Oracle 9i Release 2 silent installation

Has anyone tested Oracle 9i Release 2 silent installation ?
I'm using the "Oracle Embedded Installation Resource Kit" to setup a silent installation, but I can't move even a step further. I'm starting the installation by activating the command file runSilentInstall.cmd , but happens simply nothing ???!!! Only the response file is being created in the TEMP directory, and nothing more.
In the resource kit stays that it has been tested with "9.0.1 Enterprise Edition
and Standard Edition on Windows (NT/Win2K) and the Solaris platform. However, the
resource kit should be able to install Oracle9i 9.x on any platform."
Dimce

I've just found out, that if I use setup.exe from the Oracle installation CDs (Disk1\install\win32\setup.exe) then the installation starts (and goes on) well. But if I use the setup.exe copied in my stage directory (from where I start the installation) it doesn't.
It's the one and same file in both places.
Any comments ?
Dimce

Similar Messages

  • Oracle Linux Release 5 Silent installation

    How do you setup a silent installation on an Oracle Linux Release 5 ISO?

    I think the answer to that is Kickstart. Using kickstart, a system administrator can create a single file containing the answers to all the questions that would normally be asked during a typical installation. You can find information about it in the standard installation guide at https://linux.oracle.com/documentation/ chapter 31.

  • Oracle Client 11g Release 2 silent installation.

    Hi, I try to make a silent installation of oracle client 11g release 2 for windows 7 enterprise edition.
    I'm familiar with the response file, and how to create this in earlyer versions.
    But the "-record -destinationFile <filepath>" switch do not work, and when I run "setup -help" the -record switch is gone.
    How do you create a response file with 11g release 2?
    Best regards
    Lansti

    Hey Hans - We shouldn't have to read the manual each time a new installer comes out...why would there be a need to constantly redo how the installers works from a general standpoint (like -record)?? Stupid doesn't even begin to describe it.
    Edited by: user10051782 on Jun 2, 2010 1:07 PM

  • Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86

    Hi All,
    I'm hoping somebody can shed some light on this issue.
    I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
    I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
    I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
    RESPONSE FILE:
    ## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
    ## Specify values for the variables listed below to customize ##
    ## your installation. ##
    ## Each variable is associated with a comment. The comment ##
    ## can help to populate the variables with the appropriate ##
    ## values.                                   ##
    # Do not change the following system generated value.
    oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
    # This variable holds the hostname of the system as set by the user.
    # It can be used to force the installation to use an alternative
    # hostname rather than using the first hostname found on the system
    # (e.g., for systems with multiple hostnames and network interfaces).
    ORACLE_HOSTNAME=
    # Unix group to be set for the inventory directory.
    UNIX_GROUP_NAME=
    # Inventory location.
    INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
    # Specify the languages in which the components will be installed.
    # en : English ja : Japanese
    # fr : French ko : Korean
    # ar : Arabic es : Latin American Spanish
    # bn : Bengali lv : Latvian
    # pt_BR: Brazilian Portuguese lt : Lithuanian
    # bg : Bulgarian ms : Malay
    # fr_CA: Canadian French es_MX: Mexican Spanish
    # ca : Catalan no : Norwegian
    # hr : Croatian pl : Polish
    # cs : Czech pt : Portuguese
    # da : Danish ro : Romanian
    # nl : Dutch ru : Russian
    # ar_EG: Egyptian zh_CN: Simplified Chinese
    # en_GB: English (Great Britain) sk : Slovak
    # et : Estonian sl : Slovenian
    # fi : Finnish es_ES: Spanish
    # de : German sv : Swedish
    # el : Greek th : Thai
    # iw : Hebrew zh_TW: Traditional Chinese
    # hu : Hungarian tr : Turkish
    # is : Icelandic uk : Ukrainian
    # in : Indonesian vi : Vietnamese
    # it : Italian
    # Example : SELECTED_LANGUAGES=en,fr,ja
    SELECTED_LANGUAGES=en,en_GB
    # Complete path of the Oracle Home
    ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
    # Complete path of the Oracle Base.
    ORACLE_BASE=C:\Oracle
    #Name : INSTALL_TYPE
    #Datatype : String
    #Description: Installation type of the component.
    # The following choices are available. The value should contain
    # only one of these choices.
    # InstantClient : InstantClient
    # Administrator : Administrator
    # Runtime : Runtime
    # Custom : Custom
    #Example : INSTALL_TYPE = "Administrator"
    oracle.install.client.installType=Custom
    # Name : oracle.install.client.customComponents
    # Datatype : StringList
    # This property is considered only if INSTALL_TYPE is set to "Custom"
    # Description: List of Client Components you would like to install
    # The following choices are available. You may specify any
    # combination of these choices. The components you choose should
    # be specified in the form "internal-component-name:version"
    # Below is a list of components you may specify to install.
    # oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
    # oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
    # oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
    # oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
    # oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
    # oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
    # oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
    # oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
    # oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
    # oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
    # oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
    # oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
    # oracle.network.client:11.2.0.1.0 -- "Oracle Net"
    # oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
    # oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
    # oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
    # oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
    # oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
    # oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
    # Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
    oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
    #Name : MTS_PORT
    #Datatype : int
    #Description: Port number to be used for by the Oracle MTS Recovery Service to listen
    #          for requests. This needs to be entered in case oracle.ntoramts is
    #     selected in the list of custom components in custom install
    #Example : MTS_PORT = 2030
    oracle.install.client.oramtsPortNumber=49152
    # Host name to be used for by the Oracle Scheduler Agent.
    # This needs to be entered in case oracle.rdbms.scheduler is selected in the
    # list of custom components during custom install
    # Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
    oracle.install.client.schedulerAgentHostName=
    # Port number to be used for by the Oracle Scheduler Agent.
    # This needs to be entered in case oracle.rdbms.scheduler is selected in the
    # list of custom components during custom install
    # Example: oracle.install.client.schedulerAgentPortNumber = 1500
    oracle.install.client.schedulerAgentPortNumber=
    LOG FILE TO FOLLOW

    LOG FILE:
    Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
    The commandline for unzip:
    Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
    INFO: Verifying target environment...
    INFO: Checking whether the IP address of the localhost could be determined...
    INFO: Completed verification of target environment.
    INFO: Inventory exists: false
    INFO: Registering setup bean
    INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
    WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
    INFO: Setting Response file data to the Installer
    WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
    INFO: Building Flow
    INFO: Building the flow graph
    INFO: Loaded state init
    INFO: Loaded state clientInstallType
    INFO: Loaded state productLanguage
    INFO: Loaded state getOracleHome
    INFO: Loaded state prereqExecutionDecider
    INFO: Loaded state checkPrereqs
    INFO: Loaded state postPrereqs
    INFO: Loaded state summary
    INFO: Loaded state clientCustomInstall
    INFO: Loaded state schedulerAgent
    INFO: Loaded state mtsDialog
    INFO: Loaded state setup
    INFO: Loaded state finish
    INFO: Linking states
    INFO: State[checkPrereqs]: route=success; to=summary
    INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
    INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
    INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
    INFO: State[clientInstallType]: route=ic_no; to=productLanguage
    INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
    INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
    INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
    INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
    INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
    INFO: State[init]: route=success; to=clientInstallType
    INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
    INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
    INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
    INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
    INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
    INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
    INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
    INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
    INFO: State[setup]: route=success; to=finish
    INFO: State[summary]: route=success; to=setup
    INFO: Successfully built the flow
    INFO: Opening bean stores from which the beans can be loaded
    INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
    INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
    INFO: Translating external format into raw format
    INFO: Loaded BeanStore using the flow data source
    INFO: Registering the flow data beans
    INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
    INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
    INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
    INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
    INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
    INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
    INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
    INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
    INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
    INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
    INFO: Set value for bean ClientSetupBean
    INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
    INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
    INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
    INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
    INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
    INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
    WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
    INFO: Closing bean stores from which the beans can be loaded
    INFO: Registering the flow views
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
    INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
    INFO: Initial values of Setup Properties :
    PROPERTY VALUE
    COLLECTOR_IGNORE_CONFIGURATION false
    COLLECTOR_IGNORE_FAILURES false
    COLLECTOR_RESPONSE_FILE
    DECLINE_SECURITY_UPDATES false
    FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
    ient\install\../stage/products.xml
    INSTALL_TYPE Custom
    INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
    MYORACLESUPPORT_PASSWORD Protected value, not to be logged
    MYORACLESUPPORT_USERNAME
    ORACLE_BASE C:\Oracle
    ORACLE_HOME C:\Oracle\product\11.2.0\client_1
    ORACLE_HOSTNAME GBA-P74444432
    PROXY_HOST
    PROXY_PORT
    PROXY_PWD Protected value, not to be logged
    PROXY_USER
    SECURITY_UPDATES_VIA_MYORACLESUPPORT true
    SELECTED_LANGUAGES {"en","en_GB"}
    oracle_install_LaunchNetCA false
    oracle_install_NoMigration true
    oracle_install_RACInstall false
    oracle_install_WindowsSystemDirectory
    oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
    0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
    .0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
    1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
    0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
    et_2:11.2.0.1.0"}
    oracle_install_client_OraMTSPortNumber 49152
    oracle_install_db_ConfigurationType
    oracle_install_db_InstallEdition EE
    oracle_install_db_InstallType
    INFO: Launching Oracle Client Installer
    INFO: Started executing the flow in SILENT mode
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state init
    INFO: Waiting for completion all forked tasks at state init
    INFO: All forked task are completed at state init
    INFO: Completed background operations
    INFO: Executing action at state init
    INFO: Completed executing action at state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <init>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <init>
    WARNING: Validation disabled for the state init
    INFO: Completed validating state <init>
    INFO: Verifying route success
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientInstallType
    INFO: Completed executing action at state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientInstallType>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <clientInstallType>
    WARNING: Validation disabled for the state clientInstallType
    INFO: Completed validating state <clientInstallType>
    INFO: In Transition of InstallTypesAction:
    INFO: Verifying route ic_no
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state productLanguage
    INFO: Completed executing action at state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <productLanguage>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <productLanguage>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
    INFO: Completed validating state <productLanguage>
    INFO: Verifying route productlanguage_yes
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state getOracleHome
    INFO: Completed executing action at state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <getOracleHome>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <getOracleHome>
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: InstallAreaControl exists: false
    INFO: Checking:NEW_HOME
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:COMP
    INFO: Checking:ORCA_HOME
    INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
    INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: inventory location isC:\Program Files\Oracle\Inventory
    INFO: size estimation for Administratorinstall is 1046.229476928711
    INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
    INFO: Completed validating state <getOracleHome>
    INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
    INFO: Verifying route INVENTORY_NO_CUSTOM_YES
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state clientCustomInstall
    INFO: Re-loading component config bean
    INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    INFO: Translating external format into raw format
    INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
    INFO: Resolving dependencies
    INFO: Completed executing action at state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <clientCustomInstall>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <clientCustomInstall>
    INFO: Completed validating state <clientCustomInstall>
    INFO: Verifying route TO_ENDCUSTOM
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state prereqExecutionDecider
    INFO: Completed executing action at state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Moved to state <prereqExecutionDecider>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <prereqExecutionDecider>
    WARNING: Validation disabled for the state prereqExecutionDecider
    INFO: Completed validating state <prereqExecutionDecider>
    INFO: Verifying route executeprereqs
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Executing action at state checkPrereqs
    INFO: custom prereq file name: oracle.client_Custom.xml
    INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
    INFO: isCustomRefDataFilePresent: false
    INFO: Completed executing action at state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Finishing all forked tasks at state checkPrereqs
    INFO: Waiting for completion all forked tasks at state checkPrereqs
    INFO: Creating PrereqChecker Job for leaf task Physical Memory
    INFO: Creating CompositePrereqChecker Job for container task Free Space
    INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
    INFO: Creating PrereqChecker Job for leaf task Architecture
    INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
    INFO: CVU tracingEnabled = false
    INFO: Nodes are prepared for verification.
    INFO: *********************************************
    INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    INFO: Expected Value:128MB (131072.0KB)
    INFO: Actual Value:1023.5547MB (1048120.0KB)
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
    INFO: Severity:IGNORABLE
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    INFO: Expected Value:130MB
    INFO: Actual Value:21.3053GB
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:SUCCESSFUL
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    INFO: Expected Value:32-bit
    INFO: Actual Value:32-bit
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    INFO: Verification Result for Node:GBA-P74444432
    WARNING: Result values are not available for this verification task
    INFO: All forked task are completed at state checkPrereqs
    INFO: Completed background operations
    INFO: Moved to state <checkPrereqs>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <checkPrereqs>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
    INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
    SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
    CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
    ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
    INFO: Advice is ABORT
    INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
    INFO: Completed validating state <checkPrereqs>
    INFO: Terminating all background operations
    INFO: Terminated all background operations
    WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
    INFO: Finding the most appropriate exit status for the current application
    INFO: Exit Status is -3
    INFO: Shutdown Oracle Client Installer
    INFO: Unloading Setup Driver

  • Oracle BPA architect 11g Silent Installations on windows

    hello,
    how can I make a silent install of Oracle business process architect on Windows XP ?
    (I think it can be done using an XML file, if so, thank you for giving me the file silent.xml and the procedure to do the installation of Oracle business process architect iin silent mode on Windows).
    Thank you for your help

    Hello,
    In fact, I found a difficult in installing the BPA publisher 11g. I did like mention in the oracle guide for installation but when i am adaptating the files , i cannot found the XML files?
    Do u think that way is not necessary fot the BPA Publisher 11g??
    Thanks

  • Oracle 9iFS Release 9.02 - Installation Custom Tablespace

    Hello All,
    I have stumbled on a small problem here, It's not critical for my test environment, however I thought I should flag it up as it will obviously affect anyone with a Production system.
    After installing 9iFS Release 9.02 ( into my 9iAS middle tier home ) I run the ifsconfig utility.
    It connects to my 9i database (another server) and then authenticates to my 9iAS Infrastructure OID (also another server)
    The configuration goes fine until I reache the select tablespaces screen. If I select custom tablespaces, then no tablespaces are shown and the drop down boxes are inoperative. I cancelled the ifsconfig and started it up again, with the same result.
    The work round for me was to just drop my (empty) IFS tablespaces and resize my users tablespace, then I used that.
    Anyone know what the problem might be ???
    Regards to all
    Steve

    Hi all,
    I realized that the disk that my first datafile in primary tablespace (TSPRIMARY_LOC1) fulled while configuration so i created a second data file in primary tablespace(TSPRIMARY_LOC1) at different disk.
    And I finished succesfully configuration.
    I restart server and deployed 9iFS servlet to OC4J by running "ifsdeployear" and
    i connect to Oracle Enterprise Manager Web Site
    i can see processes about 9ifs.
    intranet:53140
    intranet:53141
    OC4J_iFS
    But when i clicked the "intranet:53140"
    i received the following error;
    500 Internal Server Error
    oracle.cabo.servlet.event.UnhandledEventException,page=Page[name=ias/oracle_ifs/
    ifsdc,type=oracle_ifs,ctxType1=oracle_ias,farm=ias9i.intranet.iski.local,target=
    intranet:53140,ctxName1=ias9i.intranet.iski.local],event=PageEvent[name=doLoad]
    at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
    at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
    at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
    at oracle.cabo.servlet.BajaServlet.doGet(Unknown Source)
    at oracle.sysman.emSDK.eml.svlt.EMServlet.doGet(EMServlet.java:241)
    at oracle.sysman.eml.app.ConsoleSN.doGet(ConsoleSN.java:71)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
    at
    com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:6
    6)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
    at
    com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatche
    r.java:539)
    at
    com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequest
    Dispatcher.java:285)
    at
    com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.ja
    va:771)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:107)
    at
    EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:8
    02)
    at java.lang.Thread.run(Thread.java:484)
    How can i pass the error.
    Best Regards,
    Yusuf

  • Client 11g silent installation guidance

    Hello everyone,
    I am just starting my journey into the world of Oracle. Typically it has not been a smooth start hence my post here.
    I have been asked to arrange a silent install of the 11g Client (v11.1.0.6.21 specifically) onto a Windows XP machine. I diligently did some reading on the net as there is zero documentation or install media here - just the installation files. I managed to create a response file using "setup.exe -record -destinationFile newbie.rsp", modified some minor settings and tried to:
         setup.exe -silent -noconfig -nowait -responsefile "c:\newbie.rsp"
    Unfortunately I just cannot get the text-based "Oracle Universal Installer" window to hide during the install, regardless of what I put in the response file. So I am not doing very well on the "silent install" front.
    Then I found this thread:     Oracle Client 11g Release 2 silent installation.
    However the installer I have doesn't seem to have the "save the current session as a record file" option.
    So, would someone be kind enough to point me in the direction of some up to date doco I can read please? I am keen to learn all about this but I just can't seem to find a place to start.
    Any suggestions are greatly received and appreciated.
    Best regards,
    Troy

    Thanks for the swift response Ansiktet!
    +>>There is an default response file provided in the installation directory,+
    Great. The only file & folder structure I have starts from:
         \install
              \access\...
              \images\...
              \reource\....
              access_setup.bat
              addLangs.bat
              oraparam.ini
              oui.exe
              unzip.exe
         \stage
              \Actions\...
              \Components\...
              \Queries
              install1.jar
              invDetails.properties
              products.xml
              shiphomeinfo.properties
              shiphomeproperties.xml
         setup.exe
    I have had a look through and can't find a sample response file. Does this file & folder structure match what you were expecting I should have? And if so, where might I find the sample please?
    +>> you can make it easy for you and just edit this one, its quite self-explaining.+
    I found a few examples on the net and the "-record" option generated a very nice one for me to start from.
    The problem is, regardless of what I put in, the OUI command-line style window always seems to be displayed.
    I have put in lines such as:
         FROM_LOCATION="\\Software\Apps\Third party\Oracle\Client 11g\stage\products.xml"
         ACCEPT_LICENSE_AGREEMENT=true
         SHOW_SPLASH_SCREEN=false
         SHOW_WELCOME_PAGE=false
         SHOW_RELEASE_NOTES=false
         SHOW_SUMMARY_PAGE=false
         SHOW_CUSTOM_TREE_PAGE=false
         SHOW_COMPONENT_LOCATIONS_PAGE=false
         SHOW_INSTALL_PROGRESS_PAGE=false
         SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
         SHOW_CONFIG_TOOL_PAGE=false
    +>> Then you run it with the same command you used before.+
    The comment in the other thread implied this method has been superceeded. Are you familiar with the newer method and where I might find some doco on it (to educate myself)?
    Thanks again,
    Troy

  • What is Oracle 10g Release 2 Real Application Cluster?

    Hello Guys,
    I have been working in Oracle database 9i for last 2 years. Just using the simple features of oracle. Now our data have grown and company wants to enhance the database version and also want to perform load balancing at oracle's end.
    Have heard a lot about Oracle RAC, but i am not sure what actually is oracle rac and its installation.
    What is the difference between Oracle 10g Release 2 Enterprise Installation and Oracle 10g Release 2 Real Application Cluster installation. Are these 2 different softwares available on different CDs or RAC is only a different way to install oracle 10g database in RAC mode.
    Please clerify and explain. Sorry this is a very beginner level question but i want to learn it and implement it.
    Regards,
    Imran Baig

    What is the difference between Oracle 10g Release 2
    Enterprise Installation and Oracle 10g Release 2 Real
    Application Cluster installation. Are these 2Enterprise Edition is the database management software provided byu Oracle.
    RAC is an extension to the Standard and Enterprise Edition to permit the same database to be managed from two or more computers. (Withe Enterprise Edition, it is an extra cost option. With Standard Edition, it is included in the price, since SE has other limitations.)
    Conceptually, RAC is simple - IF you understand the difference between Instance and Database. RAC = 1 database managed by many instances
    Physically, RAC requires a healthy investment in infrastructure - the infrastructure and the RAC software addresses the question: how do you get several computers able to read and write to the same disk and the same block without data corruption?
    If you are serious about RAC, take a course. If you are in the US, consider http://www.psoug.org as an 'Intro to RAC' course provider.

  • Oracle Client Silent Installation

    I tried to do A Silent Installation with an Oracle Client CD Release 10.1.02
    I record the installation with the command line
    setup.exe -record -destinationFile c:\client.rsp
    then I am installing a custom Installation. every thing seems to be alright.
    then I am installing an Oracle Client with the this responsefile
    setup.exe -silent responseFile c:\client.rsp
    the Installation runs automatically but
    many components are missing such as
    networking; ODBC; OLE DB .....
    Is this a bug in the record of the destinationFile or is there a speciell way to record a custopm installation with all the selected features?
    here the recorded responseFile:
    ## Copyright (c) 1999, 2004 Oracle. All rights reserved. ##
    ## Specify values for the variables listed below to customize ##
    ## your installation. ##
    ## Each variable is associated with a comment. The comment ##
    ## identifies the variable type. ##
    ## Please specify the values in the following format: ##
    ## Type Example ##
    ## String "Sample Value" ##
    ## Boolean True or False ##
    ## Number 1000 ##
    ## StringList {"String value 1","String Value 2"} ##
    ## The values that are given as <Value Required> need to be ##
    ## specified for a silent installation to be successful. ##
    ## This response file is generated by Oracle Software ##
    ## Packager. ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #Name : UNIX_GROUP_NAME
    #Datatype : String
    #Description: Unix-Gruppe, die in dem Bestandsverzeichnis festgelegt werden soll. Nur auf Unix-Plattformen gültig.
    #Beispiel: UNIX_GROUP_NAME = "install"
    UNIX_GROUP_NAME=" "
    #Name : FROM_LOCATION
    #Datatype : String
    #Description: Vollständiger Pfad zu products.xml.
    #Beispiel: FROM_LOCATION = "..\stage\products.xml"
    FROM_LOCATION="C:\orainst\stage\products.xml"
    #Name : FROM_LOCATION_CD_LABEL
    #Datatype : String
    #Description: Diese Variable sollte nur in Installationen mit mehreren CDs benutzt werden. Sie umfasst die Beschriftung der CD, auf der die Datei "products.xml" gespeichert ist. Die Beschriftung ist in der Datei "disk.label" in demselben Verzeichnis wie products.xml gespeichert.
    #Beispiel: FROM_LOCATION_CD_LABEL = "CD Label"
    FROM_LOCATION_CD_LABEL=<Nicht festgelegter Wert>
    #Name : ORACLE_HOME
    #Datatype : String
    #Description: Vollständiger Pfad des Oracle-Standardverzeichnisses.
    #Beispiel: ORACLE_HOME = "C:\OHOME1"
    ORACLE_HOME="C:\Oracle\product\10.1.0\Client_1"
    #Name : ORACLE_HOME_NAME
    #Datatype : String
    #Description: Name des Oracle-Standardverzeichnisses. Wird beim Erstellen von Ordnern und Diensten verwendet.
    #Beispiel: ORACLE_HOME_NAME = "OHOME1"
    ORACLE_HOME_NAME="test"
    #Name : TOPLEVEL_COMPONENT
    #Datatype : StringList
    #Description: Die Komponente der obersten Ebene, die während der aktuellen Session installiert werden muss.
    #Beispiel: TOPLEVEL_COMPONENT = {"oracle.client","10.1.0.2.0"}
    TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_SPLASH_SCREEN
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der anfängliche Splash-Screen in OUI angezeigt werden soll.
    #Beispiel: SHOW_SPLASH_SCREEN = true
    SHOW_SPLASH_SCREEN=true
    #Name : SHOW_WELCOME_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Willkommen-Seite in OUI angezeigt werden soll.
    #Beispiel: SHOW_WELCOME_PAGE = false
    SHOW_WELCOME_PAGE=true
    #Name : SHOW_CUSTOM_TREE_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit der benutzerdefinierten Verzeichnisbaumstruktur in OUI angezeigt werden soll.
    #Auf dieser Seite können Abhängigkeiten markiert bzw. Markierungen entfernt werden. Diese Seite wird nur bei benutzerdefinierter Installationsart angezeigt.
    #Beispiel: SHOW_CUSTOM_TREE_PAGE = false
    SHOW_CUSTOM_TREE_PAGE=true
    #Name : SHOW_COMPONENT_LOCATIONS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Verzeichnis der Komponente in OUI angezeigt werden soll.
    #Diese Seite wird nur angezeigt, wenn Produkte vorhanden sind, deren installiertes Verzeichnis geändert werden kann.
    #Wenn Sie diesen Wert auf False festlegen, kann der Benutzer keine alternativen Verzeichnisse angeben.
    #Beispiel: SHOW_COMPONENT_LOCATIONS_PAGE = false
    SHOW_COMPONENT_LOCATIONS_PAGE=true
    #Name : SHOW_SUMMARY_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Übersichtsseite in OUI angezeigt werden soll.
    # Auf dieser Seite wird eine Liste aller während dieser Session zu installierenden Komponenten angezeigt.
    #Beispiel: SHOW_SUMMARY_PAGE = true
    SHOW_SUMMARY_PAGE=true
    #Name : SHOW_INSTALL_PROGRESS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über den Installationsstatus in OUI angezeigt werden soll.
    #Auf dieser Seite wird der aktuelle Installationsstatus angezeigt. Sie werden dabei darüber informiert, welches Produkt installiert und welche Datei gegenwärtig kopiert wird.
    #Beispiel: SHOW_INSTALL_PROGRESS_PAGE = true
    SHOW_INSTALL_PROGRESS_PAGE=true
    #Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den erforderlichen Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste aller erforderlichen Konfigurationsassistenten angezeigt, die Bestandteil der Installation sind.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_REQUIRED_CONFIG_TOOL_PAGE = true
    SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
    #Name : SHOW_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste der Konfigurationsassistenten angezeigt, die Bestandteil der Installation und so konfiguriert sind, dass sie automatisch gestartet werden.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_CONFIG_TOOL_PAGE = true
    SHOW_CONFIG_TOOL_PAGE=true
    #Name : SHOW_RELEASE_NOTES
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Versionshinweise dieser Installation am Ende der Installation angezeigt werden sollen.
    #Dieses Dialogfeld kann aus dem Register Ende der Installation gestartet werden und enthält die Liste mit Versionshinweisen, die für die gerade installierten Produkte zur Verfügung stehen.
    # In diesem Fall muss auch die Variable SHOW_END_SESSION_PAGE auf True festgelegt werden.
    #Beispiel: SHOW_RELEASE_NOTES = true
    SHOW_RELEASE_NOTES=true
    #Name : SHOW_ROOTSH_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn das Dialogfeld "Bestätigung", in dem die Ausführung des Skripts root.sh gefordert wird, in OUI angezeigt werden soll.
    #Nur auf UNIX-Plattformen gültig.
    #Beispiel: SHOW_ROOTSH_CONFIRMATION = true
    SHOW_ROOTSH_CONFIRMATION=true
    #Name : SHOW_END_SESSION_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Ende der Session in OUI angezeigt werden soll.
    #Auf dieser Seite wird angezeigt, ob die Installation erfolgreich abgeschlossen wurde.
    #Beispiel: SHOW_END_SESSION_PAGE = true
    SHOW_END_SESSION_PAGE=true
    #Name : SHOW_EXIT_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Bestätigung beim Beenden von OUI angezeigt werden soll.
    #Beispiel: SHOW_EXIT_CONFIRMATION = true
    SHOW_EXIT_CONFIRMATION=true
    #Name : NEXT_SESSION
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer zu dem Register Dateiverzeichnisse zurückgehen können, um eine weitere Installation vorzunehmen. Dieses Flag muss außerdem auf True festgelegt werden, um eine weitere Antwortdatei zu verarbeiten (siehe NEXT_SESSION_RESPONSE).
    #Beispiel: NEXT_SESSION = true
    NEXT_SESSION=false
    #Name : NEXT_SESSION_ON_FAIL
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer eine andere Session aufrufen können, auch wenn die aktuelle Installations-Session nicht erfolgreich war. Dieses Flag ist nur relevant, wenn NEXT_SESSION auf True festgelegt wurde.
    #Beispiel: NEXT_SESSION_ON_FAIL = true
    NEXT_SESSION_ON_FAIL=true
    #Name : NEXT_SESSION_RESPONSE
    #Datatype : String
    #Description: Gibt optional den vollständigen Pfad der Antwortdatei der nächsten Session an. Wenn nur ein Dateiname angegeben wird, wird die Antwortdatei aus dem Verzeichnis <TEMP>/oraInstall abgerufen. Diese Variable ist nur aktiv, wenn NEXT_SESSION auf True festgelegt ist.
    #Beispiel: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
    NEXT_SESSION_RESPONSE=<Nicht festgelegter Wert>
    #Name : DEINSTALL_LIST
    #Datatype : StringList
    #Description: Liste der Komponenten, die während einer Deinstallations-Session deinstalliert werden sollen.
    #Beispiel: DEINSTALL_LIST = {"oracle.client","10.1.0.2.0"}
    DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_DEINSTALL_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Deinstallationsbestätigung während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_CONFIRMATION = true
    SHOW_DEINSTALL_CONFIRMATION=true
    #Name : SHOW_DEINSTALL_PROGRESS
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der Deinstallationsfortschritt während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_PROGRESS = true
    SHOW_DEINSTALL_PROGRESS=true
    #Name : ACCEPT_LICENSE_AGREEMENT
    #Datatype : Boolean
    #Description: Wenn Sie für diese Variable True festlegen, stimmen Sie dem Lizenzvertrag zu. Diese Variable wird nur für vollautomatische Installationen verwendet.
    #Beispiel: ACCEPT_LICENSE_AGREEMENT = true
    ACCEPT_LICENSE_AGREEMENT=false
    #Name : SELECTED_LANGUAGES
    #Datatype : StringList
    #Description: Sprachen, in denen die Komponenten installiert werden.
    #Component : oracle.client
    SELECTED_LANGUAGES={"de","en"}
    #Name : INSTALL_TYPE
    #Datatype : String
    #Description: Installationsart der Komponente.
    #Component : oracle.client
    INSTALL_TYPE="Benutzerdefiniert"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # netca, : Oracle Net-Konfigurationasssistent
    # netca_deinst, : Oracle Net-Konfigurationsassistent - Skript deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"netca"}
    #Component : oracle.networking.netca
    oracle.networking.netca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # vipca, : Virtual Private IP-Konfigurationsassistent
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"vipca"}
    #Component : oracle.options.ops.vipca
    oracle.options.ops.vipca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # LocalConfig, : Oracle Cluster Synchronization Service deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"LocalConfig"}
    #Component : oracle.options.ops.csscommon
    oracle.options.ops.csscommon:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : s_recodHTTPPort
    #Datatype : String
    #Description: HTTP listener port for the recod service
    #Component : oracle.cartridges.ordmts
    s_recodHTTPPort="2030"

    I tried to do A Silent Installation with an Oracle Client CD Release 10.1.02
    I record the installation with the command line
    setup.exe -record -destinationFile c:\client.rsp
    then I am installing a custom Installation. every thing seems to be alright.
    then I am installing an Oracle Client with the this responsefile
    setup.exe -silent responseFile c:\client.rsp
    the Installation runs automatically but
    many components are missing such as
    networking; ODBC; OLE DB .....
    Is this a bug in the record of the destinationFile or is there a speciell way to record a custopm installation with all the selected features?
    here the recorded responseFile:
    ## Copyright (c) 1999, 2004 Oracle. All rights reserved. ##
    ## Specify values for the variables listed below to customize ##
    ## your installation. ##
    ## Each variable is associated with a comment. The comment ##
    ## identifies the variable type. ##
    ## Please specify the values in the following format: ##
    ## Type Example ##
    ## String "Sample Value" ##
    ## Boolean True or False ##
    ## Number 1000 ##
    ## StringList {"String value 1","String Value 2"} ##
    ## The values that are given as <Value Required> need to be ##
    ## specified for a silent installation to be successful. ##
    ## This response file is generated by Oracle Software ##
    ## Packager. ##
    RESPONSEFILE_VERSION=2.2.1.0.0
    #Name : UNIX_GROUP_NAME
    #Datatype : String
    #Description: Unix-Gruppe, die in dem Bestandsverzeichnis festgelegt werden soll. Nur auf Unix-Plattformen gültig.
    #Beispiel: UNIX_GROUP_NAME = "install"
    UNIX_GROUP_NAME=" "
    #Name : FROM_LOCATION
    #Datatype : String
    #Description: Vollständiger Pfad zu products.xml.
    #Beispiel: FROM_LOCATION = "..\stage\products.xml"
    FROM_LOCATION="C:\orainst\stage\products.xml"
    #Name : FROM_LOCATION_CD_LABEL
    #Datatype : String
    #Description: Diese Variable sollte nur in Installationen mit mehreren CDs benutzt werden. Sie umfasst die Beschriftung der CD, auf der die Datei "products.xml" gespeichert ist. Die Beschriftung ist in der Datei "disk.label" in demselben Verzeichnis wie products.xml gespeichert.
    #Beispiel: FROM_LOCATION_CD_LABEL = "CD Label"
    FROM_LOCATION_CD_LABEL=<Nicht festgelegter Wert>
    #Name : ORACLE_HOME
    #Datatype : String
    #Description: Vollständiger Pfad des Oracle-Standardverzeichnisses.
    #Beispiel: ORACLE_HOME = "C:\OHOME1"
    ORACLE_HOME="C:\Oracle\product\10.1.0\Client_1"
    #Name : ORACLE_HOME_NAME
    #Datatype : String
    #Description: Name des Oracle-Standardverzeichnisses. Wird beim Erstellen von Ordnern und Diensten verwendet.
    #Beispiel: ORACLE_HOME_NAME = "OHOME1"
    ORACLE_HOME_NAME="test"
    #Name : TOPLEVEL_COMPONENT
    #Datatype : StringList
    #Description: Die Komponente der obersten Ebene, die während der aktuellen Session installiert werden muss.
    #Beispiel: TOPLEVEL_COMPONENT = {"oracle.client","10.1.0.2.0"}
    TOPLEVEL_COMPONENT={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_SPLASH_SCREEN
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der anfängliche Splash-Screen in OUI angezeigt werden soll.
    #Beispiel: SHOW_SPLASH_SCREEN = true
    SHOW_SPLASH_SCREEN=true
    #Name : SHOW_WELCOME_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Willkommen-Seite in OUI angezeigt werden soll.
    #Beispiel: SHOW_WELCOME_PAGE = false
    SHOW_WELCOME_PAGE=true
    #Name : SHOW_CUSTOM_TREE_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit der benutzerdefinierten Verzeichnisbaumstruktur in OUI angezeigt werden soll.
    #Auf dieser Seite können Abhängigkeiten markiert bzw. Markierungen entfernt werden. Diese Seite wird nur bei benutzerdefinierter Installationsart angezeigt.
    #Beispiel: SHOW_CUSTOM_TREE_PAGE = false
    SHOW_CUSTOM_TREE_PAGE=true
    #Name : SHOW_COMPONENT_LOCATIONS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Verzeichnis der Komponente in OUI angezeigt werden soll.
    #Diese Seite wird nur angezeigt, wenn Produkte vorhanden sind, deren installiertes Verzeichnis geändert werden kann.
    #Wenn Sie diesen Wert auf False festlegen, kann der Benutzer keine alternativen Verzeichnisse angeben.
    #Beispiel: SHOW_COMPONENT_LOCATIONS_PAGE = false
    SHOW_COMPONENT_LOCATIONS_PAGE=true
    #Name : SHOW_SUMMARY_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Übersichtsseite in OUI angezeigt werden soll.
    # Auf dieser Seite wird eine Liste aller während dieser Session zu installierenden Komponenten angezeigt.
    #Beispiel: SHOW_SUMMARY_PAGE = true
    SHOW_SUMMARY_PAGE=true
    #Name : SHOW_INSTALL_PROGRESS_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über den Installationsstatus in OUI angezeigt werden soll.
    #Auf dieser Seite wird der aktuelle Installationsstatus angezeigt. Sie werden dabei darüber informiert, welches Produkt installiert und welche Datei gegenwärtig kopiert wird.
    #Beispiel: SHOW_INSTALL_PROGRESS_PAGE = true
    SHOW_INSTALL_PROGRESS_PAGE=true
    #Name : SHOW_REQUIRED_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den erforderlichen Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste aller erforderlichen Konfigurationsassistenten angezeigt, die Bestandteil der Installation sind.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_REQUIRED_CONFIG_TOOL_PAGE = true
    SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
    #Name : SHOW_CONFIG_TOOL_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite mit den Konfigurationsassistenten in OUI angezeigt werden soll.
    #Auf dieser Seite wird eine Liste der Konfigurationsassistenten angezeigt, die Bestandteil der Installation und so konfiguriert sind, dass sie automatisch gestartet werden.
    #Sie erhalten Informationen über den Status jedes Assistenten, einschließlich Fehlermeldungen mit detaillierten Informationen über die Ursache des Fehlers.
    #Beispiel: SHOW_CONFIG_TOOL_PAGE = true
    SHOW_CONFIG_TOOL_PAGE=true
    #Name : SHOW_RELEASE_NOTES
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Versionshinweise dieser Installation am Ende der Installation angezeigt werden sollen.
    #Dieses Dialogfeld kann aus dem Register Ende der Installation gestartet werden und enthält die Liste mit Versionshinweisen, die für die gerade installierten Produkte zur Verfügung stehen.
    # In diesem Fall muss auch die Variable SHOW_END_SESSION_PAGE auf True festgelegt werden.
    #Beispiel: SHOW_RELEASE_NOTES = true
    SHOW_RELEASE_NOTES=true
    #Name : SHOW_ROOTSH_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn das Dialogfeld "Bestätigung", in dem die Ausführung des Skripts root.sh gefordert wird, in OUI angezeigt werden soll.
    #Nur auf UNIX-Plattformen gültig.
    #Beispiel: SHOW_ROOTSH_CONFIRMATION = true
    SHOW_ROOTSH_CONFIRMATION=true
    #Name : SHOW_END_SESSION_PAGE
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Seite über das Ende der Session in OUI angezeigt werden soll.
    #Auf dieser Seite wird angezeigt, ob die Installation erfolgreich abgeschlossen wurde.
    #Beispiel: SHOW_END_SESSION_PAGE = true
    SHOW_END_SESSION_PAGE=true
    #Name : SHOW_EXIT_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Bestätigung beim Beenden von OUI angezeigt werden soll.
    #Beispiel: SHOW_EXIT_CONFIRMATION = true
    SHOW_EXIT_CONFIRMATION=true
    #Name : NEXT_SESSION
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer zu dem Register Dateiverzeichnisse zurückgehen können, um eine weitere Installation vorzunehmen. Dieses Flag muss außerdem auf True festgelegt werden, um eine weitere Antwortdatei zu verarbeiten (siehe NEXT_SESSION_RESPONSE).
    #Beispiel: NEXT_SESSION = true
    NEXT_SESSION=false
    #Name : NEXT_SESSION_ON_FAIL
    #Datatype : Boolean
    #Description: Auf True festlegen, damit Benutzer eine andere Session aufrufen können, auch wenn die aktuelle Installations-Session nicht erfolgreich war. Dieses Flag ist nur relevant, wenn NEXT_SESSION auf True festgelegt wurde.
    #Beispiel: NEXT_SESSION_ON_FAIL = true
    NEXT_SESSION_ON_FAIL=true
    #Name : NEXT_SESSION_RESPONSE
    #Datatype : String
    #Description: Gibt optional den vollständigen Pfad der Antwortdatei der nächsten Session an. Wenn nur ein Dateiname angegeben wird, wird die Antwortdatei aus dem Verzeichnis <TEMP>/oraInstall abgerufen. Diese Variable ist nur aktiv, wenn NEXT_SESSION auf True festgelegt ist.
    #Beispiel: NEXT_SESSION_RESPONSE = "nextinstall.rsp"
    NEXT_SESSION_RESPONSE=<Nicht festgelegter Wert>
    #Name : DEINSTALL_LIST
    #Datatype : StringList
    #Description: Liste der Komponenten, die während einer Deinstallations-Session deinstalliert werden sollen.
    #Beispiel: DEINSTALL_LIST = {"oracle.client","10.1.0.2.0"}
    DEINSTALL_LIST={"oracle.client","10.1.0.2.0"}
    #Name : SHOW_DEINSTALL_CONFIRMATION
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn die Deinstallationsbestätigung während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_CONFIRMATION = true
    SHOW_DEINSTALL_CONFIRMATION=true
    #Name : SHOW_DEINSTALL_PROGRESS
    #Datatype : Boolean
    #Description: Auf True festlegen, wenn der Deinstallationsfortschritt während einer Deinstallations-Session benötigt wird.
    #Beispiel: SHOW_DEINSTALL_PROGRESS = true
    SHOW_DEINSTALL_PROGRESS=true
    #Name : ACCEPT_LICENSE_AGREEMENT
    #Datatype : Boolean
    #Description: Wenn Sie für diese Variable True festlegen, stimmen Sie dem Lizenzvertrag zu. Diese Variable wird nur für vollautomatische Installationen verwendet.
    #Beispiel: ACCEPT_LICENSE_AGREEMENT = true
    ACCEPT_LICENSE_AGREEMENT=false
    #Name : SELECTED_LANGUAGES
    #Datatype : StringList
    #Description: Sprachen, in denen die Komponenten installiert werden.
    #Component : oracle.client
    SELECTED_LANGUAGES={"de","en"}
    #Name : INSTALL_TYPE
    #Datatype : String
    #Description: Installationsart der Komponente.
    #Component : oracle.client
    INSTALL_TYPE="Benutzerdefiniert"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # netca, : Oracle Net-Konfigurationasssistent
    # netca_deinst, : Oracle Net-Konfigurationsassistent - Skript deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"netca"}
    #Component : oracle.networking.netca
    oracle.networking.netca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # vipca, : Virtual Private IP-Konfigurationsassistent
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"vipca"}
    #Component : oracle.options.ops.vipca
    oracle.options.ops.vipca:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : OPTIONAL_CONFIG_TOOLS
    #Datatype : String
    #Description: #Sie haben folgende Auswahlmöglichkeiten. Der Wert sollte nur eine dieser Auswahlmöglichkeiten enthalten.
    #Die Auswahl sollte folgende Form aufweisen: Interner Name : Externer Name. Geben Sie für die Festlegung des Wertes den internen Namen an.Liste optionaler Konfigurationsassistenten, die gestartet werden müssen.
    # LocalConfig, : Oracle Cluster Synchronization Service deinstallieren
    #Beispiel: OPTIONAL_CONFIG_TOOLS = {"LocalConfig"}
    #Component : oracle.options.ops.csscommon
    oracle.options.ops.csscommon:OPTIONAL_CONFIG_TOOLS="{}"
    #Name : s_recodHTTPPort
    #Datatype : String
    #Description: HTTP listener port for the recod service
    #Component : oracle.cartridges.ordmts
    s_recodHTTPPort="2030"

  • Error in Silent Installation of Oracle Database 10g R2

    Hi All,
    I want to install oracle DB10gR2 through silent installation(through command) and got the following error druing the prerequesties checks...
    Anyone can pl. let me know how to ignore tis error or continue with this installation as we normally do in GUI instllation.
    chk d below log for silent installation ...
    =================================================================
    Performing check for Kernel
    Checking kernel parameters
    Checking for semmsl=250; found semmsl=250. Passed
    Checking for semmns=32000; found semmns=32000. Passed
    Checking for semopm=100; found semopm=32. Failed <<<<
    Checking for semmni=128; found semmni=128. Passed
    Checking for shmmax=536870912; found shmmax=33554432. Failed <<<<
    Checking for shmmni=4096; found shmmni=4096. Passed
    Checking for shmall=2097152; found shmall=2097152. Passed
    Checking for file-max=65536; found file-max=52371. Failed <<<<
    Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
    Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=32768 - 61000. Failed <<<<
    Checking for rmem_default=262144; found rmem_default=65535. Failed <<<<
    Checking for rmem_max=262144; found rmem_max=65535. Failed <<<<
    Checking for wmem_default=262144; found wmem_default=65535. Failed <<<<
    Checking for wmem_max=262144; found wmem_max=65535. Failed <<<<
    Check complete. The overall result of this check is: Failed <<<<
    Check complete: Failed <<<<
    Problem: The kernel parameters do not meet the minimum requirements (see above).
    Recommendation: Perform operating system specific instructions to update the kernel parameters.
    =======================================================================
    Performing check for GLIBC
    Checking Recommended glibc version
    Expected result: ATLEAST=2.3.2-95.27
    Actual Result: 2.3.2-95.3
    Check complete. The overall result of this check is: Failed <<<<
    Performing check for TotalMemory
    ===============================================================
    Checking physical memory requirements ...
    Expected result: 922MB
    Actual Result: 496MB
    Check complete. The overall result of this check is: Failed <<<<
    Check complete: Failed <<<<
    Problem: The system does not have sufficient physical memory to perform the install.
    Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.
    ===============================================================

    Hi Pierre,
    thats fine that I should nt contuinue the installation if the prerequisties isnt match
    but my question is "if we are doing the same installation in GUI based then we have to select that failed components and verify it again, i.e. I select that failed component and retry it (that the same thing done by me) and its working perfectly..." and my installation is successfully completed with any errors.
    So, how can I do the same thing through command line, IF I want to retry for the failed components?
    FYI ...Log for kernel parameters, RPM and Memory...
    ==========================================================
    Performing check for Kernel
    Checking kernel parameters
    Checking for semmsl=250; found semmsl=250. Passed
    Checking for semmns=32000; found semmns=32000. Passed
    Checking for semopm=100; found semopm=100. Passed
    Checking for semmni=128; found semmni=128. Passed
    Checking for shmmax=536870912; found shmmax=536870912. Passed
    Checking for shmmni=4096; found shmmni=4096. Passed
    Checking for shmall=2097152; found shmall=2097152. Passed
    Checking for file-max=65536; found file-max=65536. Passed
    Checking for VERSION=2.4.21; found VERSION=2.4.21-4.ELsmp. Passed
    Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000. Passed
    Checking for rmem_default=262144; found rmem_default=262144. Passed
    Checking for rmem_max=262144; found rmem_max=262144. Passed
    Checking for wmem_default=262144; found wmem_default=262144. Passed
    Checking for wmem_max=262144; found wmem_max=262144. Passed
    Check complete. The overall result of this check is: Passed
    Check complete: Passed
    =====================================================
    2) also the GLIBC is already higher version with me..then why it shown me as fail
    Performing check for GLIBC
    Checking Recommended glibc version
    Expected result: ATLEAST=2.3.2-95.27
    Actual Result: 2.3.2-95.3
    Check complete. The overall result of this check is: Failed <<<<
    =====================================================
    3) Memory error
    Performing check for TotalMemory
    Checking physical memory requirements ...
    Expected result: 922MB
    Actual Result: 496MB
    Check complete. The overall result of this check is: Failed <<<<

  • Silent Installation of Oracle 10g on Windows XP

    Hi,
    I was trying out "SILENT INSTALLATION OF ORACLE 10g ON WINDOWS XP", where I was getting the following error. Can you please help me out.
    COMMAND GIVEN : D:\database>d:/disk1/setup.exe -responsefile d:/disk1/response/custom.rsp -silent -nowelcome
    ERROR THROWN : Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Preparing to launch Oracle Universal Installer from C:\DOCUME~1\RAVIKA~1\LOCALS~1\Temp\OraInstall2011-04-06_07-54-37AM. Please wait ... Oracle Universal Installer, Version 10.2.0.3.0 Production
    Copyright (C) 1999, 2006, Oracle. All rights reserved.
    You can find a log of this install session at:
    C:\Program Files\Oracle\Inventory\logs\installActions2011-04-06_07-54-37AM.log
    .................................................................................................... 100% Done.
    SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
    DEP_MODE(InstallType),
    TLDepModes(TopLevelInstallType)
    Silent install cannot continue.
    Please press Enter to exit...
    So I changed the "CUSTOM.RSP" response file parameters by adding
    DEP_MODE="EE"
    TLDepModes="EE"
    But it is still throwing me the error.
    REquesting you to help me out in this case.
    Thanks and REgards
    Ravikanth Garimella

    Pl identify exact versions of "10g" and "Windows XP". Pl also post the last 100 lines from the install log.
    Pl note that Home versions of Windows are not supported - http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#CHDHGGFE
    Pl see the Install Guide on how to use response files -
    http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/advance.htm#i634763
    http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/c_oui_appendix.htm#BABGHAIA
    HTH
    Srini

  • Oracle 10g db Silent installation error

    Hi All,
    I am getting this error while going for silent installation :
    SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
    DEP_MODE(InstallType),
    TLDepModes(TopLevelInstallType)
    Here is response file and execution summary :
    =============================================================
    $ ./runInstaller -silent -responseFile /dumps/oracle4linux/dvd/database/responsevenf
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-11-14_03-07-37AM. Please wait ...[oracle@hrmodev database]$ Oracle Universal Installer, Version 10.2.0.1.0 Production
    Copyright (C) 1999, 2005, Oracle. All rights reserved.
    You can find a log of this install session at:
    /arch/ptchdb/db/tech_st/10.2.0/admin/oui/PTCH_hrmodev/oraInventory/logs/installActions2008-11-14_03-07-37AM.log
    .................................................................................................... 100% Done.
    SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
    DEP_MODE(InstallType),
    TLDepModes(TopLevelInstallType)
    Silent install cannot continue.
    =============================================================
    Here is my response file :
    [General]
    RESPONSEFILE_VERSION=1.0.0.0.0
    [Session]
    #This entry is not used on Windows platforms
    #UNIX_GROUP_NAME;String;Used in Dialog
    #Group that the current user is part of, for ownership of the install files.
    UNIX_GROUP_NAME="dba"
    #FROM_LOCATION;String;Used in Dialog
    #Full path for the products.jar file.
    #Replace the X: with the drive letter of your CD-ROM device.
    FROM_LOCATION="/dumps/oracle4linux/dvd/database/stage/products.xml"
    #FROM_LOCATION_CD_LABEL;String:Used in multi-CD installations.
    #It includes the label of the Compact Disk where the file "products.jar" exists.
    #The label can be found in the file "disk.label" in the same directory as
    #"products.jar".
    #ORACLE_HOME;String;Used in Dialog
    #Enter the path to your oracle home. Replace the drive letter and optionally
    #alter the home path.
    ORACLE_HOME="/visapp/venforth/app/oracle/"
    #ORACLE_HOME_NAME;String;Used in Dialog
    #Enter the name of this oracle home. The name will be used to identify this
    #home.
    ORACLE_HOME_NAME="VENF"
    #TOPLEVEL_COMPONENT;StringList;Used in Dialog
    #Choices: "oracle.server", "8.1.5.0.0"
    #TOPLEVEL_COMPONENT={"oracle.server", "8.1.5.0.0"}
    #TOPLEVEL_COMPONENT={"oracle.rdbms","9.2.0.4.0"}
    TOPLEVEL_COMPONENT={"oracle.swd","2.2.1.2.0"}
    #SHOW_COMPONENT_LOCATIONS_PAGE;Boolean;Used in Dialog
    #Some components are flexible in where they are installed, although all have
    # default locations. Set this to FALSE if you want to accept the default locations
    # and not show this page.
    SHOW_COMPONENT_LOCATIONS_PAGE=false
    #SHOW_SUMMARY_PAGE;Boolean;Used in Dialog <---------------
    #MUST be <false> for "silent" install
    SHOW_SUMMARY_PAGE=false
    #SHOW_INSTALL_PROGRESS_PAGE;Boolean;Used in Dialog <---------------
    #MUST be <false> for "silent" install
    SHOW_INSTALL_PROGRESS_PAGE=false
    #SHOW_REQUIRED_CONFIG_TOOL_PAGE;Boolean;Used in Dialog
    SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
    #SHOW_OPTIONAL_CONFIG_TOOL_PAGE;Boolean;Used in Dialog
    SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
    #SHOW_END_SESSION_PAGE;Boolean;Used in Dialog <---------------
    #MUST be <false> for "silent" install
    SHOW_END_SESSION_PAGE=false
    #Parameter : LOCATION_FOR_DISK2
    #Type : String
    #Description : Complete path to the other disks.
    #Example : LOCATION_FOR_DISK2 = "..\..\Disk2"
    #LOCATION_FOR_DISK2="F:\teststage\cd\Disk3"
    #Parameter : NEXT_SESSION
    #Type : Boolean
    #Description : Set to true if the installer needs to go to the File Locations page for another installation.
    #Example : NEXT_SESSION = true
    NEXT_SESSION=false
    #Parameter : SHOW_SPLASH_SCREEN
    #Type : Boolean
    #Description : Set to true if the initial splash screen in the installer needs to be shown.
    #Example : SHOW_SPLASH_SCREEN = true
    SHOW_SPLASH_SCREEN=false
    #Parameter : SHOW_WELCOME_PAGE
    #Type : Boolean
    #Description : Set to true if the Welcome page in the installer needs to
    be shown.
    #Example : SHOW_WELCOME_PAGE = false
    SHOW_WELCOME_PAGE=false
    #Parameter : SHOW_ROOTSH_CONFIRMATION
    #Type : Boolean
    #Description : Set to true if the Confirmation dialog asking to run the root.sh script in the installer needs to be shown.
    #Valid only in Unix platforms.
    #Example : SHOW_ROOTSH_CONFIRMATION = true
    SHOW_ROOTSH_CONFIRMATION=false
    #Parameter : SHOW_EXIT_CONFIRMATION
    #Type : Boolean
    #Description : Set to true if the confirmation when exiting the installer needs to be shown.
    #Example : SHOW_EXIT_CONFIRMATION = true
    SHOW_EXIT_CONFIRMATION=false
    [oracle.server_8.1.5.0.0]
    #INSTALL_TYPE;String;Used in Dialog
    # Minimal - Optional pre-configured DB (b_createDB), Networking services, Server utilities
    # Typical - Pre-configured starter DB, Licensable options and Cartridges,
    # Networking services, Server utilities
    INSTALL_TYPE="Typical"
    DEP_MODE = Custom
    TLDepModes = Custom
    [oracle.rdbms_8.1.5.0.0]
    #OPTIONAL_CONFIG_TOOLS;StringList
    #OPTIONAL_CONFIG_TOOLS={"dbassist"} OR OPTIONAL_CONFIG_TOOLS={"Oracle Database Configuration Assistant"}
    #s_GlobalDBName;String;Used in Dialog
    #This is the name of the database which will be created as part of the typical install.
    #You should modify this string to use an appropriate name.
    s_GlobalDBName="VENF"
    #This entry not needed for Windows installation.
    #s_mountPoint;String;Used in Dialog
    #Database file location: directory for datafiles, control files, redo logs
    #s_mountPoint="/visapp/venforth/oradata/"
    #s_dbSid;String;Used in Dialog
    #Value for ORACLE_SID. Change this to an appropriate SID.
    s_dbSid="VENF"
    #b_createDB;Boolean
    #Relevant only in MINIMAL, set to TRUE if you want a starter database, set to FALSE if not.
    b_createDB=true
    Edited by: Kishore KVR on Nov 14, 2008 2:56 PM

    Hi,
    Have you checked for any errors in log file....????
    Can you connect via SQL*PLUS ... , for example...????
    Regards,
    Simon

  • How to rollback the oracle silent installation

    Hello Guys!
    i have one simple question related to the Oracle silent installation.
    I implemented embedded installation of Oracle in silent mode for my product.
    But i want to implement the rollback feature, i mean it should be possible to interrupt silent installation of Oracle s\w and it should be implemented in correct way. All installed files services should be removed, cleared all registry keys, cleared the inventory information etc.
    So if someone knows anything how to perform this functionality it will be great help for me. I see only two ways:
    1. To write something into the input stream of the process, like "stop", "cancel" ...
    Maybe it is funny idea
    2. The second way to perform termination of process and clear all information in scripts, but this is waste of time and may cause some addional errors at execution.
    3. So if you can help me thanks in advance
    Alex

    Hello Nicolas!
    yes you are very close to the theme. I used this codes but it is not what i am looking for now. I'll try to explain:
    ---------------------------------------- xx% ---------------------------------------
    | Oracle Installer is strated | ---------------> | Oracle istallation is done |
    ---------------------------------------- | ---------------------------------------
    | |
    | |
    | to interrupt installation
    | |
    |______________|
    go to the same state as before installation
    Thus do you know the best way how to implement this process:
    1. To interrupt silent installation of Oracle
    2. Rollback all changes made by interrupted setup program(some files are installed etc, but i don't need them since i had interrupted the installation process)
    So thanks for your answer
    Alex

  • Silent Installation Of Oracle 10g Expression Edition

    Plz i need information about how to install Oracle 10g Expression Edition silently on multiple computer.....i get this script from Oracle site:
    ** Response file to perform silent install of Oracle Database 10g Express Edition **
    ** Values for the following variables are configurable: **
    ** szDir - Provide a valid path **
    ** TNSPort - Provide any valid available port number **
    ** MTSPort - Provide any valid available port number **
    ** HTTPPort - Provide any valid available port number **
    ** SYSPassword - Provide a valid password string **
    ** bOpt1 - 1 or 0 : 1 launches the Database Homepage at end of install and 0 doesn't **
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-DlgOrder]
    Dlg0={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0
    Count=9
    Dlg1={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0
    Dlg2={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0
    Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013
    Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012
    Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014
    Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011
    Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0
    Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0]
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0]
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0]
    szDir=d:\oraclexe\TEST
    Component-type=string
    Component-count=1
    Component-0=DefaultFeature
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013]
    TNSPort=1521
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012]
    MTSPort=2030
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014]
    HTTPPort=8080
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011]
    SYSPassword=oracle
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0]
    Result=1
    [{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0]
    Result=1
    bOpt1=1
    bOpt2=0
    but i need how to link this script into the Setup file.
    i urgently need ur help bro.................. let me know if u have some idea to fix this problem.
    thz for advance.

    It is important to define which OS you are working with.
    Making a blind guess I will assume your are working on a windows environment (after this file fragment: "Dir=d:\oraclexe\TEST")
    In order to perform a silent install on a windows environment you should:
    - download the appropriate installation executable - eg. OracleXE.exe
         - download one of the silent install response file templates
         - edit the template with appropriate values for the install questions
         - run the Oracle XE installation and specify the location of the edited response file using a command similar to the following: OracleXE.exe /s /f1"<location of edited response file> /f2"<location of silent install log>
    ~ Madrid

  • Oracle 9.2.0.1 Standard Edition Silent Installation using Response file

    Does Oracle 9i Standard Edition come in 3 CDs??. I heard problems about providing response files to silent install Oracle 9.2.0.1 server.
    I am about receive a licensed copy of Oracle 9i and I am looking at creating a response file for silent installation.
    Is it necessary to copy contents of 3 CDs into one location on a harddrive on our users Server inorder for response file to work???
    We will be installing Oracle 9.2.0.1 on Win2000 server.
    I really appreciate any help.
    Thanks

    Hi,
    I'm going to work on this subject in the next few weeks on a Oracle Personal v9.2.0.1.0.
    I'll try to give you some informations if I can find something helpful for you.
    Can you please tell me if you have some informations on your side.
    Thanks.

Maybe you are looking for

  • Boot Camp safe to use with Time Machine?

    Is Boot Camp safe to use with Time Machine? I will be installing Windows on a partition and using an external hard drive to back up. I only want the Mac partition to be backed up, though, since Windows will just be used for applications which I can r

  • Boot Camp Drivers for Windows  7

    Hello... I just installed win7 on my Mac Mini with Boot Camp Assistant, but after installing and making the setup, I was not able to install the drivers from my SL DVD. Windows 7 can't read the disc and I cannot find the program to install my drivers

  • Flat File to Flat File

    Hi, I am doing an interface (Flat file to Flat file) The input file fields are separated by delimiter @!.Which will have multiple records like LEVEL1,LEVEL2,LEVEL3 Input Flat file Level1@!PoNo@!ShortText@!StDate@!EndDt@!Vendor@!Status Level2@!PoNo@!L

  • DBAdapter serious issue

    Sorry but I cant use this adapter here. Its very important to my job but we failed. I tried everything including redeploy adapter and reconfiguring it. A operação selecionada execute não pôde ser chamada. Ocorreu uma exceção ao chamar a operação de s

  • HT1918 How can I be able to fix a disabled iPad of mine

    My ipad is disabled