Oracle 9iLite download setup.exe file does not work

Like many people (I am discovering more by the minute), I am unable to install 9i Lite.5.01. When the setup.exe file is triggered, a hourglass appears for a second, then nothing...
I am installing on a windows 2000 terminal server, therefore I have to go through (Control Panel) Add/Remove Programs. The Oracle Universal Installer says that setup.exe is either a directory or is corrupt.
I have tried a couple of fixes suggested in this forum, such as unzipping the files to /install/disk, but to no avail. I have also tried downloading the software again, but with the same results.
Is there anyone out there who has successfully overcome this problem ?

Yes, there has been a problem reported with setup.exe on the Pentium 4 processor.
To overcome the problem, copy the contents of the CD on to your hard drive.
Then search for every occurence of the file symcjit.dll under the base directory where u have copied from your CD.
and rename them to symcjit.old.
Then launch setup.exe.
This should take care of the problem

Similar Messages

  • Setup.exe file does not run after the download

    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name East
    - Filename All the disks, 1 through 3, have been downloaded and extracted.
    - Date/Time Aug 7, 2002
    - Browser + Version
    - O/S + Version
    - Error Msg
    I am unable to run the setup.exe file in Disk1 directory. I think we need more information on how to install the server. Please help us ASAP.

    I found out that besides setting the library, I should also set the classpath.
    I tried to set the classpath by setting the environment variable CLASSPATH: path1.jar; path2.jar; path3.jar.
    I also tried to set it with the command prompt:
    CLASSPATH = path1.jar; path2.jar; path3.jar.
    But when double clicking on my .exe file, it still does not run and I still get the NoClassDefFoundError.
    Please help. Thanks!

  • I need to silently install the latest Mozilla firefox on Win7 machines, I do not see any .msi available and the /S or -S commands on the setup.exe installer does not work. Does someone know what can I do?

    I need the silent install of firefox for image deployment.

    For windows 7, you can use the -ms switch. For example, I have a batch file that works great. It contains the following:
    @ECHO.
    @Echo Installing Firefox
    @start /wait "Firefox Setup 3.6.10.exe" -ms
    However this does not seem to work well in windows XP. To get it to work in windows XP, I had to remove the spaces from the firefox installer and run the following command:
    @start /wait FirefoxSetup3.6.10.exe -ms
    If anyone has an easier way to get silent install working under XP (without renaming the firefox installer) please let me know!

  • GPIB in a LabView-application running as EXE-file does not work

    I try to connect an Instrument over GPIB and I use VISA from a Windows2000 PC without LabView installed. The GPIB-card is not from National Instruments. The Programm is running as EXE-application. What else do I have to install beside the EXE-file to access the Instrument?

    NI_VISA.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Adobe photoshop cs2 download on adobe website does not work-  the serial number does not work?

    photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?

    Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
    If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
    https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
    That S/N does work.  I double checked.

  • My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

    My iTunes, on my computer is not syncing anything at all. We have tried re-downloading it but it does not work. Someone please help me?

    Here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Re-Install CS2 on Win VISTA but setup.exe now does not respond

    I successfully installed and ran my legal, registered CS2 Production Premium on two different Win VISTA 64 machines, first on my  original desktop, then my current laptop, which is what I now use.
    Each time,  CS2 installed OK. I had learned the "trick" was to stop the installation  after the last program, before the suite proceeded to do the final  steps. If I failed to stop prior to those final steps, the error message  about registration occurred. If I stopped prior to the conclusion of  the installation, then each program worked fine.
    HOWEVER...  I recently downloaded and installed CS5 demo, then removed CS5. I had uninstalled CS2 in preparation (because of disk space and potential conflicts). I cleaned the registry, as I also did after uninstalling CS5.
    When  I went to re-install CS2 (using the original legal disks), now the setup.exe program DOES NOTHING. It  whirs when clicked, as if it's launching, then sits idle, not performing any tasks.  I've let it "try" for hours, but no results.
    I have: clicked on the file from Windows Explorer, I have opened a command line window and run e:\>Setup.exe, I have even copied the disk to the desktop and tried to run Setup.exe from there. There is never an error message. There is only no activity whatsoever from setup.exe.
    During the  time of the last successful CS2 installation and the current attempt to  install, there have been several Vista updates installed on the  machine.
    So, I have successfully run CS2 on Vista 64,  but not since removing the CS5 demo. My system is a multi-core AMD 64-bit processor running Windows Vista Home Premium Build 6002 with all Microsoft updates applied. (And yes, having not had any paying  job in almost three years, I cannot figure out a way to fund the  upgrade...and, of course, Adobe has cut off support of any kind for  CS2.)
    Does anyone have experience and a solution?

    CS2 is completely unsupported under Vista and Win 7. 64 bit makes it even more difficult.
    Unfortunately, you're on your own here. Best bet would be to upgrade to CS5 and you should take note of the fact that if you don't and you wait til CS6 ships you will be out of the upgrade loop altogether and will have to pay full price.
    Bob

  • LabVIEW_8.2.1_Runtime_Engine.exe file does not exist

    The web-link reports the following error when trying to download the run-time engine.
    ISA Server: extended error message :
    200 Type okay.
    200 PORT command successful.
    550 No such file.
    This is the NI URL used to try the download from
    http://digital.ni.com/softlib.nsf/websearch/03682807D12868CD862572C300519E72?opendocument&node=13207...

    Does not work for me either. 
    I did find a link that seems to work though.    http://joule.ni.com/nidu/cds/view/p/id/550/lang/en
    Message Edited by centerbolt on 10-02-2007 07:55 AM

  • How do I set Firefox 10.0.2 to be default browser in Windows 7, using a script or setup switch. "Firefox.exe -setDefaultBrowser" does NOT work.

    I want to set Firefox as default browser for all my users.
    I can do this by opening Firefox and go to Tools --> Options --> Advanced and hit the "Check now" button. That works fine, but I need to accomplish this automatically.
    Running setup with the -setDefaultBrowser switch does NOT work. Running "firefox.exe -silent -SetDefaultBrowser" after setup does NOT work.
    Is this even possible? Or are we stuck with IE?

    Thank you for your reply, however it really does not work for me.
    I have Firefox installed, as well as Internet Explorer 9. If I check "Default Programs --> Set Default Programs" in Windows 7 it states that Internet Explorer is default.
    If I create a shortcut on my desktop that points to "www.mozilla.org" for example, and double-click that shortcut, it will open in Internet Explorer.
    I now run "%ProgramFiles%\Mozilla Firefox\Firefox.exe -silent -setDefaultBrowser" with administrative privileges.
    I look again in "Default programs" and i still says IE is default browser. If I click on my shortcut it still opens in IE.
    If I change the setting manually from within Firefox it works fine.
    Please help, I really can't make this work.

  • "Always ask me where to save files" does not work.

    Summary: The "Always ask me where to save files" feature does not work. No dialog box comes up, apparently because the browser is stuck on a bad old read-only lastDir location, in a prefs.js file that I can't edit.
    Details:
    I am using Firefox 30.0 on Mac OS 10.6.8. My Mac has a both a read/write Mac partition that I use most of the time, and a bootcamp Windows partition drive ("C"), which I can read but not write to.
    At some point I accidentally tried to download a file from a site, using Firefox, to the read-only Windows C drive. Ever since that time, I have not been able to download any files from Firefox, except to the firefox/downloads folder. This is inconvenient. If, in preferences, I try to set downloads to ""Always ask me where to save files", the dialog box does not come up when I actually try to save files. This problem does not apply to saving photos by right-clicking them.
    If I open, in text-edit, mozilla/firefox/profiles/t4vockvue.default/prefs.js, which was saved yesterday, I can see a problematic line. It reads:
    user_pref("browser.download.lastDir", "C:\\Documents and Settings\\[etcetc]");
    C:\\Documents and Settings\\[etcetc] being the read-only windows directory.
    This prefs.js is apparently not an editable file.
    I tried to fix this by opening a browser tab in Firefox and opening about:config. The editable browser.download.lastDir does NOT show the same "lastDir"....it shows some directory that I successfully downloaded photos to, by right-clicking on a photo.
    How can I fix this problem?
    Thanks.

    To confirm which profile folder is active when you are running Firefox, it is easiest to open it from inside Firefox as follows:
    Sometimes the file that stores the customizations becomes corrupted and fails to update properly at the end of your session. You can rename the file and customize from scratch.
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    In the first table on the page, click the "Show in Finder" button (Windows: "Show Folder" button).
    Hopefully you are using a separate profile folder on each OS.

  • Link in pdf-file does not work on Ipad

    With my site www.bartkuijer.nl I offer visitors the free possibility to see (and download) sheetmusic, from music written by me. These are pdf-files. But they can not only SEE the sheetmusic; the music on that pdf-files can also be PLAYED. That's done bij clicking on a link in that pdf-file to a mp3-file of the music on my site.
    This works fine on a pc. When I try this on the Ipad of my wife it DOES NOT WORK!
    So my question is: how come? And what to do to make this work also fine on an Ipad.
    This is important for me, because I want this sheetmusic to place as Ipad-apps for free.

    It works!
    But not with a pdf-file. The Ipad does not recognize links in a pdf-file.
    Te solution is found by making a htm-file with emdedding a quicktime-player and images of the music. This is my first Ipad product. On a pc the player starts immediately; on the Ipad it has to be started.
    Now I have to work on a solution to change this to an app

  • Oracle Applications 11i Export to Excel does not work.

    The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!

    Please post the details of the application release, database version and OS.
    The export button does not work. When I click on export it says complete but does not bring up a window asking me to save. I have pop up blocker off and the site added to trusted sites. I have tried everything I have found so far but no luck. Help would be much appreciated.....thanks!!!!Was this working before? If yes, any changes been done recently?
    Can you reproduce the issue from other browsers/machines?
    Can you find any errors in the database log file?
    Please see these docs/links.
    Troubleshooting Export and Attachment issues in Oracle Applications 11i [ID 338651.1]
    Attachments and Exports, a Troubleshooting Guide [ID 135444.1]
    Export To Excel: How To Activate Debugging? [ID 464469.1]
    How to Troubleshoot Forms Hanging Using Export Functionality [ID 423261.1]
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshoot+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Troubleshooting+AND+Export&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Export+AND+Excel&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Call-Off and Forecast Excel-File does not work anymore?

    The Excel-file e-mail sent does not work any more (Excel says: "The following system error occured: .") when opened with Microsoft Office 2010, which I have on my new
    computer with Windows 7 Professional x64.
    The file is quite important for checking order and forecast quantities retrieved via OLAP-task from 101AS.
    Many thanks in advance for your help.
    ICT ASKNW
    PS: When i use Excel 2007 all work fine. But when i clean Install Excel 2010 it wont work anymore. So but when i upgrade 2007 to 2010 it still working? Can it be true that a
    file of the 2007 Edition is missing on 2010? Thanks for your help!

    Hi Sir,
    Would you like to share us the whole error message? The following system error occured:... We need it to check the issue.
    If you have any update, please feel free let us know.
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Shortcut for downloads window in Safari does not work

    Hi everybody,
    My shortcut for downloads window in Safari (command-option-L) does not work anymore, when i press that combination of buttons, iTunes appears in my screen.
    Can i do something to bring back my shortcut?
    Santiago

    Ok...
    Try troubleshooting the Safari .plist file.
    Quit Safari.
    Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Now launch Safari. Try the keyboard shortcut for the Downloads window. If it didn't help, just move that .plist file back to the Preferences folder.
    Also, go to your Safari menu bar click Safari/Reset Safari. Select the top 7 buttons, click Reset. Restart your Mac. That might help too.

  • Hyperlink to a music file does not work, Am I doing it incorrectly?

    Hello there. I am a composer, trying to add all my music samples to the website. I created a title of one of the music samples, then hyperlinked it to that corresponding music file (mp3), so, when you click on that title, it links it to THAT music file. But, it does not work when I click on the link. If I assign the link to another page for example, the link works. What am I doing wrong here. Or is this not possible? I would hate to have a whole list of music files on one page, especially with that "add image here" box on every one of them.
    Any help would be greatly appreciated. Thanks

    The file has to be uploaded to your server and then linked to as an external page using the Inspector/Link/Hyperlink pane with the option to open in a new window.
    You'll get the same effect as with the music example in this demo page but with a full sized window instead of a smaller one: Opening Item in a New, Precisely Sized Window.
    This method would let you add the links to all of your songs to one page. Or you could use a music jutebox for those songs like Roddy has on his iWeb for Musicians site:
    Jukebox Alive
    Juke It Jukebox
    This would reduce your site size considerably. But all these methods require you to upload the audio files to the server and link to them there.

Maybe you are looking for

  • Battery drained and will not charge

    the battery on my droid ultra completely drained last night and I plugged it in to the wall charger this morning and it is not responding. Has anyone let their battery drain all the way ans had issues getting it to charge? It has been plugged in for

  • ISE 1.1 - switch ignores "Session-Timeout"

    hi all, I'm playing around with ISE guest service and have some difficulty with Time Profiles. After guest logs in, Radius attributes are sent to the switch (3750G) one of them is Session-Timeout which should be similar to 1h (DefaultOneHour) Accordi

  • Search entire message not working in Mail, but Spotlight works.

    I am having a problem where my mail App is not searching the entire body of the message any more. I installed Lion soon after it was released, and I believe that it has been working up until recently. If I do a search, it won't search the message bod

  • OIM 11g requestDataset not reflected

    All, I am using OIM 11g. I want to provide resouce attr details during provision request. I have created a dummy resource object with field name employeeid. firstname,lastname,Created a dataset as ProvisionDummyResouceDataSet.xml Dataset --> <?xml ve

  • Screensaver from slideshow Pictures folder has bad resolution

    Since Leopard, I have noticed that almost every other picture in the screensaver slideshow (from the "pictures Folder") has a very low resolution resulting in blocky slides.