Oracle 11gR2 RAC : How to resume runInstaller to continue to install Grid ?

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
After finish running the script root.sh in VM rac1 and rac2, the Computer is shut down automaticall because I don't touch the keyboad for a long time. When I resume the Computer, runInstaller Wizard is gone. My question is:
How to resume runInstaller to continue to install Grid ?
Thanks.

Hi!
You can't resume runInstaller.
You must Clear you envinronment, and try again.

Similar Messages

  • Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?

    Folks,
    Hello.
    I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
    I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
    [ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
    All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
    Check default user profile creation mask:
    Node Name: rac1
    Available: 0002
    Required: 0022
    Comment: failed
    There are 3 ways to solve this issue:
    1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
    2) In the file /etc/profile, add line "umask 0022" at the end of the file.
    3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
    In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
    But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
    The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
    Do any folk understand how to solve VM rac1 user profile creation mask problem ?
    Thanks.

    Folks,
    Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
    [root@rac1 /]#echo $SHELL
    Output: /bin/bash
    This means we need to edit Bash shell file .bash_profile.
    [ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
    Add this line: umask 022
    Then I save the file .bash_profile and reboot OS.
    Then I run the following command:
    [ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
    But the reusult is the same. The issue is not solved as follows:
    Check default user profile creation mask:
    Node Name: rac1
    Available: 0002
    Required: 0022
    Comment: failed
    Do any folk understand how to solve VM rac1 user profile creation mask problem ?
    Thanks.

  • Oracle 11gR2 RAC: Running the script root.sh problem

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
    Now, I am running the script root.sh in VM rac1 and rac2 as below:
    [root@rac1 /]# /u01/app/grid/root.sh
    Output:
    CRS-4123: ohasd is starting
    FATAL: Module oracleoks not found
    FATAL: Module oracleadvm not found
    FATAL: Module oracleacfs not found
    ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
    ACFS-9310: ADVM/ACFS installation failed.
    ACFS-9311: not all components were detected after installation
    'UpdateNodeList' was successful.
    [root@rac1 /]#
    [root@rac2 /]# /u01/app/grid/root.sh
    Output:
    CRS-4123: ohasd is starting
    FATAL: Module oracleoks not found
    FATAL: Module oracleadvm not found
    FATAL: Module oracleacfs not found
    ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
    ACFS-9310: ADVM/ACFS installation failed.
    ACFS-9311: not all components were detected after installation
    Start of resource "ora.asm_init" failed.
    Failed to start ASM.
    Failed to start Oracle Clusterware Stack.
    [root@rac2 /]#
    As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
    First, the common problem for rac1 and rac2 :
    1)Module "oracleoks, oracleadvm, oracleacfs" not found
    2)/dev/asm/.asm_ctl_spec not detected
    3)ADVM/ACFS installation failed
    Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
    Second, how to start ASM and Clusterware stack in rac2 ?
    Thanks.

    you have 2 options:
    1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
    or the one i would recommend:
    2. Upgrade Grid Infrastructure,
    *11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC)

  • Reinstalling Oracle 11gR2 RAC Grid Problem - ASM Disks Group

    Folks,
    Hello.
    I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
    I have been installing Grid Infrastructure using runInstaller in the first VM rac1 from step 1 to step 9 of 10.
    On the step 9 of 10 in the Wizard, accidentally, I touch the Mouse, and the Wizard is gone.
    The directory for installing Grid in the 2 VMs is the same: /u01
    In order to make sure everything is correct, I delete entire directory /u01 in the 2 VMs and install Grid in rac1 again.
    I have understood it's not the right way to delete /u01. The right way is to follow the tutorial
    http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEFHAC
    But I have deleted /u01 and need to fix one by one. I install Grid again and get the error message on step 5 of 9 as follows:
    [INS - 30516] Please specify unique disk groups.
    [INS-3050] Empty ASM disk group.
    Cause - Installer has detected the disk group name provided already exists on the system.
    Action - Specify different disk group.
    In Wizard, the previous Disk Group name is "DATA" and its Candidate disks (5 ASMDISKs) are gone. I try to use a different name "DATA2", but no ASMDISKs come up under "Candidate disks". For "ALL Disks", all ASMDISKs cannot be selected.
    I want to use the same ASM disk group "DATA" and don't want to create a new disk group.
    My question is:
    How to have the previous ASM disks and its group "DATA" come up under "Candidate Disks" so that can use it again ?
    Thanks.

    Hi, in case this helps anyone else. I got this INS-30516 error too was stumped for little while. I have 2 x 2-node RAC which are hitting same SAN. The first-built RAC has a DATA diskgroup. When went to build second RAC on new ASM disk new DIskgroup (but same diskgroup name DATA) got INS-30516 about diskgroup name already in use etc. Finally figured out all that was required was to restrict diskstring using button in installer to only retrieve the LUNS for this RAC (this was quick and dirty - all LUNS for both RAC being presented to both RAC). Once diskstring only searched for the LUNS required for this RAC only, e.g.
    ORCL:DATA_P* (for DATA_PD and FRA_PD)
    the error went away.
    I also have DATA_DR and FRA_DR presenting to both RAC. Apparently it scans the header and if it finds a diskgroup name that is already in use based on the diskstring scan it will not allow reuse of the diskgroup name since it has no way of knowing that the other ASM disks are for a different RAC.
    HTH

  • SCAN Name issue in Oracle 11gR2 RAC Installation

    Hi,
    I am trying to install Oracle 11gR2 RAC on VM ware and I got the INS-40922 (Invalid SCAN name). Do I need to create the SCAN name prior to the installation?
    I have public,private, and VIP's. I am not sure how I create this SCAN Name. Please share your thoughts
    Thanks

    During installation of grid infrastructure SCAN will be automatically created. If you are using DNS then put the scan name and scan ip addresses entries in DNS . If you are not using dns/gns then put scanname and scan ipadress hosts file on each node in the cluster. Before installation, you should not be able to ping scan ipadresses.

  • Oracle 11gr2 RAC hardware

    Hello experts,
    how to install oracle 11gR2 RAC on Laptop.what are the basic requirements.
    RAM 6GB
    i7 processer, 500GB Hard Disk
    Thanks in Advance.

    Hi,
    Also two more articles on the same portal with regards to 11gR2 RAC installations
    []http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-linux-using-nfs.php[]
    []http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-windows-2008-using-virtualbox.php[]
    Regards,

  • Oracle 11gR2 RAC clusterware not picking up ASM diskgroups

    Hello: I had to deinstall a failed oracle 11gR2 rac cuslterware. But, not the asm disks are not in the OUI pick list. How can I resolve that?
    The storage is on SAN partitions.

    Probably the install already put something on the disks.
    Clean them with dd if=/dev/zero of=<your asm disks> bs=1M count=10
    Regards
    Sebastian

  • Installing Oracle 11gR2 RAC Problem: ASM disks

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    At the first time, I create VM rac1. While its OS Oracle Linux 5.6 is booting, initializing ASMLib Driver OK. I create 5 ASM disks successfully using the command:
    [root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
    Output: Marking disk "ASMDISK1" as an ASM disk: OK
    Because the hard disk space of rac1 is not enough to install Database, I create VM rac1 again with bigger hard disk space (30GB). I do everything the same with that at the first time. But this time, While OS Oracle Linux 5.6 is booting, initializing ASMLib Driver failed. I create 5 ASM disks using the same command:
    [root@rac1 /]# /etc/init.d/oracleasm createdisk ASMDISK1 /dev/sdb1
    Output: Marking disk "ASMDISK1" as an ASM disk: failed
    But when I use the command:
    [root@rac1 /]# /etc/init.d/oracleasm listdisks
    Output: ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5
    My questions are:
    First, can the 5 disks "ASMDISK1 ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5" be used correctly in spite of Marking disk "ASMDISK1(2 3 4 5)" as an ASM disk failed ?
    Second, how to fix OS Oracle Linux 5.6 so that initializing ASMLib Driver OK while booting ?
    Thanks.

    Folks,
    Hello. The issue is solved by myself. Thanks.

  • Uninstall of oracle 11gR2 RAC on linux

    Hi all,
    i am in learning stage, can anybody help me how to uninstall the Oracle 11gR2 RAC on linux.
    thank you.

    http://gruffdba.wordpress.com/2012/10/29/oracle-11gr2-rac-install-cleaning-up-a-failed-install-on-linux/
    you can go through this link you will get an idea

  • Oracle 11gR2 RAC Backup & Recovery

    I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
    Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC.
    - Mano

    ManoRangasamy wrote:
    I am new to Oracle RAC, I have installed Oracle 11gR2 RAC (2 node) on HP-UX with ASM, configured FRA location on ASM.
    Now I would like to configure RMAN backup, Can someone give some idea or document to setup RMAN backup for Oracle 11gR2 RAC. There won't be any different settings for RMAN for RAC except for where and how you would be configuring the Archive logs and place your backups. Both, ideally speaking, should be on the shared storage like ASM but there are other combinations also possible. Review the above given links for the same. That should provide a good starting point.
    Aman....

  • ORACLE 11gR2 RAC on Fedora 14 unsing qemu

    Is it possible to install ORACLE 11gR2 RAC on FEDORA 14 using Virtual machine based on qemu which is by default available with FEDORA 14.
    Can someone have any hint. I know this is not supported by ORACLE Corporation, But for learning purpose this would be great help.

    Hi,
    Not sure about gemu but you can easily setup a system using virtualbox since this is for learning shouldn't make much difference how you set it up.
    http://www.asanga-pradeep.blogspot.com/2010/10/10gr2-rac-on-rhel-4-using-virtualbox.html
    http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
    http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVMwareServer2.php

  • Install Oracle 11gR2 RAC : Cannot remove directory bootstrap under /tmp

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
    http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
    "Free Space: Rac2: /tmp
    Cause: Could not determine mount point for location specified.
    Action: Ensure location specified is available.
    Expected value: n/a
    Actual value: n/a "
    In order to fix the above error, I run "cluster verification utility" according to
    http://docs.oracle.com/cd/E14072_01/rac.112/e10717/cvu.htm I run the following command:
    [ora11g@rac1 \]$ /home_grid/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
    Output:
    /bin/rm: cannot remove directory '/tmp/bootstrap': Operation not permitted
    ./runcluvfy.sh:line 99:/tmp/bootstrap/ouibootstrap.log: permission denied
    From the above output, we can see the directory bootstrap under /tmp causes the problem. The solution is to remove the directory bootstrap. I run the 2 commands:
    [ora11g@rac1 tmp]$ rmdir bootstrap
    Output: Operation not permitted
    [ora11g@rac1 tmp]$ rm -rf bootstrap
    Output: cannot remove bootstrap: Operation not permitted.
    [ora11g@rac2 tmp]$ ls
    Output: there is no 'bootstrap' directory.
    My questions are:
    First, does "cannot remove boostrap in rac1" cause that /tmp in rac2 could not be determine mount point ?
    Second, can any folk help to remove the directory bootstrap under /tmp ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying. I have just run the 2 commands:
    [root@rac2 \]# chown -R ora11g:dba /u01
    [root@rac2 \]# chmod -R 775 /u01
    ora11g is the user who installs the Grid and /u01 is the directory where Grid is installed and dba is the group.
    I go back to Grid Installer Step 7 of 10 in rac1 and check again and see as below:
    Free Space: Rac2 : /tmp
    Cause: Could not determine mount point for location specified.
    Action: Ensure location specified is available
    Expected Value: n/a
    Actual Value: n/a
    The problem is not solved after run the above 2 commands in rac2.
    In addition, I have run Cluster Verification Utility using the command:
    [ora11g@rac1 grid]./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -r 11gR2 -orainv ora11g -verbose
    Output: All of items for rac2 are passed. There is only one item for rac1 is failed as below:
    Check default user file creation mask:
    NodeName: rac1
    Available: 0002
    Required: 0022
    Comment: failed
    As we see above, the result of CVU command is not the same with Grid Installer step 7 of 10 (Installation Environment Verification):
    CVU command doesn't find /tmp mount point problem for rac2 that Grid Installer does.
    Grid Installer step 7 of 10 doesn't find user file creation mask problem for rac1 that CVU command does.
    I have tried to find out whether creation mask failed for rac1 causes /tmp problem for rac2. I have changed the line "umask 002" to "umask 0022" for rac1 in each of the 3 files below and run CVU command each time for each file:
    rac1:
    /etc/bashrc
    /etc/profile
    /etc/csh.cshrc
    But chang the line "umask 002" to "umask 0022" for rac1 in each of the above 3 files does not solve the problem.
    My questions are:
    First, why is the result of CVU command not the same with that of Grid Installer step 7 of 10 ?
    Second, why change the line "umask 002" to "umask 0022" in 3 files can't solve creation mask problem for rac1 ?
    Third, how to solve /tmp problem for rac2 and creation mask problem for rac1 ?
    Thanks.

  • Oracle 11gR2 RAC in LDOM Network issue

    Hi, Requesting your expert advise regarding this configuration.
    We are implementing LDOM 2.2 on two SPARC T4-4 for Oracle 11gR2 RAC; Solaris 10 U10 on both control and guest domain. The setup for each primary/control domain is: Two 10g links aggregated and have four VLAN trunked on the aggregate. vSwitch created using the aggr as the device as following per T4-4:
    NOTE: VLAN 1501 is for data connection and VLAN 10 is for heartbeat for one RAC cluster and VL 1601 and 11 is for another RAC. all together four LDOMS.
    ldm add-vswitch vid=1501,1601,10,11 net-dev=aggr1 primary-vsw0 primary
    ldm add-vnet pvid=1501 vnetprod primary-vsw0 guest1
    ldm add-vnet pvid=10 vnethb primary-vsw0 guest1
    ldm add-vnet pvid=1601 vnetprod primary-vsw0 guest2
    ldm add-vnet pvid=11 vnethb primary-vsw0 guest2
    vnet inside the LDOM are not tagged:
    vnet1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
    inet 10.220.128.20 netmask ffffff80 broadcast 10.220.128.127
    ether 0:14:4f:f9:ec:7f
    vnet2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
    inet 192.168.2.11 netmask ffffff80 broadcast 192.168.2.127
    ether 0:14:4f:fb:2b:8f
    Here is the whole configuration:
    root@gp-cpu-suh004 # ldm -V
    Logical Domains Manager (v 2.2.0.0)
    Hypervisor control protocol v 1.9
    Using Hypervisor MD v 1.4
    System PROM:
    Hostconfig v. 1.2.0. @(#)Hostconfig 1.2.0.a 2012/05/11 07:34
    Hypervisor v. 1.11.0. @(#)Hypervisor 1.11.0.a 2012/05/11 05:28
    OpenBoot v. 4.34.0 @(#)OpenBoot 4.34.0 2012/04/30 14:26
    root@gp-cpu-suh004 # ldm ls
    NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
    primary active -n-cv- UART 32 16G 2.5% 48m
    oidrac1 active -n---- 5000 32 16G 0.0% 27m
    root@gp-cpu-suh004 # ldm ls -l
    NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
    primary active -n-cv- UART 32 16G 3.1% 48m
    SOFTSTATE
    Solaris running
    UUID
    e73421fe-7003-e748-be7e-801fee5bfcc7
    MAC
    00:21:28:f1:95:26
    HOSTID
    0x85f19526
    CONTROL
    failure-policy=ignore
    extended-mapin-space=off
    cpu-arch=native
    DEPENDENCY
    master=
    CORE
    VCPU
    MEMORY
    RA PA SIZE
    0x20000000 0x20000000 16G
    CONSTRAINT
    threading=max-throughput
    VARIABLES
    auto-boot-on-error?=true
    auto-boot?=true
    boot-device=/pci@400/pci@1/pci@0/pci@0/LSI,sas@0/disk@w5000cca0251e7a29,0:a
    keyboard-layout=US-English
    nvramrc=." ChassisSerialNumber 1207BDYFFE " cr
    use-nvramrc?=true
    IO
    DEVICE PSEUDONYM OPTIONS
    VCC
    NAME PORT-RANGE
    primary-vcc0 5000-5100
    VSW
    NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
    primary-vsw-mgmt 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
    primary-vsw0 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
    VDS
    NAME VOLUME OPTIONS MPGROUP DEVICE
    primary-vds0 rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
    data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
    ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
    VCONS
    NAME SERVICE PORT
    UART
    NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
    oidrac1 active -n---- 5000 32 16G 0.0% 27m
    SOFTSTATE
    Solaris running
    UUID
    0fcbbf21-14a2-eb21-f544-d4424212f3ef
    MAC
    00:14:4f:f9:1b:d4
    HOSTID
    0x84f91bd4
    CONTROL
    failure-policy=ignore
    extended-mapin-space=off
    cpu-arch=native
    DEPENDENCY
    master=
    CORE
    CID CPUSET
    VCPU
    VID PID CID UTIL STRAND
    MEMORY
    RA PA SIZE
    0x20000000 0x420000000 16G
    CONSTRAINT
    threading=max-throughput
    VARIABLES
    auto-boot?=true
    boot-device=disk:a
    keyboard-layout=US-English
    NETWORK
    NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
    vnet1 primary-vsw-mgmt@primary 0 network@0 00:14:4f:fa:61:77 1 1500
    vnetprod primary-vsw0@primary 1 network@1 00:14:4f:f9:ec:7f 1501 1500
    vnethb primary-vsw0@primary 2 network@2 00:14:4f:fb:2b:8f 10 1500
    DISK
    NAME VOLUME TOUT ID DEVICE SERVER MPGROUP
    oneidrootdisk rootoid@primary-vds0 0 disk@0 primary
    oid_data data_oid@primary-vds0 1 disk@1 primary
    oid_ocr ocr_oid@primary-vds0 2 disk@2 primary
    VCONS
    NAME SERVICE PORT
    oidrac1 primary-vcc0@primary 5000
    root@gp-cpu-suh004 # ldm ls-services
    VCC
    NAME LDOM PORT-RANGE
    primary-vcc0 primary 5000-5100
    VSW
    NAME LDOM MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
    primary-vsw-mgmt primary 00:14:4f:fb:75:c0 igb1 0 switch@0 1 1 1500 on
    primary-vsw0 primary 00:14:4f:fa:33:8b aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
    VDS
    NAME LDOM VOLUME OPTIONS MPGROUP DEVICE
    primary-vds0 primary rootoid /dev/dsk/c14t50060E8005BFAA04d1s2
    data_oid /dev/dsk/c14t50060E8005BFAA04d2s2
    ocr_oid /dev/dsk/c14t50060E8005BFAA04d3s2
    root@gp-cpu-suh004 # dladm show-link
    vsw0 type: non-vlan mtu: 1500 device: vsw0
    vsw1 type: non-vlan mtu: 1500 device: vsw1
    vsw1501001 type: vlan 1501 mtu: 1500 device: vsw1
    igb0 type: non-vlan mtu: 1500 device: igb0
    igb1 type: non-vlan mtu: 1500 device: igb1
    qlge0 type: non-vlan mtu: 1500 device: qlge0
    qlge1 type: non-vlan mtu: 1500 device: qlge1
    qlge2 type: non-vlan mtu: 1500 device: qlge2
    qlge3 type: non-vlan mtu: 1500 device: qlge3
    aggr1 type: non-vlan mtu: 1500 aggregation: key 1
    root@gp-cpu-suh004 # ifconfig -a
    lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
    inet 127.0.0.1 netmask ff000000
    igb0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
    inet 10.223.12.14 netmask ffffff00 broadcast 10.223.12.255
    ether 0:21:28:f1:95:26
    vsw1501001: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
    inet 10.220.128.9 netmask ffffff80 broadcast 10.220.128.127
    ether 0:14:4f:fa:33:8b
    root@gp-cpu-suh004 # netstat -nr
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    default 10.220.128.1 UG 1 7
    10.220.128.0 10.220.128.9 U 1 5 vsw1501001
    10.223.0.0 10.223.12.1 UG 1 2
    10.223.12.0 10.223.12.14 U 1 1 igb0
    224.0.0.0 10.220.128.9 U 1 0 vsw1501001
    127.0.0.1 127.0.0.1 UH 8 261 lo0

    Yes, I can connect to the vswitch interface on the control domain. I didn't specify any PVID because my understanding is that PVID will tag any frame with the PVID VLAN by default. basically the PVID for this interface is 1.
    Here's the VNET config for the other LDOM in the RAC cluster:
    VSW
    NAME MAC NET-DEV ID DEVICE LINKPROP DEFAULT-VLAN-ID PVID VID MTU MODE INTER-VNET-LINK
    primary-vsw-mgmt 00:14:4f:f9:91:fa igb1 0 switch@0 1 1 1500 on
    primary-vsw0 00:14:4f:fa:8e:cf aggr1 1 switch@1 1 1 1501,1601,10,11 1500 on
    NETWORK
    NAME SERVICE ID DEVICE MAC MODE PVID VID MTU LINKPROP
    vnet1 primary-vsw-mgmt 0 00:14:4f:fb:65:6d 1
    vnetprod primary-vsw0 1 00:14:4f:fa:2b:02 1501
    vnethb primary-vsw0 2 00:14:4f:f8:12:c1 10
    Thanks for reviewing my configuration.

  • Oracle 11gR2 RAC - R language integration

    Hello,
    We want statistical language R integration with oracle database. Does this come with default installation of oracle database Oracle 11gR2 RAC ?
    OR it requires EXADATA - BIGDATA (oracle appliance)?
    Kindly let us know steps for installation /enabling R language ? Basically we are looking for 3 options (transparency, In-database, embedded). Optimal option choice is done automatically depending on R language script (I think R script needs to have different calls?)
    Thanks

    Please do NOT duplicate your questions here.
    R is a language. Oracle is a database. You store data in a database. You write programs [using a language such as R] to extract and manipulate data from the database.

  • Oracle 11gR2 RAC VM and SCAN and DNS and /etc/hosts (two) setup questions

    Hi,
    I am looking forward to setting up two Oracle 11gR2 RAC instances
    on my Oracle VM test machine.
    I plan on using the Oracle 11gR2 RAC VM template.
    I want the final Oracle 11gR2 RAC instances to have SCAN that uses DNS.
    The DNS will be pre-installed in the JeOS.
    My first simple question about the setup is the following.
    In my DNS name file, for example,
    /var/named/chroot/var/named/milkyway.univ.db
    do I need to provide the racnode1 and racnode2 information,
    for example,
    # DNS name file (snippet)
    myjeos IN A 192.168.1.150
    racnode1 IN A 192.168.1.161
    racnode1-vip IN A 192.168.1.163
    racnode2 IN A 192.168.1.162
    racnode2-vip IN A 192.168.1.164
    rac-scan IN A 192.168.1.131
    rac-scan IN A 192.168.1.132
    rac-scan IN A 192.168.1.133
    Or, can I just provide only the rac-scan information
    # DNS name file alternate (snippet)
    myjeos IN A 192.168.1.150
    rac-scan IN A 192.168.1.131
    rac-scan IN A 192.168.1.132
    rac-scan IN A 192.168.1.133
    What I am getting at is the following.
    Within the install process, will racnode1, racnode1-vip, racnode2,
    and racnode2-vip host names and their IP address be written
    to the RAC instances /etc/hosts files? (So I should not bother
    to put them in the DNS name file like '# DNS name file alternate (snippet)'?)
    Or, should I put the racnode and racnode-vip host names and IP addresses
    in the DNS name file like '# DNS name file (snippet)'?
    The second question is the following.
    Are the cluster name and the scan name allowed to be different?
    Currently, I would plan them to be different,
    for example, rac-cluster and rac-scan.
    Or, are they required to be the same,
    for example, rac-cluster and rac-cluster.
    Thank you.
    AIM

    AIM wrote:
    do I need to provide the racnode1 and racnode2 information,
    Or, can I just provide only the rac-scan information You need to provide all of it in DNS, because other hosts in your network will need to be able to resolve all of the normal, VIP and SCAN addresses for your RAC nodes. We write this data out to /etc/hosts just to reduce the amount of round-trip DNS requests the cluster nodes make for themselves.
    Are the cluster name and the scan name allowed to be different?They can be different.

Maybe you are looking for

  • HT201272 apps wont update

    I cant get my apps to update...any advice...Nothing wrong with password..

  • How to highlight or make a Smart Playlist of missing music files?

    I recently converted my library from Mac to PC and out of the 45000 songs there are around 1500 missing. It'll take forever to search my library for the ! next to each missing sing. Anyway to simply get all the missing songs in one list?

  • Another question...this time about Styles in PSE 10...help?

    I've had Photoshop Elements 7.0 for quite some time, and use styles pretty often.   When I bought Photoshop Elements 10 a while ago,  I transferred all of the styles I've accumulated over the years into the PSE 10 - and then discovered that most of t

  • Quicktime trouble

    Quicktime is fubar. I have re-installed and re-installed Quicktime, but it is having some serious issues. I posted a few days ago, but no one has responded. Since then I have looked for answers and help on the internet with no success. I cannot watch

  • Authorization creation by ODS((0TCA_DS01) not possible on PRD system

    Hi friends, I am setting the authorization values by using ODS(0TCA_DS01)(uploading file data to the ODS and then creating it via RSSM). But it is not possible on PRD system on which system is set as "No change to repository cross-client customizing