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
03-19-2013,17:34:12 : Validating Local Options Data
03-19-2013,17:34:13 : Validating service account data
03-19-2013,17:34:13 : CDlgSSO Pass Function.
03-19-2013,17:34:13 : After Check for INSTALL_MODE.
03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : Validating DlgChooseDBServer data
03-19-2013,17:34:20 : Drive C: Required: 1102 MB Available: 37138 MB
03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:20 : CDlgCAS Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : CDlgClone Pass Function.
03-19-2013,17:34:20 : CDlgClone not passed.
03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : Install Summary XML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
03-19-2013,17:34:20 : Install Summary XSL File:
03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
03-19-2013,17:34:20 : Install Summary HTML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
03-19-2013,17:34:20 : Not Quickstart Edition
03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
computer. The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:27 : Executing InstallLiveUpdate.
03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Vista or Longhorn server. Not installing .NET Frameworks.
03-19-2013,17:34:40 : .NET Framework was detected. Skipping install.
03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:34:41 : m_bUseNativeClient = 1
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
03-19-2013,17:34:41 : SQL Server version 9
03-19-2013,17:34:41 : SQL version returned: 9
03-19-2013,17:34:41 : Executing SQL_GetServicePack.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
03-19-2013,17:34:45 : V-225-53: ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601. ***To search for information about this error, click
here
03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
03-19-2013,17:34:45 : Failed to install third party products.
03-19-2013,17:37:25 : Validating install complete
03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:37:25 : Removed files:
03-19-2013,17:37:25 : ERROR: Installation failed with error 1603.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:41:16 : Windows Operating System Version: 6.1
03-19-2013,17:41:16 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:41:18 : Executing managed _Setup:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:41:18 : Loading XML from:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:41:19 : Launching UI Install
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:19 : m_bUseNativeClient = 1
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:41:20 : CopySupportFiles
03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:41:28 : Typical install value is set to : True
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:43:04 : Install is not executing as the service account.
03-19-2013,17:43:04 : Successfully Logged on as service account.
03-19-2013,17:43:04 : Successfully impersonated service account.
03-19-2013,17:43:04 : EUserName value successfully written to the registry.
03-19-2013,17:43:04 : EPassword value successfully written to the registry.
03-19-2013,17:43:04 : EDomain value successfully written to the registry.
03-19-2013,17:43:09 : There were no remote computers selected for install
03-19-2013,17:43:09 : m_bUseNativeClient = 1
03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:43:10 : Terminal Services enabled.
03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:43:11 : Executing InstallLiveUpdate.
03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:36 : Starting Install
03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:44:36 : Discovered Total Actions: 115
03-19-2013,17:44:36 : The return code from the MSI is: 1601
03-19-2013,17:44:36 : Cleaning up the symc status key
03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:44:36 : Clean up Symantec installer keys.
03-19-2013,17:44:37 : Terminal Services enabled.
03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:45:28 : Gathering Telemetry items
03-19-2013,17:45:28 : Failed to start the management service
03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,17:45:28 : Sending Telemetry to Symantec
03-19-2013,17:45:28 : Transmit Telemetry initialized.
03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,17:56:31 : Windows Operating System Version: 6.1
03-19-2013,17:56:31 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:56:33 : Executing managed _Setup:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:56:33 : Loading XML from:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:56:34 : Launching UI Install
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : m_bUseNativeClient = 1
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:56:35 : CopySupportFiles
03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:56:49 : Typical install value is set to : True
03-19-2013,17:56:50 : Executing SQL_GetServicePack.
03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : Executing SQL_GetServicePack.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:57:37 : m_bUseNativeClient = 1
03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:58:41 : Install is not executing as the service account.
03-19-2013,17:58:41 : Successfully Logged on as service account.
03-19-2013,17:58:41 : Successfully impersonated service account.
03-19-2013,17:58:41 : EUserName value successfully written to the registry.
03-19-2013,17:58:41 : EPassword value successfully written to the registry.
03-19-2013,17:58:41 : EDomain value successfully written to the registry.
03-19-2013,17:58:51 : There were no remote computers selected for install
03-19-2013,17:58:51 : m_bUseNativeClient = 1
03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:58:52 : Terminal Services enabled.
03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:58:54 : Executing InstallLiveUpdate.
03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Starting Install
03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:59:08 : Discovered Total Actions: 115
03-19-2013,17:59:08 : The return code from the MSI is: 1601
03-19-2013,17:59:08 : Cleaning up the symc status key
03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:59:08 : Clean up Symantec installer keys.
03-19-2013,17:59:10 : Terminal Services enabled.
03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
03-19-2013,18:00:01 : The return code is: 0
03-19-2013,18:00:01 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:02:24 : Windows Operating System Version: 6.1
03-19-2013,18:02:24 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:02:26 : Executing managed _Setup:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:02:26 : Loading XML from:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:02:26 : Launching UI Install
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : m_bUseNativeClient = 1
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:02:26 : CopySupportFiles
03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:11 : The return code is: 0
03-19-2013,18:03:11 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:03:21 : Windows Operating System Version: 6.1
03-19-2013,18:03:21 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:22 : Windows Operating System Version: 6.1
03-19-2013,18:03:22 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:23 : Executing managed _Setup:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:23 : Loading XML from:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Launching UI Install
03-19-2013,18:03:24 : Executing managed _Setup:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : m_bUseNativeClient = 1
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : Loading XML from:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:24 : CopySupportFiles
03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:58 : Typical install value is set to : True
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:05:35 : Install is not executing as the service account.
03-19-2013,18:05:35 : Successfully Logged on as service account.
03-19-2013,18:05:35 : Successfully impersonated service account.
03-19-2013,18:05:35 : EUserName value successfully written to the registry.
03-19-2013,18:05:35 : EPassword value successfully written to the registry.
03-19-2013,18:05:35 : EDomain value successfully written to the registry.
03-19-2013,18:05:36 : There were no remote computers selected for install
03-19-2013,18:05:36 : m_bUseNativeClient = 1
03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:05:37 : Terminal Services enabled.
03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:05:38 : Executing InstallLiveUpdate.
03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Starting Install
03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:05:50 : Discovered Total Actions: 115
03-19-2013,18:05:50 : The return code from the MSI is: 1601
03-19-2013,18:05:51 : Cleaning up the symc status key
03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:05:51 : Clean up Symantec installer keys.
03-19-2013,18:05:51 : Terminal Services enabled.
03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
03-19-2013,18:06:32 : The return code is: 0
03-19-2013,18:06:32 : SUCCESS: Installation has completed successfully.
03-19-2013,18:07:36 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:07:39 : Error initializing shared data
03-19-2013,18:07:39 : ERROR: Installation failed with error 1603. GetLastError = :0
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:47 : Launching UI Install
03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : m_bUseNativeClient = 1
03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:13:48 : CopySupportFiles
03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:13:54 : Typical install value is set to : True
03-19-2013,18:13:55 : m_bUseNativeClient = 1
03-19-2013,18:13:55 : Executing SQL_GetServicePack.
03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : Executing SQL_GetServicePack.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:16:09 : Service account specified is not valid
03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
03-19-2013,18:16:10 : Error validating service account credentials.
03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:16:20 : Install is not executing as the service account.
03-19-2013,18:16:20 : Successfully Logged on as service account.
03-19-2013,18:16:20 : Successfully impersonated service account.
03-19-2013,18:16:20 : EUserName value successfully written to the registry.
03-19-2013,18:16:20 : EPassword value successfully written to the registry.
03-19-2013,18:16:20 : EDomain value successfully written to the registry.
03-19-2013,18:16:22 : There were no remote computers selected for install
03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:16:23 : Terminal Services enabled.
03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:16:25 : Executing InstallLiveUpdate.
03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Starting Install
03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:16:39 : Discovered Total Actions: 115
03-19-2013,18:16:39 : The return code from the MSI is: 1601
03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:16:39 : Clean up Symantec installer keys.
03-19-2013,18:16:39 : Cleaning up the symc status key
03-19-2013,18:16:41 : Terminal Services enabled.
03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:09 : Gathering Telemetry items
03-19-2013,18:17:09 : Failed to start the management service
03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,18:17:09 : Sending Telemetry to Symantec
03-19-2013,18:17:09 : Transmit Telemetry initialized.
03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
03-19-2013,18:17:33 : Telemetry transmission failed. Data was not sent.
03-19-2013,18:17:33 : The return code is: 1601
03-19-2013,18:17:33 : ERROR: Installation failed with error 1601. GetLastError = :0
03-19-2013,18:17:48 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:17:51 : Error initializing shared data
03-19-2013,18:53:53 : m_bUseNativeClient = 1
03-19-2013,18:53:53 : Executing SQL_GetServicePack.
03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : Executing SQL_GetServicePack.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : m_bUseNativeClient = 1
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:58:06 : Windows Operating System Version: 6.1
03-19-2013,18:58:06 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:58:08 : Executing managed _Setup:
03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:58:09 : Loading XML from:
03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:58:09 : Launching UI Install
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : m_bUseNativeClient = 1
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:58:10 : CopySupportFiles
03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:58:15 : Typical install value is set to : True
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:59:43 : Install is not executing as the service account.
03-19-2013,18:59:43 : Successfully Logged on as service account.
03-19-2013,18:59:44 : Successfully impersonated service account.
03-19-2013,18:59:44 : EUserName value successfully written to the registry.
03-19-2013,18:59:44 : EPassword value successfully written to the registry.
03-19-2013,18:59:44 : EDomain value successfully written to the registry.
03-19-2013,18:59:46 : There were no remote computers selected for install
03-19-2013,18:59:46 : m_bUseNativeClient = 1
03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:59:47 : Terminal Services enabled.
03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:59:49 : Executing InstallLiveUpdate.
03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Starting Install
03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,19:00:03 : Discovered Total Actions: 115
03-19-2013,19:00:03 : The return code from the MSI is: 1601
03-19-2013,19:00:03 : Cleaning up the symc status key
03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,19:00:03 : Clean up Symantec installer keys.
03-19-2013,19:00:05 : Terminal Services enabled.
03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:10 : Gathering Telemetry items
03-19-2013,19:00:10 : Failed to start the management service
03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,19:00:10 : Sending Telemetry to Symantec
03-19-2013,19:00:10 : Transmit Telemetry initialized.
03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
03-19-2013,19:00:10 : The return code is: 1601
03-19-2013,19:00:11 : ERROR: Installation failed with error 1601. GetLastError = :0
DJH

ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
While connecting as localhost is pretty well.
but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

user11225434 wrote:
Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                05-AUG-2013 09:31:09
Uptime                    0 days 0 hr. 6 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
ner.ora
Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
ml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orclxe" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
Service "orclxeXDB" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
The command completed successfully
# listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\eee
3. My ip is static 192.168.52.170 and window 7 prof. is there.
4. Sir i have tested the remote connection with firewall configuration is off.
Hopefully this info is useful.
but command: sqlplus username@'192.168.52.178:1521/orcl'
NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

Installation of Oracle 11g on Windows 8

I am trying to install Oracle 11g Database in my windows 8 system.
Whenever i click on the setup.exe the installer window pops up and nothing happens.
I am running it as an administrator.
I need some help on this. I have tried to run in compatibility mode as well but help.

994288 wrote:
I am trying to install Oracle 11g Database in my windows 8 system.Pl identify exact version. Neither 11gR1 not 11gR2 are supported on Win 8 - supported OS versions are documented - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
Certification of Win 8 is expected with a future release - see http://www.oracle.com/technetwork/database/windows/tech-info/sod-oracle-db-win8-win2012-1853201.pdf
You have three options
1. Wait for this future Oracle release
2. Downgrade your OS to a supported version.
3. Install VM software (like Virtualbox), create a VM, install a supported OS in the VM, then install 11gR2 in the VM - see my blog (linked in my profile) for a detailed example
Whenever i click on the setup.exe the installer window pops up and nothing happens.
I am running it as an administrator.
I need some help on this. I have tried to run in compatibility mode as well but help.HTH
Srini

Oracle 11g R2 Windows Installation issue

Similar Messages

Maybe you are looking for