Oracle 8.1.6 on Sun Sparc Solaris 8

Any successful story of Oracle 8.1.6 runs on Sun Sparc Solaris 8?
The documentation of Oracle 8.1.6 mentions that it can run on Solaris 2.6 and 7. But how about Solaris 8?
Thanks.

Could you tell us how to do that????
We all met the ORA-01034 problem!
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Wile E. Coyote:
Yes, that's no problem
I've installed 8.1.6 on several machines running Solaris 8 without any problem<HR></BLOCKQUOTE>
null

Similar Messages

  • Need Oracle 8.1.5 for Sun SPARC Solaris

    I need this version of Oracle to use a vendor package that was developed and certified on this platform. Does anyone know where I can download this from? I cannot find it anywhere in the Oracle site.

    Oracle 8i Enterprise Edition Release 8.1.5.0.0 was in the sun solaris 8 distribution.

  • Oracle Forms Developer/Services 6i Release 2 for Sun SPARC Solaris

    Exist? :
    Oracle Forms Developer/Services 6i Release 2 for Sun SPARC Solaris
    6i Release 2 ,it's product or patch ?
    I want to know then Software Product CD Part number, Part # ????? Release 2 , not Release 1!!

    I'm getting the page not found error on trying to download the setup Oracle Forms Developer 6i Release 2 for 95/98/NT/2000/XP from:
    http://www.oracle.com/technology/software/products/forms/htdocs/winsoft.html

  • Management Agent 10.2.0.3 on Sun SPARC Solaris

    Hi all,
    can anyone tell me what are the requirements (software,hardware) for installing the management agent 10.2.0.3 on Sun SPARC Solaris??
    Thanks,
    in advance

    http://download-west.oracle.com/docs/cd/B16240_01/doc/install.102/b25949/toc.htm

  • How to install oracle 9i report server on sun sparc 280 system

    hello to all
    may i get any help to install report server on the sun sparc 280 R system which is running oracle 9i database,forms and reports
    thanks in adv.
    Mohan

    hello,
    what kind of information are you looing for abve and beyond whats documented in the install guide for the particular platforms.
    thanks,
    ph.

  • Sun sparc Solaris 10 patches for Oracle E-Business Suit 11.5.10.2 + 10g R2

    Hi Experts,
    Please note that we have SUN SOLARIS 10 64-bit Operating system Installed on our Server.
    I would like to setup the E-Business Suit 11.5.10.2 with 10gR2.
    I would like to know the patches required for the solaris 10 os to support the EBS 11i 10gr2 ?
    Kindly let me know ASAP.
    Regards
    Mohammed.

    I would like to setup the E-Business Suit 11.5.10.2 with 10gR2.
    I would like to know the patches required for the solaris 10 os to support the EBS 11i 10gr2 ?Recommendations To Install Oracle Applications 11i [ID 294932.1]
    11i Release Notes [ID 215868.1]
    Thanks,
    Hussein

  • Wfsdupld fails when run against 8.1.7 database on 64 bit Sun SPARC Solaris 8

    Attempting to run in the seed data.
    Platform is 64 bit Solaris v8
    Database is 8.1.7.0
    Workflow 2.6
    Everything is fine until we run the wfsdupld script. The script
    fails with
    ORA-29516 Aurora Assertion Failed: Assertion failure at
    joncomp.c:127
    jtc_active_clint_ncomp_slots (oracle/xml/parser/v2/DTD, 0)
    returned 0
    ORA-6512 at OWF_MGR.WF_EVENT_SYNCHRONIZE_PKG line 373
    Any ideas?

    I raised this as a TAR #1838186.995 and received the following
    workaround which does seem to have worked on 8.1.7.0 >>
    I have taken a look at bug 2034596 which suggests a problem with
    the 8.1.7.0 database. However, by upgrading the database to
    8.1.7.2 the error was replaced by a nullpointerexception.
    As a possible workaround it may be worth trying the following
    (on a 8.1.7.0 database):
    $ svrmgrl
    SVRMGR>connect internal
    SVRMGR>alter system flush shared_pool;
    SVRMGR>alter system flush shared_pool;
    SVRMGR>alter system flush shared_pool;
    SVRMGR>alter java class "java/io/Serializable" check;
    SVRMGR>alter system flush shared_pool;
    SVRMGR>alter system flush shared_pool;
    SVRMGR>alter system flush shared_pool;
    SVRMGR>shutdown immediate;
    SVRMGR> startup

  • Permission Denied error on RAC Install Sun SPARC Solaris-NetApps

    Our RAC Installation is failing when installing in silent mode the base install of Oracle RDBMS 10.2.0.1. During the process file emtgtctl is copied from node1 to node2. On node1 the file has the following permissions:
    -rwsr-s--x (note the user group and set-id "s" is on).
    Oracle user is performing the intsall and he is a member of oinstall.
    We get the error:
    "Permission Denied" and the install fails.
    We try and do the copy manually as well and this fails also.
    Any one ever run accross something like this?

    is oinstall the primary group for that user ?

  • Is fake utility program for sun sparc solaris 2.6 available.?

    Hai ,
    Fake is a IP address take over tool used in linux.
    "fake is a simple utility designed to enable the switching in of backup servers buy bringing up an additional interface and using arp spoofing to take over the ip address. Either additional physically or logical interfaces can be used."This is all about fake.
    I searched a lot to get fake utility for solaris 2.6.but i could't.
    Is any fake utility version for solaris .? or the same of its kinds.?
    Please help me
    Thank you
    Arun

    hai Alan,
    Let me specific on the problem.
    I developed a fail-over software for Linux servers(need 2 servers of same configuration). In this servers ,there are two modes , Active and passive mode. At a time one can be active,and other passive. Clients can communicate the with the servers through a common alias ip address. But the actual ip address of servers can be different.Normally Active server would be having the alias ip.
    When switching take place from active to passive mode,server will be assigned with its actual ip address. When switching takes place other passive server becomes active and its get common alias ip address.?
    This is the actual scenario . And fake is used in Linux to refresh the arp table of immediate switching device.
    But i came to know that solaris os would do it normally when it switches .?
    Is this possible with solaris.?

  • Web adi with R11 on sun sparc solaris platform

    we have been trying for months to get this product working without success. does anybody have any experience with using this product in the environment stated, and if they do, would they be willing to correspond via email to give us some assistance?
    despite months of trying to progress the issue via metalink, we have made nil progress.
    thanks in anticipation
    allen

    we have been trying for months to get this product working without success. does anybody have any experience with using this product in the environment stated, and if they do, would they be willing to correspond via email to give us some assistance?
    despite months of trying to progress the issue via metalink, we have made nil progress.
    thanks in anticipation
    allen

  • Is it Possible to install oracle 9i  32 bit on Sun Solaris Intel Edition

    Dear OTN Members ,
    It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
    Sun Solaris Intel Editon 2.8 . Please inform me on
    email :-
    [email protected]
    [email protected]
    Thanking You
    Piyush Patel
    - Server name :- pi.com
    - Filename
    - Date/Time
    - Browser + Version : Netscape 4.7
    - O/S + Version : Sun Solaris Intel Edition 2.8

    857211 wrote:
    I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
    Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
    http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
    http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
    However the Installation Guide for Database Client adds:
    "Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

  • Oracle 10g CRS autorecovery from network failures - Solaris with IPMP

    Hi all,
    Just wondering if anyone has experience with a setup similar to mine. Let me first apologise for the lengthy introduction that follows >.<
    A quick run-down of my implementation: Sun SPARC Solaris 10, Oracle CRS, ASM and RAC database patched to version 10.2.0.4 respectively, no third-party cluster software used for a 2-node cluster. Additionally, the SAN storage is attached directly with fiber cable to both servers, and the CRS files (OCR, voting disks) are always visible to the servers, there is no switch/hub between the server and the storage. There is IPMP configured for both the public and interconnect network devices. When performing the usual failover tests for IPMP, both the OS logs and the CRS logs show a failure detected, and a failover to the surviving network interface (on both the public and the private network devices).
    For the private interconnect, when both of the network devices are disabled (by manually disconnecting the network cables), this results in the 2nd node rebooting, and the CRS process starting, but unable to synchronize with the 1st node (which is running fine the whole time). Further, when I look at the CRS logs, it is able to correctly identify all the OCR files and voting disks. When the network connectivity is restored, both the OS and CRS logs reflect this connection has been repaired. However, the CRS logs at this point still state that node 1 (which is running fine) is down, and the 2nd node attempts to join the cluster as the master node. When I manually run the 'crsctl stop crs' and 'crsctl start crs' commands, this results in a message stating that the node is going to be rebooted to ensure cluster integrity, and the 2nd node reboots, starts the CRS daemons again at startup, and joins the cluster normally.
    For the public network, when the 2nd node is manually disconnected, the VIP is seen to not failover, and any attempts to connect to this node via the VIP result in a timeout. When connectivity is restored, as expected the OS and CRS logs acknowledge the recovery, and the VIP for node 2 automatically fails over, but the listener goes down as well. Using the 'srvctl start listener' command brings it up again, and everything is fine. During this whole process, the database instance runs fine on both nodes.
    From the case studies above, I can see that the network failures are detected by the Oracle Clusterware, and a simple command run once this failure is repaired restores full functionality to the RAC database. However, is there anyway to automate this recovery, for the 2 cases stated above, so that there is no need for manual intervention by the DBAs? I was able to test case 2 (public network) with the Oracle document 805969.1 (VIP does not relocate back to the original node after public network problem is resolved), is there a similar workaround for the interconnect?
    Any and all pointers would be appreciated, and again, sorry for the lengthy post.
    Edited by: NS Selvam on 16-Dec-2009 20:36
    changed some minor typos

    hi
    i ve given the shell script.i just need to run that i usually get the op like
    [root@rac-1 Desktop]# sh iscsi-corntab.sh
    Logging in to [iface: default, target: iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz, portal: 192.168.181.10,3260]
    Login to [iface: default, target: iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz, portal: 192.168.181.10,3260]: successfulthe script contains :
    iscsiadm -m node -T iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz -p 192.168.181.10 -l
    iscsiadm -m node -T iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz -p 192.168.181.10 --op update -n node.startup -v automatic
    (cd /dev/disk/by-path; ls -l *sayantan-chakraborty* | awk '{FS=" "; print $9 " " $10 " " $11}')
    [root@rac-1 Desktop]# (cd /dev/disk/by-path; ls -l *sayantan-chakraborty* | awk '{FS=" "; print $9 " " $10 " " $11}')
    ip-192.168.181.10:3260-iscsi-iqn.2010-02-23.de.sayantan-chakraborty:storage.disk1.amiens.sys1.xyz-lun-1 -> ../../sdc
    [root@rac-1 Desktop]# can you post the oput of ls /dev/iscsi ??you may get like this:
    [root@rac-1 Desktop]# ls /dev/iscsi
    xyz
    [root@rac-1 Desktop]#

  • NAS 4.0 evaluation version installation problem on SPARC/Solaris 2.8

    Installing the NAS 4.0 that was bundled with a Sun SPARC/Solaris 2.8 throws
    the following error:
    ( Installed with quick installation after correct installation of iWS 4.0,
    from documentation Directory Server installed is not needed since NAS
    installs its own)
    In December of 1999, the Sun-Netscape Alliance announced
    i P l a n e t A p p l i c a t i o n S e r v e r 6.0
    * 100% J2EE compliant
    * reliability and high availability for non-stop service required by
    the Enterprise
    * scalability to go the distance for unplanned success
    * the best performance of any web application server
    * broadest support of tools for J2EE application development
    * high performance and complete solutions for internet enterprise
    integration
    Information and availability of this next generation application server
    can be found at
    Please enter the install location [usr/netscape/server4]:
    Please enter the FULL PATH of the Web Server Instance to be used
    for NAS:
    /usr/netscape/server4/https-sofiana03.sofiana
    Please enter the password for Netscape Directory Server Adminstrator
    and Netscape Application Server Administrator.
    The password needs to tb be at least 8 characters. [changeit]:
    Installing Netscape core components
    Installing Netscape Server Family Core Components
    Installing Netscape Directory Suite
    Installing Administration Services
    Installing Netscape Application Server Suite
    Starting the NAS install ...Installing Netscape Application Server 4.0
    Core
    Binaries
    Extracting Netscape core components ...
    Extracting Netscape Server Family Core Components ...
    Extracting Netscape Core Java classes ...
    Extracting Java Runtime Environment ...
    Extracting Netscape Directory Server ...
    Extracting Netscape Directory Server Console ...
    Extracting Netscape Administration Server ...
    Extracting Netscape Console ...
    Extracting NAS Web Connector Component ...
    Extracting NAS Core Server Component ...
    Extracting NAS Administrator Component ...
    Extracting NAS Deployment Manager ...
    Extracting Netscape Application Server 4.0 Core Binaries ...
    Fatal Slapd The required field AdminDomain is not present in the install
    info fi
    le.
    Configuring Administration Server...
    Your parameters are now entered into the Administration Server
    database, and the Administration Server will be started.
    Changing ownership to admin user root...
    Setting up Admininistration Server Instance...
    ERROR: Ldap authentication failed (151:Unknown error.)
    Proceeding with installation of Netscape Application Server (NAS)...
    Reading userinput log file ..... done
    Configuring web server plugin
    ....../usr/netscape/server4/nas/bin/nas_postinstall
    ..ksh[49]: /usr/netscape/server4/https-sofiana03.sofiana/start.1007: cannot
    creat
    e
    mv: cannot access /usr/netscape/server4/https-sofiana03.sofiana/start.1007
    /usr/netscape/server4/nas/bin/nas_postinstall.ksh[188]:
    /usr/netscape/server4/ht
    tps-sofiana03.sofiana/config/.obj.conf: cannot create
    mv: cannot access
    /usr/netscape/server4/https-sofiana03.sofiana/config/.obj.conf
    ERROR: Variable KIVAwebdocs was not defined. This command:
    /usr/netscape/server4/nas/bin/.kconfns
    /usr/netscape/server4/https-sofia
    na03.sofiana /usr/netscape/server4/nas
    did not set the DocRoot variable correctly.
    Please make sure that this file exists and is executable:
    /usr/netscape/server4/nas/bin/.kconfns
    This NAS installation might not be succesful.
    Please enter the WebServer docs directory pathname:
    ==>
    What's WebServer docs? entered usr/netscape/server4/docs didn't help.
    Thanks for the support
    Pablo

    hi,
    Make sure that your network uses DNS naming.
    This error occurs when a machine is not correctly configured to use DNS naming. The default fully qualified host and domain name presented during installation is not correct.
    To successfully install, you need to provide a fully qualified domain name that consists of a local host name along with its domain name.
    for example yoursystem is a host name and yourdomain.com is a fully qualified domain name.
    regards,
    saravanan

  • SQLPlus and SQLLoader needed for Sparc Solaris 2.6

    Hello,
    for a test i need the two Oracle utilities SQLPlus and SQLLoader
    for Sparc Solaris 2.6.
    Is there a test version available ???
    Thanks for information.
    Olaf.
    null

    hai Alan,
    Let me specific on the problem.
    I developed a fail-over software for Linux servers(need 2 servers of same configuration). In this servers ,there are two modes , Active and passive mode. At a time one can be active,and other passive. Clients can communicate the with the servers through a common alias ip address. But the actual ip address of servers can be different.Normally Active server would be having the alias ip.
    When switching take place from active to passive mode,server will be assigned with its actual ip address. When switching takes place other passive server becomes active and its get common alias ip address.?
    This is the actual scenario . And fake is used in Linux to refresh the arp table of immediate switching device.
    But i came to know that solaris os would do it normally when it switches .?
    Is this possible with solaris.?

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

Maybe you are looking for