Oracle 9i on Solaris 9 x86 Plataform Edition

Hi ,
I ´d really like to install Oracle 9i on Solaris 9 x86 Plataform Edition, but i don´t known the correct version !!
I think that the version below is probably correct but I´m not sure.
Oracle9i Release 2 (9.2.0.1)
Oracle9i Database Release 2 Enterprise/Standard Edition for Sun SPARC Solaris (32-bit)
Someone could help me please !!
Thanks a lot and sorry for bad english !!
Adalberto

See here
https://metalink.oracle.com/metalink/certify/certify.istore_welcome
Nicolas.

Similar Messages

Need to install ORACLE 9i on solaris x86

Hi All,
Can anyone tell me where I can get DB Oracle 9i for Solaris x86?
If not, what can I use?
Thanks.
Marfy

Unfortunately no chance. 9i was never supported on Solaris x86 and is desupported now on all other platforms. Use 10gR2 instead.
Werner

Error installing Oracle 10gR2 on Solaris Express Developer Edition

Hi
I'm trying to install Oracle Db 10gR2 on Solaris Express Developer Edition 1/08 for x86 but it fails with the following link error:
INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/bin/genclntsh
INFO: ld: fatal:
INFO: symbol `ntcontab' in file /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libn10.a(ntcontab.o): section [3] .data: size 0x60: symbol (address 0, size 0x70) lies outside of containing section
INFO: ld:
INFO: fatal:
INFO: File processing errors. No output written to
INFO: /export/home/u01/app/oracle/oracle/product/10.2.0/db_1/lib/libclntsh.so.10.1
INFO:
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: *** Error code 1
INFO: make: Fatal error: Command failed for target `client_sharedlib'
Any ideas would be appreciated.
Thanks

If your version of Solaris is not supported, see the support matrix, you are on your own. This is likely the case.

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
     at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
     at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
     at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
     at oracle.net.ca.InitialSetup.<init>(Unknown Source)
     at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000      /lib/libthread.so.1
0xfefd0000      /lib/libdl.so.1
0xfeed0000      /lib/libc.so.1
0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000      /usr/lib/libCrun.so.1
0xfee50000      /lib/libsocket.so.1
0xfedc0000      /lib/libnsl.so.1
0xfeda0000      /lib/libm.so.1
0xfeeb0000      /usr/lib/libsched.so.1
0xfe9a0000      /lib/libm.so.2
0xfed50000      /lib/libscf.so.1
0xfe980000      /lib/libdoor.so.1
0xfe960000      /lib/libuutil.so.1
0xfe940000      /lib/libmd5.so.1
0xfe920000      /lib/libmp.so.2
0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000      /usr/dt/lib/libXm.so.4
0xf0cf0000      /usr/openwin/lib/libXt.so.4
0xf0cc0000      /usr/openwin/lib/libXext.so.0
0xf1890000      /usr/openwin/lib/libXtst.so.1
0xf0c30000      /usr/openwin/lib/libX11.so.4
0xf0be0000      /usr/openwin/lib/libdps.so.5
0xf0a90000      /usr/openwin/lib/libSM.so.6
0xf0a70000      /usr/openwin/lib/libICE.so.6
0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000      /lib/libkstat.so.1
0xefc40000      /lib/libgen.so.1
0xefc20000      /lib/librt.so.1
0xefbf0000      /lib/libaio.so.1
0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1     localhost.localdomain     localhost
#192.168.100.1     bt.lan.home     bt
#192.168.100.5     jacek.lan.home     jacek
# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

Oracle InstantClient for Solaris x86

Hi,
Do you Oracle oracles foresee Instant Client upgrades for the Solaris x86 platform? It seems to be stuck at 10.1.0.3.
I ask because we just picked up four Oracle CPU licenses, installed RAC, and hoped to put all of our apps on those nifty AMD Opteron-based boxes that Sun is manufacturing these days.
Thanks!

Oracle never released a 9i port for Solaris on x86; There is however full
support (including a 64 bit version) of 10G

Oracle 9i for solaris x86

Hi.
I have solaris 10 x86, and I'd like to install oracle 9i in a dedicated zone.
The problem: where could I find a oracle 9i version for solaris 10 x86?
Thank you

Oracle never released a 9i port for Solaris on x86; There is however full
support (including a 64 bit version) of 10G

Oracle Database for solaris x86

dear gurus i have a little question...
The Oracle Database 9i is not available for Solaris Operating System (x86) ????
in that link only i can see... SPARC:
http://www.oracle.com/technology/software/products/oracle9i/index.html
Please
would you confirm that?

The official status of Oracle 9i for this platform is "Oracle 9i certification is NOT planned on this platform".
The nearest available release for this platform is 10gR1.
~ Madrid

Oracle EE 8.x for Solaris x86

Sorry for this post.
I would like to know (excatly location) where I can d/l Oracle EE
for Solaris x86 like linux one ?
I already send email to technet support one week ago. There is no
reply yet.
KK
null

Hi Nicolas,
great thanks!
Is the information available on the web site or is it something internal ?
I've tried to follow your link:
Operating System: Solaris Operating System x86 Version 10
Oracle Database - Enterprise Edition Version 10gR2
But could not find any such directions.
Also this is the Enterprise version, what about the Standard version ?
Thank you!

Help with oracle 10g install on solaris x86

hi, i downloaded solaris 10 from oracle site (sol-10-u8-ga-x86-dvd.iso) and i have installed it on vmware. i was going through the installation guide for oracle 10 for solaris x86 and while on the pre-installation steps, i issued this command
# /bin/isainfo -kv
and it gave me
# 64-bit amd64 kernel modules
instead of
# 32-bit i386 kernel modules
as the guide expected.
please what can i do, cos the guide says if i dont see the later, the installation cannot complete.
thnx

First check you Operating System Bit information whether it is 64 or 32 bit , for this first check any of the command path
Example ls command
$ which ls
/usr/sbin/ls
$ file /usr/sbin/ls
It will show you whether your OS is 64 bit or 32 bit and accordingly download the software from below link ,if it is showing 64 bit os then you have to download 64 bit database software .
http://www.oracle.com/technetwork/database/database10g/downloads/index.html

Installation of Solaris 8 (x86 Platform Edition

Hi guys,
I have downloaded the Solaris 8 for intel version and burnt them into CDs. (3 CDs). I tried to download the Solaris (x86 Platform Edition) Device Configuration Assistant Boot Diskette, but instead of downloading, it opens in another Internet explorer window. I tried pressing shift while downloading, that doesn't work. And also I tried to boot using the Solaris installation CD for installing, it says cannot boot from CDROM. Please help me. How can I proceed with installation?
With regards,
Amin

Well I had undergone the same problem, what I did was then use Netscape Enterprise Browser, and there is worked just fine, and was able to save the file onto my pc, without it being opening in an another window, so if possible use Netscape Browser and try and see what happens. Hope this helps you.
Samir Patel

Oracle 9i for Solaris

Hello everybody,
where is Oracle 9i for Solaris x86 system ? I can not find, and on Oracle web isnt :-(
Thanks, PK

cd is right.<br>
<br>
Check the matrix compatibility here<br>
<br>
Nicolas.

Re: RAC installation in Solaris x86 (VMWARE)

Hi,
I was trying to install Oracle RAC in solaris x86 via VMWARE tool . I installed node1 and node 2 but when node 1 running , unable to start node2 ,
showing error " failed to open virtual machine node-2 locking of attached media failed "
Result code: VBOX_E_INVALID_OBJECT_STATE"
I am feeling that this is happening due to shared folder but how to resolve?
Appreciate if anyone can help
Thanks in advance

I was trying to install Oracle RAC in solaris x86 via VMWARE tool . I installed node1 and node 2 but when node 1 running , unable to start node2 ,
showing error " failed to open virtual machine node-2 locking of attached media failed "
Result code: VBOX_E_INVALID_OBJECT_STATE"
I am feeling that this is happening due to shared folder but how to resolve?
Appreciate if anyone can helpfor installation what link you have fallowd..?please post the link...
refer below link...check any helpful to you...
https://forums.oracle.com/forums/thread.jspa?threadID=2153312

Weblogic Server 9.2 MP 3 for Solaris x86

Does anyone know where I can download weblogic server 9.2 mp 3 for Solarix x86. I have spent my entire day looking for it in support.oracle.com (metalink) and oracle download pages but nothing has turned up so far.

You can always ask via support.
There is a download on edelivery.oracle.com. Select Oracle BEA then Solaris x86 32bit - then click on BEA WebLogic Media Pack for Sun Solaris x86 (x86, x86-64)
You'll see a 9.2 MP3 ISV download, I'm not sure if that's exactly the same as the normal one or if it's only for ISV's, you'd have to ask support.

MessageQ on Solaris x86?

Is Oracle MessageQ available for Solaris x86?
Thanks
Simon

No, only Solaris SPARC. If you have a need for Oracle MessageQ on Solaris x86, I suggest you talk to your Oracle Fusion Middleware sales person.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Oracle 9i on Solaris 9 x86 Plataform Edition

Similar Messages

Maybe you are looking for