Oracle 9i and IDS under sun solaris 8

Need some help on oracle 9i and IDS under sun OS
i want some clariffication in my project.
If i develop my application under "sun solaris 8" OS for x86 with "oracle 9i"
as the backend and "IDS" (internet developer suite) as the front end, Can my
application be ported to the other environment i.e "SUNFIRE 280R" as the
server with sun solaris 8 as the OS and the same DB and front-end ?.
will there be any porting problems ?.
i am new to this environment.And i don't have SUNFIRE 280R server with me and
the customer won't supply it.
can anybody guide me please ?.(i am looking for the suggestions form those who
really worked on this environment.)
Murthy

Andrea...for a faster response, please post this question in the Database - Installation forum:
Database Installation

Similar Messages

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Memory Management comparison between Database 9208 and 11gR2 on Sun Solaris

Hi All,
Need some case studies which would help understand how Memory management is done in 9208 and 11gR2 on Sun Solaris SPARC
Also wanted some real time data which says 11gR2 manages Memory and CPU better than 9208. Some comparison Graph between 9i and 11gR2.
Any information will be of great help.
Thanks everyone for your support.
Thanks
Abdul

please see if below helps :
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr1_workshop2.pdf
http://www.dba-oracle.com/oracle11g/oracle_11g_memory_target_parameter.htm
Regards
Rajesh

Forte M2 and Oracle 8.1.6 on Sun Solaris 2.5.1

Anybody out there running Forte M2 with Oracle version 8.1.6?? The best
would be on a Sun Solaris 2.5.1 machine.
Our Oracle dba wants to upgrade for another application but Forte's
certification matrix only goes up to Oracle 8.0.3
Any experiences with version M and Oracle 8.1 would be helpful.
Jerry Fatcheric
Verizon (Formerly Bell Atlantic Mobile)

did this problem ever get solved. My problem seems similar, but, I get the "value not allowed" with the "end-of-file on communication channel" errors

Is it Possible to install oracle 9i 32 bit on Sun Solaris Intel Edition

Dear OTN Members ,
It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
Sun Solaris Intel Editon 2.8 . Please inform me on
email :-
[email protected]
[email protected]
Thanking You
Piyush Patel
- Server name :- pi.com
- Filename
- Date/Time
- Browser + Version : Netscape 4.7
- O/S + Version : Sun Solaris Intel Edition 2.8

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

Disable commands BUG under Sun-Solaris 10 ?

If you execute a disable commands while another user is justdoing a "force restructure",you got no error and the command "display application"shows the command-flag with false. But every user can still execute a "force restructer",even if the user log in later. This behaviour occurs under OS=Sun Solaris with essbase Version9.2.0.1,under windows with essbase version 9.2 Build 082 it worksfine. Is this a known BUG ?

I can't help you solaris tuning, but some things to look at.
1. Is the Essbase.cfg file the same on both servers? You might have parallel calculation turned on in one and not the other. Caches could also be set differently
2. Are the database caches set the same? This could impact performance as well
3. Are you doing an apples to apples comparison? Is one database loaded and recalculated many times while the other is not (or restructured or reloaded)

LOV under SUN SOLARIS

Hello my 'last hope',
My little problem is:
I developed an 'application' with forms 6 on a windows NT pc. This application has to run on a SUN Solaris pc. Everything is ok except: I can reach the OK / Cancel / Help button by keyboard navigation. I tried to find the solution in Oracle Terminal(mmmhhh not a nice tool).
waiting for my rescue,
Erik

What is your ESSLANG environment variable set to and does it support the characters you have in your outline?Tim TowApplied OLAP, Inc

Can't download Oracle 9i Database Server for SUN Solaris 32 bit platform

I was not able to download Oracle 9.2.0 DB Server for Sun Solaris 32 bit platform from OTN site this morning. Could someone please take a look at it?
Thanks,
Wen Davis

At this time, Oracle is offering only the 64- bit and we do not
have additional information if in the future 32-bit will be
offered.
Best Regards,
OTN Team

Oracle 7.3.4 on Sun Solaris 7

Help needed
Could anyone tell me whether Oracle 7.3.4, Oracle 8, Forms 6 and Forms 5 are available for Sun Solaris 7? Thanks

Oracle 7.3.4 i guess is not available on Solaris Intel but is avaliable on NCR-MP RAS
8.0.6
8i yes it is available
This is for intel.Sparc yes it should be available
forms 6.0 yes available on Intel Solaris
[email protected]

Installation of Oracle 9.0.1 on Sun Solaris 5.8

Hi,
I am trying to install Oracle9i Enterprise Edition (9.0.1) on Sun Solaris.
I started the installer and the installation proceeded fine. When the installer asked for the second CD, I aborted the installation as the second cd was not available to me at that time.
After obtaining all the 3 installation CDs, I started the installer once again and the installation GUI does not show up. This is what I get
$ ./runInstaller
$ Initializing Java Virtual Machine from /tmp/OraInstall/jre/bin/jre. Please wait..
This ".... Please wait..." prompt remains for ever.
Could somebody please give a pointer on what needs to be done to get the GUI running?
TIA,
Babu

Hi harsh
I'm no guru of Linux,
but heard somewhere u just cant make 9i to work with 128 MB RAM it needs at least 512.
u can refer a document
http://www.puschitz.com/OracleOnLinux.shtml
bye
Good Luck
Shalini

Generating reports in RTF and Excel on Sun Solaris

hi,
Could any one of u out there kindly tell me if it is possible to generate reports in RTF and Excel formats on a Report Server running in Sun Solaris machine. We use Reports 6i.
Because I am able to generate a report in RTF format on report running in Windows NT machine, but on Solaris i get a message that the Reports Server terminated abnormally!.
Thanks,
Prabhu S

Could you please tell us whether you fllowed any special procedures
or made some specific settings to launch RTF reports ?Can't help much, I'm afraid. The report and web server settings were
all made before I got here, and are not visible to me.
We can get RTF from report builder/generate-to-file and when running
reports on the web. Our servers are all Sun/Solaris boxes, although
we display on DOS boxes. Excel we get from a program, not from the
report server.
Report builder 6.0.8.10.1, database claims to be 8.1.7.0.0.
Sorry I can't help much more than saying "yes, it can be done".
Allan Plumb

ODBC connectivity between Oracle 11G and MSSQL Server on Solaris 10

When we were running in 10G, I was able to successfully configure hsodbc using unixODBC and freeTDS to allow for an ODBC connection between Oracle and MSSQL Server.
A few weeks ago we upgraded to 11G and I've been struggling to get the connectivity (dg4odbc) working.
In our 10g environment unixODBC and freeTDS were compiled as 32-bit. I have recompiled them as 64-bit and switched over to an 11G listener and I am getting the following error:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
here are my configuration files:
/usr/local/unixODBC/etc[PPRD]> more odbc.ini
[ODBC Data Sources]
identipass = MS SQL Server
[identipass]
Driver = /usr/local/freetds/lib/libtdsodbc.so
Setup = /usr/local/freetds/lib/libtdsodbc.so
Description = MS SQL Server
Trace = 1
TraceFile = /export/home/oracle/ODBC/odbc.trace
Server = stormwind
QuoteID = Yes
AnsiNPW = No
Database = identipass
Port = 1433
TDS_Version = 8.0
[Default]
Driver = /usr/local/freetds/lib/libtdsodbc.so
/usr/local/unixODBC/etc[PPRD]> more odbcinst.ini
[TDS]
Description=FreeTDS driver
Driver=/usr/local/freetds/lib/libtdsodbc.so
Setup=/usr/local/freetds/lib/libtdsodbc.so
Trace=Yes
TraceFile=/tmp/freetds.log
FileUsage=1
UsageCount=2
tnsnames.ora
identipass =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = localhost)(PORT = 1522))
(CONNECT_DATA =
(SID = identipass)
(HS = OK)
listener.ora
LISTENERODBC =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENERODBC=
(SID_LIST=
(SID_DESC=
(SID_NAME=identipass)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
(ENV="LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/hs/lib")
(PROGRAM=dg4odbc)
And finally, output from the trace file:
/u01/app/oracle/product/11.2.0/db_1/hs/log[PPRD]> more identipass_agt_1381.trc
Oracle Corporation --- THURSDAY NOV 18 2010 16:00:16.010
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- THURSDAY NOV 18 2010 16:00:16.008
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "Debug"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL32UTF8"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
HOSGIP returned value of "FALSE" for HS_FDS_SUPPORT_STATISTICS
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 64 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLSt
atistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "identipass"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:identipass
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=873
HOCXU_DRV_NCHAR=873
HOCXU_DB_CSET=873
HOCXU_SEM_VER=112000
Entered hgolofn at 2010/11/18-16:00:16
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/local/unixODBC/lib/libodbc.so"
Entered hgolofns at 2010/11/18-16:00:16
symbol_peflctx=0x7a715450
hoaerr:0
Exiting hgolofns at 2010/11/18-16:00:16
Exiting hgolofn, rc=0 at 2010/11/18-16:00:16
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 64 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2010/11/18-16:00:16
Entered hgolgon at 2010/11/18-16:00:16
reco:0, name:identipass, tflag:0
Entered hgosuec at 2010/11/18-16:00:16
Exiting hgosuec, rc=0 at 2010/11/18-16:00:16
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using identipass as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2010/11/18-16:00:16
HS_FDS_CONNECT_INFO = "identipass"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2010/11/18-16:00:16
dsn:identipass, name:identipass
optn:
Entered hgocip at 2010/11/18-16:00:16
dsn:identipass
Exiting hgocip, rc=0 at 2010/11/18-16:00:16
Exiting hgogenconstr, rc=0 at 2010/11/18-16:00:16
Entered hgopoer at 2010/11/18-16:00:16
hgopoer, line 233: got native error 0 and sqlstate ; message follows...
Exiting hgopoer, rc=0 at 2010/11/18-16:00:16
hgocont, line 2753: calling SqlDriverConnect got sqlstate
Exiting hgocont, rc=28500 at 2010/11/18-16:00:16 with error ptr FILE:hgocont.c LINE:2772 ID:Something other than invalid authoriza
tion
Exiting hgolgon, rc=28500 at 2010/11/18-16:00:16 with error ptr FILE:hgolgon.c LINE:781 ID:Calling hgocont
Entered hgoexit at 2010/11/18-16:00:16
Exiting hgoexit, rc=0
Can anyone help me see what I'm missing?

Thank you for your response.
I modified the envs LD_LIBRARY_PATH parameter in my SID_LIST_LISTENERODBC to be:
(ENV="LD_LIBRARY_PATH=/usr/local/freetds/lib:/usr/local/unixODBC/lib:/u01/app/oracle/product/11.2.0/db_1/lib:/
u01/app/oracle/product/11.2.0/db_1/hs/lib")
and bounced the listener, but I'm still getting the same error.
I do not have a lib64 directory in my Freetds installation, but all the files in the lib directory are 64-bit.
Here is a listing of my DG4ODBC init file:
/u01/app/oracle/product/11.2.0/db_1/hs/admin[PPRD]> more initidentipass.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = identipass
#HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_LEVEL = Debug
HS_FDS_SHAREABLE_NAME = /usr/local/unixODBC/lib/libodbc.so
HS_FDS_SUPPORT_STATISTICS=FALSE
HS_LANGUAGE=AMERICAN.AMERICA.WE8ISO8859P15
# ODBC specific environment variables
set ODBCINI=/usr/local/unixODBC/etc/odbc.ini
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
Thanks for your help with this!
Catina

Oracle 9 and PHP under Redhat 9

Hi,
I am planning to migrate my current web server from
redhat 7.x to 9 and I am currently evaluating what may
go wrong or need special attention before I actually
replace it.
After searching the archives and other lists I still
have a question :
a) oracle support
For the current setup I've downloaded and installed
the oracle 8i (8.1.5) in a separate machine, tar.gz
the lib directory in order to compile and run php with
oracle 8i in my production server.
Is this the best approach for Redhat 9 or should I try
to install oracle 9 which hopefully may have a
devel-only option ? Note that php needs to access
external oracle 8 servers which I do not mantain so compatibitity issues are important.
Regards.

I'm in a similar situation where i'm migrating from Win2k + PHP & want oracle support to connect to a remote server.
I got as far as installing redhat 9 & installing the oracle client.
I still can't get oracle to work in PHP though. doing a bit of research I dont think the redhat 9 RPM's come with oracle support compiled. I really dont want to be maintaining custom compiled php versions i'd rather just have up2date do it all. I hear you can get ODBC to work with oracle, but most of the stuff i've looked at covers doing this on windows, not linux.
If anyone out there has manager to get PHP & oracle working on RH9, without re-compiling PHP please let me know!

Sun Solaris 10,Upgrade 8 or higher,having issues with VxFS,for Oracle 11gr2

A while ago, we tried doing a prototype upgrade of our main Oracle 10g db to Oracle 11gr2.
The OS on which our Oracle 10g is running is Sun Solaris 10, upgrade 4.
According to Oracle 11gr2 documentation, we need Sun Solaris 10, upgrade 6 or higher for Oracle 11g2.
The filesystem we are using is VxFS, Veritas File System.
According to our system administrator, we had issues , making Sun Solar 10, upgrade 8 , work with the VxFS filesystem.
I was wondering if anybody is running Oracle 11g2 on Sun Solaris 10 upgrade 6 or higher with VxFS file system.
At present, our Oracle db upgrade project is on a hold, because of the above issue. So your help on this , can really help us in figuring out if there is an issue between VxFS filesystem and Sun Solaris 10 OS.
Thanks
Ashish

Hi Ashish,
We are not running Veritas Cluster file system.
We tried moving our Oracle 10g r2 db on ZFS ,before doing the upgrade and performance on ZFS was worst.
ZFS has certain memory parameter setting. If you did not configure that then ZFS will eat your complete system memory.
My system administrator, has gotten a copy of Solaris 10 upgrade 9 and will try that with VxFS.
I was curious to find out if folks are running Oracle 11g on Sun Solaris 10 with VxFS file system and if they had experienced any issue.If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Recently i installed Oracle database 11.2.0.2 on one of my test server. I have created two databases - one on ZFS and another on ASM.
Refer:
http://appsdbaworkshop.blogspot.com/2010/10/installation-of-11202-on-oracle-solaris.html
We dont have any performance issues. We are testing it for the performance benchmarks on both of the filesystem.
If you can Install Vxfs on Oracle Soalris 10 U9, then according to me there sholudn't be any limitations for an oracle database.
Regards,
X A H E E R

(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7

제품 : ORACLE SERVER
작성날짜 : 2003-06-02
(V7.3 ~ V8.X) ORACLE DB AUTO STARTUP/SHUTDOWN ON SUN SOLARIS 2.6/2.7
====================================================================
PURPOSE
이 자료는 O/S startup 시에 Oracle RDBMS 서비스를 자동으로 startup하
는 방법에 대한 자료이다.
Explanation
sun solaris 부팅 시 oracle DB를 auto startup하도록 하는 데 관련된 화일들이다.
/etc/inittab : o/s의 초기화 과정을 조절하는 화일
/etc/rc2 : 부팅 run-level 2 에서 사용되는 스크립트
/etc/rc0 : 부팅 run-level 0 에서 사용되는 스크립트
/etc/rc2.d/S99dbstart : /etc/init.d/dbstart 에 대한 symbolic link
/etc/rc0.d/K01dbshut : /etc/init.d/dbshut 에 대한 symbolic link
/var/opt/oracle/oratab : 시스템에 설치된 오라클 인스턴스에 대한 정보.
(참고)
/etc/init.d/dbstart, dbshut 화일은 super user(root)로 생성하시고,
symbolic link도 super user로 만드시기 바랍니다.
이 화일들은 super user가 owner가 되도록 하고, super user(root)만이
실행 가능하도록 해야 합니다.
1. 먼저 vi /etc/inittab 화일을 열어보십시오.
ap::sysinit:/sbin/autopush -f /etc/iu.ap
fs::sysinit:/sbin/rcS >/dev/console 2>&1 </dev/console
is:3:initdefault:
p3:s1234:powerfail:/usr/sbin/shutdown -y -i5 -g0 >/dev/console 2>&1
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
s1:1:wait:/usr/sbin/shutdown -y -iS -g0 >/dev/console 2>&1 </dev/console
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
s3:3:wait:/sbin/rc3 >/dev/console 2>&1 </dev/console
s5:5:wait:/sbin/rc5 >/dev/console 2>&1 </dev/console
s6:6:wait:/sbin/rc6 >/dev/console 2>&1 </dev/console
fw:0:wait:/sbin/uadmin 2 0 >/dev/console 2>&1 </dev/console
of:5:wait:/sbin/uadmin 2 6 >/dev/console 2>&1 </dev/console
rb:6:wait:/sbin/uadmin 2 1 >/dev/console 2>&1 </dev/console
sc:234:respawn:/usr/lib/saf/sac -t 300
co:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` console login: " -T
sun
-d /dev/console -l console -m ldterm,ttcompat
s1부터 s6까지 os file들에 대해 위와 같이 device redirection이 연결되어
있으면 됩니다.
s2:23:wait:/sbin/rc2 >/dev/console 2>&1 </dev/console
위와 같이 설정하면 run-level 2일 경우 /sbin/rc2 스크립트가 실행된다.
/sbin/rc2 는 /etc/rc2.d 디렉토리에 들어있는 스크립트를 실행한다.
만약 스크립트가 S 로 시작하면 /sbin/rc2 는 이 스크립트에 startup 파라미
터를 부여하고 여기서 지정된 프로세스를 실행시킨다.
따라서 /etc/rc2.d/S99dbstart 화일을 사용하여 dbstart를 실행한다.
shutdown 과정도 거의 비슷하다. /etc/inittab 에 다음과 같은 라인을 보자.
s0:0:wait:/sbin/rc0 >/dev/console 2>&1 </dev/console
이것은 /sbin/rc0 를 실행시키는데 /sbin/rc0 는 /etc/rc0.d 디렉토리에
들어있는 스크립트를 실행시킨다.
스크립트 이름이 K 로 시작하면 이것은 stop 파라미터를 갖고 실행되어서 이
스크립트에 지정된 프로세스를 정지시킨다.
따라서 /etc/rc0.d/K01dbshut 스크립트는 stop 파라미터를 갖고 실행되며
이 스크립트는 $ORACLE_HOME/bin/dbshut 스크립트를 실행시켜서 오라클을
shutdown 시킨다.
2. 그 다음에 vi /etc/rc2 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 2에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
set `/usr/bin/who -r`
if [ x$9 = "xS" -o x$9 = "x1" ]
then
echo 'The system is coming up. Please wait.'
BOOT=yes
3. 그 다음에 vi /etc/rc0 화일을 한번 열어보세요.
이 스크립트 화일은 run-level 0에서 사용되는 스크립트입니다.
특별히 수정할 내용은 없으나, 이 화일이 존재하는지 확인해 보십시오.
PATH=/usr/sbin:/usr/bin
echo 'The system is coming down. Please wait.'
# make sure /usr is mounted before proceeding since init scripts
# and this shell depend on things on /usr file system
/sbin/mount /usr > /dev/null 2>&1
# The following segment is for historical purposes.
# There should be nothing in /etc/shutdown.d.
if [ -d /etc/shutdown.d ]
then
for f in /etc/shutdown.d/*
if [ -s $f ]
then
/sbin/sh ${f}
fi
fi
4. /etc/init.d/dbstart 와 /etc/init.d/dbshut 스크립트를 만들어야 합니다.
그 내용은 각각 다음과 같이 한 줄로 작성합니다.
/etc/init.d/dbstart 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbstart
/etc/init.d/dbshut 화일은 다음과 같이 만듭니다.
su - <oracle_owner> -c <$ORACLE_HOME>/bin/dbshut
5. /etc/rc2.d/S99dbstart 화일을 /etc/init.d/dbstart에 대한 link로 생성합니다.
ln -s /etc/init.d/dbstart /etc/rc2.d/S99dbstart
6. /etc/rc0.d/K01dbshut 화일을 /etc/init.d/dbshut에 대한 link로 생성합니다.
ln -s /etc/init.d/dbshut /etc/rc0.d/K01dbshut
7. /var/opt/oracle/oratab 화일을 엽니다.
oratab 화일은 일반 텍스트 화일로서 시스템에 설치된 오라클 인스턴스에 대한
정보를 가지고 있는데 보통 3개의 필드로 이루어져 있으며,
첫번재 필드는 ORACLE_SID, 두번째 필드는 ORACLE_HOME, 세번째 필드는 Y 또는
N으로 구성되어 있습니다. 해당 인스턴스를 auto startup 시키려면 세번째
필드가 반드시 Y로 세팅되어 있어야 합니다.
아래에 예를 참조하세요.
ORA805:/oracle4/ora8/app/oracle/product/8.0.5:Y
ORA815:/oracle4/ora8i/app/oracle/product/8.1.5:Y
(주)
만약, <$ORACLE_HOME>/bin/dbstart 수행에 오류가 있으면 기존의 dbstart 화
일을 다른 path에 rename하고, 아래 내용만 가지고 <$ORACLE_HOME>/bin/ 아래
에 dbstart 화일을 다음과 같이 만든다.
svrmgrl <<EOF
connect internal
startup
exit
EOF
Example
none
Reference Documents
none

Hi Frank,
This is a bug in 9.0.1. It is fixed in 9.2 and
backported to 9.0.1.2 (rdbms 9.0.1.2 patch). Note that you
need to specify the sdo_indx_dims=2 in the parameter clause.
As a workaround in 9.0.1.0 you could do:
(1) remove the z coordinate (as you mentioned),
(2) set the srid to null (instead of 8307) both in
the geometries as well as the index metadata,
(3) set geodetic=false in the create-index parameters.
Hope that helps,
Ravi.

Oracle 9i and IDS under sun solaris 8

Similar Messages

Maybe you are looking for