Oracle 9i (9.2.0.8) installed on cloned Windows 32-bit VMC instance

Hello,
We have a Windows 2003 Server 32-bit VMC instance running a copy of Oracle 9i (9.2.0.8) for QA/Dev work on one of our software products. This software is going to be moved over to an Oracle 10g database with our next product release. In order to test the results of moving our software to 10g, our system administrator cloned the current VMC instance (giving it a new IP and computer name).
I've found that adjusting the TNSNAMES.ORA for the database and Oracle client on the new (cloned) server instance still does not allow the Oracle listener to start properly on the new server... I'm suspecting that there are other areas of the database/client that need to be manually updated, to change any references to the old server name and/or IP address.
Has anyone had to go through this type of manual correction before, that can give me some tips on what areas/files to update so that the database/client will work properly on the new, cloned instance?
Thank you!
Sabrina G.

Could you please specify the error message displayed. And what does VMC stands for?
~ Madrid
http://hrivera99.blogspot.com/

Similar Messages

HT201468 Can I install on MacBook Windows 32-bit version

Can I install on MacBook Windows 32-bit version? I went through the installation and when I try to run the update on Windows (due to no internet access) I receive a comment that the Windows and Boot Camp Windows update don't agree? I downloaded Windows update through Boot Camp process?

From the same link posted earlier,
Mac model
Windows 8 64-bit
Windows 7 64-bit
Windows 7 32-bit
Windows Vista 64-bit
Windows Vista 32-bit
Windows XP 32-bit
MacBook Pro
(15-inch, Late 2011)
5
5
4
You can install W7 32-bit, but you will need to use Boot Camp Support Software 4.0.4033 drivers. You will need to run Bootcamp Assistant 4 from an older version of OSX. You can install OS X: Installing OS X on an external volume - Apple Support which has BCA 4.x and then install W7 32-bit.

Can't install itunes on windows 64 bit system

I tried to install itunes on my 64 bit machine, but with verson 6.0.5, it says this software doesnt support 64 bit systems. I tried to install an earlier version i think its 6.0.4.2 not sure, but it does install on my computer. When I try to open the program and quicktime, I get error box saying the program had a problem and couldn't open. Is there anyway to fix this problem, and is there a way to have the newest version of itunes to work on windows 64 bit?
Windows XP Pro

iTunes and QuickTime have never been supported on the 64-bit version of Windows (look here for the official statement). Some people have managed to get it working (at least tolerably), but from what I've read, a recent update from Microsoft has caused a lot of problems. You might try rolling back recent Windows updates and see if you can get things working again.

Installing JRE in windows IA64 bit machine

I need to install JRE in windows IA64 but I could not find it in the download page. Does any one know if this is still supported? Where can I download the JRE?
Thank you.

Do you specifically need JRE/JDK1.5? As per your reply, it does not seem to be so. In that case, just use JDK1.4
http://java.sun.com/j2se/1.4.2/system-configurations.html
It supports windows on Itanium. Also, as you mentioned Jrockit is another alternative. I am not sure, but IBM JDK is also an option, if they have already ported it

Problems Installing JDK 7u2 Windows 64-bit

I've downloaded the Development Kit but for some reason it won't install. I try clicking on it and nothing...
Help please.

The problem of installation of JDK 7u2 on Windows x64 is coming for both 32 bit and 64 bit versions of JDK.... However, i have tried installing them on Windows x86 (specifically Win XP SP3 x86 on VirtualBox 4.1.8) and the 32 bit version of JDK seems to be installing just fine on 32 bit Windows.
I might be wrong here but maybe the problem is that the 32 bit code on the JDK 7u2 may contain some 16bit code and so the Windows x64 is not able to run it (x64 OS not backwards compatible with 16 bit code). However the chances of this is slim since this is an update and the JDK 7u1 both 32 and 64 bit versions were fine.
However if this might have happened, then it is also possible that the 16bit code is also present in the 64 bit version of JDK 7u2 and thats why both the versions are not running on Windows x64.
Hoping they fix the issue soon. I need to do some testing and programming on Java 7.

Error numbers are 2502 and 2503 for installing iTunes for Windows 64 bits. How to fix?

Hey guys,
I cannot install iTunes (latest vision) on my new laptop (Windows 64 bits), and it says that the error numbers are 2502 and 2503...
Can someone tell me how to fix this?
Thank you!

Check your system date & time is correct.
Run the System File Checker: http://support.microsoft.com/kb/929833
If you still have problems try a creating a new user account with administrator rights, log into it, and attempt the install from there.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Was Not Installed Properly? Windows x64 Bit...

Hello,
I seem to be having a problem installing the latest version of iTunes onto my Windows XP Pro 64Bit Computer...
Once iTunes is installed, everytime i open it i get an error message pop-up, which reads the following...
"itunes was not properly installed. If you wish to import or burn CD's you need to reinstall itunes"
I reinstall itunes, only to get the exact same error. (Ive tried this a number of times now)
What could be the problem?
Many thanks.

Removing iTunes, QuickTime,
http://docs.info.apple.com/article.html?artnum=93698
Also see this for tips about using QuickTime:
http://docs.info.apple.com/article.html?artnum=303706
Apple K.B. articles
Using msconfig to solve conflicts:
http://docs.info.apple.com/article.html?artnum=302538
Tutorial and tips troubleshooting and removal:
http://docs.info.apple.com/article.html?artnum=93976

Installing iTunes on Windows 64 bit XP

Where can I find the installation file for iTunes, that can be installed on Window XP, 64-bit? The file I downloaded from itune.apple.com gives me an error stating "This iTunes installer requites Windows Vista 64-bit edition."

I'm sorry you are having problems with iTunes.
It is best to reach out to Apple http://bit.ly/OBKBjr to get additional information on that product.
Thanks!
Tamara H.
Follow us on Twitter @VZWSupport

Installed CS3 with windows vista bit AE won't open.

When my old faithful computer motherboard fried, I had to get a new computer with Windows Vista Home Premium.
I had CS3 loaded and working without a glich on my old XP computer.
I've loaded the whole CS3 suite, but when I open After Effects nothing happens. Using Window's Task Manager, under "Applications" After Effects doesn't show up as a running but under "Processes" the file "AfterFX.exe *32" is listed as running.
I've also tried uninstalling CS3 and reinstalling it in the directory "Program Files" rather than in the directory "Program Files (x86)" and nothing changed.
I've tried to opening all the other programs in CS3 with the similar results. Nothing opens, but their .exe files are listed under Task Managers "Processes".
I'm using this as a vol lic product, so I'm not sure how much tech support I can get.
Thank you for any help you can give me.

I'm sorry it didn't work. I probably don't have an answer for you since I'm not an expert or anything.
One thing I thought was weird was that the software version on my computer for the motherboard was version 6.xx (whatever) and the software I downloaded from the HP web was version 5.xx (whatever). It made it work though..
I think the update would be on the HP site, not the MSI site. Go to hp.com, downloads, and put in the name of your computer. Download/install whatever motherboard software they have. If that doesn't work, go to the adobe website and search for the document kb402213 and work through that. It's what the person you give Adobe $40 to help you is going to do.
Good luck. Hopefully this helps.

Cannot install iTune for Windows

Hi, I just bought an iPod nano and I tried to install iTune for windows 64 bit but I always get an error message concerning a Boujour service that it seems I don't have the rights to start.
Here are some of the installation events
Windows Installer a installé le produit. Nom du produit : iTunes. Version du produit : 9.2.1.5. Langue du produit : 1033. Fabricant : Apple Inc.. Réussite de l’installation ou état d’erreur : 1602.
Product: iTunes -- Installation failed.
Product: iTunes -- Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.
La description de l’ID d’événement 100 dans la source Bonjour Service est introuvable. Le composant qui a déclenché cet événement n’est pas installé sur l’ordinateur local ou l’installation est endommagée. Vous pouvez installer ou réparer le composant sur l’ordinateur local.
Si l’événement provient d’un autre ordinateur, les informations d’affichage doivent être enregistrées avec l’événement.
Les informations suivantes étaient incluses avec l’événement :
WSARecvMsg failed (87)
La ressource de message est présente mais le message ne se trouve pas dans la
table des chaînes ou des messages
What a waste of time and money
I hope you have a solution cause this device is completely useless without that software.
Thank you

In my case, netlimiter was conflicting with the bonjour service. Probably identifying it as a threat. Uninstalling netlimiter solved my installation problem but now I need an alternative to netlimiter

Install sqldeveloper on windows 7 64 Bit and Oracle 11.2

Hi,
how can I find the rigth jdk. I installed JDK on C:\Program Files\Java\jdk1.6.0_23.
I installed Oracle 11.2 including sqldeveloper. But I cannot find the correct folder to start sqldeveloper.
Where can I find this path?
When I include a path with java.exe I get the error "Unable to find a Java Virtual Machine. To point to a locacion of a Java Virtual Machine, pleaser refer to the Oracle9i Jdeveloper Install guide (jdev\install.html)" Where can I find this?
Thank you for your help
Siegwin

I am on Windows 7 64 bit. I see that installing Oracle 11.2 database installs SQL Developer also but that doesn't work. I get the .bat file not found crap. What I then did was do a seperate install of SQL Developer for 64 bit, but that does NOT install the jdk.
I then did the java install from:
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u25-download-346242.html
I selected: jdk-6u25-windows-x64.exe
I then point to the java.exe where this install loaded it (c:\program files\Java\jdk1.6.0_25\bin when I start up sql developer and it still gives the same error. I delete the SetJavaHome value in the sqldeveloper.conf file and try again over and over but it still gives the same error.
So, I have windows 7 - 64 bit operating system. I have Oracle 11.2 database installed. I have a seperate installation of SQL Developer 64 bit and I have the java jdk for 64 bit installed.
Nothing is working. Can anyone please steer me in the correct direction? Should I delete the second install of SQL Developer 64 bit and to an install of SQL Developer 32 bit?
Please help

Oracle 9I Database, and Mobile Server install history

Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
     1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
     2. Setup TCP/IP, and IPX/SPX networks
          Computer name YGGDRASILL
          Host name = YGGDRASILL
          Domain = CFR.MSSTATE.EDU
          Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
     3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
     4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
     5. Applied NT 4.0 SP6.
     6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
     7. Installed MDAC 2.6
     8. Installed Paint Shop Pro 7 for capturing error screens.
     9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
     10. Began install of Oracle Database Enterprise Edition with target parameters:
          Home directory = D:\Oracle\Ora92
          Database directory = D:\Oracle\oradata
          Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
          Port = 2030
          SID = FIA
          SYSTEM Password = phwphw
          SYS Password = phwphw
          SCOTT Password = phwphw
          DBSNMP Password = I left this one unassigned or empty.
          tnsnames.ora entry for remote TCP/IP connection
          a. CD 1 of 3 load
               1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
          b. CD 1 completed with only one problem, and CD 2 load begins.
          c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
               HTTP Server URLs
                    http://7778
                    https://4443
     12. Evaluation of install success begins.
          a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
          When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
          b. All other services start correctly.
          c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
          I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
          d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
               FIA.CFR.MSSTATE.EDU =
               (DESCRIPTION =
               (ADDRESS_LIST =
               (ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
               (CONNECT_DATA =
               (SERVER = DEDICATED)
               (SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
     13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
     14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
     15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
     16. Attempt to install Oracle Mobile Server Release 5.0.1
          a. File locations Screen
               Name: = OraLite501
               Path: = D:\OraLite501
          b. Select Mobile Server at Installation Screen
          c. Mobile Server Repository Database Information Screen
               Hostname = YGGDRASILL = hostname from tnsnames.ora
               Port = 2030 = same as Database port
                    It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
               Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
          d. Yes. At Do you want to install the Mobile Server Repository question.
          e. At Oracle Protocol Support, I checked the SPX box.
          f. Summary, and Install screens function to specifications.
          g. Mobile Server Repository Wizard
               Database System password:
                    Password = phwphw
          h. Mobile Server Repository Wizard
               Schema Name: fiafield
               Password : fiafield
          i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
     j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
     k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
          1. OraMTSRecoveryService is started
          2. OracleOraHome92HTTPService is started
          3. OracleOraHome92Listener is started on port
          4. OracleServiceFIA is started
          5. Apache.exe has the wtgias.dll loaded
          6. The Moble Server is not running and it should be if the documentation is correct.
          7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
     l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
          http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
     When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
     m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
     n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
     Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
     tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
          listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
          Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443

You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm

Unable to install Oracle VM Manager 3.0.2 on OEL 5.9 64 bit

Hi,
I am attempting to install Oracle VN Manager 3.0.2 on OEL 5.9 64 bit.
I follow the instructions published in Installation and Upgrade Guide Release 3.0 for x86 (E18548-02).
I use the "Standard Install", using a database on another server.
This is an Oracle 11gR2 SE database.
My installation stops at:
/runInstaller.sh
Step 5 of 9 : ADF ...
Retrieving Oracle Application Development Framework (ADF) ...
Unzipping Oracle ADF ...
Installing Oracle ADF ...
Step 6 of 9 : Oracle VM ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
[root@localhost cdrom]#
But according to the documentation, I shuld end up with:
Enabling Oracle VM Manager service ...
Installation Summary
Database configuration:
I don't see such a summary.
Event If I try
http://<IP address of the VM Manager server>:7001/ovm/console
https://<IP address of the VM Manager server>:7002/ovm/console
I get a "page not found"
Ports: 7001 amd 7002 are open, as described in the above documentation.
Does someone has experience with it?
Thanks by advance for any tips.
Kind Regards.

Hi,
There is probably no much difference between the two.
The reason I have tried with 3.0.2 is that the minimun required RAM for installation is 4G.
With 3.1.1 it is 6 G, and I have a limitation in memory.
Or does someone know if it possible to perform the installation with less RAM that what is specified?
Kind Regards.

Installing ArcSDE on a 32-bit server to connect to a Oracle DB on Itanium

I am looking for a resolution to have ArcSDE installed to work on a HP Intanium Server with Oracle 9i.
The present option is can I install ArcSDE on a 32-bit server and use the Net8 /Oracle Client connection to access the Oracle 9i Database on a seperate server that is running Itanium 64-bit.
Is this supported method

I'm not sure if it is fully supported, but is "should" work. I have used the 32-bit ArcSDE on a Win2000 server (also client win 2000 boxes with direct connect) to access a Solaris 9-64 Oracle 9iR2 server.
Bryan

Oracle 11g install hangs on windows 7

Hi,
I have downloaded Oracle 11g r2 64 bit install onto my windows system.
When i install, the install hangs after selecting the following
a) Create and configure a database
b) Desktop Class
After these, when I click on Next, the UI hangs.
Help will be appreciated.

Using paramFile: C:\Users\jeevan\Documents\My DAP Downloads\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_StarterDatabaseType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.db.bean.DBInstallSettings. Reason: [INS-07001] Value for property 'DBInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Users\jeevan\Documents\My DAP Downloads\database
\install\../stage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME COSMOS
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_client_OraMTSPortNumber 49157
oracle_install_db_ASMSNMPUserPassword Protected value, not to be logged
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_CustomInstall false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EMCentralAgentSelected
oracle_install_db_EMEmailAddress
oracle_install_db_EMSMTPServer
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_ReceiveEmailNotification false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_RecoveryBackUpPassword Protected value, not to be logged
oracle_install_db_RecoveryBackUpUsername
oracle_install_db_SID
oracle_install_db_SecureConfigDisabled false
oracle_install_db_SetOracleBase false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords Protected value, not to be logged
oracle_install_db_SuperAdminSamePasswdForAll Protected value, not to be logged
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseDBControl true
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@6da05bdb
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
SEVERE: You have not provided an email address.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Is this the problem????
Do you wish to remain uninformed of critical security issues in your configuration?
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Get view named [InstallOptionsUI]
INFO: InstallOptionsUI Entering Constructor
INFO: InstallOptionsUI Exiting Constructor
INFO: View for [InstallOptionsUI] is oracle.install.ivw.db.view.InstallOptionsUI@5ea07440
INFO: Initializing view <InstallOptionsUI> at state <installOptions>
INFO: Completed initializing view <InstallOptionsUI> at state <installOptions>
INFO: Displaying view <InstallOptionsUI> at state <installOptions>
INFO: Completed displaying view <InstallOptionsUI> at state <installOptions>
INFO: Loading view <InstallOptionsUI> at state <installOptions>
INFO: Completed loading view <InstallOptionsUI> at state <installOptions>
INFO: Localizing view <InstallOptionsUI> at state <installOptions>
INFO: Completed localizing view <InstallOptionsUI> at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state installOptions
INFO: Completed executing action at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: launchNETCA = true
INFO: Verifying route system_class
INFO: Get view named [SystemClassUI]
INFO: SystemClassUI Entering Constructor
INFO: SystemClassUI Exiting Constructor
INFO: View for [SystemClassUI] is oracle.install.ivw.db.view.SystemClassUI@164ca42b
INFO: Initializing view <SystemClassUI> at state <getSystemClass>
INFO: Completed initializing view <SystemClassUI> at state <getSystemClass>
INFO: Displaying view <SystemClassUI> at state <getSystemClass>
INFO: Completed displaying view <SystemClassUI> at state <getSystemClass>
INFO: Loading view <SystemClassUI> at state <getSystemClass>
INFO: Completed loading view <SystemClassUI> at state <getSystemClass>
INFO: Localizing view <SystemClassUI> at state <getSystemClass>
INFO: Completed localizing view <SystemClassUI> at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSystemClass
INFO: Completed executing action at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: SystemClassUI Entering & Exiting processInput
INFO: Validating view at state <getSystemClass>
INFO: Completed validating view at state <getSystemClass>
INFO: Validating state <getSystemClass>
INFO: Completed validating state <getSystemClass>
INFO: selectedSystemClass is :DESKTOP_CLASS
INFO: Verifying route desktop_class_yes
INFO: Get view named [QuickInstallUI]

Oracle 9i (9.2.0.8) installed on cloned Windows 32-bit VMC instance

Similar Messages

Maybe you are looking for