Oracle ADF 11g Essentials Certification

Hi,
I am planning to start preparation for this exam 1Z0-554.
Can you please suggest good book for the same.
Thanks

963235 wrote:
Hi,
I am planning to start preparation for this exam 1Z0-554.
Can you please suggest good book for the same.
ThanksAs far as I am aware there is unlikely to be a book focused specifically on this exam.
The start point is to review the exam topics and other information at:
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=5001&get_params=p_exam_id:1Z0-554&p_org_id=28&lang=US
Do a gap analysis (difference) between what topics you know well, and what you need to revise further, and for those decide whether you can revised from documentation or obtain general purpose books to cover the rest.
If you are employed by an Oracle Partner you have some additional resources available. If you are not you have to put in a little more hard work yourself.
You might get lucky and find some advice here: {forum:id=923}
... Probably not the answer you hoped for, but the best i can give. Others may know differently.

Similar Messages

1Z1-514 Oracle Database 11g Essentials for Implementors

Hi Guys
What shall i study in order to prepare the exam 1Z1-514 Oracle Database 11g Essentials for Implementors that is in Beta?
My manager have no budget to training courses.'
Please help me...

haggy_fleisch wrote:
Hi Guys
What shall i study in order to prepare the exam 1Z1-514 Oracle Database 11g Essentials for Implementors that is in Beta?
My manager have no budget to training courses.'
Please help me...The obvious answer is to study the exam topics on [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_514]
Hmmm ..... there again looking at your biography I believe Pompey Lil can help you best .... ;-)
More seriously have a go at the two day dba guide from [http://www.oracle.com/pls/db112/homepage] the have another gap analysis and see you you feel.
Also view [http://blogs.oracle.com/certification/2008/10/question_of_the_day_how_to_pre.html]
Rgds - bigdelboy.

Oracle ADF 11g – Authentication using Custom ADF Login Form Problem

Hi Guys,
I am trying to Authenticate my adf application using custom Login Form.
following this..
http://www.fireboxtraining.com/blog/2012/02/09/oracle-adf-11g-authentication-using-custom-adf-login-form/#respond
But my Login Page is not Loading.I think its sending request in chain.my jdev version is 11.1.1.5.Any Idea.
Thanks,
Raul

Hi Frank,
I deleted bounded code and In another Unit Test I created a simple login.jspx page and applied form based authentication but still facing same problem means something wrong in starting.
My login.jspx page is
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document id="d1" >
      <af:form id="f1" >
        <af:panelFormLayout id="pfl1">
          <af:inputText label="USERNAME" id="it1"
                        />
          <af:inputText label="PASSWORD" id="it2"
                          />
          <af:commandButton text="LOG IN" id="cb1" />
          <f:facet name="footer">
          </f:facet>
        </af:panelFormLayout>
      </af:form>
    </af:document>
</f:view>
</jsp:root>
Don't know wht real problem is

ORACLE ADF 11g /JSF TO serviet (Service method) not invoking

Hi,
ORACLE ADF 11g /JSF TO serviet (Service method) not invoking
My project name is : ComplProject
inside the project im having 1 jsp say x.jsp
work environment : (oracleADF 11g) jdev11 and weblogic server 10.3
in x.jsp im displaying 1 go link -> when ever we click on GO link it should go to ComplServlet.java
i tried like,
FacesContext.getCurrentInstance().getExternalContext().redirect("/servlet/ComplServlet");
the "ComplServlet" is an URL pattern in web.xml which points to servlet.
but not working
i pointed to faces-config.xml also , not working
i tried to forward like
FacesContext context = FacesContext.getCurrentInstance();
ServletContext sContext = (ServletContext)context.getExternalContext().getContext();
ServletRequest request = (ServletRequest)context.getExternalContext().getRequest();
System.out.println("third line...............");
HttpServletResponse response = (HttpServletResponse)context.getExternalContext().getResponse();
response.sendRedirect("/servlet/ViewDocument");
sContext.getRequestDispatcher("/servlet/ViewDocument").include(request, response);
brief
(from jsf page) after clicking on GO LINK i need to redirect or control should go to servlet ->service method
thanks in advance
regards,
sandeep

Hi,
i tried like,
FacesContext.getCurrentInstance().getExternalContext().redirect("/servlet/ComplServlet");
the "ComplServlet" is an URL pattern in web.xml which points to servlet.
but not workingUse like following.
    public HttpServletRequest getServletRequest() {
        return (HttpServletRequest)facesContext.getExternalContext().getRequest();
    public redirect(String url){
       getServletRequest().sendRedirect(getServletRequest().getContextPath() + "/servlet/ComplServlet");
    }If you are using golink as frank suggested then use it like this.
<af:goLink text="ComplServlet" destination="/servlet/ComplServlet"/>no need of using context when using goLink,
Regards,
Santosh.

Oracle ADF 11G R1 and 11G R2 and Internet Explorer 11 Support

Hello,
We are using Oracle ADF 11G R2 (11.1.2.4), and now that Microsoft has pushed Internet Explorer 11 to Windows 7 and Windows 8 computers, we are finding that our application is not working with IE11.
You get the popup that states "You are using an unsupported browser", and while everything renders on the screen, the application does not respond to user clicks.
Does anyone have workaround for IE11, and if anyone from Oracle is reading, can you give any tentative guidelines for IE11 support.
Thanks.

Here's one workaround
Jonas de Graaff weblog: How to run your ADF 11.1.x application under IE 11: a workaround
http://jonasdegraaff.blogspot.nl/2013/11/how-to-run-your-adf-111x-application.html

Oracle ADF 11g

Wondering if there is a Oracle ADF 11g Video site ? Site where all ADF 11g sample example clips are consolidated ?
I did like ADF videos here http://blogs.oracle.com/shay/
wanted to know more such video sites exclusive ADF 11g
thx
pp

Hi,
You can find more here http://www.oracle.com/technology/products/jdev/tips/fnimphius/index.html at ADF Code Corner Internet TV section.
Regards,
Pino

1Z0-536-ENU Oracle Exadata 11g Essentials

Hi,
Does anybody take this exam [1Z0-536-ENU Oracle Exadata 11g Essentials], I wonder if I can have sample questions for the same.
Thank you,

I dont think we have much material for this, but in future we may have some stuff.
Please share good links if any....Thanks in advance.

Any books for Oracle ADF 11g certification

Hi,
I am planning to take oracle ADF certification (Oracle Application Development Framework Certified Implementation ). Any suggestion on books and reading materials?
Regards,
Kumar

There are currently three ADF books:
The Quick Start Guide to Fusion Development JDeveloper and Oracle ADF - written by me!
The JDeveloper Handbook - Mills et all
The Fusion Developer Guide - Nimphius and Munsinger.
Having been involved in developing the exam, any of the books will help you. If you want to get some practical experience on ADF (which is important for the exam) then we will be announcing a new set of collateral to help you - I will announce this on my blog, hopefully next week. (blogs.oracle.com/grantronald)
HOpe this helps
Grant

2 or more cascading selectonechoice in Oracle ADF 11g Rel 2

Hi,
I want to have 2 (later more) cascading (depending) selectonechoice component.
The first combobox (partners) will be filled with the result of a SQL view object (PartnerLovView) execution, this query has NO (bind) parameter and only has one primary key as id and a name column (SELECT partnerId, partnerName FROM Partner ORDER BY partnerName).
The second combobox (partner sites) has empty default value. This combobox will be filled with the result of a SQL view object (PartnerSiteLovView) execution, this query HAS a parameter (p_partnerId) and has one primary key as id, one foreign key for partner (partnerId) and a name column (SELECT partnerSiteId, partnerId, partnerSiteName FROM PartnerSite WHERE partnerId = :p_partnerId ORDER BY partnerSiteName).
I can't achieve to bind the two comboboxes. I've dropped from the AppModuleDataControl the PartnerLovView1 to the JSF page as "Single Selection --> ADF Select One Choice... and also dropped the PartnerSiteLovView1 as same (this combo depends on the first combo selected value).
In this case I get error something like: IN, OUT parameter missing, what is true because select need the parameter value. But how to bind it?
I've set the autoSubmit to true for the first combo and partialTrigger property to the first combo id of the second combo.
If a modify the (depending) second SQL and removed the paramter from base query and added a view criteria, this combo will filled but no reaction if I submit the first combo.
How and where to bind the first combo selected value to the second combo?

Hi Shay,
thank You for your answer.
The first solution doesn't meet my use case: I have two (later more for addinitonal) separate queries. No join.
Second solution: can You give me some concrete source code? In the valuechangeListener I always got the label of the selected value not the real value (id). I've followed Your code with [getting value|https://blogs.oracle.com/shay/entry/getting_the_value_from_a_selec].
Later I will be use more dependent comboboxes, this combos will prefilter a tree, and the tree will prefilter a table. Please send me (throw email) your contact too, because I need somebody who can help me, and maybe I send you my project use cases.
Thanks
Bye

Master Detail Screen in Oracle ADF 11g

Hi Gurus,
I am facing an issue with the master detail page. The page is meant for entring master detial information. The page has two view objects based on entity objects which are based upon the master and detail tables.
I am using the Jdeveloper version 11.1.2.3.0 ( Jdeveloper 11g release 2). on Windows 7 on the embedded weblogic server ( included in the jdeveloper).
Structure of Master and Detail Table are
Master (pk1,attr1,attr2);
Detail (pk1,pk2,attr1,attr2);
The detail table is having a composite primary key in which pk1 is a foreign key and pk2 is incremented for each pk1, hence the value is like (1,1), (1,2),(1,3) ... etc.
Now i have created a create insert operation in the page from the detail view object. And for generating the new pk2 value in the detail row i have written the logic in the doDML() method of the detail entity object.
    protected void doDML(int operation, TransactionEvent e) {
        System.out.println(operation);
        if (operation == DML_INSERT) {
                DBTransaction trans = getDBTransaction();
                String sql = "select max(nvl(pk2,0))+1 from xyz_detail where pk1="+this.getPk1().toString();
                System.out.println(sql);
                PreparedStatement pstmt =trans.createPreparedStatement(sql,0);
                try{
                ResultSet rs = pstmt.executeQuery();
                    rs.next();
                    System.out.println(rs.getString(1));
                    this.setPk2(rs.getString(1));
                    rs.close();
                } catch (SQLException excp){
                        this.setPk2("Error");
                        System.out.println("Inside exception");
                    excp.printStackTrace();
        super.doDML(operation, e);
    }Now , when i am creating a single record and commiting the transaction the value of the pk2 in detail is generated and saved properly, how ever when i am generating multiple rows at once and then commitng the transaction noting is being done, neither the value of pk2 is being generated nor the rows afre commited please guide me accordingly.
May be the answer of this question be in the behaviour of DBTransation , i am creating multiple rows and the calling the #{bindings.commit.execute} , what is the behaviuor of this commit, i think it should commit all the uncommited work, and apart from this as the logic is written in the doDML() method it must fire for every row of data created in detail once.
Please Guide me accordingly.

Hi,
try these ways: override a create method in the Entity or use a groovy expression for default value of the attribute
this post uses a sequence but it's the same
http://one-size-doesnt-fit-all.blogspot.com.es/2009/03/adf-bc-using-groovy-to-fetch-sequence.html

Oracle ADF 11G R1 and Internet Explorer 11 Support

Hello,
I need to write my own post even if issue is written on this thread (https://forum.java.sun.com/thread/2602720) Because i suppose that post writer reached to his useful workaround and no activity seems for a couple of months.
Use 11.1.1.6 and Win8.1 IE11
I did not find any solution or workaround which runs properly. Any comments are welcome.
merry christmast

The reason for this is that there is no solution at the moment. Oracle is working on one. Also check https://groups.google.com/forum/m/#!msg/adf-methodology/NP4g98AvrCw/uYf_cvDna_0J
To my knowledge you have to open a SR with support.oracle.com and ask them for help to get the back port of the solution once it's ready.
If you have a support contract you'll find a note for IE11 THERE too.
Timo

Oracle Primavera EPPM Essentials Certification

Hi all,
I want to know details about Oracle Primavera EPPM Certification Details. I am Planning to take up Certification on P6 8.3 Version, If any one has taken or already in process of taking Certification, Please guide me on Preparation and recommended books.
Thanks in Advance.
Ravikumar

You will get all information about primavera certification at - https://competencycenter.oracle.com/opncc/full_glp.cc;jsessionid=a977c535702dc8a10e3b23440ef31203e57e05bb96d516e7ae43c91d4c8a80dd.e38Mc34PaxyPbO0LbhqQax8La30Qe0?group_id=16873

Implement Search Engine in Oracle ADF 11g

Hi All,
I am using Oracle jDev 11.1.1.5.0
I want to implement Search Engine within my application.
User of my application will search for anything which is very related to my application only.
User can't use it like Google/Yahoo/..etc.
He/She can only search for the things which are stored in my Database only.
Is it possible?
If yes, then how should I proceed?
Appreciate your help.
Thanks and Regards,
Madhav K
Edited by: Madhav on Mar 9, 2012 3:59 AM
Edited by: Madhav on Mar 9, 2012 4:33 AM

Hi Navneeth,
Thanks for your reply.
I heard about this for the first time from you. I read about this on Google.
I think this is a new separate big software.
Can you please look at this,
http://docs.oracle.com/cd/E10502_01/doc/install.1018/e10464.pdf
and tell me is this the one which you are talking about?
Is there any other way to implement search engine within my application?
Bacause I think this software is a very big software.
Thanks and Regards,
Madhav K.

Disabling tooltip in Oracle ADF 11g

Dear All,
Is there anyway to disable the Tooltip for the Application globally . As of now, we have this "shortDesc" attribute defined in all our component.
Thanks in advance.
Regards
Deivee

Hi Navneeth,
Thanks for your reply.
I heard about this for the first time from you. I read about this on Google.
I think this is a new separate big software.
Can you please look at this,
http://docs.oracle.com/cd/E10502_01/doc/install.1018/e10464.pdf
and tell me is this the one which you are talking about?
Is there any other way to implement search engine within my application?
Bacause I think this software is a very big software.
Thanks and Regards,
Madhav K.

Oracle ADF 11g : Invoke managed bean method on page resize.

Given the following code:
<af:clientListener method="getElementWidth"
                                   type="propertyChange"/>
                <af:serverListener type="customEvent"
                                   method="#{columnSizeBean.handleRequest}"/>Is there a client listener that can be triggered on browser window resize ?
Something like:
<af:clientListener method="getElementWidth"
                                   type="[[[[something like a window resize]]]]]]"/>
                <af:serverListener type="customEvent"
                                   method="#{columnSizeBean.handleRequest}"/>NOTE:
getElementWidth is a javascript method in my current code, while columnSizeBean is a sessionScope bean that is doing some computations on a table column width.
Edited by: Andrei C. on May 18, 2010 5:49 AM

Hi,
no there is not. However, in this case you can use vanilla JavaScript and register to the browser DOM to receive the event notification. If you rceive the notification you access the server Listener you put on the af:document component. This should work
Frank

Oracle ADF 11g Essentials Certification

Similar Messages

Maybe you are looking for