Oracle 8.1.5 Client/WLS/Solaris x86

has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

This will not work. We have not built the native libraries to work with
Solaris on Intel..
I suggest trying the platform independent type 4 JDBC driver available for
free from Oracle. It is supported (as is any JDBC driver) with WebLogic
Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Dean Davis" <[email protected]> wrote in message
news:3a267487$[email protected]..
has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
greatly appreciated.thanks.

Similar Messages

Searching Oracle 8.1.7 Client for Solaris on x86/Intel

Hi all,
I need an Oracle client 8.1.7 running on a Sun Solaris on a Intel/x86 chipset (in VMware)
Exists there any location to download this client?
thanx for help!
Andreas
Salzburg, Austria

Are there plans to have a Solaris x86 version downloadable on OTN? I am making the OS decision for a new development server. I would like it to be Solaris x86 but if Oracle is a no-go on Solaris x86, I will have to use Linux or... hate to say it... M$

Reg: Oracle 9i Enterprise Edition software for solaris x86 (32-bit)

Hi,
Where can i download the Oracle 9i Enterprise Edition software for solaris x86 (32-bit).
Thanks in advance.
Edited by: ora_man_8873786 on May 14, 2011 12:50 AM

If you have a CSI you can always order the CD at My Oracle Support by submitting a SR.
Sybrand Bakker
Senior Oracle DBA

Installing Oracle Virtual Directory Manager client on Solaris 10

Hi,
While installing Oracle Virtual Directory Client on solaris 10, I am getting
"ovidm1014.bin : /tmp/install.dir.<number>/linux/resource/jre/bin/java: cannot execute" error while initiating the installer.
Can someone look into the message and advice me in overcoming the issue as we are held up on this for three days?
Earliest reply is favoured
Thanks

Hi,
Thanks once again for reply!!
If you already installed Oracle Virtual Directory Manager on Sun SPARC, can you brief us pre-requisite setting and installation steps, so that we can follow the same.
Because, we are getting error in the initialization of installation process itself. So, I think there must be some configuration settings to be made.
We already raised SR (Service Request) with Oracle, bu there is no reply from their side till now.
I am waiting for your reply ASAP
Regards

Does Oracle 8i or 9i server support solaris X86 platform ?

Can i install the Oracle 8i or 9i server on a intel PIII machine ?
thanks for answer !

I'm sure that Oracle8i server supports Solaris Intel Platform and Oracle9i doesn't support Solaris Intel Platform at this moment as I know.

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
     at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
     at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
     at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
     at oracle.net.ca.InitialSetup.<init>(Unknown Source)
     at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000      /lib/libthread.so.1
0xfefd0000      /lib/libdl.so.1
0xfeed0000      /lib/libc.so.1
0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000      /usr/lib/libCrun.so.1
0xfee50000      /lib/libsocket.so.1
0xfedc0000      /lib/libnsl.so.1
0xfeda0000      /lib/libm.so.1
0xfeeb0000      /usr/lib/libsched.so.1
0xfe9a0000      /lib/libm.so.2
0xfed50000      /lib/libscf.so.1
0xfe980000      /lib/libdoor.so.1
0xfe960000      /lib/libuutil.so.1
0xfe940000      /lib/libmd5.so.1
0xfe920000      /lib/libmp.so.2
0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000      /usr/dt/lib/libXm.so.4
0xf0cf0000      /usr/openwin/lib/libXt.so.4
0xf0cc0000      /usr/openwin/lib/libXext.so.0
0xf1890000      /usr/openwin/lib/libXtst.so.1
0xf0c30000      /usr/openwin/lib/libX11.so.4
0xf0be0000      /usr/openwin/lib/libdps.so.5
0xf0a90000      /usr/openwin/lib/libSM.so.6
0xf0a70000      /usr/openwin/lib/libICE.so.6
0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000      /lib/libkstat.so.1
0xefc40000      /lib/libgen.so.1
0xefc20000      /lib/librt.so.1
0xefbf0000      /lib/libaio.so.1
0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1     localhost.localdomain     localhost
#192.168.100.1     bt.lan.home     bt
#192.168.100.5     jacek.lan.home     jacek
# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

Connect to Oracle database from Perl on Solaris x86

Hi,
How can I connect to Oracle database using Perl scripts on Solaris x86. It seems that DBD-Oracle Perl module requires Oracle client installed to work. Is there any Oracle client available for Solaris x86? Any one got a workaround? Thanks.
Angus Lee

Yes, you absolutely must have some portions of the rdbms installed before you can proceed. If your Solaris x86 machine is only a client, then you can get away with installing just ?/rdbms/mesg and ?/rdbms/lib.
I have Oracle 7.3.4, 8.0.5, 8.0.6, and 8.1.6 for Intel Solaris 2.6. I don't know if they'll run on Solaris 8 or 9 but I'm trying to upgrade at this very moment. As long as you conform to Oracle developer license, then you may download them from my machine.
I believe the reason Oracle dropped their Intel Solaris port is probably because Sun went through a period where they themselves dropped their Intel port. They've picked back up and if enough Oracle on Intel Solaris customers scream, then Oracle might pick it back up again too.
Send me an email if you're interested in the downloads.

Which 10g release supports Solaris x86 version 10?

Hi,
I downloaded Oracle 10.1.0.3 for Solaris x86. When I installed it, I got error, saying I can only install this version on Solaris 9 x86. Do you have any idea which Oracle 10g version supports Solaris x86 version 10?
Thanks
L

Hi,
If we believe metalink, Oracle 10gR1 is already certified for Solaris x86
Solaris Operating System x86 Version 10
Oracle Database - Enterprise Edition Version 10g
Status: Certified
Certification Note:
Install Information:
o 1. Execute runInstaller with the -ignoreSysPrereqs option.
o 2. Select 'Do not create a starter database' when installing Oracle 10g.
o 3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
o 4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
o 5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.
Have you run installer like recommended in point 1 ?
For 10gR2, you need to wait december for certification.
Nicolas.

Configuration assistant error with Oracle 10g 10.2.02 with Solaris 10 6/06

Hi all,
As anyone seen this a fix for this error?
I have installed Solaris 10 6/06 x86 on VMWare 5.2 which works fine.
When I attempt to install Oracle 10g 10.2.02 for Solaris x86 (released in Sept 06), the install goes fine until I get to the configuration assistant stage.
The first Net based configuration assistant fails with a Java exception which seems to be related to a Sig 11 in the libc library.
This looks like an error fixed by a patch mentioned in the release notes but the patch does not seem to be available for this version of Solaris.
Any comments would be greatly appreciated...
Regards
Anthony

Hi all,
Just to update this.
I have deselected the create database option part of the install and Oracle installs OK!
The problem is in the create database phase which I have manually done when I use the dbca program.
When I get to the create database operation of the the dbca wizard, I get a the following error "ORA-00600, internal error code, arguments [kelntf-ldminit, [146],[1],[],[],[],[],[]"
Any offers?

Oracle InstantClient for Solaris x86

Hi,
Do you Oracle oracles foresee Instant Client upgrades for the Solaris x86 platform? It seems to be stuck at 10.1.0.3.
I ask because we just picked up four Oracle CPU licenses, installed RAC, and hoped to put all of our apps on those nifty AMD Opteron-based boxes that Sun is manufacturing these days.
Thanks!

Oracle never released a 9i port for Solaris on x86; There is however full
support (including a 64 bit version) of 10G

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

How to upgrade oracle 32 to 64 bit on sun solaris x86 64 bit OS?

Hi,
I want to upgrade/convert 32 bit Oracle Database 10.2.0.2 to 64 bit database. Existing 32 bit database is RAC and it is running on Sun Solaris X86 64 bit OS.
First, I want to know is it possible?
If yes, then what are the exact steps?

Hi,
Such a migration can be done, just follow the steps in Metalink note 62290.1
It is important to remember that 64-bit database requires more shared pool memory so you should increase your shared pool size.
Liron Amitzi
Senior DBA consultant
[www.dbsnaps.com]
[www.orbiumsoftware.com]
Edited by: Liron Amitzi on Jul 1, 2009 3:08 PM

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Oracle Database 10g Release 1(10.1.0.3) for Solaris x86

I've downloaded this version of oracle to be installed on solaris x86 for version 5.10 but unfortunatly the following error has occurred:
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2006-02-15_11-16-32AM/installActions2006-02-15_11-16-32AM.log
so it is failed to install ...
please advise,,
thx alot...

from metalink:
General Notes For Oracle Database - Enterprise Edition On
Solaris Operating System x86:
Sun Solaris OS 10 Information:
o Oracle will announce certification of the following database products on the Sun Solaris 10 operating system shortly after it is announced as being generally available by Sun. This is planned for March 2005.
+ Oracle Database 9iR2 (with 9.2.0.4 Patchset) for Sun Solaris SPARC32
+ Oracle Database 9iR2 (with 9.2.0.5 Patchset) for Sun Solaris SPARC64
+ Oracle Database 10gR1 (with 10.1.0.3 Patchset) for Sun Solaris SPARC64
+ Oracle Database 10gR1 (includes 10.1.0.3 Patchset) for Sun Solaris x86
o When Oracle Database 10gR2 releases on Sun platforms later in 2005, the following releases will be certified on the Sun Solaris 10 operating system:
+ 10gR2 Database for Sun Solaris SPARC64
+ 10gR2 Database for Sun Solaris AMD64
+ 10gR2 Database for Sun Solaris x86
pasquale rago

Oracle 8.1.5 Client/WLS/Solaris x86

Similar Messages

Maybe you are looking for